By default WTWare sends a register command to linphonec when starting up. When all of my WTWare SIP clients have registered the registration response packets from the SIP proxy get rather large due to all SIP client registering using the same credentials, which causes the packets to go outside of the normal MTU boundaries causing UDP fragmentation due to the large number of contacts. There is nothing I can do on the SIP proxy to prevent this behavior, but unregistering the linphonec client allows outbound calls to be made from WTWare.
My request is to add a checkbox to prevent automatic SIP registration on startup of linphonec. This effect of this is that instead of sending a register command as is currently done:
Code: Select all
[ gm] [ 49.778932] [SIP] Command: 'register sip:0000@dialpad.example.com dialpad.example.com **password**'.
[ SIP] [ 49.778993] linphonec> Receiving command 'register sip:0000@dialpad.example.com dialpad.example.com *'
Code: Select all
[proxy_0]
reg_proxy=sip:dialpad.example.com
reg_identity=sip:0000@dialpad.example.com
reg_sendregister=0
publish=0
dial_escape_plus=0
[auth_info_0]
username=0000
passwd=**password**
realm="dialpad.example.com"
Please let me know if you need additional information. Thank you!