WTware Technical Support

Write mail to license@wtware.com

No way. Argon fan software is written on Python. Python interpreter is larger than WTware itself. Kick Argon so that they write system software on C.

BTW, native Raspberry fan driver for Pi PoE HAT is written on C, embedded in kernel and works out-of-box.

USB speakers may work. I don't know solution for jack speaker and usb mic.

"2. Remove all lines from terminal configuration file. Absolutely all." is important.
Error is about sound.

This config is wrong: printer=usb rdp_printer=Argox OS-214 plus PPLA:usb 1664:019a These are two different methods to share the same printer. Remove one line and try. If it won't work, remove another line. After you find one line that works for you, connect both printers and send me log: https://wtw...

1. This log is incomplete. There should be many lines in the end.
2. Also try this line:

microphone = on, hw:1:0

There are no errors in this log. I need log intermediately after the error appears to find error reason. Do not reboot: log in memory will be lost. You may start logging, and terminal will send log to configurator until you close configurator application or reboot terminal.

No uptime on web now. What is all the stats?

h264 AVC444 hardware acceleration. For now works only for Raspberry, because on Raspberry it's uniform. Later will be for x86. All graphic is compressed by the same codec, not only video. It noticeably lods server processors. In WTware is turned on by default. If won't draw correctly, turn it off by...

There is no interface to edit this setting on web interface. You can download initrd.wtc file ("files in /config folder"), edit in Notepad and upload it back.

Kic wrote: ↑

Tue Feb 09, 2021 1:32 pm

Is there a way to reconfigure this parameter and set the IP addres of the new server or do we need to create a new RPi image?

Press Del to enter Setup at the beginning of RPi boot (if you didn't disable Setup during RPi SD Card creation).

Don't know. We have no Pi 400.

Just copying C:\ProgramData\WTware\ to the new server will be enough? No. You should understand which services "server" offers to terminals. Just copying C:\ProgramData\WTware\ to the new server is not needed if your RPis store configuration files on SD Cards and take IP addresses from so...

WTware writes several lines to log when RDP server accesses microphone for the first time. I don't see attempts to record sound in this log. Config file is correct and driver detected hardware. But no request to microphone from server. Did you save this log after you tried to use microphone? Did dif...

I see no problems with printer in this log.

Did you try to print before saving it?

Did you configure windows side? Here is the manual: https://wtware.com/docs5/printer.html

Also, make the same log with "printer=usb,debug"