by effin_dead_again » Tue Jan 15, 2019 12:01 am
The video outputs and connected monitors now display:
Code: Select all
For this terminal you may specify next video drivers:
video=i915(F)
video=intel(U)
Video output should be specified in display= and m2_display= parameters while using video=i915(f), radeon(f), gma(f), nouveau(f) drivers and when you connect two displays with any driver. Determined by driver video outputs may not match physical outputs. In configuration file specify video outputs, that driver sees.
On this terminal driver determined next video outputs:
DP first display:
display = 1920x1080, DP
or second display:
m2_display = 1920x1080, DP
HDMI: failed to detect monitor.
DP2: failed to detect monitor.
HDMI2 first display:
display = 1920x1080, HDMI2
or second display:
m2_display = 1920x1080, HDMI2
I was able to run with dual monitors on the latest version without issue. Additionally, I swapped out the displays in the config as instructed and there were not any issues. This issue should be considered resolved, please let me know if it is OK to continue running this 5.8.47 version or if I should wait for an officially supported version to be released.
The video outputs and connected monitors now display:
[code]For this terminal you may specify next video drivers:
video=i915(F)
video=intel(U)
Video output should be specified in display= and m2_display= parameters while using video=i915(f), radeon(f), gma(f), nouveau(f) drivers and when you connect two displays with any driver. Determined by driver video outputs may not match physical outputs. In configuration file specify video outputs, that driver sees.
On this terminal driver determined next video outputs:
DP first display:
display = 1920x1080, DP
or second display:
m2_display = 1920x1080, DP
HDMI: failed to detect monitor.
DP2: failed to detect monitor.
HDMI2 first display:
display = 1920x1080, HDMI2
or second display:
m2_display = 1920x1080, HDMI2[/code]
I was able to run with dual monitors on the latest version without issue. Additionally, I swapped out the displays in the config as instructed and there were not any issues. This issue should be considered resolved, please let me know if it is OK to continue running this 5.8.47 version or if I should wait for an officially supported version to be released.