by chris » Wed Nov 22, 2017 10:22 pm
OK, downloaded latest version. When plugging the USB ethernet in, connection to the RPI won't work, so I started without the USB adapter and plugged it in afterwards:
Code: Select all
WTware 5.6.20
WTware 5.6.20/RPi supervisor.
[ KERNEL] [ 0.000000] Booting Linux on physical CPU 0x0
[ KERNEL] [ 0.000000] Linux version 4.9.61 (aka@c12) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #4 SMP Fri Nov 17 04:28:27 +04 2017
[ KERNEL] [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ KERNEL] [ 0.000000] CPU: div instructions available: patching division code
[ KERNEL] [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ KERNEL] [ 0.000000] OF: fdt:Machine model: Raspberry Pi 3 Model B Rev 1.2
[ KERNEL] [ 0.000000] cma: Reserved 8 MiB at 0x3ac00000
[ KERNEL] [ 0.000000] Memory policy: Data cache writealloc
[ KERNEL] [ 0.000000] On node 0 totalpages: 242688
[ KERNEL] [ 0.000000] free_area_init_node: node 0, pgdat 80b22b40, node_mem_map ba3a1000
[ KERNEL] [ 0.000000] Normal zone: 2133 pages used for memmap
[ KERNEL] [ 0.000000] Normal zone: 0 pages reserved
[ KERNEL] [ 0.000000] Normal zone: 242688 pages, LIFO batch:31
[ KERNEL] [ 0.000000] percpu: Embedded 11 pages/cpu @ba367000 s15948 r8192 d20916 u45056
[ KERNEL] [ 0.000000] pcpu-alloc: s15948 r8192 d20916 u45056 alloc=11*4096
[ KERNEL] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ KERNEL] [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 240555
[ KERNEL] [ 0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1024 bcm2708_fb.fbheight=768 bcm2708_fb.fbdepth=32 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 quiet wtboot=mmc
[ KERNEL] [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ KERNEL] [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ KERNEL] [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ KERNEL] [ 0.000000] Memory: 942184K/970752K available (5120K kernel code, 143K rwdata, 920K rodata, 4096K init, 365K bss, 20376K reserved, 8192K cma-reserved)
[ pfac] [ 3.053875] Run /sbin/initrd.
[ KERNEL] [ 0.000000] Virtual kernel memory layout:
[ KERNEL] [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ KERNEL] [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ KERNEL] [ 0.000000] vmalloc : 0xbb800000 - 0xff800000 (1088 MB)
[ KERNEL] [ 0.000000] lowmem : 0x80000000 - 0xbb400000 ( 948 MB)
[ KERNEL] [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
[ KERNEL] [ 0.000000] .text : 0x80008000 - 0x80600000 (6112 kB)
[ KERNEL] [ 0.000000] .init : 0x80700000 - 0x80b00000 (4096 kB)
[ KERNEL] [ 0.000000] .data : 0x80b00000 - 0x80b23df8 ( 144 kB)
[ KERNEL] [ 0.000000] .bss : 0x80b25000 - 0x80b805a0 ( 366 kB)
[ KERNEL] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ KERNEL] [ 0.000000] Hierarchical RCU implementation.
[ KERNEL] [ 0.000000] Build-time adjustment of leaf fanout to 32.
[ KERNEL] [ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ KERNEL] [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys).
[ KERNEL] [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ KERNEL] [ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ KERNEL] [ 0.000017] Switching to timer-based delay loop, resolution 52ns
[ KERNEL] [ 0.000208] Console: colour dummy device 80x30
[ KERNEL] [ 0.000222] console [tty0] enabled
[ KERNEL] [ 0.000238] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ KERNEL] [ 0.000251] pid_max: default: 32768 minimum: 301
[ KERNEL] [ 0.000382] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ KERNEL] [ 0.000389] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ KERNEL] [ 0.001234] Disabling memory control group subsystem
[ KERNEL] [ 0.001286] CPU: Testing write buffer coherency: ok
[ KERNEL] [ 0.001619] CPU0: update cpu_capacity 1024
[ KERNEL] [ 0.001626] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ KERNEL] [ 0.001650] Setting up static identity map for 0x100000 - 0x100034
[ KERNEL] [ 0.003172] CPU1: update cpu_capacity 1024
[ KERNEL] [ 0.003178] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ KERNEL] [ 0.003736] CPU2: update cpu_capacity 1024
[ KERNEL] [ 0.003743] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ KERNEL] [ 0.004297] CPU3: update cpu_capacity 1024
[ pfac] [ 3.055413] Ok, PID 603.
[ KERNEL] [ 0.004304] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ KERNEL] [ 0.004380] Brought up 4 CPUs
[ KERNEL] [ 0.004390] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ KERNEL] [ 0.004394] CPU: All CPU(s) started in HYP mode.
[ KERNEL] [ 0.004397] CPU: Virtualization extensions available.
[ KERNEL] [ 0.004936] devtmpfs: initialized
[ KERNEL] [ 0.014564] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ KERNEL] [ 0.014864] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ KERNEL] [ 0.014881] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ KERNEL] [ 0.015374] pinctrl core: initialized pinctrl subsystem
[ KERNEL] [ 0.015813] NET: Registered protocol family 16
[ KERNEL] [ 0.017659] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ KERNEL] [ 0.027214] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ KERNEL] [ 0.091010] bcm2835-dma 3f007000.dma: DMA legacy API manager at bb80f000, dmachans=0x1
[ KERNEL] [ 0.092743] usbcore: registered new interface driver usbfs
[ KERNEL] [ 0.092823] usbcore: registered new interface driver hub
[ KERNEL] [ 0.092914] usbcore: registered new device driver usb
[ KERNEL] [ 0.100141] raspberrypi-firmware soc:firmware: Attached to firmware from 2017-11-03 17:00
[ KERNEL] [ 0.101931] clocksource: Switched to clocksource arch_sys_counter
[ KERNEL] [ 0.113545] NET: Registered protocol family 2
[ KERNEL] [ 0.114121] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ KERNEL] [ 0.114229] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ KERNEL] [ 0.114413] TCP: Hash tables configured (established 8192 bind 8192)
[ KERNEL] [ 0.114498] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ KERNEL] [ 0.114539] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ KERNEL] [ 0.114713] NET: Registered protocol family 1
[ KERNEL] [ 2.215529] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ KERNEL] [ 2.250062] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ KERNEL] [ 2.250075] io scheduler noop registered
[ KERNEL] [ 2.250080] io scheduler deadline registered (default)
[ KERNEL] [ 2.259569] BCM2708FB: allocated DMA memory fad10000
[ KERNEL] [ 2.259606] BCM2708FB: allocated DMA channel 0 @ bb80f000
[ KERNEL] [ 2.282643] Console: switching to colour frame buffer device 128x48
[ KERNEL] [ 2.297501] bcm2835-rng 3f104000.rng: hwrng registered
[ KERNEL] [ 2.297679] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ KERNEL] [ 2.298488] vc-sm: Videocore shared memory driver
[ KERNEL] [ 2.305342] zram: Added device: zram0
[ KERNEL] [ 2.305387] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ KERNEL] [ 2.533583] Core Release: 2.80a
[ KERNEL] [ 2.533592] Setting default values for core params
[ KERNEL] [ 2.533617] Finished setting default values for core params
[ KERNEL] [ 2.733986] Using Buffer DMA mode
[ KERNEL] [ 2.733994] Periodic Transfer Interrupt Enhancement - disabled
[ KERNEL] [ 2.733997] Multiprocessor Interrupt Enhancement - disabled
[ KERNEL] [ 2.734004] OTG VER PARAM: 0, OTG VER FLAG: 0
[ KERNEL] [ 2.734033] Dedicated Tx FIFOs mode
[ KERNEL] [ 2.734534] WARN::dwc_otg_hcd_init:1032: FIQ DMA bounce buffers: virt = 0xbad04000 dma = 0xfad04000 len=9024
[ KERNEL] [ 2.734558] FIQ FSM acceleration enabled for :
[ KERNEL] [ 2.734558] Non-periodic Split Transactions
[ KERNEL] [ 2.734558] Periodic Split Transactions
[ KERNEL] [ 2.734558] High-Speed Isochronous Endpoints
[ KERNEL] [ 2.734558] Interrupt/Control Split Transaction hack enabled
[ KERNEL] [ 2.734564] dwc_otg: Microframe scheduler enabled
[ KERNEL] [ 2.734609] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x80397c10
[ KERNEL] [ 2.734618] WARN::hcd_init_fiq:460: FIQ ASM at 0x80397f74 length 36
[ KERNEL] [ 2.734627] WARN::hcd_init_fiq:486: MPHI regs_base at 0xbb925000
[ KERNEL] [ 2.734683] dwc_otg 3f980000.usb: DWC OTG Controller
[ KERNEL] [ 2.734715] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ KERNEL] [ 2.734744] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[ KERNEL] [ 2.734788] Init: Port Power? op_state=1
[ KERNEL] [ 2.734792] Init: Power Port (0)
[ KERNEL] [ 2.734972] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ KERNEL] [ 2.734981] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ KERNEL] [ 2.734989] usb usb1: Product: DWC OTG Controller
[ KERNEL] [ 2.734996] usb usb1: Manufacturer: Linux 4.9.61 dwc_otg_hcd
[ KERNEL] [ 2.735002] usb usb1: SerialNumber: 3f980000.usb
[ KERNEL] [ 2.735725] hub 1-0:1.0: USB hub found
[ KERNEL] [ 2.735759] hub 1-0:1.0: 1 port detected
[ KERNEL] [ 2.736423] dwc_otg: FIQ enabled
[ KERNEL] [ 2.736427] dwc_otg: NAK holdoff enabled
[ KERNEL] [ 2.736431] dwc_otg: FIQ split-transaction FSM enabled
[ KERNEL] [ 2.736444] Module dwc_common_port init
[ KERNEL] [ 2.736785] usbcore: registered new interface driver usbtouchscreen
[ KERNEL] [ 2.738098] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[ KERNEL] [ 2.738573] bcm2835-cpufreq: min=600000 max=1200000
[ KERNEL] [ 2.739546] sdhost-bcm2835 3f202000.sdhost: could not get clk, deferring probe
[ KERNEL] [ 2.742315] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[ KERNEL] [ 2.745406] ledtrig-cpu: registered to indicate activity on CPUs
[ KERNEL] [ 2.745585] hidraw: raw HID events driver (C) Jiri Kosina
[ KERNEL] [ 2.747170] usbcore: registered new interface driver usbhid
[ KERNEL] [ 2.747181] usbhid: USB HID core driver
[ KERNEL] [ 2.750736] vchiq: vchiq_init_state: slot_zero = 0xbad80000, is_master = 0
[ KERNEL] [ 2.762229] [vc_sm_connected_init]: start
[ KERNEL] [ 2.771157] [vc_sm_connected_init]: end - returning 0
[ KERNEL] [ 2.771537] NET: Registered protocol family 17
[ KERNEL] [ 2.771796] Registering SWP/SWPB emulation handler
[ KERNEL] [ 2.772767] registered taskstats version 1
[ KERNEL] [ 2.779941] sdhost: log_buf @ bad07000 (fad07000)
[ KERNEL] [ 2.851966] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ KERNEL] [ 2.854261] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[ KERNEL] [ 2.854269] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[ KERNEL] [ 2.932062] of_cfs_init
[ KERNEL] [ 2.932145] of_cfs_init: OK
[ KERNEL] [ 2.952734] Indeed it is in host mode hprt0 = 00021501
[ KERNEL] [ 2.953604] Freeing unused kernel memory: 4096K
[ KERNEL] [ 3.036840] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ KERNEL] [ 3.038531] mmc0: host does not support reading read-only switch, assuming write-enable
[ KERNEL] [ 3.038689] mmc0: new SD card at address 8fe4
[ KERNEL] [ 3.039415] mmcblk0: mmc0:8fe4 SU02G 1.84 GiB
[ KERNEL] [ 3.040870] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ KERNEL] [ 3.042464] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ KERNEL] [ 3.044065] mmcblk0: p1
[ KERNEL] [ 3.046064] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ KERNEL] [ 3.048023] random: fast init done
[ initrd] [ 3.060734] WTware shell 5.6.20/RPi
[ initrd] [ 3.086185] HDD/MMC/SD boot.
[ KERNEL] [ 3.160291] mmc1: new high speed SDIO card at address 0001
[ KERNEL] [ 3.162017] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ KERNEL] [ 3.162229] Indeed it is in host mode hprt0 = 00001101
[ hotplug] [ 3.206096] Block device 254:0. No action.
[ hotplug] [ 3.345798] Block device 179:0. No action.
[ hotplug] [ 3.345928] Block device 179:1. No action.
[ KERNEL] [ 3.392209] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ KERNEL] [ 3.392221] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ KERNEL] [ 3.392982] hub 1-1:1.0: USB hub found
[ KERNEL] [ 3.393097] hub 1-1:1.0: 5 ports detected
[ KERNEL] [ 3.711962] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ KERNEL] [ 3.842201] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ KERNEL] [ 3.842211] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ KERNEL] [ 4.421965] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[ KERNEL] [ 4.558931] usb 1-1.2: New USB device found, idVendor=062a, idProduct=4101
[ KERNEL] [ 4.558942] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ KERNEL] [ 4.558949] usb 1-1.2: Product: 2.4G Keyboard Mouse
[ KERNEL] [ 4.558956] usb 1-1.2: Manufacturer: MOSART Semi.
[ KERNEL] [ 4.564141] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:062A:4101.0001/input/input0
[ KERNEL] [ 4.634831] hid-generic 0003:062A:4101.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-3f980000.usb-1.2/input0
[ KERNEL] [ 4.644603] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:062A:4101.0002/input/input1
[ KERNEL] [ 4.722745] hid-generic 0003:062A:4101.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-3f980000.usb-1.2/input1
[ initrd] [ 4.996845] Success: media /dev/mmcblk0p1 mounted to /bootmedia.
/--- FILE "/bootmedia/config.txt" -----------------------
| # For more options and information see
| # http://www.raspberrypi.org/documentation/configuration/config-txt.md
| # Some settings may impact device functionality. See link above for details
| # Uncomment if you get no picture on HDMI for a default "safe" mode.
| #hdmi_safe=1
| # Uncomment this if your display has a black border of unused pixels visible
| # and your display can output without overscan.
| disable_overscan=1
| # Uncomment if hdmi display is not detected and composite is being output.
| #hdmi_force_hotplug=1
| # Uncomment to force a specific HDMI mode (this will force VGA).
| #hdmi_group=1
| #hdmi_mode=1
| # Force the monitor to HDMI mode so that sound will be sent over HDMI cable.
| #hdmi_drive=2
| # Uncomment to increase signal to HDMI, if you have interference, blanking, or
| # no display.
| #config_hdmi_boost=4
| # Uncomment to overclock the arm. 700 MHz is the default.
| #arm_freq=800
| disable_splash=1
| #hdmi_group=2
| # 800x600: hdmi_mode=9
| # 1024x768: hdmi_mode=16
| # 1280x1024: hdmi_mode=35
| # 1360x768: hdmi_mode=39
| # 1400x1050: hdmi_mode=42
| # 1440x900: hdmi_mode=47
| # 1600x1200: hdmi_mode=51
| # 1680x1050: hdmi_mode=58
| # 1366x768: hdmi_mode=81
| # 1920x1080: hdmi_mode=82
| # 1920x1200: hdmi_mode=69
| framebuffer_depth=32
| # Uncomment for 16-bit color. It is up to two
| # times faster than default 32-bit.
| #framebuffer_depth=16
| # Enable onboard audio (HDMI or jack).
| dtparam=audio=on
| # Removes the warning overlay.
| #avoid_warnings=1
| # Additionally allows turbo when low-voltage is present.
| #avoid_warnings=2
\----------------------------------------------------
[ initrd] [ 5.004647] WTpassword present: cc72aad3323582f495f9cce9c18dded0.
/--- FILE "/bootmedia/configs/initrd.wtc" -----------------------
| clientIP = *
| config = local
| setupPassword = cc72aad3323582f495f9cce9c18dded0
\----------------------------------------------------
[ initrd] [ 6.999587] Load ethernet drivers.
[ initrd] [ 7.002697] modprobe smsc95xx.
[ KERNEL] [ 7.011836] smsc95xx v1.0.5
[ KERNEL] [ 7.106301] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:6f:c0:a4
[ KERNEL] [ 7.106677] usbcore: registered new interface driver smsc95xx
[ KERNEL] [ 7.213764] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ KERNEL] [ 8.633245] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
[ initrd] [ 8.714880] WTpassword present:
[ initrd] [ 11.010150] dhcp: 576 bytes from 192.168.188.1.
[ initrd] [ 11.010273] 00000000:0000022C0000000000110000C0A8BC01C0A8BC2100430044022C000002010600 ...,..............!.C.D.,......
[ initrd] [ 11.010346] 00000020:67458B6B0000000000000000C0A8BC21C0A8BC0100000000B827EB6FC0A40000 gE.k...........!.........'.o....
[ initrd] [ 11.010417] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 11.010486] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 11.010554] 00000080:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 11.010623] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 11.010691] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 11.010759] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 13.260165] dhcp: 576 bytes from 192.168.188.1.
[ initrd] [ 13.260288] 00000000:0000022C0000000000110000C0A8BC01C0A8BC2100430044022C000002010600 ...,..............!.C.D.,......
[ initrd] [ 13.260362] 00000020:67458B6B0000000000000000C0A8BC21C0A8BC0100000000B827EB6FC0A40000 gE.k...........!.........'.o....
[ initrd] [ 13.260431] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 13.260501] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 13.260568] 00000080:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 13.260638] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 13.260706] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 13.260774] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 13.320088] dhcp: server address 192.168.188.1.
[ initrd] [ 13.320163] dhcp: 192.168.188.33/255.255.255.0.
[ initrd] [ 13.320253] dhcp: default gateway 192.168.188.1.
[ initrd] [ 13.320321] dhcp: DNS 192.168.188.1.
[ initrd] [ 13.320388] dhcp: domain fritz.box.
[ initrd] [ 13.320453] dhcp: TFTP from siaddr 192.168.188.1.
[ initrd] [ 13.320520] dhcp: TFTP 192.168.188.1.
[ initrd] [ 13.320586] No boot file from DHCP.
[ initrd] [ 13.320652] TFTP binary "", configs prefix "", using "/" slash.
WTC listener is active.
WTC broadcast listener is active.
Send broadcast WTCU discover.
[ initrd] [ 13.322255] Run OpenVPN with user config configs/openvpn.cfg.
[ initrd] [ 13.326689] Unpack /bootmedia/packages/pi2-dbus.
[ initrd] [ 13.601065] +--- Executing "/usr/bin/dbus-daemon --system"
[ initrd] [ 13.633536] +- Errorlevel: 0, output:
File is empty.
[ initrd] [ 13.635245] +------------------------
[ initrd] [ 13.635306] Unpack /bootmedia/packages/pi2-xnet.
[ initrd] [ 14.208389] +--- Executing "/sbin/modprobe tun"
[ KERNEL] [ 14.213210] tun: Universal TUN/TAP device driver, 1.6
[ KERNEL] [ 14.213216] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ initrd] [ 14.212835] +- Errorlevel: 0, output:
File is empty.
[ initrd] [ 14.212980] +------------------------
[ initrd] [ 14.213019] +--- Executing "/usr/sbin/openvpn /etc/client.conf"
[SYSLOG] <29>Nov 17 00:00:11 openvpn[650]: OpenVPN 2.4.0 arm-unknown-linux-gnueabihf [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jun 22 2017
[SYSLOG] <29>Nov 17 00:00:11 openvpn[650]: library versions: OpenSSL 1.0.2g 1 Mar 2016, LZO 2.08
[ initrd] [ 14.230340] +- Errorlevel: 0, output:
[SYSLOG] <28>Nov 17 00:00:11 openvpn[651]: WARNING: normally if you use --mssfix and/or --fragment, you should also set --tun-mtu 1500 (currently it is 1400)
File is empty.
[SYSLOG] <29>Nov 17 00:00:11 openvpn[651]: TCP/UDP: Preserving recently used remote address: [AF_INET]84.201.35.24:1194
[SYSLOG] <29>Nov 17 00:00:11 openvpn[651]: Socket Buffers: R=[163840->163840] S=[163840->163840]
[ initrd] [ 14.230554] +------------------------
...
[SYSLOG] <29>Nov 17 00:00:12 openvpn[651]: Initialization Sequence Completed
[ initrd] [ 15.918285] OpenVPN tun0: my IP 10.65.58.22.
[ initrd] [ 15.918550] Run '/sbin/httpd', log '/tmp/httpd.out', env '', pid ''.
[ pfac] [ 15.918981] Run /sbin/httpd.
[ pfac] [ 15.919080] Ok, PID 722.
[ httpd] [ 15.923877] HTTP Server, WTware 5.6.20/RPi
[ initrd] [ 16.041449] USB: 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter.
[ initrd] [ 16.041592] USB: 0424:9514 Standard Microsystems Corp. SMC9514 Hub.
[ initrd] [ 16.041667] USB: 062a:4101 Creative Labs Wireless Keyboard/Mouse.
[ initrd] [ 16.041749] Copy /bootmedia/configs/config.wtc to /tmp/config.wtc.
[ initrd] [ 16.042664] Common local disk config:
/--- FILE "/tmp/config.wtc" -----------------------
| [BOM]
| keyboard = de
| language = de, default
| clipboard = on
| infobox=lshift
...
| turnoffmenu=on
\----------------------------------------------------
/--- FILE "/etc/config.compiled" -----------------------
| [BOM]
| keyboard=de
| language=de, default
| clipboard=on
| infobox=lshift
| video=auto
| turnoffmenu=on
***
| sound=on
| next screen
| connection
| displayName=anderer Server
| server=--new--
\----------------------------------------------------
[ initrd] [ 16.045827] Hostname: "wtwB827EB6FC0A4".
Everyone can control terminal by RSH.
RSH: listener is active.
Send broadcast WTCU discover.
[ httpd] [ 16.314081] Reread settings.
[ httpd] [ 16.314368] Everyone can control terminal by HTTP.
[ gm] [ 16.318509] WTware session manager 5.6.20/RPi.
[ gm] [ 16.320841] Add keyboard event1: MOSART Semi. 2.4G Keyboard Mouse.
[ gm] [ 16.320930] Add keyboard event0: MOSART Semi. 2.4G Keyboard Mouse.
[ gm] [ 16.321074] Display mode: 1024x768, 32 bit, landscape, 0 Hz, modeline "", DDC enabled, connector 0.
[ gm] [ 16.336476] Framebuffer device found.
[ gm] [ 16.336556] LINELENBYTES 4096
[ gm] [ 16.336650] VLEN 3145728
[ gm] [ 16.352831] Use /lib/ui32.so.
[ gm] [ 16.370274] Unpack /bootmedia/packages/pi2-alsa.
[ gm] [ 16.581354] modprobe snd-bcm2835.
[ gm] [ 16.591227] modprobe snd-usb-audio.
/--- FILE "/proc/asound/devices" -----------------------
| 0: [ 0] : control
| 16: [ 0- 0]: digital audio playback
| 17: [ 0- 1]: digital audio playback
| 33: : timer
\----------------------------------------------------
[ KERNEL] [ 16.603082] usbcore: registered new interface driver snd-usb-audio
[ gm] [ 16.602413] /dev/snd/pcmC0D1p character device.
[ gm] [ 16.602471] /dev/snd/pcmC0D0p character device.
[ gm] [ 16.602509] /dev/snd/controlC0 character device.
[ gm] [ 16.602556] /dev/snd/timer character device.
[ gm] [ 16.602594] Preconfigure ALSA.
[ gm] [ 16.602632] Run '/sbin/rdpsnd sndvol 100 100 50', log '', env '', pid ''.
[ gm] [ 16.602669] Run sound daemon.
[ gm] [ 16.602706] Run '/sbin/rdpsnd 1 0 100 0 -1', log '', env '', pid ''.
[ gm] [ 16.602743] Only one RDP session can use sound redirection.
[ gm] [ 16.602780] Turn it off for at display 0 screen 1.
[ gm] [ 16.602817] Only one RDP session can use sound redirection.
[ gm] [ 16.602854] Turn it off for at display 0 screen 2.
[ gm] [ 16.602891] Load usb storage driver.
[ gm] [ 16.602928] modprobe scsi_mod.
[ pfac] [ 16.603307] Run /sbin/rdpsnd sndvol 100 100 50.
[ pfac] [ 16.603372] Ok, PID 751.
[ pfac] [ 16.603419] Run /sbin/rdpsnd 1 0 100 0 -1.
[ pfac] [ 16.603476] Ok, PID 752.
[ sndvol] [ 16.609105] Card 'ALSA'/'bcm2835 ALSA'.
[ sndvol] [ 16.609172] Mixer name: 'Broadcom Mixer'.
[ sndvol] [ 16.609213] Components: ''.
[ sndvol] [ 16.609252] Controls: 6.
[ sndvol] [ 16.609291] ALSA: control 'PCM Playback Volume'.
[ sndvol] [ 16.609330] ALSA: control 'PCM Playback Switch'.
[ sndvol] [ 16.609369] ALSA: control 'PCM Playback Route'.
[ sndvol] [ 16.609408] ALSA: control 'IEC958 Playback Default'.
[ sndvol] [ 16.609447] ALSA: control 'IEC958 Playback Con Mask'.
[ sndvol] [ 16.609486] ALSA: control 'IEC958 Playback PCM Stream'.
[ sndvol] [ 16.609525] Inactive control IEC958 Playback PCM Stream'.
[ pfac] [ 16.615160] Process pid 751 terminated, status 00000000.
[ rdpsnd] [ 16.615250] RDP Sound Redirector, WTware 5.6.20/RPi.
[ rdpsnd] [ 16.618282] Card 'ALSA'/'bcm2835 ALSA'.
[ rdpsnd] [ 16.618361] Mixer name: 'Broadcom Mixer'.
[ rdpsnd] [ 16.618401] Components: ''.
[ rdpsnd] [ 16.618450] Controls: 6.
[ rdpsnd] [ 16.618488] ALSA: control 'PCM Playback Volume'.
[ rdpsnd] [ 16.618528] ALSA: control 'PCM Playback Switch'.
[ rdpsnd] [ 16.618566] ALSA: control 'PCM Playback Route'.
[ rdpsnd] [ 16.618605] ALSA: control 'IEC958 Playback Default'.
[ rdpsnd] [ 16.618644] ALSA: control 'IEC958 Playback Con Mask'.
[ rdpsnd] [ 16.618682] ALSA: control 'IEC958 Playback PCM Stream'.
[ rdpsnd] [ 16.618720] Inactive control IEC958 Playback PCM Stream'.
[ KERNEL] [ 16.621392] SCSI subsystem initialized
[ gm] [ 16.620219] modprobe usb-storage.
[ gm] [ 16.626712] modprobe sd_mod.
[ KERNEL] [ 16.628007] usbcore: registered new interface driver usb-storage
[ gm] [ 16.631868] Load EXFAT filesystem driver.
[ gm] [ 16.631981] modprobe fuse.
[ gm] [ 16.638690] modprobe exfat.
[ KERNEL] [ 16.639454] fuse init (API version 7.26)
[ KERNEL] [ 16.645478] exFAT: Version 1.2.9
[ gm] [ 16.645094] Run '/sbin/rdpdr[usb] 0bda:8153 debug', log '/tmp/rdpdr[usb].out', env '', pid ''.
[ pfac] [ 16.645163] Run /sbin/rdpdr[usb] 0bda:8153 debug.
[ pfac] [ 16.645471] Ok, PID 777.
[rdpdr-usb 0bda:8153] [ 16.647114] RDP USB Redirector, WTware 5.6.20/RPi
[rdpdr-usb 0bda:8153] [ 16.647167] [DEBUG] Open listener at /tmp/rdpdr[usb]_0bda:8153. Main thread 0x76f5d000.
[rdpdr-usb 0bda:8153] [ 16.647209] [DEBUG] Init libusb.
[rdpdr-usb 0bda:8153] [ 16.648388] [DEBUG] Ignore 062a:4101.
[rdpdr-usb 0bda:8153] [ 16.648435] [DEBUG] Ignore 0424:ec00.
[rdpdr-usb 0bda:8153] [ 16.648474] [DEBUG] Ignore 0424:9514.
[rdpdr-usb 0bda:8153] [ 16.648513] [DEBUG] Ignore 1d6b:0002.
[ gm] [ 16.697519] Run '/sbin/resolver 0x18e6cb0 dns [192.168.188.70]', log '', env '', pid ''.
[ pfac] [ 16.697632] Run /sbin/resolver 0x18e6cb0 dns [192.168.188.70].
[ gm] [ 16.697656] Nobody can control terminal by VNC.
[ pfac] [ 16.697962] Ok, PID 779.
[ pfac] [ 16.699963] Process pid 779 terminated, status 00000000.
[ gm] [ 16.703338] Run '/sbin/resolver 0x18e8348 dns [192.168.124.2]', log '', env '', pid ''.
[ pfac] [ 16.703428] Run /sbin/resolver 0x18e8348 dns [192.168.124.2].
[ pfac] [ 16.703606] Ok, PID 780.
[ pfac] [ 16.705721] Process pid 780 terminated, status 00000000.
[ gm] [ 16.709277] Run '/sbin/resolver 0x18e9898 dns [192.168.188.30]', log '', env '', pid ''.
[ pfac] [ 16.709397] Run /sbin/resolver 0x18e9898 dns [192.168.188.30].
[ gm] [ 16.709546] Ask server address.
[ pfac] [ 16.709609] Ok, PID 781.
[ pfac] [ 16.711876] Process pid 781 terminated, status 00000000.
[ gm] [ 16.716318] 192.168.188.70 => 192.168.188.70.
[ gm] [ 16.718311] Free ram before fork terminal client /sbin/rdpclient (session 1): 911808 Kb.
[ gm] [ 16.718354] Run '/sbin/rdpclient 1', log '/tmp/rdpclient.out', env '', pid ''.
[ pfac] [ 16.718394] Run /sbin/rdpclient 1.
[ pfac] [ 16.718562] Ok, PID 782.
[ rdpclient 782] [ 16.722458] RDP Terminal Client, WTware 5.6.20/RPi, pipe 1, pid 782.
[ rdpclient 782] [ 16.723154] Use /lib/ui32.so.
[ rdpclient 782] [ 16.723851] Redirect sound.
[ rdpclient 782] [ 16.723996] Make RDP session with 192.168.188.70, port 3389.
[ rdpclient 782] [ 16.724047] Username: "christianhanshans".
[ rdpclient 782] [ 16.724089] No password.
[ rdpclient 782] [ 16.724129] No PIN.
[ rdpclient 782] [ 16.724168] No domain.
[ rdpclient 782] [ 16.724239] No shell.
[ gm] [ 16.724294] 192.168.124.2 => 192.168.124.2.
[ rdpclient 782] [ 16.724316] No directory.
[ rdpclient 782] [ 16.724357] Window: 1024x768@24.
[ rdpclient 782] [ 16.724398] PFlags 0x0000002F.
[ rdpclient 782] [ 16.724441] Keyboard 00000407:00000000.
[ rdpclient 782] [ 16.724484] My hostname "wtwB827EB6FC0A4".
[ rdpclient 782] [ 16.724526] TCP: connecting to 192.168.188.70:3389.
[ rdpclient 782] [ 16.725522] TCP: connection with 192.168.188.70:3389 established.
[ rdpclient 782] [ 16.725567] Turn keepalive on.
[ rdpclient 782] [ 16.726059] Free ram after buffers allocation: 910728 KB.
[ gm] [ 16.727007] Free ram before fork terminal client /sbin/rdpclient (session 2): 910728 Kb.
[ gm] [ 16.727050] Run '/sbin/rdpclient 2', log '/tmp/rdpclient.out', env '', pid ''.
[ pfac] [ 16.727090] Run /sbin/rdpclient 2.
[ pfac] [ 16.727240] Ok, PID 783.
[ rdpclient 783] [ 16.731276] RDP Terminal Client, WTware 5.6.20/RPi, pipe 2, pid 783.
[ gm] [ 16.732648] 192.168.188.30 => 192.168.188.30.
[ rdpclient 783] [ 16.732719] Use /lib/ui32.so.
[ rdpclient 783] [ 16.732792] Make RDP session with 192.168.124.2, port 3389.
[ rdpclient 783] [ 16.732846] Username: "lobustho".
[ rdpclient 783] [ 16.732903] Password: present.
[ rdpclient 783] [ 16.732957] No PIN.
[ rdpclient 783] [ 16.733021] No domain.
[ rdpclient 783] [ 16.733065] No shell.
[ rdpclient 783] [ 16.733110] No directory.
[ rdpclient 783] [ 16.733152] Window: 1024x768@24.
[ rdpclient 783] [ 16.733194] PFlags 0x0000002F.
[ rdpclient 783] [ 16.733237] Keyboard 00000407:00000000.
[ rdpclient 783] [ 16.733279] My hostname "wtwB827EB6FC0A4".
[ rdpclient 783] [ 16.733322] TCP: connecting to 192.168.124.2:3389.
[ gm] [ 16.734004] Free ram before fork terminal client /sbin/rdpclient (session 3): 910524 Kb.
[ gm] [ 16.734045] Run '/sbin/rdpclient 3', log '/tmp/rdpclient.out', env '', pid ''.
[ pfac] [ 16.734085] Run /sbin/rdpclient 3.
[ pfac] [ 16.734219] Ok, PID 784.
[ rdpclient 784] [ 16.738068] RDP Terminal Client, WTware 5.6.20/RPi, pipe 3, pid 784.
[ rdpclient 784] [ 16.738517] Use /lib/ui32.so.
[ rdpclient 784] [ 16.739195] Make RDP session with 192.168.188.30, port 3389.
[ rdpclient 784] [ 16.739307] Username: "internet".
[ rdpclient 784] [ 16.739352] Password: present.
[ rdpclient 784] [ 16.739395] No PIN.
[ rdpclient 784] [ 16.739438] No domain.
[ rdpclient 784] [ 16.739481] No shell.
[ rdpclient 784] [ 16.739523] No directory.
[ rdpclient 784] [ 16.739566] Window: 1024x768@24.
[ rdpclient 784] [ 16.739608] PFlags 0x0000002F.
[ rdpclient 784] [ 16.739651] Keyboard 00000407:00000000.
[ rdpclient 784] [ 16.739694] My hostname "wtwB827EB6FC0A4".
[ rdpclient 784] [ 16.739737] TCP: connecting to 192.168.188.30:3389.
[ rdpclient 784] [ 16.740987] TCP: connection with 192.168.188.30:3389 established.
[ rdpclient 784] [ 16.741187] Turn keepalive on.
[ rdpclient 784] [ 16.741926] Free ram after buffers allocation: 909608 KB.
[ rdpclient 784] [ 16.742730] No negotiation response.
[ KERNEL] [ 16.744249] random: crng init done
[ rdpclient 784] [ 16.743530] Process RDP server certificate.
[ rdpclient 784] [ 16.743586] RDP4 encryption.
[ rdpclient 783] [ 16.754587] TCP: connection with 192.168.124.2:3389 established.
[ rdpclient 783] [ 16.754683] Turn keepalive on.
[ rdpclient 783] [ 16.755047] Free ram after buffers allocation: 909324 KB.
[ rdpclient 783] [ 16.777490] Reconnect with CredSSP enabled.
[ rdpclient 783] [ 16.777580] TCP: reconnecting to 192.168.124.2:3389.
[ rdpclient 784] [ 16.789787] Enable font smoothing.
[ rdpclient 783] [ 16.799199] TCP: connection with 192.168.124.2:3389 established.
[ rdpclient 783] [ 16.799250] Turn keepalive on.
[ rdpclient 783] [ 16.817710] Server supports GFX Pipeline.
[ rdpclient 783] [ 16.817779] CredSSP.
[ rdpclient 783] [ 16.817822] SSL/TLS.
[ rdpclient 784] [ 16.833772] RDP4 encryption.
[ rdpclient 783] [ 17.212953] Enable font smoothing and Desktop Composition.
[ KERNEL] [ 44.101961] usb 1-1.4: new high-speed USB device number 5 using dwc_otg
[rdpdr-usb 0bda:8153] [ 44.233316] Device connected. USB Id 0bda:8153, bus Id 1-1.4, BUSNUM 1, DEVNUM 5.
[ KERNEL] [ 44.233488] usb 1-1.4: New USB device found, idVendor=0bda, idProduct=8153
[ KERNEL] [ 44.233498] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[ KERNEL] [ 44.233506] usb 1-1.4: Product: USB 10/100/1000 LAN
[ KERNEL] [ 44.233513] usb 1-1.4: Manufacturer: Realtek
[ KERNEL] [ 44.233520] usb 1-1.4: SerialNumber: 000001000000
[ rdpclient 783] [ 52.790258] SSL_ERROR_SYSCALL
[ rdpclient 783] [ 52.790392] TCP/IP connection lost. Network failure?
[ pfac] [ 52.795164] Process pid 783 terminated, status 00000009.
[ gm] [ 52.795239] Final message: TCP/IP connection lost. Network failure?
Home WTware diskless client.
OK, downloaded latest version. When plugging the USB ethernet in, connection to the RPI won't work, so I started without the USB adapter and plugged it in afterwards:
[code]
WTware 5.6.20
WTware 5.6.20/RPi supervisor.
[ KERNEL] [ 0.000000] Booting Linux on physical CPU 0x0
[ KERNEL] [ 0.000000] Linux version 4.9.61 (aka@c12) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #4 SMP Fri Nov 17 04:28:27 +04 2017
[ KERNEL] [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ KERNEL] [ 0.000000] CPU: div instructions available: patching division code
[ KERNEL] [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ KERNEL] [ 0.000000] OF: fdt:Machine model: Raspberry Pi 3 Model B Rev 1.2
[ KERNEL] [ 0.000000] cma: Reserved 8 MiB at 0x3ac00000
[ KERNEL] [ 0.000000] Memory policy: Data cache writealloc
[ KERNEL] [ 0.000000] On node 0 totalpages: 242688
[ KERNEL] [ 0.000000] free_area_init_node: node 0, pgdat 80b22b40, node_mem_map ba3a1000
[ KERNEL] [ 0.000000] Normal zone: 2133 pages used for memmap
[ KERNEL] [ 0.000000] Normal zone: 0 pages reserved
[ KERNEL] [ 0.000000] Normal zone: 242688 pages, LIFO batch:31
[ KERNEL] [ 0.000000] percpu: Embedded 11 pages/cpu @ba367000 s15948 r8192 d20916 u45056
[ KERNEL] [ 0.000000] pcpu-alloc: s15948 r8192 d20916 u45056 alloc=11*4096
[ KERNEL] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ KERNEL] [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 240555
[ KERNEL] [ 0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1024 bcm2708_fb.fbheight=768 bcm2708_fb.fbdepth=32 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 quiet wtboot=mmc
[ KERNEL] [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ KERNEL] [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ KERNEL] [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ KERNEL] [ 0.000000] Memory: 942184K/970752K available (5120K kernel code, 143K rwdata, 920K rodata, 4096K init, 365K bss, 20376K reserved, 8192K cma-reserved)
[ pfac] [ 3.053875] Run /sbin/initrd.
[ KERNEL] [ 0.000000] Virtual kernel memory layout:
[ KERNEL] [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ KERNEL] [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ KERNEL] [ 0.000000] vmalloc : 0xbb800000 - 0xff800000 (1088 MB)
[ KERNEL] [ 0.000000] lowmem : 0x80000000 - 0xbb400000 ( 948 MB)
[ KERNEL] [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
[ KERNEL] [ 0.000000] .text : 0x80008000 - 0x80600000 (6112 kB)
[ KERNEL] [ 0.000000] .init : 0x80700000 - 0x80b00000 (4096 kB)
[ KERNEL] [ 0.000000] .data : 0x80b00000 - 0x80b23df8 ( 144 kB)
[ KERNEL] [ 0.000000] .bss : 0x80b25000 - 0x80b805a0 ( 366 kB)
[ KERNEL] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ KERNEL] [ 0.000000] Hierarchical RCU implementation.
[ KERNEL] [ 0.000000] Build-time adjustment of leaf fanout to 32.
[ KERNEL] [ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ KERNEL] [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys).
[ KERNEL] [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ KERNEL] [ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ KERNEL] [ 0.000017] Switching to timer-based delay loop, resolution 52ns
[ KERNEL] [ 0.000208] Console: colour dummy device 80x30
[ KERNEL] [ 0.000222] console [tty0] enabled
[ KERNEL] [ 0.000238] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ KERNEL] [ 0.000251] pid_max: default: 32768 minimum: 301
[ KERNEL] [ 0.000382] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ KERNEL] [ 0.000389] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ KERNEL] [ 0.001234] Disabling memory control group subsystem
[ KERNEL] [ 0.001286] CPU: Testing write buffer coherency: ok
[ KERNEL] [ 0.001619] CPU0: update cpu_capacity 1024
[ KERNEL] [ 0.001626] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ KERNEL] [ 0.001650] Setting up static identity map for 0x100000 - 0x100034
[ KERNEL] [ 0.003172] CPU1: update cpu_capacity 1024
[ KERNEL] [ 0.003178] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ KERNEL] [ 0.003736] CPU2: update cpu_capacity 1024
[ KERNEL] [ 0.003743] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ KERNEL] [ 0.004297] CPU3: update cpu_capacity 1024
[ pfac] [ 3.055413] Ok, PID 603.
[ KERNEL] [ 0.004304] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ KERNEL] [ 0.004380] Brought up 4 CPUs
[ KERNEL] [ 0.004390] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ KERNEL] [ 0.004394] CPU: All CPU(s) started in HYP mode.
[ KERNEL] [ 0.004397] CPU: Virtualization extensions available.
[ KERNEL] [ 0.004936] devtmpfs: initialized
[ KERNEL] [ 0.014564] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ KERNEL] [ 0.014864] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ KERNEL] [ 0.014881] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ KERNEL] [ 0.015374] pinctrl core: initialized pinctrl subsystem
[ KERNEL] [ 0.015813] NET: Registered protocol family 16
[ KERNEL] [ 0.017659] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ KERNEL] [ 0.027214] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ KERNEL] [ 0.091010] bcm2835-dma 3f007000.dma: DMA legacy API manager at bb80f000, dmachans=0x1
[ KERNEL] [ 0.092743] usbcore: registered new interface driver usbfs
[ KERNEL] [ 0.092823] usbcore: registered new interface driver hub
[ KERNEL] [ 0.092914] usbcore: registered new device driver usb
[ KERNEL] [ 0.100141] raspberrypi-firmware soc:firmware: Attached to firmware from 2017-11-03 17:00
[ KERNEL] [ 0.101931] clocksource: Switched to clocksource arch_sys_counter
[ KERNEL] [ 0.113545] NET: Registered protocol family 2
[ KERNEL] [ 0.114121] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ KERNEL] [ 0.114229] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ KERNEL] [ 0.114413] TCP: Hash tables configured (established 8192 bind 8192)
[ KERNEL] [ 0.114498] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ KERNEL] [ 0.114539] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ KERNEL] [ 0.114713] NET: Registered protocol family 1
[ KERNEL] [ 2.215529] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ KERNEL] [ 2.250062] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ KERNEL] [ 2.250075] io scheduler noop registered
[ KERNEL] [ 2.250080] io scheduler deadline registered (default)
[ KERNEL] [ 2.259569] BCM2708FB: allocated DMA memory fad10000
[ KERNEL] [ 2.259606] BCM2708FB: allocated DMA channel 0 @ bb80f000
[ KERNEL] [ 2.282643] Console: switching to colour frame buffer device 128x48
[ KERNEL] [ 2.297501] bcm2835-rng 3f104000.rng: hwrng registered
[ KERNEL] [ 2.297679] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ KERNEL] [ 2.298488] vc-sm: Videocore shared memory driver
[ KERNEL] [ 2.305342] zram: Added device: zram0
[ KERNEL] [ 2.305387] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ KERNEL] [ 2.533583] Core Release: 2.80a
[ KERNEL] [ 2.533592] Setting default values for core params
[ KERNEL] [ 2.533617] Finished setting default values for core params
[ KERNEL] [ 2.733986] Using Buffer DMA mode
[ KERNEL] [ 2.733994] Periodic Transfer Interrupt Enhancement - disabled
[ KERNEL] [ 2.733997] Multiprocessor Interrupt Enhancement - disabled
[ KERNEL] [ 2.734004] OTG VER PARAM: 0, OTG VER FLAG: 0
[ KERNEL] [ 2.734033] Dedicated Tx FIFOs mode
[ KERNEL] [ 2.734534] WARN::dwc_otg_hcd_init:1032: FIQ DMA bounce buffers: virt = 0xbad04000 dma = 0xfad04000 len=9024
[ KERNEL] [ 2.734558] FIQ FSM acceleration enabled for :
[ KERNEL] [ 2.734558] Non-periodic Split Transactions
[ KERNEL] [ 2.734558] Periodic Split Transactions
[ KERNEL] [ 2.734558] High-Speed Isochronous Endpoints
[ KERNEL] [ 2.734558] Interrupt/Control Split Transaction hack enabled
[ KERNEL] [ 2.734564] dwc_otg: Microframe scheduler enabled
[ KERNEL] [ 2.734609] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x80397c10
[ KERNEL] [ 2.734618] WARN::hcd_init_fiq:460: FIQ ASM at 0x80397f74 length 36
[ KERNEL] [ 2.734627] WARN::hcd_init_fiq:486: MPHI regs_base at 0xbb925000
[ KERNEL] [ 2.734683] dwc_otg 3f980000.usb: DWC OTG Controller
[ KERNEL] [ 2.734715] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ KERNEL] [ 2.734744] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[ KERNEL] [ 2.734788] Init: Port Power? op_state=1
[ KERNEL] [ 2.734792] Init: Power Port (0)
[ KERNEL] [ 2.734972] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ KERNEL] [ 2.734981] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ KERNEL] [ 2.734989] usb usb1: Product: DWC OTG Controller
[ KERNEL] [ 2.734996] usb usb1: Manufacturer: Linux 4.9.61 dwc_otg_hcd
[ KERNEL] [ 2.735002] usb usb1: SerialNumber: 3f980000.usb
[ KERNEL] [ 2.735725] hub 1-0:1.0: USB hub found
[ KERNEL] [ 2.735759] hub 1-0:1.0: 1 port detected
[ KERNEL] [ 2.736423] dwc_otg: FIQ enabled
[ KERNEL] [ 2.736427] dwc_otg: NAK holdoff enabled
[ KERNEL] [ 2.736431] dwc_otg: FIQ split-transaction FSM enabled
[ KERNEL] [ 2.736444] Module dwc_common_port init
[ KERNEL] [ 2.736785] usbcore: registered new interface driver usbtouchscreen
[ KERNEL] [ 2.738098] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[ KERNEL] [ 2.738573] bcm2835-cpufreq: min=600000 max=1200000
[ KERNEL] [ 2.739546] sdhost-bcm2835 3f202000.sdhost: could not get clk, deferring probe
[ KERNEL] [ 2.742315] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[ KERNEL] [ 2.745406] ledtrig-cpu: registered to indicate activity on CPUs
[ KERNEL] [ 2.745585] hidraw: raw HID events driver (C) Jiri Kosina
[ KERNEL] [ 2.747170] usbcore: registered new interface driver usbhid
[ KERNEL] [ 2.747181] usbhid: USB HID core driver
[ KERNEL] [ 2.750736] vchiq: vchiq_init_state: slot_zero = 0xbad80000, is_master = 0
[ KERNEL] [ 2.762229] [vc_sm_connected_init]: start
[ KERNEL] [ 2.771157] [vc_sm_connected_init]: end - returning 0
[ KERNEL] [ 2.771537] NET: Registered protocol family 17
[ KERNEL] [ 2.771796] Registering SWP/SWPB emulation handler
[ KERNEL] [ 2.772767] registered taskstats version 1
[ KERNEL] [ 2.779941] sdhost: log_buf @ bad07000 (fad07000)
[ KERNEL] [ 2.851966] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ KERNEL] [ 2.854261] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[ KERNEL] [ 2.854269] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[ KERNEL] [ 2.932062] of_cfs_init
[ KERNEL] [ 2.932145] of_cfs_init: OK
[ KERNEL] [ 2.952734] Indeed it is in host mode hprt0 = 00021501
[ KERNEL] [ 2.953604] Freeing unused kernel memory: 4096K
[ KERNEL] [ 3.036840] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ KERNEL] [ 3.038531] mmc0: host does not support reading read-only switch, assuming write-enable
[ KERNEL] [ 3.038689] mmc0: new SD card at address 8fe4
[ KERNEL] [ 3.039415] mmcblk0: mmc0:8fe4 SU02G 1.84 GiB
[ KERNEL] [ 3.040870] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ KERNEL] [ 3.042464] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ KERNEL] [ 3.044065] mmcblk0: p1
[ KERNEL] [ 3.046064] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ KERNEL] [ 3.048023] random: fast init done
[ initrd] [ 3.060734] WTware shell 5.6.20/RPi
[ initrd] [ 3.086185] HDD/MMC/SD boot.
[ KERNEL] [ 3.160291] mmc1: new high speed SDIO card at address 0001
[ KERNEL] [ 3.162017] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ KERNEL] [ 3.162229] Indeed it is in host mode hprt0 = 00001101
[ hotplug] [ 3.206096] Block device 254:0. No action.
[ hotplug] [ 3.345798] Block device 179:0. No action.
[ hotplug] [ 3.345928] Block device 179:1. No action.
[ KERNEL] [ 3.392209] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ KERNEL] [ 3.392221] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ KERNEL] [ 3.392982] hub 1-1:1.0: USB hub found
[ KERNEL] [ 3.393097] hub 1-1:1.0: 5 ports detected
[ KERNEL] [ 3.711962] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ KERNEL] [ 3.842201] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ KERNEL] [ 3.842211] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ KERNEL] [ 4.421965] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[ KERNEL] [ 4.558931] usb 1-1.2: New USB device found, idVendor=062a, idProduct=4101
[ KERNEL] [ 4.558942] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ KERNEL] [ 4.558949] usb 1-1.2: Product: 2.4G Keyboard Mouse
[ KERNEL] [ 4.558956] usb 1-1.2: Manufacturer: MOSART Semi.
[ KERNEL] [ 4.564141] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:062A:4101.0001/input/input0
[ KERNEL] [ 4.634831] hid-generic 0003:062A:4101.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-3f980000.usb-1.2/input0
[ KERNEL] [ 4.644603] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:062A:4101.0002/input/input1
[ KERNEL] [ 4.722745] hid-generic 0003:062A:4101.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-3f980000.usb-1.2/input1
[ initrd] [ 4.996845] Success: media /dev/mmcblk0p1 mounted to /bootmedia.
/--- FILE "/bootmedia/config.txt" -----------------------
| # For more options and information see
| # http://www.raspberrypi.org/documentation/configuration/config-txt.md
| # Some settings may impact device functionality. See link above for details
| # Uncomment if you get no picture on HDMI for a default "safe" mode.
| #hdmi_safe=1
| # Uncomment this if your display has a black border of unused pixels visible
| # and your display can output without overscan.
| disable_overscan=1
| # Uncomment if hdmi display is not detected and composite is being output.
| #hdmi_force_hotplug=1
| # Uncomment to force a specific HDMI mode (this will force VGA).
| #hdmi_group=1
| #hdmi_mode=1
| # Force the monitor to HDMI mode so that sound will be sent over HDMI cable.
| #hdmi_drive=2
| # Uncomment to increase signal to HDMI, if you have interference, blanking, or
| # no display.
| #config_hdmi_boost=4
| # Uncomment to overclock the arm. 700 MHz is the default.
| #arm_freq=800
| disable_splash=1
| #hdmi_group=2
| # 800x600: hdmi_mode=9
| # 1024x768: hdmi_mode=16
| # 1280x1024: hdmi_mode=35
| # 1360x768: hdmi_mode=39
| # 1400x1050: hdmi_mode=42
| # 1440x900: hdmi_mode=47
| # 1600x1200: hdmi_mode=51
| # 1680x1050: hdmi_mode=58
| # 1366x768: hdmi_mode=81
| # 1920x1080: hdmi_mode=82
| # 1920x1200: hdmi_mode=69
| framebuffer_depth=32
| # Uncomment for 16-bit color. It is up to two
| # times faster than default 32-bit.
| #framebuffer_depth=16
| # Enable onboard audio (HDMI or jack).
| dtparam=audio=on
| # Removes the warning overlay.
| #avoid_warnings=1
| # Additionally allows turbo when low-voltage is present.
| #avoid_warnings=2
\----------------------------------------------------
[ initrd] [ 5.004647] WTpassword present: cc72aad3323582f495f9cce9c18dded0.
/--- FILE "/bootmedia/configs/initrd.wtc" -----------------------
| clientIP = *
| config = local
| setupPassword = cc72aad3323582f495f9cce9c18dded0
\----------------------------------------------------
[ initrd] [ 6.999587] Load ethernet drivers.
[ initrd] [ 7.002697] modprobe smsc95xx.
[ KERNEL] [ 7.011836] smsc95xx v1.0.5
[ KERNEL] [ 7.106301] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:6f:c0:a4
[ KERNEL] [ 7.106677] usbcore: registered new interface driver smsc95xx
[ KERNEL] [ 7.213764] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ KERNEL] [ 8.633245] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
[ initrd] [ 8.714880] WTpassword present:
[ initrd] [ 11.010150] dhcp: 576 bytes from 192.168.188.1.
[ initrd] [ 11.010273] 00000000:0000022C0000000000110000C0A8BC01C0A8BC2100430044022C000002010600 ...,..............!.C.D.,......
[ initrd] [ 11.010346] 00000020:67458B6B0000000000000000C0A8BC21C0A8BC0100000000B827EB6FC0A40000 gE.k...........!.........'.o....
[ initrd] [ 11.010417] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 11.010486] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 11.010554] 00000080:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 11.010623] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 11.010691] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 11.010759] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 13.260165] dhcp: 576 bytes from 192.168.188.1.
[ initrd] [ 13.260288] 00000000:0000022C0000000000110000C0A8BC01C0A8BC2100430044022C000002010600 ...,..............!.C.D.,......
[ initrd] [ 13.260362] 00000020:67458B6B0000000000000000C0A8BC21C0A8BC0100000000B827EB6FC0A40000 gE.k...........!.........'.o....
[ initrd] [ 13.260431] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 13.260501] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 13.260568] 00000080:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 13.260638] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 13.260706] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 13.260774] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 13.320088] dhcp: server address 192.168.188.1.
[ initrd] [ 13.320163] dhcp: 192.168.188.33/255.255.255.0.
[ initrd] [ 13.320253] dhcp: default gateway 192.168.188.1.
[ initrd] [ 13.320321] dhcp: DNS 192.168.188.1.
[ initrd] [ 13.320388] dhcp: domain fritz.box.
[ initrd] [ 13.320453] dhcp: TFTP from siaddr 192.168.188.1.
[ initrd] [ 13.320520] dhcp: TFTP 192.168.188.1.
[ initrd] [ 13.320586] No boot file from DHCP.
[ initrd] [ 13.320652] TFTP binary "", configs prefix "", using "/" slash.
WTC listener is active.
WTC broadcast listener is active.
Send broadcast WTCU discover.
[ initrd] [ 13.322255] Run OpenVPN with user config configs/openvpn.cfg.
[ initrd] [ 13.326689] Unpack /bootmedia/packages/pi2-dbus.
[ initrd] [ 13.601065] +--- Executing "/usr/bin/dbus-daemon --system"
[ initrd] [ 13.633536] +- Errorlevel: 0, output:
File is empty.
[ initrd] [ 13.635245] +------------------------
[ initrd] [ 13.635306] Unpack /bootmedia/packages/pi2-xnet.
[ initrd] [ 14.208389] +--- Executing "/sbin/modprobe tun"
[ KERNEL] [ 14.213210] tun: Universal TUN/TAP device driver, 1.6
[ KERNEL] [ 14.213216] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ initrd] [ 14.212835] +- Errorlevel: 0, output:
File is empty.
[ initrd] [ 14.212980] +------------------------
[ initrd] [ 14.213019] +--- Executing "/usr/sbin/openvpn /etc/client.conf"
[SYSLOG] <29>Nov 17 00:00:11 openvpn[650]: OpenVPN 2.4.0 arm-unknown-linux-gnueabihf [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jun 22 2017
[SYSLOG] <29>Nov 17 00:00:11 openvpn[650]: library versions: OpenSSL 1.0.2g 1 Mar 2016, LZO 2.08
[ initrd] [ 14.230340] +- Errorlevel: 0, output:
[SYSLOG] <28>Nov 17 00:00:11 openvpn[651]: WARNING: normally if you use --mssfix and/or --fragment, you should also set --tun-mtu 1500 (currently it is 1400)
File is empty.
[SYSLOG] <29>Nov 17 00:00:11 openvpn[651]: TCP/UDP: Preserving recently used remote address: [AF_INET]84.201.35.24:1194
[SYSLOG] <29>Nov 17 00:00:11 openvpn[651]: Socket Buffers: R=[163840->163840] S=[163840->163840]
[ initrd] [ 14.230554] +------------------------
...
[SYSLOG] <29>Nov 17 00:00:12 openvpn[651]: Initialization Sequence Completed
[ initrd] [ 15.918285] OpenVPN tun0: my IP 10.65.58.22.
[ initrd] [ 15.918550] Run '/sbin/httpd', log '/tmp/httpd.out', env '', pid ''.
[ pfac] [ 15.918981] Run /sbin/httpd.
[ pfac] [ 15.919080] Ok, PID 722.
[ httpd] [ 15.923877] HTTP Server, WTware 5.6.20/RPi
[ initrd] [ 16.041449] USB: 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter.
[ initrd] [ 16.041592] USB: 0424:9514 Standard Microsystems Corp. SMC9514 Hub.
[ initrd] [ 16.041667] USB: 062a:4101 Creative Labs Wireless Keyboard/Mouse.
[ initrd] [ 16.041749] Copy /bootmedia/configs/config.wtc to /tmp/config.wtc.
[ initrd] [ 16.042664] Common local disk config:
/--- FILE "/tmp/config.wtc" -----------------------
| [BOM]
| keyboard = de
| language = de, default
| clipboard = on
| infobox=lshift
...
| turnoffmenu=on
\----------------------------------------------------
/--- FILE "/etc/config.compiled" -----------------------
| [BOM]
| keyboard=de
| language=de, default
| clipboard=on
| infobox=lshift
| video=auto
| turnoffmenu=on
***
| sound=on
| next screen
| connection
| displayName=anderer Server
| server=--new--
\----------------------------------------------------
[ initrd] [ 16.045827] Hostname: "wtwB827EB6FC0A4".
Everyone can control terminal by RSH.
RSH: listener is active.
Send broadcast WTCU discover.
[ httpd] [ 16.314081] Reread settings.
[ httpd] [ 16.314368] Everyone can control terminal by HTTP.
[ gm] [ 16.318509] WTware session manager 5.6.20/RPi.
[ gm] [ 16.320841] Add keyboard event1: MOSART Semi. 2.4G Keyboard Mouse.
[ gm] [ 16.320930] Add keyboard event0: MOSART Semi. 2.4G Keyboard Mouse.
[ gm] [ 16.321074] Display mode: 1024x768, 32 bit, landscape, 0 Hz, modeline "", DDC enabled, connector 0.
[ gm] [ 16.336476] Framebuffer device found.
[ gm] [ 16.336556] LINELENBYTES 4096
[ gm] [ 16.336650] VLEN 3145728
[ gm] [ 16.352831] Use /lib/ui32.so.
[ gm] [ 16.370274] Unpack /bootmedia/packages/pi2-alsa.
[ gm] [ 16.581354] modprobe snd-bcm2835.
[ gm] [ 16.591227] modprobe snd-usb-audio.
/--- FILE "/proc/asound/devices" -----------------------
| 0: [ 0] : control
| 16: [ 0- 0]: digital audio playback
| 17: [ 0- 1]: digital audio playback
| 33: : timer
\----------------------------------------------------
[ KERNEL] [ 16.603082] usbcore: registered new interface driver snd-usb-audio
[ gm] [ 16.602413] /dev/snd/pcmC0D1p character device.
[ gm] [ 16.602471] /dev/snd/pcmC0D0p character device.
[ gm] [ 16.602509] /dev/snd/controlC0 character device.
[ gm] [ 16.602556] /dev/snd/timer character device.
[ gm] [ 16.602594] Preconfigure ALSA.
[ gm] [ 16.602632] Run '/sbin/rdpsnd sndvol 100 100 50', log '', env '', pid ''.
[ gm] [ 16.602669] Run sound daemon.
[ gm] [ 16.602706] Run '/sbin/rdpsnd 1 0 100 0 -1', log '', env '', pid ''.
[ gm] [ 16.602743] Only one RDP session can use sound redirection.
[ gm] [ 16.602780] Turn it off for at display 0 screen 1.
[ gm] [ 16.602817] Only one RDP session can use sound redirection.
[ gm] [ 16.602854] Turn it off for at display 0 screen 2.
[ gm] [ 16.602891] Load usb storage driver.
[ gm] [ 16.602928] modprobe scsi_mod.
[ pfac] [ 16.603307] Run /sbin/rdpsnd sndvol 100 100 50.
[ pfac] [ 16.603372] Ok, PID 751.
[ pfac] [ 16.603419] Run /sbin/rdpsnd 1 0 100 0 -1.
[ pfac] [ 16.603476] Ok, PID 752.
[ sndvol] [ 16.609105] Card 'ALSA'/'bcm2835 ALSA'.
[ sndvol] [ 16.609172] Mixer name: 'Broadcom Mixer'.
[ sndvol] [ 16.609213] Components: ''.
[ sndvol] [ 16.609252] Controls: 6.
[ sndvol] [ 16.609291] ALSA: control 'PCM Playback Volume'.
[ sndvol] [ 16.609330] ALSA: control 'PCM Playback Switch'.
[ sndvol] [ 16.609369] ALSA: control 'PCM Playback Route'.
[ sndvol] [ 16.609408] ALSA: control 'IEC958 Playback Default'.
[ sndvol] [ 16.609447] ALSA: control 'IEC958 Playback Con Mask'.
[ sndvol] [ 16.609486] ALSA: control 'IEC958 Playback PCM Stream'.
[ sndvol] [ 16.609525] Inactive control IEC958 Playback PCM Stream'.
[ pfac] [ 16.615160] Process pid 751 terminated, status 00000000.
[ rdpsnd] [ 16.615250] RDP Sound Redirector, WTware 5.6.20/RPi.
[ rdpsnd] [ 16.618282] Card 'ALSA'/'bcm2835 ALSA'.
[ rdpsnd] [ 16.618361] Mixer name: 'Broadcom Mixer'.
[ rdpsnd] [ 16.618401] Components: ''.
[ rdpsnd] [ 16.618450] Controls: 6.
[ rdpsnd] [ 16.618488] ALSA: control 'PCM Playback Volume'.
[ rdpsnd] [ 16.618528] ALSA: control 'PCM Playback Switch'.
[ rdpsnd] [ 16.618566] ALSA: control 'PCM Playback Route'.
[ rdpsnd] [ 16.618605] ALSA: control 'IEC958 Playback Default'.
[ rdpsnd] [ 16.618644] ALSA: control 'IEC958 Playback Con Mask'.
[ rdpsnd] [ 16.618682] ALSA: control 'IEC958 Playback PCM Stream'.
[ rdpsnd] [ 16.618720] Inactive control IEC958 Playback PCM Stream'.
[ KERNEL] [ 16.621392] SCSI subsystem initialized
[ gm] [ 16.620219] modprobe usb-storage.
[ gm] [ 16.626712] modprobe sd_mod.
[ KERNEL] [ 16.628007] usbcore: registered new interface driver usb-storage
[ gm] [ 16.631868] Load EXFAT filesystem driver.
[ gm] [ 16.631981] modprobe fuse.
[ gm] [ 16.638690] modprobe exfat.
[ KERNEL] [ 16.639454] fuse init (API version 7.26)
[ KERNEL] [ 16.645478] exFAT: Version 1.2.9
[ gm] [ 16.645094] Run '/sbin/rdpdr[usb] 0bda:8153 debug', log '/tmp/rdpdr[usb].out', env '', pid ''.
[ pfac] [ 16.645163] Run /sbin/rdpdr[usb] 0bda:8153 debug.
[ pfac] [ 16.645471] Ok, PID 777.
[rdpdr-usb 0bda:8153] [ 16.647114] RDP USB Redirector, WTware 5.6.20/RPi
[rdpdr-usb 0bda:8153] [ 16.647167] [DEBUG] Open listener at /tmp/rdpdr[usb]_0bda:8153. Main thread 0x76f5d000.
[rdpdr-usb 0bda:8153] [ 16.647209] [DEBUG] Init libusb.
[rdpdr-usb 0bda:8153] [ 16.648388] [DEBUG] Ignore 062a:4101.
[rdpdr-usb 0bda:8153] [ 16.648435] [DEBUG] Ignore 0424:ec00.
[rdpdr-usb 0bda:8153] [ 16.648474] [DEBUG] Ignore 0424:9514.
[rdpdr-usb 0bda:8153] [ 16.648513] [DEBUG] Ignore 1d6b:0002.
[ gm] [ 16.697519] Run '/sbin/resolver 0x18e6cb0 dns [192.168.188.70]', log '', env '', pid ''.
[ pfac] [ 16.697632] Run /sbin/resolver 0x18e6cb0 dns [192.168.188.70].
[ gm] [ 16.697656] Nobody can control terminal by VNC.
[ pfac] [ 16.697962] Ok, PID 779.
[ pfac] [ 16.699963] Process pid 779 terminated, status 00000000.
[ gm] [ 16.703338] Run '/sbin/resolver 0x18e8348 dns [192.168.124.2]', log '', env '', pid ''.
[ pfac] [ 16.703428] Run /sbin/resolver 0x18e8348 dns [192.168.124.2].
[ pfac] [ 16.703606] Ok, PID 780.
[ pfac] [ 16.705721] Process pid 780 terminated, status 00000000.
[ gm] [ 16.709277] Run '/sbin/resolver 0x18e9898 dns [192.168.188.30]', log '', env '', pid ''.
[ pfac] [ 16.709397] Run /sbin/resolver 0x18e9898 dns [192.168.188.30].
[ gm] [ 16.709546] Ask server address.
[ pfac] [ 16.709609] Ok, PID 781.
[ pfac] [ 16.711876] Process pid 781 terminated, status 00000000.
[ gm] [ 16.716318] 192.168.188.70 => 192.168.188.70.
[ gm] [ 16.718311] Free ram before fork terminal client /sbin/rdpclient (session 1): 911808 Kb.
[ gm] [ 16.718354] Run '/sbin/rdpclient 1', log '/tmp/rdpclient.out', env '', pid ''.
[ pfac] [ 16.718394] Run /sbin/rdpclient 1.
[ pfac] [ 16.718562] Ok, PID 782.
[ rdpclient 782] [ 16.722458] RDP Terminal Client, WTware 5.6.20/RPi, pipe 1, pid 782.
[ rdpclient 782] [ 16.723154] Use /lib/ui32.so.
[ rdpclient 782] [ 16.723851] Redirect sound.
[ rdpclient 782] [ 16.723996] Make RDP session with 192.168.188.70, port 3389.
[ rdpclient 782] [ 16.724047] Username: "christianhanshans".
[ rdpclient 782] [ 16.724089] No password.
[ rdpclient 782] [ 16.724129] No PIN.
[ rdpclient 782] [ 16.724168] No domain.
[ rdpclient 782] [ 16.724239] No shell.
[ gm] [ 16.724294] 192.168.124.2 => 192.168.124.2.
[ rdpclient 782] [ 16.724316] No directory.
[ rdpclient 782] [ 16.724357] Window: 1024x768@24.
[ rdpclient 782] [ 16.724398] PFlags 0x0000002F.
[ rdpclient 782] [ 16.724441] Keyboard 00000407:00000000.
[ rdpclient 782] [ 16.724484] My hostname "wtwB827EB6FC0A4".
[ rdpclient 782] [ 16.724526] TCP: connecting to 192.168.188.70:3389.
[ rdpclient 782] [ 16.725522] TCP: connection with 192.168.188.70:3389 established.
[ rdpclient 782] [ 16.725567] Turn keepalive on.
[ rdpclient 782] [ 16.726059] Free ram after buffers allocation: 910728 KB.
[ gm] [ 16.727007] Free ram before fork terminal client /sbin/rdpclient (session 2): 910728 Kb.
[ gm] [ 16.727050] Run '/sbin/rdpclient 2', log '/tmp/rdpclient.out', env '', pid ''.
[ pfac] [ 16.727090] Run /sbin/rdpclient 2.
[ pfac] [ 16.727240] Ok, PID 783.
[ rdpclient 783] [ 16.731276] RDP Terminal Client, WTware 5.6.20/RPi, pipe 2, pid 783.
[ gm] [ 16.732648] 192.168.188.30 => 192.168.188.30.
[ rdpclient 783] [ 16.732719] Use /lib/ui32.so.
[ rdpclient 783] [ 16.732792] Make RDP session with 192.168.124.2, port 3389.
[ rdpclient 783] [ 16.732846] Username: "lobustho".
[ rdpclient 783] [ 16.732903] Password: present.
[ rdpclient 783] [ 16.732957] No PIN.
[ rdpclient 783] [ 16.733021] No domain.
[ rdpclient 783] [ 16.733065] No shell.
[ rdpclient 783] [ 16.733110] No directory.
[ rdpclient 783] [ 16.733152] Window: 1024x768@24.
[ rdpclient 783] [ 16.733194] PFlags 0x0000002F.
[ rdpclient 783] [ 16.733237] Keyboard 00000407:00000000.
[ rdpclient 783] [ 16.733279] My hostname "wtwB827EB6FC0A4".
[ rdpclient 783] [ 16.733322] TCP: connecting to 192.168.124.2:3389.
[ gm] [ 16.734004] Free ram before fork terminal client /sbin/rdpclient (session 3): 910524 Kb.
[ gm] [ 16.734045] Run '/sbin/rdpclient 3', log '/tmp/rdpclient.out', env '', pid ''.
[ pfac] [ 16.734085] Run /sbin/rdpclient 3.
[ pfac] [ 16.734219] Ok, PID 784.
[ rdpclient 784] [ 16.738068] RDP Terminal Client, WTware 5.6.20/RPi, pipe 3, pid 784.
[ rdpclient 784] [ 16.738517] Use /lib/ui32.so.
[ rdpclient 784] [ 16.739195] Make RDP session with 192.168.188.30, port 3389.
[ rdpclient 784] [ 16.739307] Username: "internet".
[ rdpclient 784] [ 16.739352] Password: present.
[ rdpclient 784] [ 16.739395] No PIN.
[ rdpclient 784] [ 16.739438] No domain.
[ rdpclient 784] [ 16.739481] No shell.
[ rdpclient 784] [ 16.739523] No directory.
[ rdpclient 784] [ 16.739566] Window: 1024x768@24.
[ rdpclient 784] [ 16.739608] PFlags 0x0000002F.
[ rdpclient 784] [ 16.739651] Keyboard 00000407:00000000.
[ rdpclient 784] [ 16.739694] My hostname "wtwB827EB6FC0A4".
[ rdpclient 784] [ 16.739737] TCP: connecting to 192.168.188.30:3389.
[ rdpclient 784] [ 16.740987] TCP: connection with 192.168.188.30:3389 established.
[ rdpclient 784] [ 16.741187] Turn keepalive on.
[ rdpclient 784] [ 16.741926] Free ram after buffers allocation: 909608 KB.
[ rdpclient 784] [ 16.742730] No negotiation response.
[ KERNEL] [ 16.744249] random: crng init done
[ rdpclient 784] [ 16.743530] Process RDP server certificate.
[ rdpclient 784] [ 16.743586] RDP4 encryption.
[ rdpclient 783] [ 16.754587] TCP: connection with 192.168.124.2:3389 established.
[ rdpclient 783] [ 16.754683] Turn keepalive on.
[ rdpclient 783] [ 16.755047] Free ram after buffers allocation: 909324 KB.
[ rdpclient 783] [ 16.777490] Reconnect with CredSSP enabled.
[ rdpclient 783] [ 16.777580] TCP: reconnecting to 192.168.124.2:3389.
[ rdpclient 784] [ 16.789787] Enable font smoothing.
[ rdpclient 783] [ 16.799199] TCP: connection with 192.168.124.2:3389 established.
[ rdpclient 783] [ 16.799250] Turn keepalive on.
[ rdpclient 783] [ 16.817710] Server supports GFX Pipeline.
[ rdpclient 783] [ 16.817779] CredSSP.
[ rdpclient 783] [ 16.817822] SSL/TLS.
[ rdpclient 784] [ 16.833772] RDP4 encryption.
[ rdpclient 783] [ 17.212953] Enable font smoothing and Desktop Composition.
[ KERNEL] [ 44.101961] usb 1-1.4: new high-speed USB device number 5 using dwc_otg
[rdpdr-usb 0bda:8153] [ 44.233316] Device connected. USB Id 0bda:8153, bus Id 1-1.4, BUSNUM 1, DEVNUM 5.
[ KERNEL] [ 44.233488] usb 1-1.4: New USB device found, idVendor=0bda, idProduct=8153
[ KERNEL] [ 44.233498] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[ KERNEL] [ 44.233506] usb 1-1.4: Product: USB 10/100/1000 LAN
[ KERNEL] [ 44.233513] usb 1-1.4: Manufacturer: Realtek
[ KERNEL] [ 44.233520] usb 1-1.4: SerialNumber: 000001000000
[ rdpclient 783] [ 52.790258] SSL_ERROR_SYSCALL
[ rdpclient 783] [ 52.790392] TCP/IP connection lost. Network failure?
[ pfac] [ 52.795164] Process pid 783 terminated, status 00000009.
[ gm] [ 52.795239] Final message: TCP/IP connection lost. Network failure?
Home WTware diskless client.[/code]