Power button after remote shutdown

All about WTware on Raspberry. WTware works with Raspberry Pi 4, Raspberry Pi 3B+, Pi 3 and Pi 2 devices
http://www.winterminal.com
Post Reply
Webjom
Posts: 5
Joined: Tue Sep 10, 2019 10:19 am

Power button after remote shutdown

Post by Webjom » Thu Sep 12, 2019 6:40 pm

After remote shutdown, raspberry pi 4 remains powered, can it be turned on via the button ..... where do I write "dtoverlay = gpio-shutdown" to start pin 5 and 6 to work?

akatik
SUPPORT
SUPPORT
Posts: 379
Joined: Mon Jan 17, 2005 6:30 pm
Contact:

Re: Power button after remote shutdown

Post by akatik » Sat Sep 14, 2019 11:32 am

We have never tried it. And there is no "gpio-shutdown" overlay in wtware distributive.

Test it with Raspbian first. After you find what and where to write, tell me and we'll try to add overlay file to wtware.

Webjom
Posts: 5
Joined: Tue Sep 10, 2019 10:19 am

Re: Power button after remote shutdown

Post by Webjom » Sun Sep 15, 2019 10:18 am

here is the exact tutorial that is written in python. Too bad wtware python does not take. But if you can rewrite the example link with the procedure. https://howchoo.com/g/mwnlytk3zmm/how-t ... spberry-pi

Post Reply