by Raver » Tue Oct 24, 2023 7:31 pm
I put everything away, I left it alone, but without result, it's still the same. I am attaching logs
Code: Select all
WTware v.6.0.46/RPi
WTware 6.0.46/RPi supervisor.
[ KERNEL] [ 0.000000] Booting Linux on physical CPU 0x0
[ KERNEL] [ 0.000000] Linux version 5.10.25-v7l (aka@c22) (arm-linux-gnueabihf-gcc (Debian 8.3.0-2) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #11 SMP Wed Apr 7 14:31:15 UTC 2021
[ KERNEL] [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d
[ KERNEL] [ 0.000000] CPU: div instructions available: patching division code
[ KERNEL] [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ KERNEL] [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.1
[ KERNEL] [ 0.000000] Memory policy: Data cache writealloc
[ KERNEL] [ 0.000000] Reserved memory: created CMA memory pool at 0x000000002ac00000, size 64 MiB
[ KERNEL] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ KERNEL] [ 0.000000] Zone ranges:
[ KERNEL] [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
[ KERNEL] [ 0.000000] Normal empty
[ KERNEL] [ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff]
[ KERNEL] [ 0.000000] Movable zone start for each node
[ KERNEL] [ 0.000000] Early memory node ranges
[ KERNEL] [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
[ KERNEL] [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff]
[ KERNEL] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[ KERNEL] [ 0.000000] On node 0 totalpages: 504832
[ KERNEL] [ 0.000000] DMA zone: 1920 pages used for memmap
[ KERNEL] [ 0.000000] DMA zone: 0 pages reserved
[ KERNEL] [ 0.000000] DMA zone: 196608 pages, LIFO batch:63
[ KERNEL] [ 0.000000] HighMem zone: 308224 pages, LIFO batch:63
[ KERNEL] [ 0.000000] percpu: Embedded 15 pages/cpu s29580 r8192 d23668 u61440
[ KERNEL] [ 0.000000] pcpu-alloc: s29580 r8192 d23668 u61440 alloc=15*4096
[ KERNEL] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ KERNEL] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 502912
[ KERNEL] [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbdepth=32 bcm2708_fb.fbswap=1 smsc95xx.macaddr=DC:A6:32:57:52:6A vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 hide_setup dwc_otg.lpm_enable=0 quiet wtboot=mmc
[ KERNEL] [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ KERNEL] [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ KERNEL] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ KERNEL] [ 0.000000] software IO TLB: mapped [mem 0x0000000025800000-0x0000000029800000] (64MB)
[ KERNEL] [ 0.000000] Memory: 1855584K/2019328K available (6144K kernel code, 580K rwdata, 812K rodata, 2048K init, 378K bss, 98208K reserved, 65536K cma-reserved, 1232896K highmem)
[ KERNEL] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ KERNEL] [ 0.000000] rcu: Hierarchical RCU implementation.
[ KERNEL] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ KERNEL] [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ KERNEL] [ 0.000000] GIC: Using split EOI/Deactivate mode
[ KERNEL] [ 0.000000] random: get_random_bytes called from 0xc0a00bdc with crng_init=0
[ KERNEL] [ 0.000007] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[ KERNEL] [ 0.000023] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[ KERNEL] [ 0.000074] bcm2835: system timer (irq = 25)
[ KERNEL] [ 0.000630] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ KERNEL] [ 0.000647] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ KERNEL] [ 0.000664] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ KERNEL] [ 0.000677] Switching to timer-based delay loop, resolution 18ns
[ KERNEL] [ 0.000852] Console: colour dummy device 80x30
[ KERNEL] [ 0.000899] printk: console [tty0] enabled
[ KERNEL] [ 0.000935] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000)
[ KERNEL] [ 0.000954] pid_max: default: 32768 minimum: 301
[ KERNEL] [ 0.001087] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ KERNEL] [ 0.001102] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ KERNEL] [ 0.001611] CPU: Testing write buffer coherency: ok
[ KERNEL] [ 0.001819] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ KERNEL] [ 0.002181] Setting up static identity map for 0x200000 - 0x20003c
[ KERNEL] [ 0.002257] rcu: Hierarchical SRCU implementation.
[ KERNEL] [ 0.002511] smp: Bringing up secondary CPUs ...
[ KERNEL] [ 0.003062] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ KERNEL] [ 0.003685] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ KERNEL] [ 0.004294] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ KERNEL] [ 0.004382] smp: Brought up 1 node, 4 CPUs
[ KERNEL] [ 0.004394] SMP: Total of 4 processors activated (432.00 BogoMIPS).
[ KERNEL] [ 0.004403] CPU: All CPU(s) started in HYP mode.
[ KERNEL] [ 0.004410] CPU: Virtualization extensions available.
[ KERNEL] [ 0.004777] devtmpfs: initialized
[ KERNEL] [ 0.013785] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0
[ KERNEL] [ 0.014053] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ KERNEL] [ 0.014072] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ KERNEL] [ 0.015492] pinctrl core: initialized pinctrl subsystem
[ KERNEL] [ 0.016494] NET: Registered protocol family 16
[ KERNEL] [ 0.018258] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ KERNEL] [ 0.019824] thermal_sys: Registered thermal governor 'step_wise'
[ KERNEL] [ 0.020599] Serial: AMBA PL011 UART driver
[ KERNEL] [ 0.037693] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ KERNEL] [ 0.050640] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-03-26T16:33:26, variant start
[ KERNEL] [ 0.060655] raspberrypi-firmware soc:firmware: Firmware hash is edf2e9c318863999c97c50cdb74eee235ede3af5
[ KERNEL] [ 0.099862] cryptd: max_cpu_qlen set to 1000
[ KERNEL] [ 0.101801] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
[ KERNEL] [ 0.104779] vgaarb: loaded
[ KERNEL] [ 0.105270] usbcore: registered new interface driver usbfs
[ KERNEL] [ 0.105366] usbcore: registered new interface driver hub
[ KERNEL] [ 0.105415] usbcore: registered new device driver usb
[ KERNEL] [ 0.106895] clocksource: Switched to clocksource arch_sys_counter
[ KERNEL] [ 0.117956] NET: Registered protocol family 2
[ KERNEL] [ 0.118495] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ KERNEL] [ 0.118515] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ KERNEL] [ 0.118570] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ KERNEL] [ 0.118630] TCP: Hash tables configured (established 8192 bind 8192)
[ KERNEL] [ 0.118727] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ KERNEL] [ 0.118754] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ KERNEL] [ 0.118885] NET: Registered protocol family 1
[ KERNEL] [ 0.118911] PCI: CLS 0 bytes, default 64
[ KERNEL] [ 0.851334] Initialise system trusted keyrings
[ KERNEL] [ 0.856963] workingset: timestamp_bits=30 max_order=19 bucket_order=0
[ KERNEL] [ 0.967686] Key type asymmetric registered
[ KERNEL] [ 0.967697] Asymmetric key parser 'x509' registered
[ KERNEL] [ 0.967753] bounce: pool size: 64 pages
[ KERNEL] [ 0.967798] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ KERNEL] [ 0.969932] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ KERNEL] [ 0.969952] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[ KERNEL] [ 0.969984] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000
[ KERNEL] [ 0.970017] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x007fffffff -> 0x0400000000
[ KERNEL] [ 1.028985] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[ KERNEL] [ 1.029212] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ KERNEL] [ 1.029227] pci_bus 0000:00: root bus resource [bus 00-ff]
[ KERNEL] [ 1.029241] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
[ KERNEL] [ 1.029287] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ KERNEL] [ 1.029378] pci 0000:00:00.0: PME# supported from D0 D3hot
[ KERNEL] [ 1.032276] PCI: bus0: Fast back to back transfers disabled
[ KERNEL] [ 1.032291] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ KERNEL] [ 1.032514] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[ KERNEL] [ 1.032599] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ KERNEL] [ 1.032852] pci 0000:01:00.0: PME# supported from D0 D3cold
[ KERNEL] [ 1.035698] PCI: bus1: Fast back to back transfers disabled
[ KERNEL] [ 1.035715] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ KERNEL] [ 1.035744] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[ KERNEL] [ 1.035760] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[ KERNEL] [ 1.035816] pci 0000:00:00.0: PCI bridge to [bus 01]
[ KERNEL] [ 1.035829] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
[ KERNEL] [ 1.036017] pcieport 0000:00:00.0: enabling device (0140 -> 0142)
[ KERNEL] [ 1.036152] pcieport 0000:00:00.0: PME: Signaling with IRQ 61
[ KERNEL] [ 1.036724] bcm2708_fb soc:fb: FB found 1 display(s)
[ KERNEL] [ 1.067336] Console: switching to colour frame buffer device 240x67
[ KERNEL] [ 1.077594] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1920x1080
[ KERNEL] [ 1.080128] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ KERNEL] [ 1.080838] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default
[ KERNEL] [ 1.081753] iproc-rng200 fe104000.rng: hwrng registered
[ KERNEL] [ 1.081930] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ KERNEL] [ 1.082529] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[ KERNEL] [ 1.082993] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000
[ KERNEL] [ 1.083274] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000
[ KERNEL] [ 1.083482] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000
[ KERNEL] [ 1.083695] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000
[ KERNEL] [ 1.086618] zram: Added device: zram0
[ KERNEL] [ 1.088862] libphy: Fixed MDIO Bus: probed
[ KERNEL] [ 1.142805] xhci_hcd 0000:01:00.0: enabling device (0140 -> 0142)
[ KERNEL] [ 1.142930] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ KERNEL] [ 1.142964] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ KERNEL] [ 1.144430] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000060000000890
[ KERNEL] [ 1.144871] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ KERNEL] [ 1.144884] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ KERNEL] [ 1.144894] usb usb1: Product: xHCI Host Controller
[ KERNEL] [ 1.144904] usb usb1: Manufacturer: Linux 5.10.25-v7l xhci-hcd
[ KERNEL] [ 1.144914] usb usb1: SerialNumber: 0000:01:00.0
[ KERNEL] [ 1.145394] hub 1-0:1.0: USB hub found
[ KERNEL] [ 1.145457] hub 1-0:1.0: 1 port detected
[ KERNEL] [ 1.145994] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ KERNEL] [ 1.146016] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ KERNEL] [ 1.146041] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ KERNEL] [ 1.146300] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[ KERNEL] [ 1.146314] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ KERNEL] [ 1.146325] usb usb2: Product: xHCI Host Controller
[ KERNEL] [ 1.146347] usb usb2: Manufacturer: Linux 5.10.25-v7l xhci-hcd
[ KERNEL] [ 1.146365] usb usb2: SerialNumber: 0000:01:00.0
[ KERNEL] [ 1.146816] hub 2-0:1.0: USB hub found
[ KERNEL] [ 1.146861] hub 2-0:1.0: 4 ports detected
[ KERNEL] [ 1.147926] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ KERNEL] [ 1.148031] dwc_otg: FIQ enabled
[ KERNEL] [ 1.148039] dwc_otg: NAK holdoff enabled
[ KERNEL] [ 1.148047] dwc_otg: FIQ split-transaction FSM enabled
[ KERNEL] [ 1.148058] Module dwc_common_port init
[ KERNEL] [ 1.151883] usbcore: registered new interface driver usbtouchscreen
[ KERNEL] [ 1.153225] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ KERNEL] [ 1.154291] sdhci: Secure Digital Host Controller Interface driver
[ KERNEL] [ 1.154301] sdhci: Copyright(c) Pierre Ossman
[ KERNEL] [ 1.154697] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
[ KERNEL] [ 1.154942] sdhci-pltfm: SDHCI platform and OF driver helper
[ KERNEL] [ 1.155158] hid: raw HID events driver (C) Jiri Kosina
[ KERNEL] [ 1.155786] usbcore: registered new interface driver usbhid
[ KERNEL] [ 1.155790] usbhid: USB HID core driver
[ KERNEL] [ 1.168966] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ KERNEL] [ 1.168976] [vc_sm_connected_init]: start
[ KERNEL] [ 1.174700] [vc_sm_connected_init]: installed successfully
[ KERNEL] [ 1.174917] NET: Registered protocol family 17
[ KERNEL] [ 1.175069] Registering SWP/SWPB emulation handler
[ KERNEL] [ 1.175599] Loading compiled-in X.509 certificates
[ KERNEL] [ 1.176798] uart-pl011 fe201000.serial: there is not valid maps for state default
[ KERNEL] [ 1.176870] uart-pl011 fe201000.serial: cts_event_workaround enabled
[ KERNEL] [ 1.176926] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 36, base_baud = 0) is a PL011 rev2
[ KERNEL] [ 1.180917] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default
[ KERNEL] [ 1.181159] fe215040.serial: ttyS0 at MMIO 0xfe215040 (irq = 37, base_baud = 62500000) is a 16550
[ KERNEL] [ 1.181456] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ KERNEL] [ 1.181729] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ KERNEL] [ 1.181733] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[ KERNEL] [ 1.208483] of_cfs_init
[ KERNEL] [ 1.208600] of_cfs_init: OK
[ KERNEL] [ 1.224434] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ KERNEL] [ 1.225934] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ KERNEL] [ 1.227435] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ KERNEL] [ 1.230129] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ KERNEL] [ 1.231628] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ KERNEL] [ 1.247046] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
[ KERNEL] [ 1.249766] Freeing unused kernel memory: 2048K
[ KERNEL] [ 1.265543] random: fast init done
[ KERNEL] [ 1.290167] mmc1: new high speed SDIO card at address 0001
[ KERNEL] [ 1.298801] mmc0: new high speed SDHC card at address aaaa
[ KERNEL] [ 1.299364] mmcblk0: mmc0:aaaa SU04G 3.69 GiB
[ KERNEL] [ 1.300617] mmcblk0: p1
[ KERNEL] [ 1.317044] Run /init as init process
[ KERNEL] [ 1.317051] with arguments:
[ KERNEL] [ 1.317057] /init
[ KERNEL] [ 1.317063] hide_setup
[ KERNEL] [ 1.317068] with environment:
[ KERNEL] [ 1.317074] HOME=/
[ KERNEL] [ 1.317080] TERM=linux
[ KERNEL] [ 1.317085] wtboot=mmc
[ KERNEL] [ 1.526929] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ pfac] [ 1.627047] Run /sbin/initrd.
[ pfac] [ 1.627281] Ok, PID 805.
[ initrd] [ 1.631332] WTware 6.0.46/RPi shell.
[ initrd] [ 1.631684] Load font 'ter-c32b.psf', console 120x33.
[ initrd] [ 1.646182] HDD/MMC/SD boot.
[ initrd] [ 1.646258] No device '/dev/fb1'.
[ initrd] [ 1.699487] Success: /dev/mmcblk0p1 mounted to /bootmedia.
/--- FILE "/bootmedia/config.txt" -----------------------
| # For more options and information see:
| #
| # https://www.raspberrypi.org/documentation/configuration/config-txt/README.md
| #
| # Some settings may impact device functionality. See link above for details.
| # Uncomment if you get no picture on HDMI for a default "safe" mode.
| #hdmi_safe=1
| # Uncomment this if your display has a black border of unused pixels visible
| # and your display can output without overscan.
| disable_overscan=1
| # Uncomment if hdmi display is not detected and composite is being output.
| #hdmi_force_hotplug=1
| # Uncomment to force a specific HDMI mode (this will force VGA).
| #hdmi_group=1
| #hdmi_mode=1
| # Force the monitor to HDMI mode so that sound will be sent over HDMI cable.
| #hdmi_drive=2
| # Uncomment to increase signal to HDMI, if you have interference, blanking, or
| # no display.
| #config_hdmi_boost=4
| # Uncomment to overclock the arm. 700 MHz is the default.
| #arm_freq=800
| disable_splash=1
| enable_uart=1
| framebuffer_depth=32
| # Uncomment for 16-bit color.
| #framebuffer_depth=16
| # Enable onboard audio (HDMI or jack).
| dtparam=audio=on
| # Removes the warning overlay.
| #avoid_warnings=1
| # Additionally allows turbo when low-voltage is present.
| #avoid_warnings=2
| [pi4]
| max_framebuffers=2
| [all]
| # Uncomment these two lines to set display resolution:
| #hdmi_group=2
| #hdmi_mode=58
| #
| # Specify correct value in hdmi_mode= line from the list of valid values:
| # 800x600: hdmi_mode=9
| # 1024x768: hdmi_mode=16
| # 1280x1024: hdmi_mode=35
| # 1360x768: hdmi_mode=39
| # 1400x1050: hdmi_mode=42
| # 1440x900: hdmi_mode=47
| # 1600x1200: hdmi_mode=51
| # 1680x1050: hdmi_mode=58
| # 1366x768: hdmi_mode=81
| # 1920x1080: hdmi_mode=82
| # 1920x1200: hdmi_mode=69
| #
| # Find more resolutions in manual:
| # https://www.raspberrypi.org/documentation/configuration/config-txt/video.md
| #
| # Uncomment six lines with such syntax and right hdmi_mode= values for
| # dual displays on Raspberry Pi 4:
| #
| #[HDMI:0]
| # hdmi_group=2
| # hdmi_mode=42
| #[HDMI:1]
| # hdmi_group=2
| # hdmi_mode=58
\----------------------------------------------------
[ KERNEL] [ 1.709547] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[ KERNEL] [ 1.709560] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ KERNEL] [ 1.709571] usb 1-1: Product: USB2.0 Hub
[ initrd] [ 1.706045] Copy /bootmedia/configs/wait.png to /tmp/wait.png.
[ KERNEL] [ 1.711094] hub 1-1:1.0: USB hub found
[ KERNEL] [ 1.711430] hub 1-1:1.0: 4 ports detected
[ initrd] [ 1.746128] /bootmedia/configs/wait.png -> /tmp/wait.png, 880250 bytes copied.
[ initrd] [ 1.746237] Use configs/wait.png.
[ initrd] [ 1.746313] Screen 1920x1080 32 color bits, LINELENBYTES 7680, VLEN 8294400.
[ KERNEL] [ 2.036953] usb 1-1.1: new high-speed USB device number 3 using xhci_hcd
[ KERNEL] [ 2.167734] usb 1-1.1: New USB device found, idVendor=1224, idProduct=2a25, bcdDevice= 1.00
[ KERNEL] [ 2.167748] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ KERNEL] [ 2.167759] usb 1-1.1: Product: USB PHY 2.0
[ KERNEL] [ 2.167768] usb 1-1.1: Manufacturer: Jieli Technology
[ KERNEL] [ 2.266915] usb 1-1.3: new full-speed USB device number 4 using xhci_hcd
[ KERNEL] [ 2.404728] usb 1-1.3: New USB device found, idVendor=24ae, idProduct=2013, bcdDevice= 1.10
[ KERNEL] [ 2.404742] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ KERNEL] [ 2.404753] usb 1-1.3: Product: Rapoo 2.4G Wireless Device
[ KERNEL] [ 2.404763] usb 1-1.3: Manufacturer: RAPOO
[ KERNEL] [ 2.414582] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:24AE:2013.0001/input/input0
[ KERNEL] [ 2.414853] hid-generic 0003:24AE:2013.0001: input,hidraw0: USB HID v1.10 Mouse [RAPOO Rapoo 2.4G Wireless Device] on usb-0000:01:00.0-1.3/input0
[ KERNEL] [ 2.420869] input: RAPOO Rapoo 2.4G Wireless Device System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:24AE:2013.0002/input/input2
[ KERNEL] [ 2.497244] input: RAPOO Rapoo 2.4G Wireless Device Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:24AE:2013.0002/input/input3
[ KERNEL] [ 2.497723] hid-generic 0003:24AE:2013.0002: input,hiddev96,hidraw1: USB HID v1.10 Device [RAPOO Rapoo 2.4G Wireless Device] on usb-0000:01:00.0-1.3/input1
[ KERNEL] [ 2.502720] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:24AE:2013.0003/input/input4
[ KERNEL] [ 2.567722] hid-generic 0003:24AE:2013.0003: input,hidraw2: USB HID v1.10 Keyboard [RAPOO Rapoo 2.4G Wireless Device] on usb-0000:01:00.0-1.3/input2
/--- FILE "/bootmedia/configs/initrd.wtc" -----------------------
| clientIP = *
| config = local
| setupPassword = cc72aad3323582f495f9cce9c18dded0
\----------------------------------------------------
[ initrd] [ 2.591231] Do not cache package files.
[ initrd] [ 2.591294] WTpassword present: cc72aad3323582f495f9cce9c18dded0.
[ initrd] [ 2.591345] Unpack /bootmedia/packages/pi2-lib.
[ initrd] [ 3.237948] USB: 24ae:2013 Shenzhen Rapoo Technology Co., Ltd..
[ initrd] [ 3.238009] USB: 1224:2a25 .
[ initrd] [ 3.238043] USB: 2109:3431 VIA Labs, Inc. Hub.
[ initrd] [ 4.597183] Load Ethernet drivers.
[ initrd] [ 4.597297] modprobe genet.
[ KERNEL] [ 4.613325] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[ KERNEL] [ 4.626916] libphy: bcmgenet MII bus: probed
[ KERNEL] [ 4.716988] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[ KERNEL] [ 4.720582] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[ KERNEL] [ 4.727835] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ initrd] [ 4.814423] WTpassword present: cc72aad3323582f495f9cce9c18dded0.
[ initrd] [ 6.053184] dhcp: 576 bytes from 192.168.1.1.
[ initrd] [ 6.053289] 00000000:0000022C0000000000110000C0A80101C0A8010E00430044022C000002010600 ...,................C.D.,......
[ initrd] [ 6.053379] 00000020:67458B6B0000000000000000C0A8010E0000000000000000DCA63257526A0000 gE.k......................2WRj..
[ initrd] [ 6.053465] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 6.053550] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 6.053635] 00000080:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 6.053719] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 6.053803] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 6.053886] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 6.053971] 00000100:0000000000000000638253633501023604C0A801013304000151800104FFFFFF ........c.Sc5..6.....3...Q......
[ initrd] [ 6.054055] 00000120:000304C0A801010604C0A80101FF000000000000000000000000000000000000 ................................
[ initrd] [ 7.223200] dhcp: 576 bytes from 192.168.1.1.
[ initrd] [ 7.223295] 00000000:0000022C0000000000110000C0A80101C0A8010E00430044022C000002010600 ...,................C.D.,......
[ initrd] [ 7.223381] 00000020:67458B6B0000000000000000C0A8010E0000000000000000DCA63257526A0000 gE.k......................2WRj..
[ initrd] [ 7.223466] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 7.223549] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 7.223633] 00000080:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 7.223716] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 7.223800] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 7.223884] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 7.223967] 00000100:0000000000000000638253633501053604C0A801013304000151800104FFFFFF ........c.Sc5..6.....3...Q......
[ initrd] [ 7.224051] 00000120:000304C0A801010604C0A80101FF000000000000000000000000000000000000 ................................
[ initrd] [ 7.260088] [DHCP] DHCP server address 192.168.1.1.
[ initrd] [ 7.260179] [DHCP] IP 192.168.1.14 mask 255.255.255.0.
[ initrd] [ 7.260263] [DHCP] Default gateway 192.168.1.1.
[ initrd] [ 7.260345] [DHCP] DNS 192.168.1.1.
[ initrd] [ 7.260429] [DHCP] TFTP = DHCP 192.168.1.1.
[ initrd] [ 7.260511] [DHCP] TFTP 192.168.1.1.
[ initrd] [ 7.260593] [DHCP] No boot file from DHCP.
[ initrd] [ 7.260675] [DHCP] TFTP binary "", configs prefix "", using "/" slash.
WTC listener is active.
WTC broadcast listener is active.
Send broadcast WTCU discover.
[ pfac] [ 7.262090] Run /sbin/httpd.
[ initrd] [ 7.262148] Run '/sbin/httpd', log '/tmp/httpd.out', env '', pid ''.
[ pfac] [ 7.262253] Ok, PID 872.
[ initrd] [ 7.262299] Copy /bootmedia/configs/config.wtc to /tmp/config.wtc.
[ initrd] [ 7.262385] /bootmedia/configs/config.wtc -> /tmp/config.wtc, 182 bytes copied.
[ initrd] [ 7.262477] Common local disk config:
/--- FILE "/tmp/config.wtc" -----------------------
| [BOM]
| server=192.168.1.250
| user=user1:5i2vmxTdSfDTH5VQu7aUkA
| vhusb=on
| connection
\----------------------------------------------------
[ initrd] [ 7.262874] Copy /bootmedia/configs/wtware.lic to /tmp/tmp.wtc.
[ initrd] [ 7.263307] /bootmedia/configs/wtware.lic -> /tmp/tmp.wtc, 308 bytes copied.
/--- FILE "/etc/config.compiled" -----------------------
| [BOM]
| server=192.168.1.250
| user=user1:5i2vmxTdSfDTH5VQu7aUkA
| vhusb=on
| connection
\----------------------------------------------------
[ initrd] [ 7.264194] Hostname: "wtwDCA63257526A".
[ httpd] [ 7.270127] Internal HTTP Server, WTware 6.0.46/RPi
[ initrd] [ 7.520237] [NTP] 42 DHCP option is not set.
Everyone can control terminal by RSH.
RSH: listener is active.
Send broadcast WTCU discover.
[ httpd] [ 7.524563] Reread settings.
[ initrd] [ 7.524667] Unpack /bootmedia/packages/pi2-f.
[ httpd] [ 7.524762] Everyone can control terminal by HTTP.
[ KERNEL] [ 7.709159] random: crng init done
[ gm] [ 7.708664] WTware 6.0.46/RPi session manager.
[ gm] [ 7.709150] Keys found. Add event3: RAPOO Rapoo 2.4G Wireless Device.
[ gm] [ 7.709192] EV_REL flag found. Add event2: RAPOO Rapoo 2.4G Wireless Device Consumer Control.
[ gm] [ 7.709232] Keys found. Add event1: RAPOO Rapoo 2.4G Wireless Device System Control.
[ gm] [ 7.770113] EV_REL flag found. Add event0: RAPOO Rapoo 2.4G Wireless Device.
[ gm] [ 7.770289] Display mode: 1920x1080, 32 bit, landscape, 0 Hz, modeline "", DDC enabled, connector 0.
[ gm] [ 8.099726] Framebuffer device found.
[ gm] [ 8.099774] LINELENBYTES 7680
[ gm] [ 8.099811] VLEN 8294400
[ gm] [ 8.101105] Use /lib/ui32.so.
[ gm] [ 8.101339] Copy /bootmedia/configs/menu.png to /tmp/menu.png.
[ gm] [ 8.109382] /bootmedia/configs/menu.png -> /tmp/menu.png, 165541 bytes copied.
[ gm] [ 8.273446] Use '/tmp/wait.png'.
[ gm] [ 8.284268] Copy /bootmedia/configs/vhusbdarm to /vh/vhusbdarm.
[ gm] [ 8.302139] /bootmedia/configs/vhusbdarm -> /vh/vhusbdarm, 352756 bytes copied.
/--- FILE "/vh/config.ini" -----------------------
| ServerName=wtwDCA63257526A
| Hostname=wtwDCA63257526A
| UseAVAHI=0
\----------------------------------------------------
[ gm] [ 8.302353] Run '/vh/vhusbdarm -b -c /vh/config.ini -r /tmp/vh.out', log '', env '', pid ''.
[ pfac] [ 8.302433] Run /vh/vhusbdarm -b -c /vh/config.ini -r /tmp/vh.out.
[ pfac] [ 8.302626] Ok, PID 873.
[ gm] [ 8.326961] Run '/sbin/resolver 0x1250e20 dns [192.168.1.250]', log '', env '', pid ''.
[ pfac] [ 8.327035] Run /sbin/resolver 0x1250e20 dns [192.168.1.250].
[ gm] [ 8.327059] Nobody can control terminal by VNC.
[ gm] [ 8.327100] Nobody can control terminal by WTRC.
[ pfac] [ 8.327227] Ok, PID 874.
[ gm] [ 8.331829] 192.168.1.250 => 192.168.1.250.
[ pfac] [ 8.332031] Process pid 874 terminated, status 00000000.
[ gm] [ 8.339526] Free ram before fork terminal client /sbin/rdpclient (session 1): 1876468 Kb.
[ pfac] [ 8.339598] Run /sbin/rdpclient 1.
[ gm] [ 8.339620] Run '/sbin/rdpclient 1', log '/tmp/rdpclient.out', env '', pid ''.
[ pfac] [ 8.339712] Ok, PID 875.
[ rdpclient 875] [ 8.346604] RDP Terminal Client, WTware 6.0.46/RPi, pipe 1, pid 875.
[ rdpclient 875] [ 8.350474] Use /lib/ui32.so.
[ rdpclient 875] [ 8.351371] Make RDP session with 192.168.1.250, port 3389.
[ rdpclient 875] [ 8.351440] Username: "user1".
[ rdpclient 875] [ 8.351492] Password: present.
[ rdpclient 875] [ 8.351543] No PIN.
[ rdpclient 875] [ 8.351594] No domain.
[ rdpclient 875] [ 8.351645] No shell.
[ rdpclient 875] [ 8.351696] No directory.
[ rdpclient 875] [ 8.351758] Window: 1856x1080@24.
[ rdpclient 875] [ 8.351812] PFlags 0x0000002F.
[ rdpclient 875] [ 8.351864] Keyboard 00000409:00000000.
[ rdpclient 875] [ 8.351916] My hostname "wtwDCA63257526A".
[ rdpclient 875] [ 8.351969] TCP: connecting to 192.168.1.250:3389.
[ rdpclient 875] [ 8.352581] TCP: connection with 192.168.1.250:3389 established.
[ rdpclient 875] [ 8.352644] Turn keepalive on.
[ rdpclient 875] [ 8.353230] Free ram after buffers allocation: 1875712 KB.
[ rdpclient 875] [ 8.359079] Server supports GFX Pipeline.
[ rdpclient 875] [ 8.360401] RDP server version code 0x0008000e.
[ rdpclient 875] [ 8.360461] Process RDP server certificate.
[ rdpclient 875] [ 8.360513] RDP4 encryption.
[ rdpclient 875] [ 8.363082] Enable font smoothing and Desktop Composition.
[ VirtualHere] [ 8.366372] Wed Apr 7 00:00:07 2021 LOG_INFO >>> Starting VirtualHere USB Server v4.5.9 (Built: Aug 23 2023, 06:56:25)<<<
[ VirtualHere] [ 8.366404] Wed Apr 7 00:00:07 2021 LOG_INFO Using configuration /vh/config.ini
[ pfac] [ 8.366710] Process pid 873 terminated, status 00000000.
[ rdpclient 875] [ 8.368867] License: STATUS_VALID_CLIENT.
[ rdpclient 875] [ 8.418769] Advertice h264 AVC444.
[ rdpclient 875] [ 8.419892] GFX codec.
[ VirtualHere] [ 8.432665] Wed Apr 7 00:00:07 2021 LOG_INFO Server licensed to=unlicensed max_devices=1
[ VirtualHere] [ 8.432966] Wed Apr 7 00:00:07 2021 LOG_INFO Using large URB's
[ VirtualHere] [ 8.434458] Wed Apr 7 00:00:07 2021 LOG_INFO Listening on all network interfaces at TCP port 7575
[ VirtualHere] [ 8.435947] Wed Apr 7 00:00:07 2021 LOG_INFO Found Full speed device [24ae:2013] "RAPOO, Rapoo 2.4G Wireless Device" at address 113
[ VirtualHere] [ 8.436883] Wed Apr 7 00:00:07 2021 LOG_INFO Found High speed device [1224:2a25] "Jieli Technology, USB PHY 2.0" at address 111
[ rdpclient 875] [ 8.447664] Graphics output buffer 1856x1080, 1 monitors.
[ rdpclient 875] [ 8.447757] Monitor 0: 0.0-1855.1079 primary.
[ rdpclient 875] [ 8.764471] LOGON_EX_LOGONERRORS: ErrorNotificationType 0xfffffffe, ErrorNotificationData 0x00000003.
[ rdpclient 875] [ 8.916487] Run 4 tile threads.
[ rdpclient 875] [ 9.109849] SessionId 0x00000003: WIN-398KPGP0CIF\user1.
I put everything away, I left it alone, but without result, it's still the same. I am attaching logs[code]WTware v.6.0.46/RPi
WTware 6.0.46/RPi supervisor.
[ KERNEL] [ 0.000000] Booting Linux on physical CPU 0x0
[ KERNEL] [ 0.000000] Linux version 5.10.25-v7l (aka@c22) (arm-linux-gnueabihf-gcc (Debian 8.3.0-2) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #11 SMP Wed Apr 7 14:31:15 UTC 2021
[ KERNEL] [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d
[ KERNEL] [ 0.000000] CPU: div instructions available: patching division code
[ KERNEL] [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ KERNEL] [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.1
[ KERNEL] [ 0.000000] Memory policy: Data cache writealloc
[ KERNEL] [ 0.000000] Reserved memory: created CMA memory pool at 0x000000002ac00000, size 64 MiB
[ KERNEL] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ KERNEL] [ 0.000000] Zone ranges:
[ KERNEL] [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
[ KERNEL] [ 0.000000] Normal empty
[ KERNEL] [ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff]
[ KERNEL] [ 0.000000] Movable zone start for each node
[ KERNEL] [ 0.000000] Early memory node ranges
[ KERNEL] [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
[ KERNEL] [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff]
[ KERNEL] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[ KERNEL] [ 0.000000] On node 0 totalpages: 504832
[ KERNEL] [ 0.000000] DMA zone: 1920 pages used for memmap
[ KERNEL] [ 0.000000] DMA zone: 0 pages reserved
[ KERNEL] [ 0.000000] DMA zone: 196608 pages, LIFO batch:63
[ KERNEL] [ 0.000000] HighMem zone: 308224 pages, LIFO batch:63
[ KERNEL] [ 0.000000] percpu: Embedded 15 pages/cpu s29580 r8192 d23668 u61440
[ KERNEL] [ 0.000000] pcpu-alloc: s29580 r8192 d23668 u61440 alloc=15*4096
[ KERNEL] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ KERNEL] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 502912
[ KERNEL] [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbdepth=32 bcm2708_fb.fbswap=1 smsc95xx.macaddr=DC:A6:32:57:52:6A vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 hide_setup dwc_otg.lpm_enable=0 quiet wtboot=mmc
[ KERNEL] [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ KERNEL] [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ KERNEL] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ KERNEL] [ 0.000000] software IO TLB: mapped [mem 0x0000000025800000-0x0000000029800000] (64MB)
[ KERNEL] [ 0.000000] Memory: 1855584K/2019328K available (6144K kernel code, 580K rwdata, 812K rodata, 2048K init, 378K bss, 98208K reserved, 65536K cma-reserved, 1232896K highmem)
[ KERNEL] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ KERNEL] [ 0.000000] rcu: Hierarchical RCU implementation.
[ KERNEL] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ KERNEL] [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ KERNEL] [ 0.000000] GIC: Using split EOI/Deactivate mode
[ KERNEL] [ 0.000000] random: get_random_bytes called from 0xc0a00bdc with crng_init=0
[ KERNEL] [ 0.000007] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[ KERNEL] [ 0.000023] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[ KERNEL] [ 0.000074] bcm2835: system timer (irq = 25)
[ KERNEL] [ 0.000630] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ KERNEL] [ 0.000647] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ KERNEL] [ 0.000664] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ KERNEL] [ 0.000677] Switching to timer-based delay loop, resolution 18ns
[ KERNEL] [ 0.000852] Console: colour dummy device 80x30
[ KERNEL] [ 0.000899] printk: console [tty0] enabled
[ KERNEL] [ 0.000935] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000)
[ KERNEL] [ 0.000954] pid_max: default: 32768 minimum: 301
[ KERNEL] [ 0.001087] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ KERNEL] [ 0.001102] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ KERNEL] [ 0.001611] CPU: Testing write buffer coherency: ok
[ KERNEL] [ 0.001819] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ KERNEL] [ 0.002181] Setting up static identity map for 0x200000 - 0x20003c
[ KERNEL] [ 0.002257] rcu: Hierarchical SRCU implementation.
[ KERNEL] [ 0.002511] smp: Bringing up secondary CPUs ...
[ KERNEL] [ 0.003062] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ KERNEL] [ 0.003685] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ KERNEL] [ 0.004294] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ KERNEL] [ 0.004382] smp: Brought up 1 node, 4 CPUs
[ KERNEL] [ 0.004394] SMP: Total of 4 processors activated (432.00 BogoMIPS).
[ KERNEL] [ 0.004403] CPU: All CPU(s) started in HYP mode.
[ KERNEL] [ 0.004410] CPU: Virtualization extensions available.
[ KERNEL] [ 0.004777] devtmpfs: initialized
[ KERNEL] [ 0.013785] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0
[ KERNEL] [ 0.014053] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ KERNEL] [ 0.014072] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ KERNEL] [ 0.015492] pinctrl core: initialized pinctrl subsystem
[ KERNEL] [ 0.016494] NET: Registered protocol family 16
[ KERNEL] [ 0.018258] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ KERNEL] [ 0.019824] thermal_sys: Registered thermal governor 'step_wise'
[ KERNEL] [ 0.020599] Serial: AMBA PL011 UART driver
[ KERNEL] [ 0.037693] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ KERNEL] [ 0.050640] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-03-26T16:33:26, variant start
[ KERNEL] [ 0.060655] raspberrypi-firmware soc:firmware: Firmware hash is edf2e9c318863999c97c50cdb74eee235ede3af5
[ KERNEL] [ 0.099862] cryptd: max_cpu_qlen set to 1000
[ KERNEL] [ 0.101801] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
[ KERNEL] [ 0.104779] vgaarb: loaded
[ KERNEL] [ 0.105270] usbcore: registered new interface driver usbfs
[ KERNEL] [ 0.105366] usbcore: registered new interface driver hub
[ KERNEL] [ 0.105415] usbcore: registered new device driver usb
[ KERNEL] [ 0.106895] clocksource: Switched to clocksource arch_sys_counter
[ KERNEL] [ 0.117956] NET: Registered protocol family 2
[ KERNEL] [ 0.118495] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ KERNEL] [ 0.118515] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ KERNEL] [ 0.118570] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ KERNEL] [ 0.118630] TCP: Hash tables configured (established 8192 bind 8192)
[ KERNEL] [ 0.118727] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ KERNEL] [ 0.118754] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ KERNEL] [ 0.118885] NET: Registered protocol family 1
[ KERNEL] [ 0.118911] PCI: CLS 0 bytes, default 64
[ KERNEL] [ 0.851334] Initialise system trusted keyrings
[ KERNEL] [ 0.856963] workingset: timestamp_bits=30 max_order=19 bucket_order=0
[ KERNEL] [ 0.967686] Key type asymmetric registered
[ KERNEL] [ 0.967697] Asymmetric key parser 'x509' registered
[ KERNEL] [ 0.967753] bounce: pool size: 64 pages
[ KERNEL] [ 0.967798] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ KERNEL] [ 0.969932] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ KERNEL] [ 0.969952] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[ KERNEL] [ 0.969984] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000
[ KERNEL] [ 0.970017] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x007fffffff -> 0x0400000000
[ KERNEL] [ 1.028985] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[ KERNEL] [ 1.029212] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ KERNEL] [ 1.029227] pci_bus 0000:00: root bus resource [bus 00-ff]
[ KERNEL] [ 1.029241] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
[ KERNEL] [ 1.029287] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ KERNEL] [ 1.029378] pci 0000:00:00.0: PME# supported from D0 D3hot
[ KERNEL] [ 1.032276] PCI: bus0: Fast back to back transfers disabled
[ KERNEL] [ 1.032291] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ KERNEL] [ 1.032514] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[ KERNEL] [ 1.032599] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ KERNEL] [ 1.032852] pci 0000:01:00.0: PME# supported from D0 D3cold
[ KERNEL] [ 1.035698] PCI: bus1: Fast back to back transfers disabled
[ KERNEL] [ 1.035715] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ KERNEL] [ 1.035744] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[ KERNEL] [ 1.035760] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[ KERNEL] [ 1.035816] pci 0000:00:00.0: PCI bridge to [bus 01]
[ KERNEL] [ 1.035829] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
[ KERNEL] [ 1.036017] pcieport 0000:00:00.0: enabling device (0140 -> 0142)
[ KERNEL] [ 1.036152] pcieport 0000:00:00.0: PME: Signaling with IRQ 61
[ KERNEL] [ 1.036724] bcm2708_fb soc:fb: FB found 1 display(s)
[ KERNEL] [ 1.067336] Console: switching to colour frame buffer device 240x67
[ KERNEL] [ 1.077594] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1920x1080
[ KERNEL] [ 1.080128] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ KERNEL] [ 1.080838] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default
[ KERNEL] [ 1.081753] iproc-rng200 fe104000.rng: hwrng registered
[ KERNEL] [ 1.081930] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ KERNEL] [ 1.082529] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[ KERNEL] [ 1.082993] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000
[ KERNEL] [ 1.083274] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000
[ KERNEL] [ 1.083482] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000
[ KERNEL] [ 1.083695] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000
[ KERNEL] [ 1.086618] zram: Added device: zram0
[ KERNEL] [ 1.088862] libphy: Fixed MDIO Bus: probed
[ KERNEL] [ 1.142805] xhci_hcd 0000:01:00.0: enabling device (0140 -> 0142)
[ KERNEL] [ 1.142930] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ KERNEL] [ 1.142964] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ KERNEL] [ 1.144430] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000060000000890
[ KERNEL] [ 1.144871] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ KERNEL] [ 1.144884] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ KERNEL] [ 1.144894] usb usb1: Product: xHCI Host Controller
[ KERNEL] [ 1.144904] usb usb1: Manufacturer: Linux 5.10.25-v7l xhci-hcd
[ KERNEL] [ 1.144914] usb usb1: SerialNumber: 0000:01:00.0
[ KERNEL] [ 1.145394] hub 1-0:1.0: USB hub found
[ KERNEL] [ 1.145457] hub 1-0:1.0: 1 port detected
[ KERNEL] [ 1.145994] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ KERNEL] [ 1.146016] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ KERNEL] [ 1.146041] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ KERNEL] [ 1.146300] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[ KERNEL] [ 1.146314] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ KERNEL] [ 1.146325] usb usb2: Product: xHCI Host Controller
[ KERNEL] [ 1.146347] usb usb2: Manufacturer: Linux 5.10.25-v7l xhci-hcd
[ KERNEL] [ 1.146365] usb usb2: SerialNumber: 0000:01:00.0
[ KERNEL] [ 1.146816] hub 2-0:1.0: USB hub found
[ KERNEL] [ 1.146861] hub 2-0:1.0: 4 ports detected
[ KERNEL] [ 1.147926] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ KERNEL] [ 1.148031] dwc_otg: FIQ enabled
[ KERNEL] [ 1.148039] dwc_otg: NAK holdoff enabled
[ KERNEL] [ 1.148047] dwc_otg: FIQ split-transaction FSM enabled
[ KERNEL] [ 1.148058] Module dwc_common_port init
[ KERNEL] [ 1.151883] usbcore: registered new interface driver usbtouchscreen
[ KERNEL] [ 1.153225] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ KERNEL] [ 1.154291] sdhci: Secure Digital Host Controller Interface driver
[ KERNEL] [ 1.154301] sdhci: Copyright(c) Pierre Ossman
[ KERNEL] [ 1.154697] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
[ KERNEL] [ 1.154942] sdhci-pltfm: SDHCI platform and OF driver helper
[ KERNEL] [ 1.155158] hid: raw HID events driver (C) Jiri Kosina
[ KERNEL] [ 1.155786] usbcore: registered new interface driver usbhid
[ KERNEL] [ 1.155790] usbhid: USB HID core driver
[ KERNEL] [ 1.168966] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ KERNEL] [ 1.168976] [vc_sm_connected_init]: start
[ KERNEL] [ 1.174700] [vc_sm_connected_init]: installed successfully
[ KERNEL] [ 1.174917] NET: Registered protocol family 17
[ KERNEL] [ 1.175069] Registering SWP/SWPB emulation handler
[ KERNEL] [ 1.175599] Loading compiled-in X.509 certificates
[ KERNEL] [ 1.176798] uart-pl011 fe201000.serial: there is not valid maps for state default
[ KERNEL] [ 1.176870] uart-pl011 fe201000.serial: cts_event_workaround enabled
[ KERNEL] [ 1.176926] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 36, base_baud = 0) is a PL011 rev2
[ KERNEL] [ 1.180917] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default
[ KERNEL] [ 1.181159] fe215040.serial: ttyS0 at MMIO 0xfe215040 (irq = 37, base_baud = 62500000) is a 16550
[ KERNEL] [ 1.181456] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ KERNEL] [ 1.181729] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ KERNEL] [ 1.181733] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[ KERNEL] [ 1.208483] of_cfs_init
[ KERNEL] [ 1.208600] of_cfs_init: OK
[ KERNEL] [ 1.224434] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ KERNEL] [ 1.225934] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ KERNEL] [ 1.227435] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ KERNEL] [ 1.230129] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ KERNEL] [ 1.231628] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ KERNEL] [ 1.247046] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
[ KERNEL] [ 1.249766] Freeing unused kernel memory: 2048K
[ KERNEL] [ 1.265543] random: fast init done
[ KERNEL] [ 1.290167] mmc1: new high speed SDIO card at address 0001
[ KERNEL] [ 1.298801] mmc0: new high speed SDHC card at address aaaa
[ KERNEL] [ 1.299364] mmcblk0: mmc0:aaaa SU04G 3.69 GiB
[ KERNEL] [ 1.300617] mmcblk0: p1
[ KERNEL] [ 1.317044] Run /init as init process
[ KERNEL] [ 1.317051] with arguments:
[ KERNEL] [ 1.317057] /init
[ KERNEL] [ 1.317063] hide_setup
[ KERNEL] [ 1.317068] with environment:
[ KERNEL] [ 1.317074] HOME=/
[ KERNEL] [ 1.317080] TERM=linux
[ KERNEL] [ 1.317085] wtboot=mmc
[ KERNEL] [ 1.526929] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ pfac] [ 1.627047] Run /sbin/initrd.
[ pfac] [ 1.627281] Ok, PID 805.
[ initrd] [ 1.631332] WTware 6.0.46/RPi shell.
[ initrd] [ 1.631684] Load font 'ter-c32b.psf', console 120x33.
[ initrd] [ 1.646182] HDD/MMC/SD boot.
[ initrd] [ 1.646258] No device '/dev/fb1'.
[ initrd] [ 1.699487] Success: /dev/mmcblk0p1 mounted to /bootmedia.
/--- FILE "/bootmedia/config.txt" -----------------------
| # For more options and information see:
| #
| # https://www.raspberrypi.org/documentation/configuration/config-txt/README.md
| #
| # Some settings may impact device functionality. See link above for details.
| # Uncomment if you get no picture on HDMI for a default "safe" mode.
| #hdmi_safe=1
| # Uncomment this if your display has a black border of unused pixels visible
| # and your display can output without overscan.
| disable_overscan=1
| # Uncomment if hdmi display is not detected and composite is being output.
| #hdmi_force_hotplug=1
| # Uncomment to force a specific HDMI mode (this will force VGA).
| #hdmi_group=1
| #hdmi_mode=1
| # Force the monitor to HDMI mode so that sound will be sent over HDMI cable.
| #hdmi_drive=2
| # Uncomment to increase signal to HDMI, if you have interference, blanking, or
| # no display.
| #config_hdmi_boost=4
| # Uncomment to overclock the arm. 700 MHz is the default.
| #arm_freq=800
| disable_splash=1
| enable_uart=1
| framebuffer_depth=32
| # Uncomment for 16-bit color.
| #framebuffer_depth=16
| # Enable onboard audio (HDMI or jack).
| dtparam=audio=on
| # Removes the warning overlay.
| #avoid_warnings=1
| # Additionally allows turbo when low-voltage is present.
| #avoid_warnings=2
| [pi4]
| max_framebuffers=2
| [all]
| # Uncomment these two lines to set display resolution:
| #hdmi_group=2
| #hdmi_mode=58
| #
| # Specify correct value in hdmi_mode= line from the list of valid values:
| # 800x600: hdmi_mode=9
| # 1024x768: hdmi_mode=16
| # 1280x1024: hdmi_mode=35
| # 1360x768: hdmi_mode=39
| # 1400x1050: hdmi_mode=42
| # 1440x900: hdmi_mode=47
| # 1600x1200: hdmi_mode=51
| # 1680x1050: hdmi_mode=58
| # 1366x768: hdmi_mode=81
| # 1920x1080: hdmi_mode=82
| # 1920x1200: hdmi_mode=69
| #
| # Find more resolutions in manual:
| # https://www.raspberrypi.org/documentation/configuration/config-txt/video.md
| #
| # Uncomment six lines with such syntax and right hdmi_mode= values for
| # dual displays on Raspberry Pi 4:
| #
| #[HDMI:0]
| # hdmi_group=2
| # hdmi_mode=42
| #[HDMI:1]
| # hdmi_group=2
| # hdmi_mode=58
\----------------------------------------------------
[ KERNEL] [ 1.709547] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[ KERNEL] [ 1.709560] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ KERNEL] [ 1.709571] usb 1-1: Product: USB2.0 Hub
[ initrd] [ 1.706045] Copy /bootmedia/configs/wait.png to /tmp/wait.png.
[ KERNEL] [ 1.711094] hub 1-1:1.0: USB hub found
[ KERNEL] [ 1.711430] hub 1-1:1.0: 4 ports detected
[ initrd] [ 1.746128] /bootmedia/configs/wait.png -> /tmp/wait.png, 880250 bytes copied.
[ initrd] [ 1.746237] Use configs/wait.png.
[ initrd] [ 1.746313] Screen 1920x1080 32 color bits, LINELENBYTES 7680, VLEN 8294400.
[ KERNEL] [ 2.036953] usb 1-1.1: new high-speed USB device number 3 using xhci_hcd
[ KERNEL] [ 2.167734] usb 1-1.1: New USB device found, idVendor=1224, idProduct=2a25, bcdDevice= 1.00
[ KERNEL] [ 2.167748] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ KERNEL] [ 2.167759] usb 1-1.1: Product: USB PHY 2.0
[ KERNEL] [ 2.167768] usb 1-1.1: Manufacturer: Jieli Technology
[ KERNEL] [ 2.266915] usb 1-1.3: new full-speed USB device number 4 using xhci_hcd
[ KERNEL] [ 2.404728] usb 1-1.3: New USB device found, idVendor=24ae, idProduct=2013, bcdDevice= 1.10
[ KERNEL] [ 2.404742] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ KERNEL] [ 2.404753] usb 1-1.3: Product: Rapoo 2.4G Wireless Device
[ KERNEL] [ 2.404763] usb 1-1.3: Manufacturer: RAPOO
[ KERNEL] [ 2.414582] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:24AE:2013.0001/input/input0
[ KERNEL] [ 2.414853] hid-generic 0003:24AE:2013.0001: input,hidraw0: USB HID v1.10 Mouse [RAPOO Rapoo 2.4G Wireless Device] on usb-0000:01:00.0-1.3/input0
[ KERNEL] [ 2.420869] input: RAPOO Rapoo 2.4G Wireless Device System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:24AE:2013.0002/input/input2
[ KERNEL] [ 2.497244] input: RAPOO Rapoo 2.4G Wireless Device Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:24AE:2013.0002/input/input3
[ KERNEL] [ 2.497723] hid-generic 0003:24AE:2013.0002: input,hiddev96,hidraw1: USB HID v1.10 Device [RAPOO Rapoo 2.4G Wireless Device] on usb-0000:01:00.0-1.3/input1
[ KERNEL] [ 2.502720] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:24AE:2013.0003/input/input4
[ KERNEL] [ 2.567722] hid-generic 0003:24AE:2013.0003: input,hidraw2: USB HID v1.10 Keyboard [RAPOO Rapoo 2.4G Wireless Device] on usb-0000:01:00.0-1.3/input2
/--- FILE "/bootmedia/configs/initrd.wtc" -----------------------
| clientIP = *
| config = local
| setupPassword = cc72aad3323582f495f9cce9c18dded0
\----------------------------------------------------
[ initrd] [ 2.591231] Do not cache package files.
[ initrd] [ 2.591294] WTpassword present: cc72aad3323582f495f9cce9c18dded0.
[ initrd] [ 2.591345] Unpack /bootmedia/packages/pi2-lib.
[ initrd] [ 3.237948] USB: 24ae:2013 Shenzhen Rapoo Technology Co., Ltd..
[ initrd] [ 3.238009] USB: 1224:2a25 .
[ initrd] [ 3.238043] USB: 2109:3431 VIA Labs, Inc. Hub.
[ initrd] [ 4.597183] Load Ethernet drivers.
[ initrd] [ 4.597297] modprobe genet.
[ KERNEL] [ 4.613325] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[ KERNEL] [ 4.626916] libphy: bcmgenet MII bus: probed
[ KERNEL] [ 4.716988] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[ KERNEL] [ 4.720582] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[ KERNEL] [ 4.727835] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ initrd] [ 4.814423] WTpassword present: cc72aad3323582f495f9cce9c18dded0.
[ initrd] [ 6.053184] dhcp: 576 bytes from 192.168.1.1.
[ initrd] [ 6.053289] 00000000:0000022C0000000000110000C0A80101C0A8010E00430044022C000002010600 ...,................C.D.,......
[ initrd] [ 6.053379] 00000020:67458B6B0000000000000000C0A8010E0000000000000000DCA63257526A0000 gE.k......................2WRj..
[ initrd] [ 6.053465] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 6.053550] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 6.053635] 00000080:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 6.053719] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 6.053803] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 6.053886] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 6.053971] 00000100:0000000000000000638253633501023604C0A801013304000151800104FFFFFF ........c.Sc5..6.....3...Q......
[ initrd] [ 6.054055] 00000120:000304C0A801010604C0A80101FF000000000000000000000000000000000000 ................................
[ initrd] [ 7.223200] dhcp: 576 bytes from 192.168.1.1.
[ initrd] [ 7.223295] 00000000:0000022C0000000000110000C0A80101C0A8010E00430044022C000002010600 ...,................C.D.,......
[ initrd] [ 7.223381] 00000020:67458B6B0000000000000000C0A8010E0000000000000000DCA63257526A0000 gE.k......................2WRj..
[ initrd] [ 7.223466] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 7.223549] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 7.223633] 00000080:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 7.223716] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 7.223800] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 7.223884] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 7.223967] 00000100:0000000000000000638253633501053604C0A801013304000151800104FFFFFF ........c.Sc5..6.....3...Q......
[ initrd] [ 7.224051] 00000120:000304C0A801010604C0A80101FF000000000000000000000000000000000000 ................................
[ initrd] [ 7.260088] [DHCP] DHCP server address 192.168.1.1.
[ initrd] [ 7.260179] [DHCP] IP 192.168.1.14 mask 255.255.255.0.
[ initrd] [ 7.260263] [DHCP] Default gateway 192.168.1.1.
[ initrd] [ 7.260345] [DHCP] DNS 192.168.1.1.
[ initrd] [ 7.260429] [DHCP] TFTP = DHCP 192.168.1.1.
[ initrd] [ 7.260511] [DHCP] TFTP 192.168.1.1.
[ initrd] [ 7.260593] [DHCP] No boot file from DHCP.
[ initrd] [ 7.260675] [DHCP] TFTP binary "", configs prefix "", using "/" slash.
WTC listener is active.
WTC broadcast listener is active.
Send broadcast WTCU discover.
[ pfac] [ 7.262090] Run /sbin/httpd.
[ initrd] [ 7.262148] Run '/sbin/httpd', log '/tmp/httpd.out', env '', pid ''.
[ pfac] [ 7.262253] Ok, PID 872.
[ initrd] [ 7.262299] Copy /bootmedia/configs/config.wtc to /tmp/config.wtc.
[ initrd] [ 7.262385] /bootmedia/configs/config.wtc -> /tmp/config.wtc, 182 bytes copied.
[ initrd] [ 7.262477] Common local disk config:
/--- FILE "/tmp/config.wtc" -----------------------
| [BOM]
| server=192.168.1.250
| user=user1:5i2vmxTdSfDTH5VQu7aUkA
| vhusb=on
| connection
\----------------------------------------------------
[ initrd] [ 7.262874] Copy /bootmedia/configs/wtware.lic to /tmp/tmp.wtc.
[ initrd] [ 7.263307] /bootmedia/configs/wtware.lic -> /tmp/tmp.wtc, 308 bytes copied.
/--- FILE "/etc/config.compiled" -----------------------
| [BOM]
| server=192.168.1.250
| user=user1:5i2vmxTdSfDTH5VQu7aUkA
| vhusb=on
| connection
\----------------------------------------------------
[ initrd] [ 7.264194] Hostname: "wtwDCA63257526A".
[ httpd] [ 7.270127] Internal HTTP Server, WTware 6.0.46/RPi
[ initrd] [ 7.520237] [NTP] 42 DHCP option is not set.
Everyone can control terminal by RSH.
RSH: listener is active.
Send broadcast WTCU discover.
[ httpd] [ 7.524563] Reread settings.
[ initrd] [ 7.524667] Unpack /bootmedia/packages/pi2-f.
[ httpd] [ 7.524762] Everyone can control terminal by HTTP.
[ KERNEL] [ 7.709159] random: crng init done
[ gm] [ 7.708664] WTware 6.0.46/RPi session manager.
[ gm] [ 7.709150] Keys found. Add event3: RAPOO Rapoo 2.4G Wireless Device.
[ gm] [ 7.709192] EV_REL flag found. Add event2: RAPOO Rapoo 2.4G Wireless Device Consumer Control.
[ gm] [ 7.709232] Keys found. Add event1: RAPOO Rapoo 2.4G Wireless Device System Control.
[ gm] [ 7.770113] EV_REL flag found. Add event0: RAPOO Rapoo 2.4G Wireless Device.
[ gm] [ 7.770289] Display mode: 1920x1080, 32 bit, landscape, 0 Hz, modeline "", DDC enabled, connector 0.
[ gm] [ 8.099726] Framebuffer device found.
[ gm] [ 8.099774] LINELENBYTES 7680
[ gm] [ 8.099811] VLEN 8294400
[ gm] [ 8.101105] Use /lib/ui32.so.
[ gm] [ 8.101339] Copy /bootmedia/configs/menu.png to /tmp/menu.png.
[ gm] [ 8.109382] /bootmedia/configs/menu.png -> /tmp/menu.png, 165541 bytes copied.
[ gm] [ 8.273446] Use '/tmp/wait.png'.
[ gm] [ 8.284268] Copy /bootmedia/configs/vhusbdarm to /vh/vhusbdarm.
[ gm] [ 8.302139] /bootmedia/configs/vhusbdarm -> /vh/vhusbdarm, 352756 bytes copied.
/--- FILE "/vh/config.ini" -----------------------
| ServerName=wtwDCA63257526A
| Hostname=wtwDCA63257526A
| UseAVAHI=0
\----------------------------------------------------
[ gm] [ 8.302353] Run '/vh/vhusbdarm -b -c /vh/config.ini -r /tmp/vh.out', log '', env '', pid ''.
[ pfac] [ 8.302433] Run /vh/vhusbdarm -b -c /vh/config.ini -r /tmp/vh.out.
[ pfac] [ 8.302626] Ok, PID 873.
[ gm] [ 8.326961] Run '/sbin/resolver 0x1250e20 dns [192.168.1.250]', log '', env '', pid ''.
[ pfac] [ 8.327035] Run /sbin/resolver 0x1250e20 dns [192.168.1.250].
[ gm] [ 8.327059] Nobody can control terminal by VNC.
[ gm] [ 8.327100] Nobody can control terminal by WTRC.
[ pfac] [ 8.327227] Ok, PID 874.
[ gm] [ 8.331829] 192.168.1.250 => 192.168.1.250.
[ pfac] [ 8.332031] Process pid 874 terminated, status 00000000.
[ gm] [ 8.339526] Free ram before fork terminal client /sbin/rdpclient (session 1): 1876468 Kb.
[ pfac] [ 8.339598] Run /sbin/rdpclient 1.
[ gm] [ 8.339620] Run '/sbin/rdpclient 1', log '/tmp/rdpclient.out', env '', pid ''.
[ pfac] [ 8.339712] Ok, PID 875.
[ rdpclient 875] [ 8.346604] RDP Terminal Client, WTware 6.0.46/RPi, pipe 1, pid 875.
[ rdpclient 875] [ 8.350474] Use /lib/ui32.so.
[ rdpclient 875] [ 8.351371] Make RDP session with 192.168.1.250, port 3389.
[ rdpclient 875] [ 8.351440] Username: "user1".
[ rdpclient 875] [ 8.351492] Password: present.
[ rdpclient 875] [ 8.351543] No PIN.
[ rdpclient 875] [ 8.351594] No domain.
[ rdpclient 875] [ 8.351645] No shell.
[ rdpclient 875] [ 8.351696] No directory.
[ rdpclient 875] [ 8.351758] Window: 1856x1080@24.
[ rdpclient 875] [ 8.351812] PFlags 0x0000002F.
[ rdpclient 875] [ 8.351864] Keyboard 00000409:00000000.
[ rdpclient 875] [ 8.351916] My hostname "wtwDCA63257526A".
[ rdpclient 875] [ 8.351969] TCP: connecting to 192.168.1.250:3389.
[ rdpclient 875] [ 8.352581] TCP: connection with 192.168.1.250:3389 established.
[ rdpclient 875] [ 8.352644] Turn keepalive on.
[ rdpclient 875] [ 8.353230] Free ram after buffers allocation: 1875712 KB.
[ rdpclient 875] [ 8.359079] Server supports GFX Pipeline.
[ rdpclient 875] [ 8.360401] RDP server version code 0x0008000e.
[ rdpclient 875] [ 8.360461] Process RDP server certificate.
[ rdpclient 875] [ 8.360513] RDP4 encryption.
[ rdpclient 875] [ 8.363082] Enable font smoothing and Desktop Composition.
[ VirtualHere] [ 8.366372] Wed Apr 7 00:00:07 2021 LOG_INFO >>> Starting VirtualHere USB Server v4.5.9 (Built: Aug 23 2023, 06:56:25)<<<
[ VirtualHere] [ 8.366404] Wed Apr 7 00:00:07 2021 LOG_INFO Using configuration /vh/config.ini
[ pfac] [ 8.366710] Process pid 873 terminated, status 00000000.
[ rdpclient 875] [ 8.368867] License: STATUS_VALID_CLIENT.
[ rdpclient 875] [ 8.418769] Advertice h264 AVC444.
[ rdpclient 875] [ 8.419892] GFX codec.
[ VirtualHere] [ 8.432665] Wed Apr 7 00:00:07 2021 LOG_INFO Server licensed to=unlicensed max_devices=1
[ VirtualHere] [ 8.432966] Wed Apr 7 00:00:07 2021 LOG_INFO Using large URB's
[ VirtualHere] [ 8.434458] Wed Apr 7 00:00:07 2021 LOG_INFO Listening on all network interfaces at TCP port 7575
[ VirtualHere] [ 8.435947] Wed Apr 7 00:00:07 2021 LOG_INFO Found Full speed device [24ae:2013] "RAPOO, Rapoo 2.4G Wireless Device" at address 113
[ VirtualHere] [ 8.436883] Wed Apr 7 00:00:07 2021 LOG_INFO Found High speed device [1224:2a25] "Jieli Technology, USB PHY 2.0" at address 111
[ rdpclient 875] [ 8.447664] Graphics output buffer 1856x1080, 1 monitors.
[ rdpclient 875] [ 8.447757] Monitor 0: 0.0-1855.1079 primary.
[ rdpclient 875] [ 8.764471] LOGON_EX_LOGONERRORS: ErrorNotificationType 0xfffffffe, ErrorNotificationData 0x00000003.
[ rdpclient 875] [ 8.916487] Run 4 tile threads.
[ rdpclient 875] [ 9.109849] SessionId 0x00000003: WIN-398KPGP0CIF\user1.[/code]