WTware RDP client

Hello,

we encounter some issues with Samsung Galaxy A3 devices, or in generell with mobilephones which should be connected to the raspberry in order to transfer images/files.

either in mtp or filemode the android device shows not up in the explorer. usb sticks are working fine.

ive attached the ...

Hi,
just a quick question - is it possible that the "ask_password" setting can be configured with 2 parameters?
we need the option to bypass the broker and also to disable the smartcard login with "nopin"
so basically the line should look like this "ask_password = on, nopin"

Hi,
I managed to get it working again, there was a driver issue which caused the problem

hi,

we encountered an issue with a smartcard reader omnikey "omni3021" - a week ago we configured following:
smartcard=omni3021

and installed the safesign software on the server and it recognizes the smartcardreader an also the card. now we wanted to test something else, but we can't get it ...

after a new deployment of the wtware version on the sdcard, everything was working - mabye something got corrupted

Hello,

we discovered some issues with the new 5.8.14 version of wtware on RPI 3B+

in the config file we specified "disk=usb" and with version 5.6.24 and 5.6.25 the usb devices were working without a problem.
With the new version, the following below happens, but the device isn't showing up in the ...

abtest wrote: Tue Feb 06, 2018 12:07 pm with that on, when the password expires after a set amount of days it cant be changed when the user tries to log in.

hi, do you have the same or an similar behaviour regarding a password which is expired?

the portrait mode with video=i915(f) isn't working as expected.


the portrait mode with video=any-driver(f) isn't working as expected. Only video=..(U).


so there is no chance to get it working? - cause we need a solution for turning monitor around 90 degrees, with clients which have 2 ...

again another problem :D - hopefully we can also fix this issue:

the portrait mode with video=i915(f) isn't working as expected.
in log1 file you can see the display parameter with portrait mode, both screens stay black
in log2 file you can see the M2_display parameter with portrait mode, both ...

tried to change credssp to rdp - but also with no luck.
do you have any special configuration?

Update: I only receive the dialog, if I try to login to testserver via windows 10 notebook and mstsc, than the dialog appears and I'm able to change the password.
If I try to login via wtware on raspberry ...

so, also the zbox is working - it was a bad dvi cable, which worked.
thank you very much

so, its working with your config mentioned above - but only with version 5.6.24 - I'm not able to upgrade bios, tried it with bios recovery from usb device - but its not working.
Altough its good thats not working, cause couple users have problem with the latest bios release from hp -> https ...

ok, think there is a strange behaviour - tried it on our 2016 test rds server without a broker.

after login, the user receives the message to change password -> hit ok -> and then the loginscreen in attachment2 appears - but its not possible to login

maybe its a CredSSP thing - going to try a few ...

so, now its also running on HP260 with version 5.6.24 (5.6.25 kernel error posted above)

the hdmi display is running alone - with 2 monitors, both stay black and i receive following error (log)

I tried it with

tried it with following, but 2nd screen stays black: