WTware Technical Support

Here is logging manual: https://wtware.com/logs.html

There are no words "remove everything interesting and show only a few lines".

There's no device hw:0:1. I see in log

| 16: [ 0- 0]: digital audio playback
| 48: [ 1- 0]: digital audio playback

Please, read our manual about sound configuration and specify correct sound value:

http://wtware.com/docs5/sound.html

Both errors should be fixed in the next version. Thank you.

For now Wireguard works only on x86 computers. Not on UEFI, not on Raspberry. In the next version it will work also for UEFI and Raspberry. WTware reads configuration file from USB flash, file name must be wg.conf. Or you may write wg.conf file into configs directory using terminal web-interface. In...

aj777 wrote: ↑Wed Oct 14, 2020 8:07 am I use a Argon1 case with button

Argon made their own controller to switch power. We can not control them. Above I wrote about button between pin05 (GPIO03) and pin06 (ground) that should turn on halted Raspberry. Led light is turned on when Pi 4 is halted.

aj777 wrote: ↑Tue Oct 13, 2020 2:02 pm Now it "shuts down", but it does not switch back on again with button.

Which button are you talking about?

If it's PI4 did you upgrade bootloader EEPROM?

M2_position inconfiguration file will determine positions of two displays.

ast line in log "Connection from wtc.exe at 10.1.1.7." and grayed button is right behaviour. Button is grayed when WTware Center is connected to terminal. Button will be gray until connection lost (terminal reboot, for example). There is- no "syslog=" line in terminal config? Reb...

Please, give me wtware log. With wtware log I'll tell which driver is running. Under UEFI the latest (5+ years old...) Broadcom STA with debian patches should run, from this link: https://salsa.debian.org/broadcom-sta-team/broadcom-sta/ Under Legacy BIOS there are different variants. Did you use the...

Send me terminal log file - http://wtware.com/logs.html - to support@wtware.com

Display parameters for Pi should be set in config.txt file - raspberry settings - not in wtware config.

We have never tried two touchscreens. Send us both, and we'll try to support them together.

This firmware is not needed. Does it work without it? Does the latest version still request it?

Hello,
We need terminal log to find out what made wtware feel tired: http://wtware.com/logs.html
Send it to supprt@wtware.com

Update to the newest version. Then if won't help send me to support@wtware.com terminal log - http://wtware.com/logs.html - last section, when there's no network on terminal.