"connect_timeout=5" is not working to time out connection to unreachable RDP server, it takes like two minutes :
Code: Select all
11-55-40-992| WTware 5.6.24/RPi supervisor.
11-55-40-992| [ KERNEL] [ 0.000000] Booting Linux on physical CPU 0x0
11-55-40-992| [ KERNEL] [ 0.000000] Linux version 4.9.75 (aka@c16) (gcc version 7.2.0 (Debian 7.2.0-11) ) #5 SMP Wed Jan 10 12:35:54 EST 2018
11-55-40-992| [ KERNEL] [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
11-55-40-992| [ KERNEL] [ 0.000000] CPU: div instructions available: patching division code
11-55-40-992| [ KERNEL] [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
11-55-40-992| [ KERNEL] [ 0.000000] OF: fdt:Machine model: Raspberry Pi 3 Model B Rev 1.2
11-55-40-992| [ KERNEL] [ 0.000000] cma: Reserved 8 MiB at 0x3ac00000
11-55-40-992| [ KERNEL] [ 0.000000] Memory policy: Data cache writealloc
11-55-40-992| [ KERNEL] [ 0.000000] On node 0 totalpages: 242688
11-55-40-992| [ KERNEL] [ 0.000000] free_area_init_node: node 0, pgdat 80c22b80, node_mem_map ba3a1000
11-55-40-992| [ KERNEL] [ 0.000000] Normal zone: 2133 pages used for memmap
11-55-40-992| [ KERNEL] [ 0.000000] Normal zone: 0 pages reserved
11-55-40-992| [ KERNEL] [ 0.000000] Normal zone: 242688 pages, LIFO batch:31
11-55-40-992| [ KERNEL] [ 0.000000] percpu: Embedded 11 pages/cpu @ba367000 s15948 r8192 d20916 u45056
11-55-40-992| [ KERNEL] [ 0.000000] pcpu-alloc: s15948 r8192 d20916 u45056 alloc=11*4096
11-55-40-992| [ KERNEL] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
11-55-40-992| [ KERNEL] [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 240555
11-55-40-992| [ KERNEL] [ 0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1024 bcm2708_fb.fbheight=768 bcm2708_fb.fbdepth=32 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 hide_setup config_timeout=10 quiet wtboot=mmc
11-55-40-992| [ KERNEL] [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
11-55-40-992| [ KERNEL] [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
11-55-40-992| [ KERNEL] [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
11-55-40-992| [ KERNEL] [ 0.000000] Memory: 941160K/970752K available (5120K kernel code, 143K rwdata, 920K rodata, 5120K init, 365K bss, 21400K reserved, 8192K cma-reserved)
11-55-40-992| [ KERNEL] [ 0.000000] Virtual kernel memory layout:
11-55-40-992| [ KERNEL] [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
11-55-40-992| [ KERNEL] [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
11-55-40-992| [ KERNEL] [ 0.000000] vmalloc : 0xbb800000 - 0xff800000 (1088 MB)
11-55-40-992| [ KERNEL] [ 0.000000] lowmem : 0x80000000 - 0xbb400000 ( 948 MB)
11-55-40-992| [ KERNEL] [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
11-55-40-992| [ KERNEL] [ 0.000000] .text : 0x80008000 - 0x80600000 (6112 kB)
11-55-40-992| [ KERNEL] [ 0.000000] .init : 0x80700000 - 0x80c00000 (5120 kB)
11-55-40-992| [ KERNEL] [ 0.000000] .data : 0x80c00000 - 0x80c23e38 ( 144 kB)
11-55-40-992| [ KERNEL] [ 0.000000] .bss : 0x80c25000 - 0x80c805e0 ( 366 kB)
11-55-40-992| [ KERNEL] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
11-55-40-992| [ KERNEL] [ 0.000000] Hierarchical RCU implementation.
11-55-40-992| [ KERNEL] [ 0.000000] Build-time adjustment of leaf fanout to 32.
11-55-40-992| [ KERNEL] [ 0.000000] NR_IRQS:16 nr_irqs:16 16
11-55-40-992| [ KERNEL] [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys).
11-55-40-992| [ KERNEL] [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
11-55-40-992| [ KERNEL] [ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
11-55-40-992| [ KERNEL] [ 0.000015] Switching to timer-based delay loop, resolution 52ns
11-55-40-992| [ KERNEL] [ 0.000217] Console: colour dummy device 80x30
11-55-40-992| [ KERNEL] [ 0.000231] console [tty0] enabled
11-55-40-992| [ KERNEL] [ 0.000247] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
11-55-40-992| [ KERNEL] [ 0.000260] pid_max: default: 32768 minimum: 301
11-55-40-992| [ KERNEL] [ 0.000391] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
11-55-40-992| [ KERNEL] [ 0.000398] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
11-55-40-992| [ KERNEL] [ 0.001237] Disabling memory control group subsystem
11-55-40-992| [ KERNEL] [ 0.001288] CPU: Testing write buffer coherency: ok
11-55-40-992| [ KERNEL] [ 0.001621] CPU0: update cpu_capacity 1024
11-55-40-992| [ KERNEL] [ 0.001629] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
11-55-40-992| [ KERNEL] [ 0.001653] Setting up static identity map for 0x100000 - 0x100034
11-55-40-992| [ KERNEL] [ 0.003193] CPU1: update cpu_capacity 1024
11-55-40-992| [ KERNEL] [ 0.003200] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
11-55-40-992| [ KERNEL] [ 0.003772] CPU2: update cpu_capacity 1024
11-55-40-992| [ KERNEL] [ 0.003778] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
11-55-40-992| [ KERNEL] [ 0.004345] CPU3: update cpu_capacity 1024
11-55-40-992| [ KERNEL] [ 0.004351] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
11-55-40-992| [ KERNEL] [ 0.004430] Brought up 4 CPUs
11-55-40-992| [ KERNEL] [ 0.004438] SMP: Total of 4 processors activated (153.60 BogoMIPS).
11-55-40-992| [ KERNEL] [ 0.004442] CPU: All CPU(s) started in HYP mode.
11-55-40-992| [ KERNEL] [ 0.004445] CPU: Virtualization extensions available.
11-55-40-992| [ KERNEL] [ 0.004986] devtmpfs: initialized
11-55-40-992| [ KERNEL] [ 0.014700] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
11-55-40-992| [ KERNEL] [ 0.015082] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
11-55-40-992| [ KERNEL] [ 0.015097] futex hash table entries: 1024 (order: 4, 65536 bytes)
11-55-40-992| [ KERNEL] [ 0.015570] pinctrl core: initialized pinctrl subsystem
11-55-40-992| [ KERNEL] [ 0.016096] NET: Registered protocol family 16
11-55-40-992| [ KERNEL] [ 0.017989] DMA: preallocated 1024 KiB pool for atomic coherent allocations
11-55-40-992| [ KERNEL] [ 0.028176] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
11-55-40-992| [ KERNEL] [ 0.111191] bcm2835-dma 3f007000.dma: DMA legacy API manager at bb80f000, dmachans=0x1
11-55-40-992| [ KERNEL] [ 0.113521] usbcore: registered new interface driver usbfs
11-55-40-992| [ KERNEL] [ 0.113642] usbcore: registered new interface driver hub
11-55-40-992| [ KERNEL] [ 0.113727] usbcore: registered new device driver usb
11-55-40-992| [ KERNEL] [ 0.120132] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-01-08 14:28
11-55-40-992| [ KERNEL] [ 0.122452] clocksource: Switched to clocksource arch_sys_counter
11-55-40-992| [ KERNEL] [ 0.137330] NET: Registered protocol family 2
11-55-40-992| [ KERNEL] [ 0.137902] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
11-55-40-992| [ KERNEL] [ 0.138009] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
11-55-40-992| [ KERNEL] [ 0.138193] TCP: Hash tables configured (established 8192 bind 8192)
11-55-40-992| [ KERNEL] [ 0.138278] UDP hash table entries: 512 (order: 2, 16384 bytes)
11-55-40-992| [ KERNEL] [ 0.138319] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
11-55-40-992| [ KERNEL] [ 0.138491] NET: Registered protocol family 1
11-55-40-992| [ KERNEL] [ 2.439641] workingset: timestamp_bits=14 max_order=18 bucket_order=4
11-55-40-992| [ KERNEL] [ 2.499423] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
11-55-40-992| [ KERNEL] [ 2.499435] io scheduler noop registered
11-55-40-992| [ KERNEL] [ 2.499440] io scheduler deadline registered (default)
11-55-40-992| [ KERNEL] [ 2.512909] BCM2708FB: allocated DMA memory fad10000
11-55-40-992| [ KERNEL] [ 2.512961] BCM2708FB: allocated DMA channel 0 @ bb80f000
11-55-40-992| [ KERNEL] [ 2.535617] Console: switching to colour frame buffer device 128x48
11-55-40-992| [ KERNEL] [ 2.548241] bcm2835-rng 3f104000.rng: hwrng registered
11-55-40-992| [ KERNEL] [ 2.548367] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
11-55-40-992| [ KERNEL] [ 2.548905] vc-sm: Videocore shared memory driver
11-55-40-992| [ KERNEL] [ 2.557857] zram: Added device: zram0
11-55-40-992| [ KERNEL] [ 2.557895] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
11-55-40-992| [ KERNEL] [ 2.786027] Core Release: 2.80a
11-55-40-992| [ KERNEL] [ 2.786037] Setting default values for core params
11-55-40-992| [ KERNEL] [ 2.786060] Finished setting default values for core params
11-55-40-992| [ KERNEL] [ 2.986417] Using Buffer DMA mode
11-55-40-992| [ KERNEL] [ 2.986423] Periodic Transfer Interrupt Enhancement - disabled
11-55-40-992| [ KERNEL] [ 2.986426] Multiprocessor Interrupt Enhancement - disabled
11-55-40-992| [ KERNEL] [ 2.986433] OTG VER PARAM: 0, OTG VER FLAG: 0
11-55-40-992| [ KERNEL] [ 2.986463] Dedicated Tx FIFOs mode
11-55-40-992| [ KERNEL] [ 2.987027] WARN::dwc_otg_hcd_init:1032: FIQ DMA bounce buffers: virt = 0xbad04000 dma = 0xfad04000 len=9024
11-55-40-992| [ KERNEL] [ 2.987050] FIQ FSM acceleration enabled for :
11-55-40-992| [ KERNEL] [ 2.987050] Non-periodic Split Transactions
11-55-40-992| [ KERNEL] [ 2.987050] Periodic Split Transactions
11-55-40-992| [ KERNEL] [ 2.987050] High-Speed Isochronous Endpoints
11-55-40-992| [ KERNEL] [ 2.987050] Interrupt/Control Split Transaction hack enabled
11-55-40-992| [ KERNEL] [ 2.987056] dwc_otg: Microframe scheduler enabled
11-55-40-992| [ KERNEL] [ 2.987099] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x80397770
11-55-40-992| [ KERNEL] [ 2.987108] WARN::hcd_init_fiq:460: FIQ ASM at 0x80397ad4 length 36
11-55-40-992| [ KERNEL] [ 2.987117] WARN::hcd_init_fiq:486: MPHI regs_base at 0xbb925000
11-55-40-992| [ KERNEL] [ 2.987170] dwc_otg 3f980000.usb: DWC OTG Controller
11-55-40-992| [ KERNEL] [ 2.987203] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
11-55-40-992| [ KERNEL] [ 2.987233] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
11-55-40-992| [ KERNEL] [ 2.987279] Init: Port Power? op_state=1
11-55-40-992| [ KERNEL] [ 2.987282] Init: Power Port (0)
11-55-40-992| [ KERNEL] [ 2.987459] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
11-55-40-992| [ KERNEL] [ 2.987468] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
11-55-40-992| [ KERNEL] [ 2.987475] usb usb1: Product: DWC OTG Controller
11-55-40-992| [ KERNEL] [ 2.987482] usb usb1: Manufacturer: Linux 4.9.75 dwc_otg_hcd
11-55-40-992| [ KERNEL] [ 2.987490] usb usb1: SerialNumber: 3f980000.usb
11-55-40-992| [ KERNEL] [ 2.988215] hub 1-0:1.0: USB hub found
11-55-40-992| [ KERNEL] [ 2.988250] hub 1-0:1.0: 1 port detected
11-55-40-992| [ KERNEL] [ 2.988905] dwc_otg: FIQ enabled
11-55-40-992| [ KERNEL] [ 2.988909] dwc_otg: NAK holdoff enabled
11-55-40-992| [ KERNEL] [ 2.988912] dwc_otg: FIQ split-transaction FSM enabled
11-55-40-992| [ KERNEL] [ 2.988927] Module dwc_common_port init
11-55-40-992| [ KERNEL] [ 2.989269] usbcore: registered new interface driver usbtouchscreen
11-55-40-992| [ KERNEL] [ 2.990256] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
11-55-40-992| [ KERNEL] [ 2.990622] bcm2835-cpufreq: min=600000 max=1200000
11-55-40-992| [ KERNEL] [ 2.991749] sdhost-bcm2835 3f202000.sdhost: could not get clk, deferring probe
11-55-40-992| [ KERNEL] [ 2.994175] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
11-55-40-992| [ KERNEL] [ 2.996705] ledtrig-cpu: registered to indicate activity on CPUs
11-55-40-992| [ KERNEL] [ 2.996885] hidraw: raw HID events driver (C) Jiri Kosina
11-55-40-992| [ KERNEL] [ 2.997653] usbcore: registered new interface driver usbhid
11-55-40-992| [ KERNEL] [ 2.997659] usbhid: USB HID core driver
11-55-40-992| [ KERNEL] [ 2.998787] vchiq: vchiq_init_state: slot_zero = 0xbad80000, is_master = 0
11-55-40-992| [ KERNEL] [ 3.013762] [vc_sm_connected_init]: start
11-55-40-992| [ KERNEL] [ 3.021011] [vc_sm_connected_init]: end - returning 0
11-55-40-992| [ KERNEL] [ 3.021269] NET: Registered protocol family 17
11-55-40-992| [ KERNEL] [ 3.021418] Registering SWP/SWPB emulation handler
11-55-40-992| [ KERNEL] [ 3.021853] registered taskstats version 1
11-55-40-992| [ KERNEL] [ 3.026300] sdhost: log_buf @ bad07000 (fad07000)
11-55-40-992| [ KERNEL] [ 3.102464] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
11-55-40-992| [ KERNEL] [ 3.104559] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
11-55-40-992| [ KERNEL] [ 3.104563] mmc-bcm2835 3f300000.mmc: DMA channel allocated
11-55-40-992| [ KERNEL] [ 3.182530] of_cfs_init
11-55-40-992| [ KERNEL] [ 3.182584] of_cfs_init: OK
11-55-40-992| [ KERNEL] [ 3.196137] Freeing unused kernel memory: 5120K
11-55-40-992| [ KERNEL] [ 3.202842] Indeed it is in host mode hprt0 = 00021501
11-55-40-992| [ KERNEL] [ 3.272318] mmc0: host does not support reading read-only switch, assuming write-enable
11-55-40-992| [ KERNEL] [ 3.273818] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
11-55-40-992| [ KERNEL] [ 3.275800] mmc0: new high speed SDHC card at address aaaa
11-55-40-992| [ KERNEL] [ 3.276199] mmcblk0: mmc0:aaaa SL08G 7.40 GiB
11-55-40-992| [ KERNEL] [ 3.276435] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
11-55-40-992| [ KERNEL] [ 3.277866] mmcblk0: p1
11-55-40-992| [ KERNEL] [ 3.278111] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
11-55-40-992| [ hotplug] [ 3.277900] Block device 179:0. No action.
11-55-40-992| [ hotplug] [ 3.277977] Block device 179:1. No action.
11-55-40-992| [ KERNEL] [ 3.280914] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
11-55-40-992| [ KERNEL] [ 3.283987] random: fast init done
11-55-40-992| [ KERNEL] [ 3.370276] mmc1: new high speed SDIO card at address 0001
11-55-40-992| [ KERNEL] [ 3.412508] usb 1-1: new high-speed USB device number 2 using dwc_otg
11-55-40-992| [ KERNEL] [ 3.412746] Indeed it is in host mode hprt0 = 00001101
11-55-40-992| [ hotplug] [ 3.463422] Block device 254:0. No action.
11-55-40-992| [ pfac] [ 3.514734] Run /sbin/initrd.
11-55-40-992| [ pfac] [ 3.514843] Ok, PID 607.
11-55-40-992| [ initrd] [ 3.517890] WTware shell 5.6.24/RPi
11-55-40-992| [ initrd] [ 3.539764] HDD/MMC/SD boot.
11-55-40-992| [ KERNEL] [ 3.652710] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
11-55-40-992| [ KERNEL] [ 3.652722] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
11-55-40-992| [ KERNEL] [ 3.653436] hub 1-1:1.0: USB hub found
11-55-40-992| [ KERNEL] [ 3.653524] hub 1-1:1.0: 5 ports detected
11-55-40-992| [ KERNEL] [ 3.972484] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
11-55-40-992| [ KERNEL] [ 4.102695] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
11-55-40-992| [ KERNEL] [ 4.102705] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
11-55-40-992| [ KERNEL] [ 4.212479] usb 1-1.3: new low-speed USB device number 4 using dwc_otg
11-55-40-992| [ KERNEL] [ 4.346549] usb 1-1.3: New USB device found, idVendor=045e, idProduct=0797
11-55-40-992| [ KERNEL] [ 4.346560] usb 1-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
11-55-40-992| [ KERNEL] [ 4.346567] usb 1-1.3: Product: USB Optical Mouse
11-55-40-992| [ KERNEL] [ 4.352000] input: USB Optical Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:045E:0797.0001/input/input0
11-55-40-992| [ KERNEL] [ 4.352586] hid-generic 0003:045E:0797.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-3f980000.usb-1.3/input0
11-55-40-992| [ KERNEL] [ 4.462482] usb 1-1.5: new low-speed USB device number 5 using dwc_otg
11-55-40-992| [ KERNEL] [ 4.596922] usb 1-1.5: New USB device found, idVendor=13ba, idProduct=0018
11-55-40-992| [ KERNEL] [ 4.596933] usb 1-1.5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
11-55-40-992| [ KERNEL] [ 4.596940] usb 1-1.5: Product: Barcode Reader
11-55-40-992| [ KERNEL] [ 4.601861] input: Barcode Reader as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:13BA:0018.0002/input/input1
11-55-40-992| [ KERNEL] [ 4.663589] hid-generic 0003:13BA:0018.0002: input,hidraw1: USB HID v1.10 Keyboard [Barcode Reader ] on usb-3f980000.usb-1.5/input0
11-55-40-992| [ KERNEL] [ 4.670845] input: Barcode Reader as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.1/0003:13BA:0018.0003/input/input2
11-55-40-992| [ KERNEL] [ 4.732971] hid-generic 0003:13BA:0018.0003: input,hidraw2: USB HID v1.10 Mouse [Barcode Reader ] on usb-3f980000.usb-1.5/input1
11-55-40-992| [ initrd] [ 5.004639] Success: media /dev/mmcblk0p1 mounted to /bootmedia.
11-55-40-992| /--- FILE "/bootmedia/config.txt" -----------------------
11-55-40-992| | ##### start of default config
11-55-40-992| | # For more options and information see
11-55-40-992| | # http://www.raspberrypi.org/documentation/configuration/config-txt.md
11-55-40-992| | # Some settings may impact device functionality. See link above for details
11-55-40-992| | # Uncomment if you get no picture on HDMI for a default "safe" mode.
11-55-40-992| | #hdmi_safe=1
11-55-40-992| | # Uncomment this if your display has a black border of unused pixels visible
11-55-40-992| | # and your display can output without overscan.
11-55-40-992| | #disable_overscan=1
11-55-40-992| | # Uncomment if hdmi display is not detected and composite is being output.
11-55-40-992| | #hdmi_force_hotplug=1
11-55-40-992| | # Uncomment to force a specific HDMI mode (this will force VGA).
11-55-40-992| | #hdmi_group=1
11-55-40-992| | #hdmi_mode=1
11-55-40-992| | # Force the monitor to HDMI mode so that sound will be sent over HDMI cable.
11-55-40-992| | #hdmi_drive=2
11-55-40-992| | # Uncomment to increase signal to HDMI, if you have interference, blanking, or
11-55-40-992| | # no display.
11-55-40-992| | #config_hdmi_boost=4
11-55-40-992| | # Uncomment to overclock the arm. 700 MHz is the default.
11-55-40-992| | #arm_freq=800
11-55-40-992| | #disable_splash=1
11-55-40-992| | #hdmi_group=2
11-55-40-992| | # 800x600: hdmi_mode=9
11-55-40-992| | # 1024x768: hdmi_mode=16
11-55-40-992| | # 1280x1024: hdmi_mode=35
11-55-40-992| | # 1360x768: hdmi_mode=39
11-55-40-992| | # 1400x1050: hdmi_mode=42
11-55-40-992| | # 1440x900: hdmi_mode=47
11-55-40-992| | # 1600x1200: hdmi_mode=51
11-55-40-992| | # 1680x1050: hdmi_mode=58
11-55-40-992| | # 1366x768: hdmi_mode=81
11-55-40-992| | # 1920x1080: hdmi_mode=82
11-55-40-992| | # 1920x1200: hdmi_mode=69
11-55-40-992| | framebuffer_depth=32
11-55-40-992| | # Uncomment for 16-bit color. It is up to two
11-55-40-992| | # times faster than default 32-bit.
11-55-40-992| | #framebuffer_depth=16
11-55-40-992| | # Enable onboard audio (HDMI or jack).
11-55-40-992| | dtparam=audio=on
11-55-40-992| | # Removes the warning overlay.
11-55-40-992| | #avoid_warnings=1
11-55-40-992| | # Additionally allows turbo when low-voltage is present.
11-55-40-992| | #avoid_warnings=2
11-55-40-992| | ########
11-55-40-992| | ########start of alon custom config
11-55-40-992| | #
11-55-40-992| | # uncomment if hdmi display is not detected and composite is being output
11-55-40-992| | hdmi_force_hotplug=1
11-55-40-992| | # Set monitor mode to DMT (Display Monitor Timings, the standard typically used by monitors).
11-55-40-992| | # This setting should be used in conjunction with hdmi_mode.
11-55-40-992| | hdmi_group=2
11-55-40-992| | # Set monitor resolution to 1024x768 75Hz
11-55-40-992| | hdmi_mode=18
11-55-40-992| | # Set monitor resolution to 1024x768 70Hz
11-55-40-992| | #hdmi_mode=17
11-55-40-992| | # Set monitor resolution to 1024x768 60Hz
11-55-40-992| | #hdmi_mode=16
11-55-40-992| \----------------------------------------------------
11-55-40-992| [ initrd] [ 5.009770] WTpassword present: 8f1d84c8c4f7b28c635485df53bad234.
11-55-40-992| /--- FILE "/bootmedia/configs/initrd.wtc" -----------------------
11-55-40-992| | [BOM]
11-55-40-992| | clientIP=*
11-55-40-992| | config=network
11-55-40-992| | tftpIP=192.168.200.83
11-55-40-992| | setupPassword=8f1d84c8c4f7b28c635485df53bad234
11-55-40-992| \----------------------------------------------------
11-55-40-992| [ initrd] [ 7.017112] Load ethernet drivers.
11-55-40-992| [ initrd] [ 7.020983] modprobe smsc95xx.
11-55-40-992| [ KERNEL] [ 7.030701] smsc95xx v1.0.5
11-55-40-992| [ KERNEL] [ 7.125987] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:6d:49:18
11-55-40-992| [ KERNEL] [ 7.126255] usbcore: registered new interface driver smsc95xx
11-55-40-992| [ KERNEL] [ 7.214389] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
11-55-40-992| [ KERNEL] [ 8.681785] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
11-55-40-992| [ initrd] [ 8.715149] WTpassword present: 8f1d84c8c4f7b28c635485df53bad234.
11-55-40-992| [ initrd] [ 11.020175] dhcp: 346 bytes from 192.168.192.254.
11-55-40-992| [ initrd] [ 11.020310] 00000000:0000014600000000001100000A01C0FE0A01C056004300440146000002010601 ...F..............V.C.D.F......
11-55-40-992| [ initrd] [ 11.020382] 00000020:67458B6B00000000000000000A01C0560A01C80F00000000B827EB6D49180000 gE.k...........V.........'.mI..
11-55-40-992| [ initrd] [ 11.020452] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
11-55-40-992| [ initrd] [ 11.020519] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
11-55-40-992| [ initrd] [ 11.020585] 00000080:0000000000000000000000000000000000000000000000000000000000000000 ................................
11-55-40-992| [ initrd] [ 11.020652] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................
11-55-40-992| [ initrd] [ 11.020719] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................
11-55-40-992| [ initrd] [ 11.020786] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................
11-55-40-992| [ initrd] [ 13.270170] dhcp: 346 bytes from 192.168.192.254.
11-55-40-992| [ initrd] [ 13.270298] 00000000:0000014600000000001100000A01C0FE0A01C056004300440146000002010601 ...F..............V.C.D.F......
11-55-40-992| [ initrd] [ 13.270391] 00000020:67458B6B00000000000000000A01C0560000000000000000B827EB6D49180000 gE.k...........V.........'.mI..
11-55-40-992| [ initrd] [ 13.270459] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
11-55-40-992| [ initrd] [ 13.270526] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
11-55-40-992| [ initrd] [ 13.270592] 00000080:0000000000000000000000000000000000000000000000000000000000000000 ................................
11-55-40-992| [ initrd] [ 13.270659] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................
11-55-40-992| [ initrd] [ 13.270725] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................
11-55-40-992| [ initrd] [ 13.270791] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................
11-55-40-992| [ initrd] [ 13.310093] [DHCP] DHCP server address 192.168.200.15.
11-55-40-992| [ initrd] [ 13.310165] [DHCP] IP 192.168.192.86 mask 255.255.255.0.
11-55-40-992| [ initrd] [ 13.310233] [DHCP] Default gateway 192.168.192.254.
11-55-40-992| [ initrd] [ 13.310297] [DHCP] DNS 192.168.200.15.
11-55-40-992| [ initrd] [ 13.310362] [DHCP] DNS 192.168.200.14.
11-55-40-992| [ initrd] [ 13.310425] [DHCP] NTP 192.168.200.15.
11-55-40-992| [ initrd] [ 13.310490] [DHCP] Domain contoso.com.
11-55-40-992| [ initrd] [ 13.310554] [DHCP] TFTP IP 192.168.200.83 already specified.
11-55-40-992| [ initrd] [ 13.310619] [DHCP] No boot file from DHCP.
11-55-40-992| [ initrd] [ 13.310683] [DHCP] TFTP binary "", configs prefix "", using "/" slash.
11-55-40-992| WTC listener is active.
11-55-40-992| WTC broadcast listener is active.
11-55-40-992| Send broadcast WTCU discover.
11-55-40-992| [ initrd] [ 13.312298] Run '/sbin/httpd', log '/tmp/httpd.out', env '', pid ''.
11-55-40-992| [ pfac] [ 13.312831] Run /sbin/httpd.
11-55-40-992| [ pfac] [ 13.312936] Ok, PID 649.
11-55-40-992| [ httpd] [ 13.318310] HTTP Server, WTware 5.6.24/RPi
11-55-40-992| [ initrd] [ 13.432480] USB: 13ba:0018 PCPlay Barcode PCP-BCG4209.
11-55-40-992| [ initrd] [ 13.432617] USB: 045e:0797 Microsoft Corp. Optical Mouse 200.
11-55-40-992| [ initrd] [ 13.432691] USB: 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter.
11-55-40-992| [ initrd] [ 13.432762] USB: 0424:9514 Standard Microsystems Corp. SMC9514 Hub.
11-55-40-992| [ initrd] [ 13.432831] [TFTP] Download config file Everyone/list.wtc from 192.168.200.83.
11-55-40-992| [ initrd] [ 13.456599] [TFTP] WTware TFTP v.5.6.24.
11-55-40-992| [ initrd] [ 13.459693] [TFTP] Download config file Terminals/B8.27.EB.6D.49.18/config.wtc from 192.168.200.83.
11-55-40-992| /--- FILE "/tmp/config.wtc" -----------------------
11-55-40-992| | template Hash-123
11-55-40-992| | connection xyz
11-55-40-992| | connection 123
11-55-40-992| | connection 456
11-55-40-992| | next screen
11-55-40-992| | connection 123
11-55-40-992| | connection 456
11-55-40-992| \----------------------------------------------------
11-55-40-992| [ initrd] [ 13.461875] [TFTP] Download config file Everyone/all.wtc from 192.168.200.83.
11-55-40-992| /--- FILE "/tmp/all.wtc" -----------------------
11-55-40-992| | [BOM]
11-55-40-992| | server=tcmgr.contoso.com; 192.168.200.83
11-55-40-992| \----------------------------------------------------
11-55-40-992| [ initrd] [ 13.464870] [TFTP] Download config file Templates/Hash-123.wtc from 192.168.200.83.
11-55-40-992| /--- FILE "/tmp/tmp.wtc" -----------------------
11-55-40-992| | [BOM]
11-55-40-992| | server=tcmgr.contoso.com; 192.168.200.83
11-55-40-992| | vnc=on
11-55-40-992| | vnc_password=hex:a4f4fc5d544013bebad157016fgtuhjv
11-55-40-992| | display=1024x768
11-55-40-992| | skin=pk
11-55-40-992| | managed=192.168.200.0/24
11-55-40-992| | httpd=on
11-55-40-992| \----------------------------------------------------
11-55-40-992| [ initrd] [ 13.467844] [TFTP] Download config file Connections/xyz.wtc from 192.168.200.83.
11-55-40-992| /--- FILE "/tmp/tmp.wtc" -----------------------
11-55-40-992| | [BOM]
11-55-40-992| | server=192.168.99.99
11-55-40-992| | connect_timeout=5
11-55-40-992| \----------------------------------------------------
11-55-40-992| [ initrd] [ 13.470666] [TFTP] Download config file Connections/123.wtc from 192.168.200.83.
11-55-40-992| /--- FILE "/tmp/tmp.wtc" -----------------------
11-55-40-992| | [BOM]
11-55-40-992| | server=192.168.100.30
11-55-40-992| | domain=contoso
11-55-40-992| \----------------------------------------------------
11-55-40-992| [ initrd] [ 13.473433] [TFTP] Download config file Connections/456.wtc from 192.168.200.83.
11-55-40-992| /--- FILE "/tmp/tmp.wtc" -----------------------
11-55-40-992| | [BOM]
11-55-40-992| | server=192.168.100.50
11-55-40-992| | domain=contoso
11-55-40-992| \----------------------------------------------------
11-55-40-992| [ initrd] [ 13.476210] [TFTP] Download config file Connections/123.wtc from 192.168.200.83.
11-55-40-992| /--- FILE "/tmp/tmp.wtc" -----------------------
11-55-40-992| | [BOM]
11-55-40-992| | server=192.168.100.30
11-55-40-992| | domain=contoso
11-55-40-992| \----------------------------------------------------
11-55-40-992| [ initrd] [ 13.478489] [TFTP] Download config file Connections/456.wtc from 192.168.200.83.
11-55-40-992| /--- FILE "/tmp/tmp.wtc" -----------------------
11-55-40-992| | [BOM]
11-55-40-992| | server=192.168.100.50
11-55-40-992| | domain=contoso
11-55-40-992| \----------------------------------------------------
11-55-40-992| [ initrd] [ 13.482137] Remount /bootmedia for writing.
11-55-40-992| [ initrd] [ 13.483151] Remount /bootmedia as read-only.
11-55-40-992| [ KERNEL] [ 13.484628] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
11-55-40-992| /--- FILE "/etc/config.compiled" -----------------------
11-55-40-992| | [BOM]
11-55-40-992| | server=tcmgr.contoso.com; 192.168.200.83
11-55-40-992| | vnc=on
11-55-40-992| | vnc_password=hex:a4f4fc5d544013bebad157016fgtuhjv
11-55-40-992| | display=1024x768
11-55-40-992| | skin=pk
11-55-40-992| | managed=192.168.200.0/24
11-55-40-992| | httpd=on
11-55-40-992| | connection xyz
11-55-40-992| | server=192.168.99.99
11-55-40-992| | connect_timeout=5
11-55-40-992| | connection 123
11-55-40-992| | server=192.168.100.30
11-55-40-992| | domain=contoso
11-55-40-992| | connection 456
11-55-40-992| | server=192.168.100.50
11-55-40-992| | domain=contoso
11-55-40-992| | next screen
11-55-40-992| | connection 123
11-55-40-992| | server=192.168.100.30
11-55-40-992| | domain=contoso
11-55-40-992| | connection 456
11-55-40-992| | server=192.168.100.50
11-55-40-992| | domain=contoso
11-55-40-992| \----------------------------------------------------
11-55-40-992| [ initrd] [ 13.496333] Hostname: "wtwB837EB5D4582".
11-55-40-992| [ initrd] [ 13.760638] Run '/usr/sbin/ntpdate -bs 192.168.200.15', log '', env '', pid ''.
11-55-40-992| [ pfac] [ 13.760774] Run /usr/sbin/ntpdate -bs 192.168.200.15.
11-55-40-992| 192.168.200.0/24 can control terminal by RSH.
11-55-40-992| RSH: listener is active.
11-55-40-992| Send broadcast WTCU discover.
11-55-40-992| [ pfac] [ 13.762432] Ok, PID 650.
11-55-40-992| [ httpd] [ 13.766486] Reread settings.
11-55-40-992| [ httpd] [ 13.766613] Everyone can control terminal by HTTP.
11-55-40-992| [ gm] [ 13.771527] WTware session manager 5.6.24/RPi.
11-55-40-992| [ gm] [ 13.773612] Add keyboard event2: Barcode Reader .
11-55-40-992| [ gm] [ 13.773709] Add keyboard event1: Barcode Reader .
11-55-40-992| [ gm] [ 13.840116] EV_REL flag found. Add mouse event0: USB Optical Mouse.
11-55-40-992| [ gm] [ 13.840333] Display mode: 1024x768, 32 bit, landscape, 0 Hz, modeline "", DDC enabled, connector 0.
11-55-40-992| [ gm] [ 13.853357] Framebuffer device found.
11-55-40-992| [ gm] [ 13.853435] LINELENBYTES 4096
11-55-40-992| [ gm] [ 13.853510] VLEN 3145728
11-55-40-992| [ gm] [ 13.867587] Use /lib/ui32.so.
11-55-40-992| [ gm] [ 13.868066] [TFTP] Download config file Graphic/pk/menu.png from 192.168.200.83.
11-55-40-992| [ gm] [ 14.562107] [TFTP] Download config file Graphic/pk/popup.png from 192.168.200.83.
11-55-40-992| [ gm] [ 14.568864] [TFTP] Download config file Graphic/pk/saver.png from 192.168.200.83.
11-55-40-992| [ gm] [ 14.658712] [TFTP] Download config file Graphic/pk/wait.png from 192.168.200.83.
11-55-40-992| [ KERNEL] [ 14.684343] random: crng init done
11-55-40-992| [ gm] [ 14.934740] Everyone can control terminal by VNC.
11-55-40-992| [ gm] [ 14.934882] [VNC] Listener at port 5900.
11-55-40-992| [SYSLOG] <29>Jan 14 09:54:53 ntpdate[650]: step time server 192.168.200.15 offset -31154722.929155 sec
11-55-40-992| [ pfac] [ 19.873864] Process pid 650 terminated, status 00000000.
11-55-40-992| [ gm] [ 22.984407] Run '/sbin/resolver 0xae9d80 dns [192.168.99.99]', log '', env '', pid ''.
11-55-40-992| [ pfac] [ 22.984548] Run /sbin/resolver 0xae9d80 dns [192.168.99.99].
11-55-40-992| [ pfac] [ 22.984747] Ok, PID 655.
11-55-40-992| [ pfac] [ 22.989393] Process pid 655 terminated, status 00000000.
11-55-40-992| [ gm] [ 22.989730] 192.168.99.99 => 192.168.99.99.
11-55-40-992| [ gm] [ 22.998956] Free ram before fork terminal client /sbin/rdpclient (session 1): 923360 Kb.
11-55-40-992| [ pfac] [ 22.999104] Run /sbin/rdpclient 1.
11-55-40-992| [ gm] [ 22.999150] Run '/sbin/rdpclient 1', log '/tmp/rdpclient.out', env '', pid ''.
11-55-40-992| [ pfac] [ 22.999332] Ok, PID 656.
11-55-40-992| [ rdpclient 656] [ 23.007373] RDP Terminal Client, WTware 5.6.24/RPi, pipe 1, pid 656.
11-55-40-992| [ rdpclient 656] [ 23.010271] Use /lib/ui32.so.
11-55-40-992| [ rdpclient 656] [ 23.010501] Make RDP session with 192.168.99.99, port 3389.
11-55-40-992| [ rdpclient 656] [ 23.010591] No username.
11-55-40-992| [ rdpclient 656] [ 23.010672] No password.
11-55-40-992| [ rdpclient 656] [ 23.010753] No PIN.
11-55-40-992| [ rdpclient 656] [ 23.010833] No domain.
11-55-40-992| [ rdpclient 656] [ 23.010910] No shell.
11-55-40-992| [ rdpclient 656] [ 23.010988] No directory.
11-55-40-992| [ rdpclient 656] [ 23.011064] Window: 1024x768@24.
11-55-40-992| [ rdpclient 656] [ 23.011144] PFlags 0x0000002F.
11-55-40-992| [ rdpclient 656] [ 23.011223] Keyboard 00000409:00000000.
11-55-40-992| [ rdpclient 656] [ 23.011300] My hostname "wtwB837EB5D4582".
11-55-40-992| [ rdpclient 656] [ 23.011383] TCP: connecting to 192.168.99.99:3389.
11-55-40-993| Connection from wtc.exe at 192.168.200.83.
11-57-10-422| [ rdpclient 656] [ 156.630218] fstream.cpp ( 453): -- ERROR -- Conection with 192.168.99.99:3389 failed, errno 110.
11-57-10-532| [ rdpclient 656] [ 156.730389] rdpclient-tcp.cpp ( 260): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
11-57-10-594| [ gm] [ 156.731410] Final message: Server 192.168.99.99, port 3389: connection rejected.
11-57-10-594| Make sure that terminal service works on this server.
11-57-10-610| Try to connect using mstsc.exe.
11-57-10-610| [ rdpclient 656] [ 156.731463] Server 192.168.99.99, port 3389: connection rejected.
11-57-10-610| Make sure that terminal service works on this server.
11-57-10-625| Try to connect using mstsc.exe.
11-57-10-625| [ pfac] [ 156.731582] Process pid 656 terminated, status 00000009.