Booting Error

WTware network boot ways - bootable floppy, DOS, PXE-loaders, BootROM chips.
Post Reply
ddd3king
Posts: 2
Joined: Thu Apr 17, 2008 9:12 am

Booting Error

Post by ddd3king »

Hi
I am trying to find the issue with my installation from Compact Flash Drive

When I boot, it say
loading bzimge ------------------------
loading wtshell ------------------------------
ready.


Its not doing any thing afterwards. did any one else had a similar problem.
Thanks in advance.
ddd3king
Posts: 2
Joined: Thu Apr 17, 2008 9:12 am

Booting Problem ..... Configuring Kernel

Post by ddd3king »

HI
when I loaded the version 4.2 I was able to do little more progess

I am getting the following messages


Syslinux 3.11 bla bla
loading bzimge ------------------------
loading wtshell ------------------------------
ready.
Uncompressing Linux....OK...Booting Kernel..


It stops there and the curser keeps blinking...nothing happens...can some one help me with it. Also, I am booting from Compact flash card. When I loaded files into it, I did not load config file as from the documentations it says that I can do it while booting .

Did some one know what the issue is
aka
SUPPORT
SUPPORT
Posts: 939
Joined: Fri Dec 03, 2004 2:05 pm
Contact:

Post by aka »

1: memtest. At the beginning of terminal boot, right after BIOS but before bzImage and wtshell start to load, you should press Shift. When succeed you'll see command prompt like that:
boot:_
Type memtest
Wait for at least two hours. If it returns an error, restarts or won't respond - it means problems with your hardware.

2. Reset bios settings to default values. Then turn off all unused devices like usb, com, lpt and audio. If it'll work after disconnecting devices - send us log (http://wtware.com/docs/config.html#syslog).
Post Reply