Sony Cybershot

Windows Server 2012R2 is now able to redirect USB to terminal services, not only to virtual machines
Post Reply
robertvg
Posts: 21
Joined: Mon Apr 24, 2017 2:34 pm

Sony Cybershot

Post by robertvg » Thu Jul 13, 2017 5:38 pm

Is there anything extra I need to do to access images on a digital camera ?
It is a Sony Cybershot DSC-W35, we see it in the USB device list:
USB ID: 054c:0010, bus ID: 1-1.3.3, class: 0x00, subclass: 0x00, Sony Corp. DSC-S30/S70/S75/F505V/F505/FD92/W1 Cybershot/Mavica Digital Cam

Unplugging and plugging in the log:
[ KERNEL] [2348526.150583] usb 1-1.3.3: new high-speed USB device number 10 using dwc_otg
[ KERNEL] [2348526.282819] usb 1-1.3.3: New USB device found, idVendor=054c, idProduct=0010
[ KERNEL] [2348526.282833] usb 1-1.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ KERNEL] [2348526.282840] usb 1-1.3.3: Product: Sony DSC
[ KERNEL] [2348526.282849] usb 1-1.3.3: Manufacturer: Sony

However in the terminal server session the server does not show the device.

Thanks,
Robert

robertvg
Posts: 21
Joined: Mon Apr 24, 2017 2:34 pm

Re: Sony Cybershot

Post by robertvg » Fri Jul 14, 2017 3:40 pm

The display on the camera stays on status "USB Mode: Connecting"
It doesn't switch to "USB Mode: Mass Storage. Memory Stick"

akatik
SUPPORT
SUPPORT
Posts: 142
Joined: Mon Jan 17, 2005 6:30 pm
Contact:

Re: Sony Cybershot

Post by akatik » Fri Jul 14, 2017 7:18 pm

"class: 0x00, subclass: 0x00" is not good :(
In wtware config file:
disk=usb
On the camera, look for mode setting. if there are PTP, MPT or Auto, change it to Mass Storage.
And send us full log to support@wtware.com

robertvg
Posts: 21
Joined: Mon Apr 24, 2017 2:34 pm

Re: Sony Cybershot

Post by robertvg » Mon Jul 17, 2017 11:20 am

Great atatik !
Changing the setting from auto to mass storage made it work indeed.
The USB id is now:
[3] USB ID: 054c:0010, bus ID: 1-1.3.4, class: 0x00, subclass: 0x00, Sony Corp. DSC-S30/S70/S75/F505V/F505/FD92/W1 Cybershot/Mavica Digital Cam

Post Reply