I'm still using the last free version of wtware and am trying to connect my RPi 3b+ to my TV and connect to my virtual WIN 10 machine via RDP.
At first I had the problem that part of the display was basically show outside of the TV, i.e. I could press the WIN button to access the menu but I couldn't see the WIN button as it was "outside" the TV. I fixed that by un-commenting this line in my config: disable_overscan=0
The problem I am struggling with right now is to get the full HD resolution. Here is my condensed config (I removed all commented lines for easier reading).
With this config, connecting to my 4k TV and checking my resolution via http://whatismyscreenresolution.net/ I get: 1459x787
In my opinion this is the relevant config part:
Code: Select all
hdmi_drive=2
hdmi_group=1
hdmi_mode=16
Code: Select all
# Uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan.
disable_overscan=0
# Force the monitor to HDMI mode so that sound will be sent over HDMI cable.
hdmi_drive=2
disable_splash=1
# Uncomment for 16-bit color. It is up to two
# times faster than default 32-bit.
#framebuffer_depth=16
framebuffer_depth=32
# Enable onboard audio (HDMI or jack).
dtparam=audio=on
# Enable improved audio driver
# https://www.raspberrypi.org/forums/viewtopic.php?f=29&t=136445
audio_pwm_mode=2
# hdmi_group options
#0 Auto-detect from EDID
#1 CEA (Consumer Electronics Association, the standard typically used by TVs)
#2 DMT (Display Monitor Timings, the standard typically used by monitors)
# use for TV
hdmi_group=1
hdmi_mode=16
#hdmi_group=1 hdmi_mode alternatives
#16 1080p 60Hz
#34 1080p 30Hz
# use for Monitor
#hdmi_group=2
#hdmi_mode=69
#hdmi_group=2 hdmi_mode alternatives
#69 = 1920x1200
#82 = 1920x1080
###edit###
I forgot to mention that I boot from SD card and everything is saved on the card, no network boot, no DHCP options are set. I simply want to be able to do some light office work on my TV without having to go fetch my laptop
###edit2###
In case it matters, here is my config.wtc file on the SD card inside the configs folder:
Code: Select all
server=local.network.win10.server
keyboard=de
display=1920x1200, HDMI
ntp=pool.ntp.org
scale_factor=125
disk=usb
printer=usb
timezone=W. Europe Standard Time
sound=on
sound_rate=44100