by geefox » Mon Jan 22, 2018 11:56 am
Minix Device: its working on both screens with following config, and also the portrait mode is working
Code: Select all
video=i915(f)
display=1024x768, HDMI
M2_display=1024x768,DP2
ZBOX:: with the zbox only 1 monitor (HDMI2) is working, the second one stays black - I've attached you the logfile
Code: Select all
video=i915(f)
display=1024x768,HDMI2
M2_display=1024x768,DPI
Going to try this on the HP device aswell, but with that device there is an error after installing to hdd - can't boot - I'll provide you the logfile later that day.
Update:
On the HP device, if I try to boot from USB with 5.6.25, I'm receiving an error.
I've uploaded the picture
Update 2: Tried it with 5.6.24, and there is no error
best,
- Attachments
-
- IMG_3832.jpg (196.65 KiB) Viewed 42669 times
-
- log.txt
- (71.82 KiB) Downloaded 1602 times
[u]Minix Device:[/u] its working on both screens with following config, and also the portrait mode is working
[code]video=i915(f)
display=1024x768, HDMI
M2_display=1024x768,DP2[/code]
[u]ZBOX:[/u]: with the zbox only 1 monitor (HDMI2) is working, the second one stays black - I've attached you the logfile
[code]video=i915(f)
display=1024x768,HDMI2
M2_display=1024x768,DPI[/code]
Going to try this on the HP device aswell, but with that device there is an error after installing to hdd - can't boot - I'll provide you the logfile later that day.
Update:
On the HP device, if I try to boot from USB with 5.6.25, I'm receiving an error.
I've uploaded the picture
Update 2: Tried it with 5.6.24, and there is no error
best,