Boot no sd card - how to undo

WTware network boot ways - bootable floppy, DOS, PXE-loaders, BootROM chips.
Post Reply
HereKittyKitty
Posts: 2
Joined: Sun Feb 25, 2018 7:55 am

Boot no sd card - how to undo

Post by HereKittyKitty » Sun Feb 25, 2018 7:58 am

i did the boot without using sd and it worked. but now i have no clue how to revert back to it not doing this.

everytime i plug in the RPi3, it trys to netboot i want to stop it go back to raspberry pi 3 normal factory settings

akatik
SUPPORT
SUPPORT
Posts: 280
Joined: Mon Jan 17, 2005 6:30 pm
Contact:

Re: Boot no sd card - how to undo

Post by akatik » Sun Feb 25, 2018 12:09 pm

Install good, not broken boot SD. It netboots AFTER it fails to boot from SD.

HereKittyKitty
Posts: 2
Joined: Sun Feb 25, 2018 7:55 am

Re: Boot no sd card - how to undo

Post by HereKittyKitty » Sun Feb 25, 2018 1:04 pm

is there away to remove WT from it so it dont even try? or im stuck with it now trying to NetBoot into WT only

akatik
SUPPORT
SUPPORT
Posts: 280
Joined: Mon Jan 17, 2005 6:30 pm
Contact:

Re: Boot no sd card - how to undo

Post by akatik » Sun Feb 25, 2018 5:34 pm

After writing this programmable SD Pi will always:
- try to boot from SD
- if fails boot by network.
There is no undo and it's not related to wtware. While programming network boot, we execute this raspberry developer's manual: https://www.raspberrypi.org/documentati ... des/msd.md

If you don't need network boot, insert good working SD with what you want to see on Raspberry.

Post Reply