5.4.34 on RPi3 Broken

All about WTware on Raspberry. WTware works with Raspberry Pi 4, Raspberry Pi 3B+, Pi 3 and Pi 2 devices
http://www.winterminal.com
Post Reply
J1mbo
Posts: 57
Joined: Mon Mar 14, 2016 6:24 pm

5.4.34 on RPi3 Broken

Post by J1mbo » Tue Jul 12, 2016 6:01 pm

Hi Support

5.4.34 appears to hang at Starting Kernel on RPi3 (5.4.32 is OK).

Here is the relevant log extracts:

Code: Select all

15-57-19-314| Send broadcast WTCU discover.
15-57-19-314| [         httpd] [   10.665094] Reread settings.
15-57-19-314| [         httpd] [   10.665157] Everyone can control terminal by HTTP.
15-57-19-314| [            gm] [   10.665181] WTware session manager v.5.4.34/RPi.
15-57-19-314| [            gm] [   10.665220]          fstream.cpp (  277): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
15-57-19-314| [            gm] [   10.665259]             misc.cpp (   22): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
15-57-19-314| [            gm] [   10.665298] Add keyboard event2: Dell Dell Wired Multimedia Keyboard.
15-57-19-314| [            gm] [   10.665336] Add keyboard event1: Dell Dell Wired Multimedia Keyboard.
15-57-19-314| [            gm] [   10.720067] EV_REL flag found. Add mouse event0: PixArt Dell MS116 USB Optical Mouse.
15-57-19-314| [            gm] [   10.720233] graphdriver_f_fb.cpp (  602): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
15-57-19-314| [            gm] [   10.720300] Display mode: 1024x768, 16 bit, 0 Hz, modeline "", DDC enabled, connector 0.
15-57-19-314| [            gm] [   13.722461] graphdriver_f_fb.cpp (  538): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
15-57-19-314| [            gm] [   13.722543]    graphdriver_f.cpp (  323): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
15-57-19-314| [            gm] [   13.722609]     graphconsole.cpp (  630): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
15-57-19-314| [            gm] [   13.722818] Caught signal SIGSEGV.
15-57-19-314| [          pfac] [   13.900483] Process pid 532 terminated, status 00000000.
15-57-19-314| [          pfac] [   13.900604]                uds.h (   63): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
15-57-19-314| [          pfac] [   13.900670]            hotplug.h (   85): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
15-57-19-316| Connection from wtc.exe at 10.3.0.227.
15-57-20-592| [        KERNEL] [   73.995093] usb 1-1.4: USB disconnect, device number 4
15-57-22-118| [        KERNEL] [   75.512135] usb 1-1.4: new low-speed USB device number 7 using dwc_otg
15-57-22-318| [        KERNEL] [   75.617537] usb 1-1.4: New USB device found, idVendor=413c, idProduct=301a
15-57-22-320| [        KERNEL] [   75.617545] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
15-57-22-321| [        KERNEL] [   75.617551] usb 1-1.4: Product: Dell MS116 USB Optical Mouse
15-57-22-323| [        KERNEL] [   75.617557] usb 1-1.4: Manufacturer: PixArt
15-57-22-323| [        KERNEL] [   75.620734] input: PixArt Dell MS116 USB Optical Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:413C:301A.0004/input/input3
15-57-22-325| [        KERNEL] [   75.620979] hid-generic 0003:413C:301A.0004: input,hidraw0: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-3f980000.usb-1.4/input0
15-57-22-326| [       hotplug] [   75.621468]                uds.h (   63): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
15-57-22-328| [       hotplug] [   75.621547]            hotplug.h (   85): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.

aka
SUPPORT
SUPPORT
Posts: 706
Joined: Fri Dec 03, 2004 2:05 pm
Contact:

Re: 5.4.34 on RPi3 Broken

Post by aka » Tue Jul 12, 2016 10:05 pm

Something is broken. Please, give me a whole log. Do you boot locally or over network? Did you update all files on sd, not mixing old and new versions?

J1mbo
Posts: 57
Joined: Mon Mar 14, 2016 6:24 pm

Re: 5.4.34 on RPi3 Broken

Post by J1mbo » Wed Jul 13, 2016 9:37 pm

Thanks, here it is inline. Attachments don't seem to be possible (always "invalid extension: (whatever)".

The machine is configured for network boot.

Code: Select all

15-55-54-764| [wtc.exe] Terminal will restart now.
15-56-01-627| [TFTP] Got RRQ, 48 bytes.
15-56-01-630| [TFTP] 00000000: 35 2e 34 2e 33 34 2f 6b 65 72 6e 65 6c 37 2e 69
15-56-01-632| [TFTP] 00000010: 6d 67 00 6f 63 74 65 74 00 74 69 6d 65 6f 75 74
15-56-01-635| [TFTP] 00000020: 00 35 00 62 6c 6b 73 69 7a 65 00 31 34 36 38 00
15-56-01-637| [TFTP] Request block size 1468, forced to 1360.
15-56-01-639| [TFTP] Requests file "5.4.34\kernel7.img". Tsize is not requested, blksize 1360 bytes.
15-56-01-642| [TFTP] Sending OASK (blksize 1360).
15-56-05-257| [TFTP] Transfer of file "5.4.34\kernel7.img" completed.
15-56-05-260| [TFTP] Connection closed.
15-56-17-047| [TFTP] Got RRQ, 219 bytes.
15-56-17-050| [TFTP] 00000000: 57 54 77 61 72 65 20 76 2e 35 2e 34 2e 33 34 20
15-56-17-052| [TFTP] 00000010: 61 74 20 42 38 3a 32 37 3a 45 42 3a 34 41 3a 37
15-56-17-054| [TFTP] 00000020: 39 3a 46 31 2c 20 64 68 63 70 3d 31 30 2e 33 2e
15-56-17-055| [TFTP] 00000030: 30 2e 32 32 32 2c 20 70 6c 61 74 66 6f 72 6d 3d
15-56-17-056| [TFTP] 00000040: 50 69 32 42 2c 20 69 70 3d 31 30 2e 33 2e 36 2e
15-56-17-057| [TFTP] 00000050: 36 34 2c 20 73 69 67 6e 3d 31 36 31 43 44 36 39
15-56-17-059| [TFTP] 00000060: 30 32 46 36 30 44 43 42 45 36 38 38 38 44 41 37
15-56-17-060| [TFTP] 00000070: 38 31 44 38 44 31 44 45 37 45 30 39 34 35 43 38
15-56-17-062| [TFTP] 00000080: 30 46 33 35 34 33 37 34 37 43 38 37 31 34 36 36
15-56-17-063| [TFTP] 00000090: 31 31 39 34 45 34 32 30 35 35 33 37 35 46 43 36
15-56-17-065| [TFTP] 000000a0: 33 46 37 42 34 42 32 42 45 32 35 34 41 39 46 44
15-56-17-065| [TFTP] 000000b0: 34 30 31 36 36 41 32 46 46 43 45 45 42 39 34 44
15-56-17-067| [TFTP] 000000c0: 46 34 44 38 32 31 31 46 45 44 41 31 34 34 33 45
15-56-17-068| [TFTP] 000000d0: 36 35 45 44 37 34 45 30 39 2e 00
15-56-17-070| [TFTP] WTware v.5.4.34 found at host [], mac B8:27:EB:4A:79:F1.
15-56-17-121| [TFTP] Sending WTware TFTP version.
15-56-17-121| [TFTP] Got RRQ, 45 bytes.
15-56-17-123| [TFTP] 00000000: 45 76 65 72 79 6f 6e 65 2f 6c 69 73 74 2e 77 74
15-56-17-123| [TFTP] 00000010: 63 00 6f 63 74 65 74 00 74 73 69 7a 65 00 30 00
15-56-17-125| [TFTP] 00000020: 62 6c 6b 73 69 7a 65 00 31 34 30 30 00
15-56-17-126| [TFTP] Request block size 1400, forced to 1360.
15-56-17-128| [TFTP] Requests file "Everyone\list.wtc". Tsize is requested, blksize 1360 bytes.
15-56-17-128| [TFTP] Sending OASK (tsize 1209, blksize 1360).
15-56-17-130| [TFTP] Transfer of file "Everyone\list.wtc" completed.
15-56-17-130| [TFTP] Connection closed.
15-56-17-132| [TFTP] Got RRQ, 66 bytes.
15-56-17-133| [TFTP] 00000000: 54 65 72 6d 69 6e 61 6c 73 2f 42 38 2e 32 37 2e
15-56-17-135| [TFTP] 00000010: 45 42 2e 34 41 2e 37 39 2e 46 31 2f 63 6f 6e 66
15-56-17-135| [TFTP] 00000020: 69 67 2e 77 74 63 00 6f 63 74 65 74 00 74 73 69
15-56-17-137| [TFTP] 00000030: 7a 65 00 30 00 62 6c 6b 73 69 7a 65 00 31 34 30
15-56-17-138| [TFTP] 00000040: 30 00
15-56-17-139| [TFTP] Request block size 1400, forced to 1360.
15-56-17-140| [TFTP] Requests file "Terminals\B8.27.EB.4A.79.F1\config.wtc". Tsize is requested, blksize 1360 bytes.
15-56-17-142| [TFTP] Sending OASK (tsize 80, blksize 1360).
15-56-17-142| [TFTP] Transfer of file "Terminals\B8.27.EB.4A.79.F1\config.wtc" completed.
15-56-17-144| [TFTP] Connection closed.
15-56-17-144| [TFTP] Got RRQ, 44 bytes.
15-56-17-146| [TFTP] 00000000: 45 76 65 72 79 6f 6e 65 2f 61 6c 6c 2e 77 74 63
15-56-17-147| [TFTP] 00000010: 00 6f 63 74 65 74 00 74 73 69 7a 65 00 30 00 62
15-56-17-148| [TFTP] 00000020: 6c 6b 73 69 7a 65 00 31 34 30 30 00
15-56-17-149| [TFTP] Request block size 1400, forced to 1360.
15-56-17-151| [TFTP] Requests file "Everyone\all.wtc". Tsize is requested, blksize 1360 bytes.
15-56-17-151| [TFTP] Sending OASK (tsize 196, blksize 1360).
15-56-17-153| [TFTP] Transfer of file "Everyone\all.wtc" completed.
15-56-17-154| [TFTP] Connection closed.
15-56-17-155| [TFTP] Got RRQ, 47 bytes.
15-56-17-156| [TFTP] 00000000: 45 76 65 72 79 6f 6e 65 2f 77 74 77 61 72 65 2e
15-56-17-158| [TFTP] 00000010: 6c 69 63 00 6f 63 74 65 74 00 74 73 69 7a 65 00
15-56-17-158| [TFTP] 00000020: 30 00 62 6c 6b 73 69 7a 65 00 31 34 30 30 00
15-56-17-160| [TFTP] Request block size 1400, forced to 1360.
15-56-17-160| [TFTP] Requests file "Everyone\wtware.lic". Tsize is requested, blksize 1360 bytes.
15-56-17-162| [TFTP] Sending OASK (tsize 281, blksize 1360).
15-56-17-163| [TFTP] Transfer of file "Everyone\wtware.lic" completed.
15-56-17-164| [TFTP] Connection closed.
15-56-17-165| [TFTP] Got RRQ, 57 bytes.
15-56-17-167| [TFTP] 00000000: 54 65 6d 70 6c 61 74 65 73 2f 4e 65 77 2d 44 6f
15-56-17-168| [TFTP] 00000010: 6d 61 69 6e 2d 4f 6e 6c 79 2e 77 74 63 00 6f 63
15-56-17-169| [TFTP] 00000020: 74 65 74 00 74 73 69 7a 65 00 30 00 62 6c 6b 73
15-56-17-170| [TFTP] 00000030: 69 7a 65 00 31 34 30 30 00
15-56-17-172| [TFTP] Request block size 1400, forced to 1360.
15-56-17-172| [TFTP] Requests file "Templates\[removed]". Tsize is requested, blksize 1360 bytes.
15-56-17-174| [TFTP] Sending OASK (tsize 208, blksize 1360).
15-56-17-175| [TFTP] Transfer of file "Templates\[removed]" completed.
15-56-17-176| [TFTP] Connection closed.
15-57-19-314| WTware v.5.4.34/RPi supervisor.
15-57-19-314| WTC listener is active.
15-57-19-314| WTC broadcast listener is active.
15-57-19-314| [        KERNEL] [    0.000000] Booting Linux on physical CPU 0x0
15-57-19-314| [        KERNEL] [    0.000000] Initializing cgroup subsys cpuset
15-57-19-314| [        KERNEL] [    0.000000] Initializing cgroup subsys cpu
15-57-19-314| [        KERNEL] [    0.000000] Initializing cgroup subsys cpuacct
15-57-19-314| [        KERNEL] [    0.000000] Linux version 4.4.14 (aka@c12) (gcc version 5.3.1 20160413 (Ubuntu/Linaro 5.3.1-14ubuntu2) ) #8 SMP Mon Jul 11 00:32:40 SAMT 2016
15-57-19-314| [        KERNEL] [    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
15-57-19-314| [        KERNEL] [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
15-57-19-314| [        KERNEL] [    0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
15-57-19-314| [        KERNEL] [    0.000000] cma: Reserved 8 MiB at 0x3a800000
15-57-19-314| [        KERNEL] [    0.000000] Memory policy: Data cache writealloc
15-57-19-314| [        KERNEL] [    0.000000] On node 0 totalpages: 241664
15-57-19-314| [        KERNEL] [    0.000000] free_area_init_node: node 0, pgdat 808be480, node_mem_map b9fa6000
15-57-19-314| [        KERNEL] [    0.000000]   Normal zone: 2124 pages used for memmap
15-57-19-314| [        KERNEL] [    0.000000]   Normal zone: 0 pages reserved
15-57-19-314| [        KERNEL] [    0.000000]   Normal zone: 241664 pages, LIFO batch:31
15-57-19-314| [        KERNEL] [    0.000000] [bcm2709_smp_init_cpus] enter (94c0->f3003010)
15-57-19-314| [        KERNEL] [    0.000000] [bcm2709_smp_init_cpus] ncores=4
15-57-19-314| [        KERNEL] [    0.000000] PERCPU: Embedded 11 pages/cpu @b9f6b000 s12428 r8192 d24436 u45056
15-57-19-314| [        KERNEL] [    0.000000] pcpu-alloc: s12428 r8192 d24436 u45056 alloc=11*4096
15-57-19-314| [        KERNEL] [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
15-57-19-314| [        KERNEL] [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 239540
15-57-19-314| [        KERNEL] [    0.000000] Kernel command line: 8250.nr_uarts=1 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2709.boardrev=0xa02082 bcm2709.serial=0x4a79f1 smsc95xx.macaddr=B8:27:EB:4A:79:F1 bcm2708_fb.fbswap=1 bcm2709.uart_clock=48000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000  console=ttyAMA0,115200 console=tty1 quiet
15-57-19-314| [        KERNEL] [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
15-57-19-314| [        KERNEL] [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
15-57-19-314| [        KERNEL] [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
15-57-19-314| [        KERNEL] [    0.000000] Memory: 939564K/966656K available (3759K kernel code, 164K rwdata, 1164K rodata, 3836K init, 365K bss, 18900K reserved, 8192K cma-reserved)
15-57-19-314| [        KERNEL] [    0.000000] Virtual kernel memory layout:
15-57-19-314| [        KERNEL] [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
15-57-19-314| [        KERNEL] [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
15-57-19-314| [        KERNEL] [    0.000000]     vmalloc : 0xbb800000 - 0xff800000   (1088 MB)
15-57-19-314| [        KERNEL] [    0.000000]     lowmem  : 0x80000000 - 0xbb000000   ( 944 MB)
15-57-19-314| [        KERNEL] [    0.000000]     modules : 0x7f000000 - 0x80000000   (  16 MB)
15-57-19-314| [        KERNEL] [    0.000000]       .text : 0x80008000 - 0x804d6fac   (4924 kB)
15-57-19-314| [        KERNEL] [    0.000000]       .init : 0x804d7000 - 0x80896000   (3836 kB)
15-57-19-314| [        KERNEL] [    0.000000]       .data : 0x80896000 - 0x808bf368   ( 165 kB)
15-57-19-314| [        KERNEL] [    0.000000]        .bss : 0x808c2000 - 0x8091d50c   ( 366 kB)
15-57-19-314| [        KERNEL] [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
15-57-19-314| [        KERNEL] [    0.000000] Hierarchical RCU implementation.
15-57-19-314| [        KERNEL] [    0.000000] 	Build-time adjustment of leaf fanout to 32.
15-57-19-314| [        KERNEL] [    0.000000] NR_IRQS:16 nr_irqs:16 16
15-57-19-314| [        KERNEL] [    0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
15-57-19-314| [        KERNEL] [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
15-57-19-314| [        KERNEL] [    0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
15-57-19-314| [        KERNEL] [    0.000023] Switching to timer-based delay loop, resolution 52ns
15-57-19-314| [        KERNEL] [    0.000193] Console: colour dummy device 80x30
15-57-19-314| [        KERNEL] [    0.000370] console [tty1] enabled
15-57-19-314| [        KERNEL] [    0.000392] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
15-57-19-314| [        KERNEL] [    0.000410] pid_max: default: 32768 minimum: 301
15-57-19-314| [        KERNEL] [    0.000532] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
15-57-19-314| [        KERNEL] [    0.000543] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
15-57-19-314| [        KERNEL] [    0.001426] Disabling cpuset control group subsystem
15-57-19-314| [        KERNEL] [    0.001455] Initializing cgroup subsys io
15-57-19-314| [        KERNEL] [    0.001480] Initializing cgroup subsys memory
15-57-19-314| [        KERNEL] [    0.001514] Initializing cgroup subsys devices
15-57-19-314| [        KERNEL] [    0.001530] Initializing cgroup subsys freezer
15-57-19-314| [        KERNEL] [    0.001569] CPU: Testing write buffer coherency: ok
15-57-19-314| [        KERNEL] [    0.002017] CPU0: update cpu_capacity 1024
15-57-19-314| [        KERNEL] [    0.002029] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
15-57-19-314| [        KERNEL] [    0.002038] [bcm2709_smp_prepare_cpus] enter
15-57-19-314| [        KERNEL] [    0.002122] Setting up static identity map for 0x8240 - 0x8274
15-57-19-314| [        KERNEL] [    0.003469] [bcm2709_boot_secondary] cpu:1 started (0) 17
15-57-19-314| [        KERNEL] [    0.003672] [bcm2709_secondary_init] enter cpu:1
15-57-19-314| [        KERNEL] [    0.003711] CPU1: update cpu_capacity 1024
15-57-19-314| [        KERNEL] [    0.003717] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
15-57-19-314| [        KERNEL] [    0.004053] [bcm2709_boot_secondary] cpu:2 started (0) 17
15-57-19-314| [        KERNEL] [    0.004206] [bcm2709_secondary_init] enter cpu:2
15-57-19-314| [        KERNEL] [    0.004225] CPU2: update cpu_capacity 1024
15-57-19-314| [        KERNEL] [    0.004231] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
15-57-19-314| [        KERNEL] [    0.004537] [bcm2709_boot_secondary] cpu:3 started (0) 17
15-57-19-314| [        KERNEL] [    0.004673] [bcm2709_secondary_init] enter cpu:3
15-57-19-314| [        KERNEL] [    0.004692] CPU3: update cpu_capacity 1024
15-57-19-314| [        KERNEL] [    0.004698] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
15-57-19-314| [        KERNEL] [    0.004751] Brought up 4 CPUs
15-57-19-314| [        KERNEL] [    0.004772] SMP: Total of 4 processors activated (153.60 BogoMIPS).
15-57-19-314| [        KERNEL] [    0.004780] CPU: All CPU(s) started in HYP mode.
15-57-19-314| [        KERNEL] [    0.004786] CPU: Virtualization extensions available.
15-57-19-314| [        KERNEL] [    0.005170] devtmpfs: initialized
15-57-19-314| [        KERNEL] [    0.013770] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
15-57-19-314| [        KERNEL] [    0.014111] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
15-57-19-314| [        KERNEL] [    0.014590] pinctrl core: initialized pinctrl subsystem
15-57-19-314| [        KERNEL] [    0.014986] NET: Registered protocol family 16
15-57-19-314| [        KERNEL] [    0.020133] DMA: preallocated 4096 KiB pool for atomic coherent allocations
15-57-19-314| [        KERNEL] [    0.026616] Serial: AMBA PL011 UART driver
15-57-19-314| [        KERNEL] [    0.026809] uart-pl011 3f201000.uart: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
15-57-19-314| [        KERNEL] [    0.027017] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
15-57-19-314| [        KERNEL] [    0.091099] bcm2835-dma 3f007000.dma: missing interrupts-names property in device tree - legacy interpretation is used
15-57-19-314| [        KERNEL] [    0.092714] usbcore: registered new interface driver usbfs
15-57-19-314| [        KERNEL] [    0.092848] usbcore: registered new interface driver hub
15-57-19-314| [        KERNEL] [    0.092940] usbcore: registered new device driver usb
15-57-19-314| [        KERNEL] [    0.100101] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-04-24 17:58
15-57-19-314| [        KERNEL] [    0.112122] clocksource: Switched to clocksource arch_sys_counter
15-57-19-314| [        KERNEL] [    0.124449] NET: Registered protocol family 2
15-57-19-314| [        KERNEL] [    0.125015] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
15-57-19-314| [        KERNEL] [    0.125127] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
15-57-19-314| [        KERNEL] [    0.125315] TCP: Hash tables configured (established 8192 bind 8192)
15-57-19-314| [        KERNEL] [    0.125413] UDP hash table entries: 512 (order: 2, 16384 bytes)
15-57-19-314| [        KERNEL] [    0.125460] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
15-57-19-314| [        KERNEL] [    0.125654] NET: Registered protocol family 1
15-57-19-314| [        KERNEL] [    2.110559] futex hash table entries: 1024 (order: 4, 65536 bytes)
15-57-19-314| [        KERNEL] [    2.160560] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
15-57-19-314| [        KERNEL] [    2.160588] io scheduler noop registered
15-57-19-314| [        KERNEL] [    2.160606] io scheduler deadline registered (default)
15-57-19-314| [        KERNEL] [    2.165458] BCM2708FB: allocated DMA memory fac00000
15-57-19-314| [        KERNEL] [    2.165484] bcm2708_fb soc:fb: couldn't allocate a DMA channel
15-57-19-314| [        KERNEL] [    2.165541] bcm2708_fb soc:fb: probe failed, err -19
15-57-19-314| [        KERNEL] [    3.167392] bcm2835-rng 3f104000.rng: hwrng registered
15-57-19-314| [        KERNEL] [    3.167662] vc-cma: Videocore CMA driver
15-57-19-314| [        KERNEL] [    3.167672] vc-cma: vc_cma_base      = 0x00000000
15-57-19-314| [        KERNEL] [    3.167680] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)
15-57-19-314| [        KERNEL] [    3.167688] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)
15-57-19-314| [        KERNEL] [    3.167925] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
15-57-19-314| [        KERNEL] [    3.170251] vchiq: vchiq_init_state: slot_zero = 0xbac00000, is_master = 0
15-57-19-314| [        KERNEL] [    3.174387] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
15-57-19-314| [        KERNEL] [    3.374747] Core Release: 2.80a
15-57-19-314| [        KERNEL] [    3.374767] Setting default values for core params
15-57-19-314| [        KERNEL] [    3.374800] Finished setting default values for core params
15-57-19-314| [        KERNEL] [    3.575228] Using Buffer DMA mode
15-57-19-314| [        KERNEL] [    3.575240] Periodic Transfer Interrupt Enhancement - disabled
15-57-19-314| [        KERNEL] [    3.575247] Multiprocessor Interrupt Enhancement - disabled
15-57-19-314| [        KERNEL] [    3.575256] OTG VER PARAM: 0, OTG VER FLAG: 0
15-57-19-314| [        KERNEL] [    3.575285] Dedicated Tx FIFOs mode
15-57-19-314| [        KERNEL] [    3.575665] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xbac48000 dma = 0xfac48000 len=9024
15-57-19-314| [        KERNEL] [    3.575695] FIQ FSM acceleration enabled for :
15-57-19-314| [        KERNEL] [    3.575695] Non-periodic Split Transactions
15-57-19-314| [        KERNEL] [    3.575695] Periodic Split Transactions
15-57-19-314| [        KERNEL] [    3.575695] High-Speed Isochronous Endpoints
15-57-19-314| [        KERNEL] [    3.575695] Interrupt/Control Split Transaction hack enabled
15-57-19-314| [        KERNEL] [    3.575717] dwc_otg: Microframe scheduler enabled
15-57-19-314| [        KERNEL] [    3.575763] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x802590f0
15-57-19-314| [        KERNEL] [    3.575777] WARN::hcd_init_fiq:414: FIQ ASM at 0x80259454 length 36
15-57-19-314| [        KERNEL] [    3.575792] WARN::hcd_init_fiq:439: MPHI regs_base at 0xbb90a000
15-57-19-314| [        KERNEL] [    3.575849] dwc_otg 3f980000.usb: DWC OTG Controller
15-57-19-314| [        KERNEL] [    3.575885] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
15-57-19-314| [        KERNEL] [    3.575916] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
15-57-19-314| [        KERNEL] [    3.575965] Init: Port Power? op_state=1
15-57-19-314| [        KERNEL] [    3.575972] Init: Power Port (0)
15-57-19-314| [        KERNEL] [    3.576139] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
15-57-19-314| [        KERNEL] [    3.576152] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
15-57-19-314| [        KERNEL] [    3.576164] usb usb1: Product: DWC OTG Controller
15-57-19-314| [        KERNEL] [    3.576175] usb usb1: Manufacturer: Linux 4.4.14 dwc_otg_hcd
15-57-19-314| [        KERNEL] [    3.576186] usb usb1: SerialNumber: 3f980000.usb
15-57-19-314| [        KERNEL] [    3.576895] hub 1-0:1.0: USB hub found
15-57-19-314| [        KERNEL] [    3.576940] hub 1-0:1.0: 1 port detected
15-57-19-314| [        KERNEL] [    3.577379] dwc_otg: FIQ enabled
15-57-19-314| [        KERNEL] [    3.577387] dwc_otg: NAK holdoff enabled
15-57-19-314| [        KERNEL] [    3.577394] dwc_otg: FIQ split-transaction FSM enabled
15-57-19-314| [        KERNEL] [    3.577478] Module dwc_common_port init
15-57-19-314| [        KERNEL] [    3.578546] bcm2835-cpufreq: min=600000 max=1200000
15-57-19-314| [        KERNEL] [    3.580864] sdhost: log_buf @ bac46000 (fac46000)
15-57-19-314| [        KERNEL] [    3.652137] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
15-57-19-314| [        KERNEL] [    3.674577] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
15-57-19-314| [        KERNEL] [    3.674588] mmc-bcm2835 3f300000.mmc: Forcing PIO mode
15-57-19-314| [        KERNEL] [    3.709076] mmc0: host does not support reading read-only switch, assuming write-enable
15-57-19-314| [        KERNEL] [    3.710962] mmc0: new high speed SDHC card at address 59b4
15-57-19-314| [        KERNEL] [    3.711280] mmcblk0: mmc0:59b4 USD00 29.5 GiB
15-57-19-314| [        KERNEL] [    3.712366] hidraw: raw HID events driver (C) Jiri Kosina
15-57-19-314| [        KERNEL] [    3.712789]  mmcblk0: p1
15-57-19-314| [        KERNEL] [    3.712835] usbcore: registered new interface driver usbhid
15-57-19-314| [        KERNEL] [    3.712840] usbhid: USB HID core driver
15-57-19-314| [        KERNEL] [    3.713211] NET: Registered protocol family 17
15-57-19-314| [        KERNEL] [    3.713390] Registering SWP/SWPB emulation handler
15-57-19-314| [        KERNEL] [    3.713738] registered taskstats version 1
15-57-19-314| [        KERNEL] [    3.713785] vc-sm: Videocore shared memory driver
15-57-19-314| [        KERNEL] [    3.713792] [vc_sm_connected_init]: start
15-57-19-314| [        KERNEL] [    3.721643] [vc_sm_connected_init]: end - returning 0
15-57-19-314| [        KERNEL] [    3.723999] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
15-57-19-314| [        KERNEL] [    3.727062] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
15-57-19-314| [        KERNEL] [    3.728552] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
15-57-19-314| [        KERNEL] [    3.730040] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
15-57-19-314| [        KERNEL] [    3.732739] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
15-57-19-314| [        KERNEL] [    3.735140] console [ttyAMA0] enabled
15-57-19-314| [        KERNEL] [    3.738637] Freeing unused kernel memory: 3836K (804d7000 - 80896000)
15-57-19-314| [        KERNEL] [    3.772491] Indeed it is in host mode hprt0 = 00021501
15-57-19-314| [        KERNEL] [    3.819812] mmc1: new high speed SDIO card at address 0001
15-57-19-314| [        KERNEL] [    3.952143] usb 1-1: new high-speed USB device number 2 using dwc_otg
15-57-19-314| [        KERNEL] [    3.952229] Indeed it is in host mode hprt0 = 00001101
15-57-19-314| [       hotplug] [    4.014132] Block device 179:1. No action.
15-57-19-314| [       hotplug] [    4.018835] Block device 179:0. No action.
15-57-19-314| [          pfac] [    4.044534] Run /sbin/initrd.
15-57-19-314| [          pfac] [    4.044702] Ok, PID 532.
15-57-19-314| [        initrd] [    4.046366] WTware shell v.5.4.34/RPi
15-57-19-314| [        initrd] [    4.046533]             misc.cpp (  211): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
15-57-19-314| [        KERNEL] [    4.152256] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
15-57-19-314| [        KERNEL] [    4.152267] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
15-57-19-314| [        KERNEL] [    4.152651] hub 1-1:1.0: USB hub found
15-57-19-314| [        KERNEL] [    4.152713] hub 1-1:1.0: 5 ports detected
15-57-19-314| [        KERNEL] [    4.432129] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
15-57-19-314| [        KERNEL] [    4.532244] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
15-57-19-314| [        KERNEL] [    4.532251] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
15-57-19-314| [        KERNEL] [    4.612128] usb 1-1.4: new low-speed USB device number 4 using dwc_otg
15-57-19-314| [        KERNEL] [    4.717199] usb 1-1.4: New USB device found, idVendor=413c, idProduct=301a
15-57-19-314| [        KERNEL] [    4.717207] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
15-57-19-314| [        KERNEL] [    4.717213] usb 1-1.4: Product: Dell MS116 USB Optical Mouse
15-57-19-314| [        KERNEL] [    4.717219] usb 1-1.4: Manufacturer: PixArt
15-57-19-314| [        KERNEL] [    4.720697] input: PixArt Dell MS116 USB Optical Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:413C:301A.0001/input/input0
15-57-19-314| [        KERNEL] [    4.720935] hid-generic 0003:413C:301A.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-3f980000.usb-1.4/input0
15-57-19-314| [        KERNEL] [    4.952127] usb 1-1.5: new high-speed USB device number 5 using dwc_otg
15-57-19-314| [        KERNEL] [    5.067997] usb 1-1.5: New USB device found, idVendor=413c, idProduct=1010
15-57-19-314| [        KERNEL] [    5.068005] usb 1-1.5: New USB device strings: Mfr=0, Product=11, SerialNumber=0
15-57-19-314| [        KERNEL] [    5.068011] usb 1-1.5: Product: USB 2.0 Hub [MTT]
15-57-19-314| [        KERNEL] [    5.069741] hub 1-1.5:1.0: USB hub found
15-57-19-314| [        KERNEL] [    5.071365] hub 1-1.5:1.0: 4 ports detected
15-57-19-314| [        KERNEL] [    5.352125] usb 1-1.5.4: new low-speed USB device number 6 using dwc_otg
15-57-19-314| [        KERNEL] [    5.476051] usb 1-1.5.4: New USB device found, idVendor=413c, idProduct=2110
15-57-19-314| [        KERNEL] [    5.476059] usb 1-1.5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
15-57-19-314| [        KERNEL] [    5.476065] usb 1-1.5.4: Product: Dell Wired Multimedia Keyboard
15-57-19-314| [        KERNEL] [    5.476070] usb 1-1.5.4: Manufacturer: Dell
15-57-19-314| [        KERNEL] [    5.505914] input: Dell Dell Wired Multimedia Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5.4/1-1.5.4:1.0/0003:413C:2110.0002/input/input1
15-57-19-314| [        KERNEL] [    5.562541] hid-generic 0003:413C:2110.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell Wired Multimedia Keyboard] on usb-3f980000.usb-1.5.4/input0
15-57-19-314| [        KERNEL] [    5.601534] input: Dell Dell Wired Multimedia Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5.4/1-1.5.4:1.1/0003:413C:2110.0003/input/input2
15-57-19-314| [        KERNEL] [    5.652447] hid-generic 0003:413C:2110.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [Dell Dell Wired Multimedia Keyboard] on usb-3f980000.usb-1.5.4/input1
15-57-19-314| [        initrd] [    5.890507] Load ethernet drivers.
15-57-19-314| [        initrd] [    5.890599] modprobe smsc95xx.
15-57-19-314| [        KERNEL] [    5.896818] smsc95xx v1.0.4
15-57-19-314| [        KERNEL] [    5.953728] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:4a:79:f1
15-57-19-314| [        KERNEL] [    5.953833] usbcore: registered new interface driver smsc95xx
15-57-19-314| [        KERNEL] [    6.013154] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
15-57-19-314| [        KERNEL] [    8.376113] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
15-57-19-314| [        initrd] [    8.870090] dhcp: 405 bytes from [removed]
15-57-19-314| [        initrd] [    8.870175] 00000000:0000018100000000001100000a0306010a030640004300440181000002010600  ..................@.C.D........
15-57-19-314| [        initrd] [    8.870242] 00000020:67458b6b00000000000000000a0306400a0300e30a030601b827eb4a79f10000  gE.k...........@.........'.Jy...
15-57-19-314| [        initrd] [    8.870309] 00000040:0000000000000000000000000000000000000000000000000000000000000000  ................................
15-57-19-314| [        initrd] [    8.870374] 00000060:0000000000000000000000000000000000000000000000000000000000000000  ................................
15-57-19-314| [        KERNEL] [   10.324338] random: nonblocking pool is initialized
15-57-19-314| [        initrd] [   10.350078] dhcp: 405 bytes from [removed]
15-57-19-314| [        initrd] [   10.350150] 00000000:0000018100000000001100000a0306010a030640004300440181000002010600  ..................@.C.D........
15-57-19-314| [        initrd] [   10.350215] 00000020:67458b6b00000000000000000a0306400a0300e30a030601b827eb4a79f10000  gE.k...........@.........'.Jy...
15-57-19-314| [        initrd] [   10.350279] 00000040:0000000000000000000000000000000000000000000000000000000000000000  ................................
15-57-19-314| [        initrd] [   10.350343] 00000060:0000000000000000000000000000000000000000000000000000000000000000  ................................
15-57-19-314| [        initrd] [   10.380055] dhcp: server address [removed]
15-57-19-314| [        initrd] [   10.380114] dhcp: [removed]
15-57-19-314| [        initrd] [   10.380169] dhcp: default gateway [removed]
15-57-19-314| [        initrd] [   10.380233] dhcp: DNS [removed]
15-57-19-314| [        initrd] [   10.380289] dhcp: DNS [removed]
15-57-19-314| [        initrd] [   10.380344] dhcp: domain [removed]
15-57-19-314| [        initrd] [   10.380400] dhcp: TFTP from 066 [removed]
15-57-19-314| [        initrd] [   10.380454] dhcp: TFTP [removed]
15-57-19-314| [        initrd] [   10.380508] dhcp: boot file (067) 5.4.34/wtware.pxe.
15-57-19-314| [        initrd] [   10.380564] TFTP binary "5.4.34/", configs prefix "", using "/" slash.
15-57-19-314| [        initrd] [   10.380619] dhcp: wtpassword hash [removed]
15-57-19-314| Send broadcast WTCU discover.
15-57-19-314| [        initrd] [   10.386727] Run '/sbin/httpd', log '/tmp/httpd.out', env '', pid ''.
15-57-19-314| [          pfac] [   10.386836] Run /sbin/httpd.
15-57-19-314| [          pfac] [   10.387066] Ok, PID 573.
15-57-19-314| [         httpd] [   10.389851] HTTP Server, WTware v.5.4.34/RPi
15-57-19-314| [        initrd] [   10.446761] USB: 0424:9514 Standard Microsystems Corp. SMC9514 Hub.
15-57-19-314| [        initrd] [   10.446857] USB: 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter.
15-57-19-314| [        initrd] [   10.446897] USB: 413c:301a Dell Computer Corp..
15-57-19-314| [        initrd] [   10.446933] USB: 413c:1010 Dell Computer Corp..
15-57-19-314| [        initrd] [   10.446969] USB: 413c:2110 Dell Computer Corp..
15-57-19-314| [        initrd] [   10.447005] [TFTP]: download file Everyone/list.wtc from [removed]
15-57-19-314| [        initrd] [   10.452952] WTware TFTP v.5.4.34.
15-57-19-314| /--- FILE "/tmp/list.wtc" -----------------------
15-57-19-314| | #
15-57-19-314| | # Include files list.
15-57-19-314| | #
15-57-19-314| | # This way of terminals configuration is meant only for manual 
15-57-19-314| | # terminals management. Graphic configurator doesn't read list.wtc,
15-57-19-314| | # doesn't read or edit files from ListIncludes directory. So be careful
15-57-19-314| | # not to configure one terminal in configurator and in list.wtc.
15-57-19-314| | #
15-57-19-314| | # This file uses such syntax:
15-57-19-314| | #  
15-57-19-314| | #    01.02.03.04.05.06[([username@][terminalname])] [file [file ...]]] [# note]
15-57-19-314| | #
15-57-19-314| | # Examples:
15-57-19-314| | #
15-57-19-314| | #     02.03.04.05.06.07 file1
15-57-19-314| | #
15-57-19-314| | # It means that terminal with MAC-address 02.03.04.05.06.07 
15-57-19-314| | # reads parameters from file ListIncludes/file1.
15-57-19-314| | #
15-57-19-314| | #
15-57-19-314| | #     03.04.05.06.07.08(vasja@) file2
15-57-19-314| | #
15-57-19-314| | # It means that terminal with MAC-address 03.04.05.06.07.08 
15-57-19-314| | # reads parameters from file ListIncludes/file2  
15-57-19-314| | # and sets user name "vasja" in "Windows login" window.
15-57-19-314| | #
15-57-19-314| | #
15-57-19-314| | #     04.05.06.07.08.09(term5) file6 file7 # John notebook.
15-57-19-314| | #
15-57-19-314| | # It means that terminal with MAC-address 04.05.06.07.08.09 
15-57-19-314| | # is named term5, the same as specify clienthostname parameter,
15-57-19-314| | # and it reads parameters from files ListIncludes/file6 and
15-57-19-314| | # ListIncludes/file7.
15-57-19-314| | #
15-57-19-314| | #
15-57-19-314| | # To specify user name using non-latin letters open this file in
15-57-19-314| | # Notepad and save with Encoding: Unicode.
15-57-19-314| | #
15-57-19-314| \----------------------------------------------------
15-57-19-314| [        initrd] [   10.461830] [TFTP]: download file Terminals/B8.27.EB.4A.79.F1/config.wtc from [removed]
15-57-19-314| /--- FILE "/tmp/config.wtc" -----------------------
15-57-19-314| | template [removed]
15-57-19-314| | connection 
15-57-19-314| \----------------------------------------------------
15-57-19-314| [        initrd] [   10.464157] [TFTP]: download file Everyone/all.wtc from [removed]
15-57-19-314| /--- FILE "/tmp/all.wtc" -----------------------
15-57-19-314| | [BOM]
15-57-19-314| | graphic=abcdfg
15-57-19-314| | sound=on
15-57-19-314| | timezone=GMT Standard Time
15-57-19-314| | bpp=32
15-57-19-314| | keyboard=en-gb
15-57-19-314| | sleep=10,poweroff
15-57-19-314| \----------------------------------------------------
15-57-19-314| [        initrd] [   10.466251] [TFTP]: download file Everyone/wtware.lic from [removed]
15-57-19-314| [        initrd] [   10.468652] [TFTP]: download file Templates/[removed] from [removed]
15-57-19-314| /--- FILE "/tmp/tmp.wtc" -----------------------
15-57-19-314| | [BOM]
15-57-19-314| | loadbalanceinfo=tsv://MS Terminal Services Plugin.1.RD-SESSION-HOSTS
15-57-19-314| | server=[removed]
15-57-19-314| \----------------------------------------------------
15-57-19-314| /--- FILE "/etc/config.compiled" -----------------------
15-57-19-314| | [BOM]
15-57-19-314| | graphic=abcdfg
15-57-19-314| | sound=on
15-57-19-314| | timezone=GMT Standard Time
15-57-19-314| | bpp=32
15-57-19-314| | keyboard=en-gb
15-57-19-314| | sleep=10,poweroff
15-57-19-314| | loadbalanceinfo=tsv://MS Terminal Services Plugin.1.RD-SESSION-HOSTS
15-57-19-314| | server=[removed]
15-57-19-314| | connection 
15-57-19-314| \----------------------------------------------------
15-57-19-314| [        initrd] [   10.471178] Hostname: "wtwB827EB4A79F1".
15-57-19-314| Everyone can control terminal by RSH.
15-57-19-314| RSH: listener is active.
15-57-19-314| Send broadcast WTCU discover.
15-57-19-314| [         httpd] [   10.665094] Reread settings.
15-57-19-314| [         httpd] [   10.665157] Everyone can control terminal by HTTP.
15-57-19-314| [            gm] [   10.665181] WTware session manager v.5.4.34/RPi.
15-57-19-314| [            gm] [   10.665220]          fstream.cpp (  277): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
15-57-19-314| [            gm] [   10.665259]             misc.cpp (   22): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
15-57-19-314| [            gm] [   10.665298] Add keyboard event2: Dell Dell Wired Multimedia Keyboard.
15-57-19-314| [            gm] [   10.665336] Add keyboard event1: Dell Dell Wired Multimedia Keyboard.
15-57-19-314| [            gm] [   10.720067] EV_REL flag found. Add mouse event0: PixArt Dell MS116 USB Optical Mouse.
15-57-19-314| [            gm] [   10.720233] graphdriver_f_fb.cpp (  602): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
15-57-19-314| [            gm] [   10.720300] Display mode: 1024x768, 16 bit, 0 Hz, modeline "", DDC enabled, connector 0.
15-57-19-314| [            gm] [   13.722461] graphdriver_f_fb.cpp (  538): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
15-57-19-314| [            gm] [   13.722543]    graphdriver_f.cpp (  323): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
15-57-19-314| [            gm] [   13.722609]     graphconsole.cpp (  630): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
15-57-19-314| [            gm] [   13.722818] Caught signal SIGSEGV.
15-57-19-314| [          pfac] [   13.900483] Process pid 532 terminated, status 00000000.
15-57-19-314| [          pfac] [   13.900604]                uds.h (   63): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
15-57-19-314| [          pfac] [   13.900670]            hotplug.h (   85): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
15-57-19-316| Connection from wtc.exe at 10.3.0.227.
15-57-20-592| [        KERNEL] [   73.995093] usb 1-1.4: USB disconnect, device number 4
15-57-22-118| [        KERNEL] [   75.512135] usb 1-1.4: new low-speed USB device number 7 using dwc_otg
15-57-22-318| [        KERNEL] [   75.617537] usb 1-1.4: New USB device found, idVendor=413c, idProduct=301a
15-57-22-320| [        KERNEL] [   75.617545] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
15-57-22-321| [        KERNEL] [   75.617551] usb 1-1.4: Product: Dell MS116 USB Optical Mouse
15-57-22-323| [        KERNEL] [   75.617557] usb 1-1.4: Manufacturer: PixArt
15-57-22-323| [        KERNEL] [   75.620734] input: PixArt Dell MS116 USB Optical Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:413C:301A.0004/input/input3
15-57-22-325| [        KERNEL] [   75.620979] hid-generic 0003:413C:301A.0004: input,hidraw0: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-3f980000.usb-1.4/input0
15-57-22-326| [       hotplug] [   75.621468]                uds.h (   63): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
15-57-22-328| [       hotplug] [   75.621547]            hotplug.h (   85): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.

aka
SUPPORT
SUPPORT
Posts: 706
Joined: Fri Dec 03, 2004 2:05 pm
Contact:

Re: 5.4.34 on RPi3 Broken

Post by aka » Sun Jul 17, 2016 6:32 pm

Please, try to write new SD, with new wtware version.
Looks like network boot idea did not work on RPi. New kernel that we put into new wtware depends on new firmware. Firmware is a binary files on SD, that RPi maintainers publish. With old firmware on SD, newer kernel starts with strange errors. And it is not the first case, when new kernel did not work with old firmware. Write on RPi forum, that backward compatibility is really good idea.

J1mbo
Posts: 57
Joined: Mon Mar 14, 2016 6:24 pm

Re: 5.4.34 on RPi3 Broken

Post by J1mbo » Mon Jul 18, 2016 1:40 pm

Thanks, we will test.

Perhaps in a future release, the code on the SD card will enable us to push new firmware over the network too, i.e. run a script to update the files on the SD card over the network and then restart the terminals.

Post Reply