digital audio capture, aka remote recording
Posted: Tue Jan 09, 2018 5:41 pm
Hi,
I have successful raspberry Pi 3 network boot with linux isc-dhcpd + linux tftp server, using RDP on VM server (vmware).
I use wtware configuration software in windows 10, and sync the wtc config files to tftpboot dir.
I ran the update firmware in raspberry pi, using raspian
But I can't see microphone in wtware rdp - device record.
I already config registry in windows 7, as ref: https://docs.microsoft.com/en-us/vsts/f ... io-capture
The logs say that the audio device is detect OK.
The sound in phone and volume control works well.
I try other sound= and microphone= combinations, without success.
One question: is this correct?
[ gm] [ 11.011491] Add keyboard event1: C-Media Electronics Inc. USB PnP Sound Device.
Keyboard event ? Are there volume control reference?
Well.... help me, please !
My full logs:
I have successful raspberry Pi 3 network boot with linux isc-dhcpd + linux tftp server, using RDP on VM server (vmware).
I use wtware configuration software in windows 10, and sync the wtc config files to tftpboot dir.
I ran the update firmware in raspberry pi, using raspian
But I can't see microphone in wtware rdp - device record.
I already config registry in windows 7, as ref: https://docs.microsoft.com/en-us/vsts/f ... io-capture
The logs say that the audio device is detect OK.
The sound in phone and volume control works well.
I try other sound= and microphone= combinations, without success.
One question: is this correct?
[ gm] [ 11.011491] Add keyboard event1: C-Media Electronics Inc. USB PnP Sound Device.
Keyboard event ? Are there volume control reference?
Well.... help me, please !
My full logs:
Code: Select all
WTware 5.6.22/RPi supervisor.
[ KERNEL] [ 0.000000] Booting Linux on physical CPU 0x0
[ KERNEL] [ 0.000000] Linux version 4.9.65 (aka@c12) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #4 SMP Fri Dec 1 22:25:55 +04 2017
[ KERNEL] [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ KERNEL] [ 0.000000] CPU: div instructions available: patching division code
[ KERNEL] [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ KERNEL] [ 0.000000] OF: fdt:Machine model: Raspberry Pi 3 Model B Rev 1.2
[ KERNEL] [ 0.000000] cma: Reserved 8 MiB at 0x3ac00000
[ KERNEL] [ 0.000000] Memory policy: Data cache writealloc
[ KERNEL] [ 0.000000] On node 0 totalpages: 242688
[ KERNEL] [ 0.000000] free_area_init_node: node 0, pgdat 80c22b40, node_mem_map ba3a1000
[ KERNEL] [ 0.000000] Normal zone: 2133 pages used for memmap
[ KERNEL] [ 0.000000] Normal zone: 0 pages reserved
[ KERNEL] [ 0.000000] Normal zone: 242688 pages, LIFO batch:31
[ KERNEL] [ 0.000000] percpu: Embedded 11 pages/cpu @ba367000 s15948 r8192 d20916 u45056
[ KERNEL] [ 0.000000] pcpu-alloc: s15948 r8192 d20916 u45056 alloc=11*4096
[ KERNEL] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ KERNEL] [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 240555
[ KERNEL] [ 0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbdepth=32 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 hide_setup quiet
[ KERNEL] [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ KERNEL] [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ KERNEL] [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ KERNEL] [ 0.000000] Memory: 941160K/970752K available (5120K kernel code, 143K rwdata, 920K rodata, 5120K init, 365K bss, 21400K reserved, 8192K cma-reserved)
[ KERNEL] [ 0.000000] Virtual kernel memory layout:
[ KERNEL] [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ KERNEL] [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ KERNEL] [ 0.000000] vmalloc : 0xbb800000 - 0xff800000 (1088 MB)
[ KERNEL] [ 0.000000] lowmem : 0x80000000 - 0xbb400000 ( 948 MB)
[ KERNEL] [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
[ KERNEL] [ 0.000000] .text : 0x80008000 - 0x80600000 (6112 kB)
[ KERNEL] [ 0.000000] .init : 0x80700000 - 0x80c00000 (5120 kB)
[ KERNEL] [ 0.000000] .data : 0x80c00000 - 0x80c23df8 ( 144 kB)
[ KERNEL] [ 0.000000] .bss : 0x80c25000 - 0x80c805a0 ( 366 kB)
[ KERNEL] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ KERNEL] [ 0.000000] Hierarchical RCU implementation.
[ KERNEL] [ 0.000000] Build-time adjustment of leaf fanout to 32.
[ KERNEL] [ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ KERNEL] [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys).
[ KERNEL] [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ KERNEL] [ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ KERNEL] [ 0.000017] Switching to timer-based delay loop, resolution 52ns
[ KERNEL] [ 0.000208] Console: colour dummy device 80x30
[ KERNEL] [ 0.000222] console [tty0] enabled
[ KERNEL] [ 0.000238] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ KERNEL] [ 0.000252] pid_max: default: 32768 minimum: 301
[ KERNEL] [ 0.000384] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ KERNEL] [ 0.000391] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ KERNEL] [ 0.001234] Disabling memory control group subsystem
[ KERNEL] [ 0.001288] CPU: Testing write buffer coherency: ok
[ KERNEL] [ 0.001624] CPU0: update cpu_capacity 1024
[ KERNEL] [ 0.001632] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ KERNEL] [ 0.001656] Setting up static identity map for 0x100000 - 0x100034
[ KERNEL] [ 0.003169] CPU1: update cpu_capacity 1024
[ KERNEL] [ 0.003175] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ KERNEL] [ 0.003726] CPU2: update cpu_capacity 1024
[ KERNEL] [ 0.003733] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ KERNEL] [ 0.004278] CPU3: update cpu_capacity 1024
[ KERNEL] [ 0.004284] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ KERNEL] [ 0.004362] Brought up 4 CPUs
[ KERNEL] [ 0.004371] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ KERNEL] [ 0.004375] CPU: All CPU(s) started in HYP mode.
[ KERNEL] [ 0.004378] CPU: Virtualization extensions available.
[ KERNEL] [ 0.004915] devtmpfs: initialized
[ KERNEL] [ 0.014605] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ KERNEL] [ 0.014986] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ KERNEL] [ 0.015001] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ KERNEL] [ 0.015483] pinctrl core: initialized pinctrl subsystem
[ KERNEL] [ 0.016015] NET: Registered protocol family 16
[ KERNEL] [ 0.017856] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ KERNEL] [ 0.028015] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ KERNEL] [ 0.111144] bcm2835-dma 3f007000.dma: DMA legacy API manager at bb80f000, dmachans=0x1
[ KERNEL] [ 0.113478] usbcore: registered new interface driver usbfs
[ KERNEL] [ 0.113599] usbcore: registered new interface driver hub
[ KERNEL] [ 0.113686] usbcore: registered new device driver usb
[ KERNEL] [ 0.120149] raspberrypi-firmware soc:firmware: Attached to firmware from 2017-11-17 15:19
[ KERNEL] [ 0.122437] clocksource: Switched to clocksource arch_sys_counter
[ KERNEL] [ 0.137418] NET: Registered protocol family 2
[ KERNEL] [ 0.137991] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ KERNEL] [ 0.138099] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ KERNEL] [ 0.138283] TCP: Hash tables configured (established 8192 bind 8192)
[ KERNEL] [ 0.138367] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ KERNEL] [ 0.138408] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ KERNEL] [ 0.138582] NET: Registered protocol family 1
[ KERNEL] [ 2.246586] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ KERNEL] [ 2.282384] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ KERNEL] [ 2.282398] io scheduler noop registered
[ KERNEL] [ 2.282403] io scheduler deadline registered (default)
[ KERNEL] [ 2.293307] BCM2708FB: allocated DMA memory fad10000
[ KERNEL] [ 2.293349] BCM2708FB: allocated DMA channel 0 @ bb80f000
[ KERNEL] [ 2.352041] Console: switching to colour frame buffer device 240x67
[ KERNEL] [ 2.389698] bcm2835-rng 3f104000.rng: hwrng registered
[ KERNEL] [ 2.389900] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ KERNEL] [ 2.390780] vc-sm: Videocore shared memory driver
[ KERNEL] [ 2.396632] zram: Added device: zram0
[ KERNEL] [ 2.396671] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ KERNEL] [ 2.624417] Core Release: 2.80a
[ KERNEL] [ 2.624427] Setting default values for core params
[ KERNEL] [ 2.624455] Finished setting default values for core params
[ KERNEL] [ 2.824822] Using Buffer DMA mode
[ KERNEL] [ 2.824828] Periodic Transfer Interrupt Enhancement - disabled
[ KERNEL] [ 2.824831] Multiprocessor Interrupt Enhancement - disabled
[ KERNEL] [ 2.824839] OTG VER PARAM: 0, OTG VER FLAG: 0
[ KERNEL] [ 2.824866] Dedicated Tx FIFOs mode
[ KERNEL] [ 2.825333] WARN::dwc_otg_hcd_init:1032: FIQ DMA bounce buffers: virt = 0xbad04000 dma = 0xfad04000 len=9024
[ KERNEL] [ 2.825361] FIQ FSM acceleration enabled for :
[ KERNEL] [ 2.825361] Non-periodic Split Transactions
[ KERNEL] [ 2.825361] Periodic Split Transactions
[ KERNEL] [ 2.825361] High-Speed Isochronous Endpoints
[ KERNEL] [ 2.825361] Interrupt/Control Split Transaction hack enabled
[ KERNEL] [ 2.825367] dwc_otg: Microframe scheduler enabled
[ KERNEL] [ 2.825411] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x80397d28
[ KERNEL] [ 2.825420] WARN::hcd_init_fiq:460: FIQ ASM at 0x8039808c length 36
[ KERNEL] [ 2.825429] WARN::hcd_init_fiq:486: MPHI regs_base at 0xbb925000
[ KERNEL] [ 2.825485] dwc_otg 3f980000.usb: DWC OTG Controller
[ KERNEL] [ 2.825519] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ KERNEL] [ 2.825548] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[ KERNEL] [ 2.825594] Init: Port Power? op_state=1
[ KERNEL] [ 2.825598] Init: Power Port (0)
[ KERNEL] [ 2.825784] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ KERNEL] [ 2.825794] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ KERNEL] [ 2.825802] usb usb1: Product: DWC OTG Controller
[ KERNEL] [ 2.825809] usb usb1: Manufacturer: Linux 4.9.65 dwc_otg_hcd
[ KERNEL] [ 2.825816] usb usb1: SerialNumber: 3f980000.usb
[ KERNEL] [ 2.826568] hub 1-0:1.0: USB hub found
[ KERNEL] [ 2.826606] hub 1-0:1.0: 1 port detected
[ KERNEL] [ 2.827316] dwc_otg: FIQ enabled
[ KERNEL] [ 2.827320] dwc_otg: NAK holdoff enabled
[ KERNEL] [ 2.827325] dwc_otg: FIQ split-transaction FSM enabled
[ KERNEL] [ 2.827340] Module dwc_common_port init
[ KERNEL] [ 2.827722] usbcore: registered new interface driver usbtouchscreen
[ KERNEL] [ 2.829081] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[ KERNEL] [ 2.829587] bcm2835-cpufreq: min=600000 max=1200000
[ KERNEL] [ 2.830668] sdhost-bcm2835 3f202000.sdhost: could not get clk, deferring probe
[ KERNEL] [ 2.833133] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[ KERNEL] [ 2.835648] ledtrig-cpu: registered to indicate activity on CPUs
[ KERNEL] [ 2.835826] hidraw: raw HID events driver (C) Jiri Kosina
[ KERNEL] [ 2.836593] usbcore: registered new interface driver usbhid
[ KERNEL] [ 2.836601] usbhid: USB HID core driver
[ KERNEL] [ 2.837775] vchiq: vchiq_init_state: slot_zero = 0xbad80000, is_master = 0
[ KERNEL] [ 2.844890] [vc_sm_connected_init]: start
[ KERNEL] [ 2.852742] [vc_sm_connected_init]: end - returning 0
[ KERNEL] [ 2.852996] NET: Registered protocol family 17
[ KERNEL] [ 2.853159] Registering SWP/SWPB emulation handler
[ KERNEL] [ 2.853744] registered taskstats version 1
[ KERNEL] [ 2.857874] sdhost: log_buf @ bad07000 (fad07000)
[ KERNEL] [ 2.932453] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ KERNEL] [ 2.934573] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[ KERNEL] [ 2.934577] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[ KERNEL] [ 2.992496] of_cfs_init
[ KERNEL] [ 2.992554] of_cfs_init: OK
[ KERNEL] [ 3.004816] Freeing unused kernel memory: 5120K
[ KERNEL] [ 3.041855] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ KERNEL] [ 3.042552] Indeed it is in host mode hprt0 = 00021501
[ KERNEL] [ 3.103532] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ KERNEL] [ 3.105037] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ KERNEL] [ 3.107724] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ KERNEL] [ 3.112617] mmc0: host does not support reading read-only switch, assuming write-enable
[ KERNEL] [ 3.116064] mmc0: new high speed SDHC card at address aaaa
[ KERNEL] [ 3.116504] mmcblk0: mmc0:aaaa SB32G 29.7 GiB
[ KERNEL] [ 3.119033] mmcblk0: p1 p2
[ hotplug] [ 3.118577] Block device 179:2. No action.
[ hotplug] [ 3.118745] Block device 179:0. No action.
[ KERNEL] [ 3.120961] random: fast init done
[ hotplug] [ 3.118908] Block device 179:1. No action.
[ KERNEL] [ 3.197306] mmc1: new high speed SDIO card at address 0001
[ KERNEL] [ 3.262508] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ KERNEL] [ 3.262607] Indeed it is in host mode hprt0 = 00001101
[ hotplug] [ 3.299476] Block device 254:0. No action.
[ pfac] [ 3.337701] Run /sbin/initrd.
[ pfac] [ 3.337757] Ok, PID 609.
[ initrd] [ 3.339436] WTware shell 5.6.22/RPi
[ KERNEL] [ 3.492592] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ KERNEL] [ 3.492604] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ KERNEL] [ 3.493069] hub 1-1:1.0: USB hub found
[ KERNEL] [ 3.493142] hub 1-1:1.0: 5 ports detected
[ KERNEL] [ 3.812470] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ KERNEL] [ 3.942711] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ KERNEL] [ 3.942722] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ KERNEL] [ 4.042476] usb 1-1.2: new low-speed USB device number 4 using dwc_otg
[ KERNEL] [ 4.176516] usb 1-1.2: New USB device found, idVendor=2188, idProduct=0ae1
[ KERNEL] [ 4.176528] usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ KERNEL] [ 4.176535] usb 1-1.2: Product: USB OPTICAL MOUSE
[ KERNEL] [ 4.182056] input: USB OPTICAL MOUSE as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:2188:0AE1.0001/input/input0
[ KERNEL] [ 4.182684] hid-generic 0003:2188:0AE1.0001: input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE ] on usb-3f980000.usb-1.2/input0
[ KERNEL] [ 4.282469] usb 1-1.4: new full-speed USB device number 5 using dwc_otg
[ KERNEL] [ 4.420259] usb 1-1.4: New USB device found, idVendor=8086, idProduct=0808
[ KERNEL] [ 4.420270] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ KERNEL] [ 4.420278] usb 1-1.4: Product: USB PnP Sound Device
[ KERNEL] [ 4.420285] usb 1-1.4: Manufacturer: C-Media Electronics Inc.
[ KERNEL] [ 4.425818] input: C-Media Electronics Inc. USB PnP Sound Device as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.3/0003:8086:0808.0002/input/input1
[ KERNEL] [ 4.493006] hid-generic 0003:8086:0808.0002: input,hidraw1: USB HID v1.00 Device [C-Media Electronics Inc. USB PnP Sound Device] on usb-3f980000.usb-1.4/input3
[ KERNEL] [ 4.792467] usb 1-1.5: new low-speed USB device number 6 using dwc_otg
[ KERNEL] [ 4.938885] usb 1-1.5: New USB device found, idVendor=1a2c, idProduct=2d23
[ KERNEL] [ 4.938896] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ KERNEL] [ 4.938903] usb 1-1.5: Product: USB Keyboard
[ KERNEL] [ 4.938910] usb 1-1.5: Manufacturer: USB
[ KERNEL] [ 4.949041] input: USB USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:1A2C:2D23.0003/input/input2
[ KERNEL] [ 5.013736] hid-generic 0003:1A2C:2D23.0003: input,hidraw2: USB HID v1.10 Keyboard [USB USB Keyboard] on usb-3f980000.usb-1.5/input0
[ KERNEL] [ 5.023636] input: USB USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.1/0003:1A2C:2D23.0004/input/input3
[ KERNEL] [ 5.093073] hid-generic 0003:1A2C:2D23.0004: input,hidraw3: USB HID v1.10 Device [USB USB Keyboard] on usb-3f980000.usb-1.5/input1
[ initrd] [ 5.370524] Load ethernet drivers.
[ initrd] [ 5.375475] modprobe smsc95xx.
[ KERNEL] [ 5.385566] smsc95xx v1.0.5
[ KERNEL] [ 5.476902] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:2a:5f:a3
[ KERNEL] [ 5.477306] usbcore: registered new interface driver smsc95xx
[ KERNEL] [ 5.564335] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ KERNEL] [ 7.007692] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1
[ initrd] [ 8.260183] dhcp: 328 bytes from 10.11.0.30.
[ initrd] [ 8.260303] 00000000:0000013400000000001100000A0B001E0A0B00DD004300440134000002010600 ...4...............C.D.4......
[ initrd] [ 8.260377] 00000020:67458B6B00000000000000000A0B00DD0A0B001E00000000B827EB2A5FA30000 gE.k....................'.*_...
[ initrd] [ 8.260446] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 8.260514] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 8.260582] 00000080:000000000000000073746172742E656C66000000000000000000000000000000 ........start.elf...............
[ initrd] [ 8.260650] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 8.260717] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 8.260785] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ KERNEL] [ 9.680903] random: crng init done
[ initrd] [ 10.520171] dhcp: 328 bytes from 10.11.0.30.
[ initrd] [ 10.520298] 00000000:0000013400000000001100000A0B001E0A0B00DD004300440134000002010600 ...4...............C.D.4......
[ initrd] [ 10.520370] 00000020:67458B6B00000000000000000A0B00DD0A0B001E00000000B827EB2A5FA30000 gE.k....................'.*_...
[ initrd] [ 10.520438] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 10.520506] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 10.520573] 00000080:000000000000000073746172742E656C66000000000000000000000000000000 ........start.elf...............
[ initrd] [ 10.520641] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 10.520707] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 10.520774] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 10.560093] dhcp: server address 10.11.0.30.
[ initrd] [ 10.560167] dhcp: 10.11.0.221/255.255.255.0.
[ initrd] [ 10.560238] dhcp: default gateway 10.11.0.30.
[ initrd] [ 10.560304] dhcp: DNS 8.8.8.8.
[ initrd] [ 10.560369] dhcp: domain teste.com.br.
[ initrd] [ 10.560434] dhcp: TFTP from 066 10.11.0.30.
[ initrd] [ 10.560499] dhcp: TFTP 10.11.0.30.
[ initrd] [ 10.560563] Use default TFTP prefix for Raspberry network boot.
[ initrd] [ 10.560629] TFTP binary "5.6.22/", configs prefix "", using "/" slash.
WTC listener is active.
WTC broadcast listener is active.
Send broadcast WTCU discover.
[ initrd] [ 10.572868] Success: media /dev/mmcblk0p1 mounted to /bootmedia.
[ initrd] [ 10.574927] WTpassword present: 4fdd7b466ab915c50d6ab85f.
[ initrd] [ 10.612815] Run '/sbin/httpd', log '/tmp/httpd.out', env '', pid ''.
[ pfac] [ 10.613275] Run /sbin/httpd.
[ pfac] [ 10.613378] Ok, PID 657.
[ httpd] [ 10.618209] HTTP Server, WTware 5.6.22/RPi
[ initrd] [ 10.727871] USB: 1a2c:2d23 China Resource Semico Co., Ltd.
[ initrd] [ 10.728015] USB: 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter.
[ initrd] [ 10.728093] USB: 0424:9514 Standard Microsystems Corp. SMC9514 Hub.
[ initrd] [ 10.728165] USB: 8086:0808 Intel Corp..
[ initrd] [ 10.728234] USB: 2188:0ae1 .
[ initrd] [ 10.728302] [TFTP] Download config file Everyone/source.wtc from 10.11.0.30.
[ initrd] [ 10.731582] [TFTP] It is not WTware5 TFTP server.
[ initrd] [ 10.735597] [TFTP] Download config file Everyone/list.wtc from 10.11.0.30.
[ initrd] [ 10.738504] [TFTP] Download config file Terminals/B8.27.EB.2A.5F.A3/config.wtc from 10.11.0.30.
/--- FILE "/tmp/config.wtc" -----------------------
| user=testuser
| server=192.168.24.96
| sound=on, hw:1:0
| skin=Papel
| connection
\----------------------------------------------------
[ initrd] [ 10.741106] [TFTP] Download config file Everyone/all.wtc from 10.11.0.30.
/--- FILE "/tmp/all.wtc" -----------------------
| [BOM]
| domain=domaintest.local
| keyboard=pt-br
| language=pt-br,default
| skin=sample
| sound=on, hw:1:0
\----------------------------------------------------
/--- FILE "/etc/config.compiled" -----------------------
| [BOM]
| domain=domaintest.local
| keyboard=pt-br
| language=pt-br,default
| skin=Papel
| sound=on, hw:1:0
| user=testuser
| server=192.168.24.96
| connection
\----------------------------------------------------
[ initrd] [ 10.744558] Hostname: "wtwB827EBXXXXXX".
Everyone can control terminal by RSH.
RSH: listener is active.
Send broadcast WTCU discover.
[ gm] [ 11.009890] WTware session manager 5.6.22/RPi.
[ gm] [ 11.011279] Add keyboard event3: USB USB Keyboard.
[ gm] [ 11.011371] Add keyboard event2: USB USB Keyboard.
[ httpd] [ 11.011448] Reread settings.
[ gm] [ 11.011491] Add keyboard event1: C-Media Electronics Inc. USB PnP Sound Device.
[ httpd] [ 11.011627] Everyone can control terminal by HTTP.
[ gm] [ 11.080116] EV_REL flag found. Add mouse event0: USB OPTICAL MOUSE .
[ gm] [ 11.080344] Display mode: 1920x1080, 32 bit, landscape, 0 Hz, modeline "", DDC enabled, connector 0.
[ gm] [ 11.115881] Framebuffer device found.
[ gm] [ 11.115959] LINELENBYTES 7680
[ gm] [ 11.116032] VLEN 8294400
[ gm] [ 11.152511] Use /lib/ui32.so.
[ gm] [ 11.153149] [TFTP] Download config file Graphic/Papel/menu.png from 10.11.0.30.
[ gm] [ 11.166406] [TFTP] Download config file Graphic/Papel/popup.png from 10.11.0.30.
[ gm] [ 11.172068] [TFTP] Download config file Graphic/Papel/saver.png from 10.11.0.30.
[ gm] [ 11.176756] [TFTP] Download config file Graphic/Papel/wait.png from 10.11.0.30.
[ gm] [ 11.303200] [TFTP] Download and unpack file 5.6.22/pi2/localboot/packages/pi2-alsa from 10.11.0.30.
[ gm] [ 11.929192] modprobe snd-bcm2835.
[ gm] [ 11.948068] modprobe snd-usb-audio.
/--- FILE "/proc/asound/devices" -----------------------
| 0: [ 0] : control
| 16: [ 0- 0]: digital audio playback
| 17: [ 0- 1]: digital audio playback
| 32: [ 1] : control
| 33: : timer
| 48: [ 1- 0]: digital audio playback
| 56: [ 1- 0]: digital audio capture
\----------------------------------------------------
[ KERNEL] [ 11.989617] usbcore: registered new interface driver snd-usb-audio
[ gm] [ 11.989661] /dev/snd/pcmC1D0c character device.
[ gm] [ 11.989808] /dev/snd/pcmC1D0p character device.
[ gm] [ 11.989925] /dev/snd/controlC1 character device.
[ gm] [ 11.990098] /dev/snd/pcmC0D1p character device.
[ pfac] [ 11.990182] Run /sbin/rdpsnd sndvol 100 100 50.
[ gm] [ 11.990228] /dev/snd/pcmC0D0p character device.
[ gm] [ 11.990301] /dev/snd/controlC0 character device.
[ pfac] [ 11.990376] Ok, PID 688.
[ gm] [ 11.990423] /dev/snd/timer character device.
[ pfac] [ 11.990658] Run /sbin/rdpsnd 1 0 100 1 0.
[ gm] [ 11.990762] Preconfigure ALSA.
[ pfac] [ 11.990893] Ok, PID 689.
[ gm] [ 11.990944] Run '/sbin/rdpsnd sndvol 100 100 50', log '', env '', pid ''.
[ gm] [ 11.991047] Run sound daemon.
[ gm] [ 11.991154] Run '/sbin/rdpsnd 1 0 100 1 0', log '', env '', pid ''.
[ rdpsnd] [ 11.997332] RDP Sound Redirector, WTware 5.6.22/RPi.
[ rdpsnd] [ 12.003988] Card 'Device'/'C-Media Electronics Inc. USB PnP Sound Device at usb-3f980000.usb-1.4, full spe'.
[ rdpsnd] [ 12.004193] Mixer name: 'USB Mixer'.
[ sndvol] [ 12.004279] Card 'ALSA'/'bcm2835 ALSA'.
[ sndvol] [ 12.004360] Mixer name: 'Broadcom Mixer'.
[ sndvol] [ 12.004473] Components: ''.
[ sndvol] [ 12.004553] Controls: 6.
[ sndvol] [ 12.004650] ALSA: control 'PCM Playback Volume'.
[ sndvol] [ 12.004748] ALSA: control 'PCM Playback Switch'.
[ sndvol] [ 12.004829] ALSA: control 'PCM Playback Route'.
[ sndvol] [ 12.004907] ALSA: control 'IEC958 Playback Default'.
[ sndvol] [ 12.005009] ALSA: control 'IEC958 Playback Con Mask'.
[ sndvol] [ 12.005110] ALSA: control 'IEC958 Playback PCM Stream'.
[ sndvol] [ 12.005226] Inactive control IEC958 Playback PCM Stream'.
[ sndvol] [ 12.005307] Card 'Device'/'C-Media Electronics Inc. USB PnP Sound Device at usb-3f980000.usb-1.4, full spe'.
[ sndvol] [ 12.005386] Mixer name: 'USB Mixer'.
[ sndvol] [ 12.005484] Components: 'USB8086:0808'.
[ sndvol] [ 12.005582] Controls: 7.
[ sndvol] [ 12.005668] ALSA: control 'Playback Channel Map'.
[ sndvol] [ 12.005770] ALSA: control 'Capture Channel Map'.
[ sndvol] [ 12.005867] ALSA: control 'PCM Playback Switch'.
[ sndvol] [ 12.005964] ALSA: control 'PCM Playback Volume'.
[ rdpsnd] [ 12.006135] Components: 'USB8086:0808'.
[ rdpsnd] [ 12.006300] Controls: 7.
[ rdpsnd] [ 12.006532] ALSA: control 'Playback Channel Map'.
[ sndvol] [ 12.006594] ALSA: control 'Mic Capture Switch'.
[ sndvol] [ 12.007029] ALSA: control 'Mic Capture Volume'.
[ rdpsnd] [ 12.007221] ALSA: control 'Capture Channel Map'.
[ sndvol] [ 12.007403] ALSA: control 'Auto Gain Control'.
[ rdpsnd] [ 12.007535] ALSA: control 'PCM Playback Switch'.
[ rdpsnd] [ 12.007704] ALSA: control 'PCM Playback Volume'.
[ rdpsnd] [ 12.008781] ALSA: control 'Mic Capture Switch'.
[ rdpsnd] [ 12.008925] ALSA: control 'Mic Capture Volume'.
[ pfac] [ 12.009064] Process pid 688 terminated, status 00000000.
[ rdpsnd] [ 12.009111] ALSA: control 'Auto Gain Control'.
[ gm] [ 12.056243] Run '/sbin/resolver 0xa37ca0 dns [192.168.24.96]', log '', env '', pid ''.
[ pfac] [ 12.056408] Run /sbin/resolver 0xa37ca0 dns [192.168.24.96].
[ gm] [ 12.056520] Nobody can control terminal by VNC.
[ pfac] [ 12.056694] Ok, PID 690.
[ pfac] [ 12.062680] Process pid 690 terminated, status 00000000.
[ gm] [ 12.069260] 192.168.24.96 => 192.168.24.96.
[ gm] [ 12.081255] Free ram before fork terminal client /sbin/rdpclient (session 1): 920648 Kb.
[ pfac] [ 12.081420] Run /sbin/rdpclient 1.
[ gm] [ 12.081466] Run '/sbin/rdpclient 1', log '/tmp/rdpclient.out', env '', pid ''.
[ pfac] [ 12.081629] Ok, PID 691.
[ rdpclient 691] [ 12.089422] RDP Terminal Client, WTware 5.6.22/RPi, pipe 1, pid 691.
[ rdpclient 691] [ 12.091953] Use /lib/ui32.so.
[ rdpclient 691] [ 12.092228] Redirect sound.
[ rdpclient 691] [ 12.093720] Make RDP session with 192.168.24.96, port 3389.
[ rdpclient 691] [ 12.093936] Username: "testuser".
[ rdpclient 691] [ 12.094024] No password.
[ rdpclient 691] [ 12.094109] No PIN.
[ rdpclient 691] [ 12.094190] Domain: "domaintest.local".
[ rdpclient 691] [ 12.094272] No shell.
[ rdpclient 691] [ 12.094353] No directory.
[ rdpclient 691] [ 12.094518] Window: 1920x1080@24.
[ rdpclient 691] [ 12.094640] PFlags 0x0000002F.
[ rdpclient 691] [ 12.094753] Keyboard 00000416:00000000.
[ rdpclient 691] [ 12.094839] My hostname "wtwB827EBXXXXXX".
[ rdpclient 691] [ 12.094919] TCP: connecting to 192.168.24.96:3389.
[ rdpclient 691] [ 12.139400] TCP: connection with 192.168.24.96:3389 established.
[ rdpclient 691] [ 12.139586] Turn keepalive on.
[ rdpclient 691] [ 12.139670] Free ram after buffers allocation: 919840 KB.
[ rdpclient 691] [ 12.246202] Process RDP server certificate.
[ rdpclient 691] [ 12.246302] RDP4 encryption.
[ rdpclient 691] [ 12.613582] Enable font smoothing.
[ rdpclient 691] [ 13.493917] 32-bit color.
[ rdpclient 691] [ 29.066959] errorInfo 0x00000000.
[ rdpclient 691] [ 30.028849] SessionId 0x00000038: DOMAINTEST\testuser.