i did the boot without using sd and it worked. but now i have no clue how to revert back to it not doing this.
everytime i plug in the RPi3, it trys to netboot i want to stop it go back to raspberry pi 3 normal factory settings
Boot no sd card - how to undo
Re: Boot no sd card - how to undo
Install good, not broken boot SD. It netboots AFTER it fails to boot from SD.
-
- Posts: 2
- Joined: Sun Feb 25, 2018 7:55 am
Re: Boot no sd card - how to undo
is there away to remove WT from it so it dont even try? or im stuck with it now trying to NetBoot into WT only
Re: Boot no sd card - how to undo
After writing this programmable SD Pi will always:
- try to boot from SD
- if fails boot by network.
There is no undo and it's not related to wtware. While programming network boot, we execute this raspberry developer's manual: https://www.raspberrypi.org/documentati ... des/msd.md
If you don't need network boot, insert good working SD with what you want to see on Raspberry.
- try to boot from SD
- if fails boot by network.
There is no undo and it's not related to wtware. While programming network boot, we execute this raspberry developer's manual: https://www.raspberrypi.org/documentati ... des/msd.md
If you don't need network boot, insert good working SD with what you want to see on Raspberry.