pxe boot rom not works

WTware network boot ways - bootable floppy, DOS, PXE-loaders, BootROM chips.
Post Reply
luix
Posts: 1
Joined: Tue Jul 22, 2008 7:09 pm

pxe boot rom not works

Post by luix » Tue Jul 22, 2008 7:19 pm

All terminals with Disk on module works fine, but a terminal with network card with boot rom receive IP from DHCP server, and appear the msg "XPE-T01 file not found". At this point, the terminal stop.
TFTP is working fine.

I use wtware pro, TS windows 2003
network card is Intel Undi PXE 2.0 (build 067).

aka
SUPPORT
SUPPORT
Posts: 642
Joined: Fri Dec 03, 2004 2:05 pm
Contact:

Post by aka » Tue Jul 29, 2008 3:26 pm

1. What is specified in 067 DHCP parameter?
2. Open Start > programs > WTware > event viewer > tftp log. Restart the terminal and copy this log here.

Post Reply