Page 1 of 1

Audio by jack and microphone by usb

Posted: Tue Sep 07, 2021 4:59 pm
by PATOP69
Hello,
I have raspberryPi4 with VTWARE update V.5.8.88 and I have connected headphone by 3.5 Jack and one microphone via USB. With this VTWARE parameters all work OK:

sound=on, amixer:cset numid=3 1
microphone=on, hw:1:0

If I simple update to VTWARE version great than V.5.8.88 my configuration audio and microphone stop to work !! I have tryed even with the last V.6.0.56 ... the only way for a runnung audio and microphone is come back to V.5.8.88.

Any idea?

Re: Audio by jack and microphone by usb

Posted: Wed Sep 08, 2021 3:22 pm
by akatik
In new versions parameter sound changed, by raspberry manufacturers. AmiŃ…er is not working anymore. Please, read new manual: http://wtware.com/docs5/sound.html

Re: Audio by jack and microphone by usb

Posted: Thu Sep 09, 2021 12:21 pm
by PATOP69
Hi... I read the manual.... with this parameters :

sound = on, hw:1:0
microphone=on, hw:1:0

after update to VTWARE V.6.0.56 the audio output on the 3,5 Jack of RaspPI4 work fine.... but the USB microphone do not work!!! I reverse back to V.5.8.88 and all device (audio+USBmicrophone) work again.... why? Thank you in advice!

Re: Audio by jack and microphone by usb

Posted: Thu Sep 09, 2021 7:02 pm
by akatik
Send me terminal log to support@wtware.com
And specify
microphone=on

Re: Audio by jack and microphone by usb

Posted: Wed Sep 15, 2021 11:37 am
by PATOP69
OK mr.akatik..... I have sent the logs. Please let me kno. Thak You.

Re: Audio by jack and microphone by usb

Posted: Sun Sep 19, 2021 9:14 pm
by aka
Please try:

Code: Select all

microphone=on, hw:2:0

Re: Audio by jack and microphone by usb

Posted: Fri Dec 10, 2021 4:09 pm
by PATOP69
Hello,
I loaded last version 6.0.62 on raspberry4 and my microphone have again problems. Infact the usb-mic connected to my raspPi4 work on my RDP session only one time (for example with the first CAAL via TEAMS) after it appear full loaded and do not work until I restart the raspPi4 hardware. The configuration that I use is the same that you have specified to me on this post. Please let me know thank you....I'am sure this problem depends on firmware 6.0.xx.. Regards

Re: Audio by jack and microphone by usb

Posted: Fri Dec 10, 2021 11:47 pm
by aka
Please try:

Code: Select all

microphone=raw
Or with hardware device, if needed:

Code: Select all

microphone=raw, hw:2:0

Re: Audio by jack and microphone by usb

Posted: Mon Jan 31, 2022 4:03 pm
by PATOP69
Morning Katerina,
we have set the audio parameters as you stated and now we are update to last firmware 6.0.72 because after some days the raspberry loose the audio on 3,5 Jack ....this problem persist also with last today firmware 6.0.72....the audio work for some days but after 3-4 days that raspberry is operative with RDP the audio signal disappered and we must restart the raspberry to return with the audio again operative.
Please let me know
Thank you
Regards
Alberto