07-54-32-835| WTware 6.0.30/RPi supervisor.
07-54-32-835| [ KERNEL] [ 0.000000] Booting Linux on physical CPU 0x0
07-54-32-835| [ KERNEL] [ 0.000000] Linux version 5.4.83-v7l (aka@c22) (gcc version 8.3.0 (Debian 8.3.0-2)) #9 SMP Sat Jan 16 18:49:14 UTC 2021
07-54-32-835| [ KERNEL] [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d
07-54-32-835| [ KERNEL] [ 0.000000] CPU: div instructions available: patching division code
07-54-32-835| [ KERNEL] [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
07-54-32-835| [ KERNEL] [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.2
07-54-32-835| [ KERNEL] [ 0.000000] Memory policy: Data cache writealloc
07-54-32-835| [ KERNEL] [ 0.000000] Reserved memory: created CMA memory pool at 0x000000002ac00000, size 64 MiB
07-54-32-835| [ KERNEL] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
07-54-32-835| [ KERNEL] [ 0.000000] On node 0 totalpages: 1012736
07-54-32-835| [ KERNEL] [ 0.000000] DMA zone: 1920 pages used for memmap
07-54-32-835| [ KERNEL] [ 0.000000] DMA zone: 0 pages reserved
07-54-32-835| [ KERNEL] [ 0.000000] DMA zone: 196608 pages, LIFO batch:63
07-54-32-835| [ KERNEL] [ 0.000000] HighMem zone: 816128 pages, LIFO batch:63
07-54-32-835| [ KERNEL] [ 0.000000] percpu: Embedded 15 pages/cpu s29324 r8192 d23924 u61440
07-54-32-835| [ KERNEL] [ 0.000000] pcpu-alloc: s29324 r8192 d23924 u61440 alloc=15*4096
07-54-32-835| [ KERNEL] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
07-54-32-835| [ KERNEL] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1010816
07-54-32-835| [ KERNEL] [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=DC:A6:32:7E:D4:E6 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 no_setup dwc_otg.lpm_enable=0 quiet wtboot=mmc
07-54-32-835| [ KERNEL] [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
07-54-32-835| [ KERNEL] [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
07-54-32-835| [ KERNEL] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
07-54-32-835| [ KERNEL] [ 0.000000] software IO TLB: mapped [mem 0x244a0000-0x284a0000] (64MB)
07-54-32-835| [ KERNEL] [ 0.000000] Memory: 3867788K/4050944K available (6144K kernel code, 161K rwdata, 812K rodata, 2048K init, 375K bss, 117620K reserved, 65536K cma-reserved, 3264512K highmem)
07-54-32-835| [ KERNEL] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
07-54-32-835| [ KERNEL] [ 0.000000] rcu: Hierarchical RCU implementation.
07-54-32-835| [ KERNEL] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
07-54-32-835| [ KERNEL] [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
07-54-32-835| [ KERNEL] [ 0.000000] GIC: Using split EOI/Deactivate mode
07-54-32-835| [ KERNEL] [ 0.000000] random: get_random_bytes called from 0xc0a00b60 with crng_init=0
07-54-32-835| [ KERNEL] [ 0.000007] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
07-54-32-835| [ KERNEL] [ 0.000021] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
07-54-32-835| [ KERNEL] [ 0.000087] bcm2835: system timer (irq = 17)
07-54-32-835| [ KERNEL] [ 0.000624] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
07-54-32-835| [ KERNEL] [ 0.000639] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
07-54-32-835| [ KERNEL] [ 0.000654] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
07-54-32-835| [ KERNEL] [ 0.000665] Switching to timer-based delay loop, resolution 18ns
07-54-32-835| [ KERNEL] [ 0.000825] Console: colour dummy device 80x30
07-54-32-835| [ KERNEL] [ 0.000843] printk: console [tty0] enabled
07-54-32-835| [ KERNEL] [ 0.000878] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000)
07-54-32-835| [ KERNEL] [ 0.000890] pid_max: default: 32768 minimum: 301
07-54-32-835| [ KERNEL] [ 0.001017] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
07-54-32-835| [ KERNEL] [ 0.001032] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
07-54-32-835| [ KERNEL] [ 0.001556] CPU: Testing write buffer coherency: ok
07-54-32-835| [ KERNEL] [ 0.001817] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
07-54-32-835| [ KERNEL] [ 0.002192] Setting up static identity map for 0x200000 - 0x20003c
07-54-32-835| [ KERNEL] [ 0.002269] rcu: Hierarchical SRCU implementation.
07-54-32-835| [ KERNEL] [ 0.002528] smp: Bringing up secondary CPUs ...
07-54-32-835| [ KERNEL] [ 0.003103] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
07-54-32-835| [ KERNEL] [ 0.003750] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
07-54-32-835| [ KERNEL] [ 0.004373] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
07-54-32-835| [ KERNEL] [ 0.004449] smp: Brought up 1 node, 4 CPUs
07-54-32-835| [ KERNEL] [ 0.004458] SMP: Total of 4 processors activated (432.00 BogoMIPS).
07-54-32-835| [ KERNEL] [ 0.004464] CPU: All CPU(s) started in HYP mode.
07-54-32-835| [ KERNEL] [ 0.004470] CPU: Virtualization extensions available.
07-54-32-835| [ KERNEL] [ 0.004863] devtmpfs: initialized
07-54-32-835| [ KERNEL] [ 0.013679] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0
07-54-32-835| [ KERNEL] [ 0.013959] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
07-54-32-835| [ KERNEL] [ 0.013976] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
07-54-32-835| [ KERNEL] [ 0.015359] pinctrl core: initialized pinctrl subsystem
07-54-32-835| [ KERNEL] [ 0.016261] NET: Registered protocol family 16
07-54-32-835| [ KERNEL] [ 0.018228] DMA: preallocated 1024 KiB pool for atomic coherent allocations
07-54-32-835| [ KERNEL] [ 0.020143] Serial: AMBA PL011 UART driver
07-54-32-835| [ KERNEL] [ 0.022027] bcm2835-mbox fe00b880.mailbox: mailbox enabled
07-54-32-835| [ KERNEL] [ 0.040634] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-08-19 17:38, variant start
07-54-32-835| [ KERNEL] [ 0.050628] raspberrypi-firmware soc:firmware: Firmware hash is e90cba19a98a0d1f2ef086b9cafcbca00778f094
07-54-32-835| [ KERNEL] [ 0.096170] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
07-54-32-835| [ KERNEL] [ 0.099160] vgaarb: loaded
07-54-32-835| [ KERNEL] [ 0.099649] usbcore: registered new interface driver usbfs
07-54-32-835| [ KERNEL] [ 0.099734] usbcore: registered new interface driver hub
07-54-32-835| [ KERNEL] [ 0.099804] usbcore: registered new device driver usb
07-54-32-835| [ KERNEL] [ 0.101346] clocksource: Switched to clocksource arch_sys_counter
07-54-32-835| [ KERNEL] [ 0.111642] thermal_sys: Registered thermal governor 'step_wise'
07-54-32-835| [ KERNEL] [ 0.112003] NET: Registered protocol family 2
07-54-32-835| [ KERNEL] [ 0.112422] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
07-54-32-835| [ KERNEL] [ 0.112446] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
07-54-32-835| [ KERNEL] [ 0.112495] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
07-54-32-835| [ KERNEL] [ 0.112557] TCP: Hash tables configured (established 8192 bind 8192)
07-54-32-835| [ KERNEL] [ 0.112658] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
07-54-32-835| [ KERNEL] [ 0.112687] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
07-54-32-835| [ KERNEL] [ 0.112814] NET: Registered protocol family 1
07-54-32-835| [ KERNEL] [ 0.112841] PCI: CLS 0 bytes, default 64
07-54-32-835| [ KERNEL] [ 0.824397] Initialise system trusted keyrings
07-54-32-835| [ KERNEL] [ 0.824526] workingset: timestamp_bits=30 max_order=20 bucket_order=0
07-54-32-835| [ KERNEL] [ 0.867116] Key type asymmetric registered
07-54-32-835| [ KERNEL] [ 0.867125] Asymmetric key parser 'x509' registered
07-54-32-835| [ KERNEL] [ 0.867189] bounce: pool size: 64 pages
07-54-32-835| [ KERNEL] [ 0.867245] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
07-54-32-835| [ KERNEL] [ 0.869433] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
07-54-32-835| [ KERNEL] [ 0.869449] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
07-54-32-835| [ KERNEL] [ 0.869477] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff -> 0x00f8000000
07-54-32-835| [ KERNEL] [ 0.869507] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0000000000
07-54-32-835| [ KERNEL] [ 0.923459] brcm-pcie fd500000.pcie: link up, 5 GT/s x1 (SSC)
07-54-32-835| [ KERNEL] [ 0.923683] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
07-54-32-835| [ KERNEL] [ 0.923696] pci_bus 0000:00: root bus resource [bus 00-ff]
07-54-32-835| [ KERNEL] [ 0.923710] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
07-54-32-835| [ KERNEL] [ 0.923745] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
07-54-32-835| [ KERNEL] [ 0.923850] pci 0000:00:00.0: PME# supported from D0 D3hot
07-54-32-835| [ KERNEL] [ 0.926572] PCI: bus0: Fast back to back transfers disabled
07-54-32-835| [ KERNEL] [ 0.926748] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
07-54-32-835| [ KERNEL] [ 0.926857] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
07-54-32-835| [ KERNEL] [ 0.927133] pci 0000:01:00.0: PME# supported from D0 D3cold
07-54-32-835| [ KERNEL] [ 0.929855] PCI: bus1: Fast back to back transfers disabled
07-54-32-835| [ KERNEL] [ 0.929894] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
07-54-32-835| [ KERNEL] [ 0.929910] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
07-54-32-835| [ KERNEL] [ 0.929970] pci 0000:00:00.0: PCI bridge to [bus 01]
07-54-32-835| [ KERNEL] [ 0.929982] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
07-54-32-835| [ KERNEL] [ 0.930145] pcieport 0000:00:00.0: enabling device (0140 -> 0142)
07-54-32-835| [ KERNEL] [ 0.930294] pcieport 0000:00:00.0: PME: Signaling with IRQ 53
07-54-32-835| [ KERNEL] [ 0.930550] pcieport 0000:00:00.0: AER: enabled with IRQ 53
07-54-32-835| [ KERNEL] [ 0.930836] pci 0000:01:00.0: enabling device (0140 -> 0142)
07-54-32-835| [ KERNEL] [ 0.931362] bcm2708_fb soc:fb: FB found 1 display(s)
07-54-32-835| [ KERNEL] [ 0.956199] Console: switching to colour frame buffer device 240x67
07-54-32-835| [ KERNEL] [ 0.962305] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1920x1080
07-54-32-835| [ KERNEL] [ 0.965841] iproc-rng200 fe104000.rng: hwrng registered
07-54-32-835| [ KERNEL] [ 0.966003] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
07-54-32-835| [ KERNEL] [ 0.966434] vc-sm: Videocore shared memory driver
07-54-32-835| [ KERNEL] [ 0.966809] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
07-54-32-835| [ KERNEL] [ 0.967583] zram: Added device: zram0
07-54-32-835| [ KERNEL] [ 0.969280] libphy: Fixed MDIO Bus: probed
07-54-32-835| [ KERNEL] [ 0.969637] xhci_hcd 0000:01:00.0: xHCI Host Controller
07-54-32-835| [ KERNEL] [ 0.969675] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
07-54-32-835| [ KERNEL] [ 0.975174] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000003000000890
07-54-32-835| [ KERNEL] [ 0.975674] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
07-54-32-835| [ KERNEL] [ 0.975687] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
07-54-32-835| [ KERNEL] [ 0.975696] usb usb1: Product: xHCI Host Controller
07-54-32-835| [ KERNEL] [ 0.975705] usb usb1: Manufacturer: Linux 5.4.83-v7l xhci-hcd
07-54-32-835| [ KERNEL] [ 0.975713] usb usb1: SerialNumber: 0000:01:00.0
07-54-32-835| [ KERNEL] [ 0.976191] hub 1-0:1.0: USB hub found
07-54-32-835| [ KERNEL] [ 0.976272] hub 1-0:1.0: 1 port detected
07-54-32-835| [ KERNEL] [ 0.976698] xhci_hcd 0000:01:00.0: xHCI Host Controller
07-54-32-835| [ KERNEL] [ 0.976717] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
07-54-32-835| [ KERNEL] [ 0.976734] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
07-54-32-835| [ KERNEL] [ 0.977038] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
07-54-32-835| [ KERNEL] [ 0.977052] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
07-54-32-835| [ KERNEL] [ 0.977065] usb usb2: Product: xHCI Host Controller
07-54-32-835| [ KERNEL] [ 0.977074] usb usb2: Manufacturer: Linux 5.4.83-v7l xhci-hcd
07-54-32-835| [ KERNEL] [ 0.977082] usb usb2: SerialNumber: 0000:01:00.0
07-54-32-835| [ KERNEL] [ 0.977557] hub 2-0:1.0: USB hub found
07-54-32-835| [ KERNEL] [ 0.977615] hub 2-0:1.0: 4 ports detected
07-54-32-835| [ KERNEL] [ 0.978583] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
07-54-32-835| [ KERNEL] [ 0.978685] dwc_otg: FIQ enabled
07-54-32-835| [ KERNEL] [ 0.978691] dwc_otg: NAK holdoff enabled
07-54-32-835| [ KERNEL] [ 0.978697] dwc_otg: FIQ split-transaction FSM enabled
07-54-32-835| [ KERNEL] [ 0.978705] Module dwc_common_port init
07-54-32-835| [ KERNEL] [ 0.983628] usbcore: registered new interface driver usbtouchscreen
07-54-32-835| [ KERNEL] [ 0.985144] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
07-54-32-835| [ KERNEL] [ 0.986348] sdhci: Secure Digital Host Controller Interface driver
07-54-32-835| [ KERNEL] [ 0.986356] sdhci: Copyright(c) Pierre Ossman
07-54-32-835| [ KERNEL] [ 0.986691] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
07-54-32-835| [ KERNEL] [ 0.986927] sdhci-pltfm: SDHCI platform and OF driver helper
07-54-32-835| [ KERNEL] [ 0.987685] hidraw: raw HID events driver (C) Jiri Kosina
07-54-32-835| [ KERNEL] [ 0.988569] usbcore: registered new interface driver usbhid
07-54-32-835| [ KERNEL] [ 0.988575] usbhid: USB HID core driver
07-54-32-835| [ KERNEL] [ 0.990420] vchiq: vchiq_init_state: slot_zero = (ptrval)
07-54-32-835| [ KERNEL] [ 0.996052] [vc_sm_connected_init]: start
07-54-32-835| [ KERNEL] [ 1.009768] [vc_sm_connected_init]: end - returning 0
07-54-32-835| [ KERNEL] [ 1.010364] NET: Registered protocol family 17
07-54-32-835| [ KERNEL] [ 1.010490] Registering SWP/SWPB emulation handler
07-54-32-835| [ KERNEL] [ 1.010583] Loading compiled-in X.509 certificates
07-54-32-835| [ KERNEL] [ 1.011424] uart-pl011 fe201000.serial: cts_event_workaround enabled
07-54-32-835| [ KERNEL] [ 1.011460] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 29, base_baud = 0) is a PL011 rev2
07-54-32-835| [ KERNEL] [ 1.015218] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
07-54-32-835| [ KERNEL] [ 1.015488] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
07-54-32-835| [ KERNEL] [ 1.015492] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
07-54-32-835| [ KERNEL] [ 1.065880] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
07-54-32-835| [ KERNEL] [ 1.067377] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
07-54-32-835| [ KERNEL] [ 1.068872] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
07-54-32-835| [ KERNEL] [ 1.071565] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
07-54-32-835| [ KERNEL] [ 1.073061] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
07-54-32-835| [ KERNEL] [ 1.081361] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
07-54-32-835| [ KERNEL] [ 1.081512] of_cfs_init
07-54-32-835| [ KERNEL] [ 1.081605] of_cfs_init: OK
07-54-32-835| [ KERNEL] [ 1.083723] Freeing unused kernel memory: 2048K
07-54-32-835| [ KERNEL] [ 1.109532] random: fast init done
07-54-32-835| [ KERNEL] [ 1.135710] mmc1: new high speed SDIO card at address 0001
07-54-32-835| [ KERNEL] [ 1.161512] Run /init as init process
07-54-32-835| [ KERNEL] [ 1.184104] mmc0: new ultra high speed DDR50 SDHC card at address aaaa
07-54-32-835| [ KERNEL] [ 1.184453] mmcblk0: mmc0:aaaa SC32G 29.7 GiB
07-54-32-835| [ KERNEL] [ 1.186078] mmcblk0: p1
07-54-32-835| [ KERNEL] [ 1.341392] usb 1-1: new high-speed USB device number 2 using xhci_hcd
07-54-32-835| [ pfac] [ 1.468675] Run /sbin/initrd.
07-54-32-835| [ pfac] [ 1.468852] Ok, PID 794.
07-54-32-835| [ initrd] [ 1.472950] WTware 6.0.30/RPi shell.
07-54-32-835| [ initrd] [ 1.473299] Load font 'ter-c32b.psf', console 120x33.
07-54-32-835| [ initrd] [ 1.489638] HDD/MMC/SD boot.
07-54-32-835| [ initrd] [ 1.489752] No device '/dev/fb1'.
07-54-32-835| [ KERNEL] [ 1.524026] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
07-54-32-835| [ KERNEL] [ 1.524037] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
07-54-32-835| [ KERNEL] [ 1.524046] usb 1-1: Product: USB2.0 Hub
07-54-32-835| [ KERNEL] [ 1.525497] hub 1-1:1.0: USB hub found
07-54-32-835| [ KERNEL] [ 1.525765] hub 1-1:1.0: 4 ports detected
07-54-32-835| [ initrd] [ 1.550274] Success: /dev/mmcblk0p1 mounted to /bootmedia.
07-54-32-835| /--- FILE "/bootmedia/config.txt" -----------------------
07-54-32-835| | # For more options and information see:
07-54-32-835| | #
07-54-32-835| | #
https://www.raspberrypi.org/documentati ... /README.md
07-54-32-835| | #
07-54-32-835| | # Some settings may impact device functionality. See link above for details.
07-54-32-835| | # Uncomment if you get no picture on HDMI for a default "safe" mode.
07-54-32-835| | #hdmi_safe=1
07-54-32-835| | # Uncomment this if your display has a black border of unused pixels visible
07-54-32-835| | # and your display can output without overscan.
07-54-32-835| | disable_overscan=1
07-54-32-835| | # Uncomment if hdmi display is not detected and composite is being output.
07-54-32-835| | #hdmi_force_hotplug=1
07-54-32-835| | # Uncomment to force a specific HDMI mode (this will force VGA).
07-54-32-835| | #hdmi_group=1
07-54-32-835| | #hdmi_mode=1
07-54-32-835| | # Force the monitor to HDMI mode so that sound will be sent over HDMI cable.
07-54-32-835| | #hdmi_drive=2
07-54-32-835| | # Uncomment to increase signal to HDMI, if you have interference, blanking, or
07-54-32-835| | # no display.
07-54-32-835| | #config_hdmi_boost=4
07-54-32-835| | # Uncomment to overclock the arm. 700 MHz is the default.
07-54-32-835| | #arm_freq=800
07-54-32-835| | disable_splash=1
07-54-32-835| | framebuffer_depth=32
07-54-32-835| | # Uncomment for 16-bit color.
07-54-32-835| | #framebuffer_depth=16
07-54-32-835| | # Enable onboard audio (HDMI or jack).
07-54-32-835| | dtparam=audio=on
07-54-32-835| | # Removes the warning overlay.
07-54-32-835| | #avoid_warnings=1
07-54-32-835| | # Additionally allows turbo when low-voltage is present.
07-54-32-835| | #avoid_warnings=2
07-54-32-835| | [pi4]
07-54-32-835| | max_framebuffers=2
07-54-32-835| | [all]
07-54-32-835| | # Uncomment these two lines to set display resolution:
07-54-32-835| | #hdmi_group=2
07-54-32-835| | #hdmi_mode=58
07-54-32-835| | #
07-54-32-835| | # Specify correct value in hdmi_mode= line from the list of valid values:
07-54-32-835| | # 800x600: hdmi_mode=9
07-54-32-835| | # 1024x768: hdmi_mode=16
07-54-32-835| | # 1280x1024: hdmi_mode=35
07-54-32-835| | # 1360x768: hdmi_mode=39
07-54-32-835| | # 1400x1050: hdmi_mode=42
07-54-32-835| | # 1440x900: hdmi_mode=47
07-54-32-835| | # 1600x1200: hdmi_mode=51
07-54-32-835| | # 1680x1050: hdmi_mode=58
07-54-32-835| | # 1366x768: hdmi_mode=81
07-54-32-835| | # 1920x1080: hdmi_mode=82
07-54-32-835| | # 1920x1200: hdmi_mode=69
07-54-32-835| | #
07-54-32-835| | # Find more resolutions in manual:
07-54-32-835| | #
https://www.raspberrypi.org/documentati ... t/video.md
07-54-32-835| | #
07-54-32-835| | # Uncomment six lines with such syntax and right hdmi_mode= values for
07-54-32-835| | # dual displays on Raspberry Pi 4:
07-54-32-835| | #
07-54-32-835| | #[HDMI:0]
07-54-32-835| | # hdmi_group=2
07-54-32-835| | # hdmi_mode=42
07-54-32-835| | #[HDMI:1]
07-54-32-835| | # hdmi_group=2
07-54-32-835| | # hdmi_mode=58
07-54-32-835| | hdmi_group=2
07-54-32-835| | hdmi_mode=82
07-54-32-835| | framebuffer_depth=16
07-54-32-835| \----------------------------------------------------
07-54-32-835| /--- FILE "/bootmedia/configs/initrd.wtc" -----------------------
07-54-32-835| | clientIP = *
07-54-32-835| | config = local
07-54-32-835| \----------------------------------------------------
07-54-32-835| [ initrd] [ 1.577335] Do not cache package files.
07-54-32-835| [ initrd] [ 1.577394] WTpassword empty.
07-54-32-835| [ initrd] [ 1.577444] Unpack /bootmedia/packages/pi2-lib.
07-54-32-835| [ KERNEL] [ 1.851367] usb 1-1.2: new full-speed USB device number 3 using xhci_hcd
07-54-32-835| [ KERNEL] [ 2.010392] usb 1-1.2: New USB device found, idVendor=0a5f, idProduct=0085, bcdDevice=17.17
07-54-32-835| [ KERNEL] [ 2.010398] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
07-54-32-835| [ KERNEL] [ 2.010402] usb 1-1.2: Product: ZTC GX420t
07-54-32-835| [ KERNEL] [ 2.010405] usb 1-1.2: Manufacturer: Zebra Technologies
07-54-32-835| [ KERNEL] [ 2.010409] usb 1-1.2: SerialNumber: 31J163000415
07-54-32-835| [ KERNEL] [ 2.111381] usb 1-1.4: new full-speed USB device number 4 using xhci_hcd
07-54-32-835| [ initrd] [ 2.164023] USB: 2109:3431 VIA Labs, Inc. Hub.
07-54-32-835| [ initrd] [ 2.164076] USB: 0a5f:0085 Zebra.
07-54-32-835| [ initrd] [ 2.164125] Load Ethernet drivers.
07-54-32-835| [ initrd] [ 2.164168] modprobe genet.
07-54-32-835| [ KERNEL] [ 2.168736] bcmgenet fd580000.ethernet: failed to get enet clock
07-54-32-835| [ KERNEL] [ 2.168743] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
07-54-32-835| [ KERNEL] [ 2.168748] bcmgenet fd580000.ethernet: failed to get enet-wol clock
07-54-32-835| [ KERNEL] [ 2.168753] bcmgenet fd580000.ethernet: failed to get enet-eee clock
07-54-32-835| [ KERNEL] [ 2.168767] bcmgenet: Skipping UMAC reset
07-54-32-835| [ KERNEL] [ 2.181345] libphy: bcmgenet MII bus: probed
07-54-32-835| [ KERNEL] [ 2.259063] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.01
07-54-32-835| [ KERNEL] [ 2.259074] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
07-54-32-835| [ KERNEL] [ 2.259081] usb 1-1.4: Product: USB Receiver
07-54-32-835| [ KERNEL] [ 2.259089] usb 1-1.4: Manufacturer: Logitech
07-54-32-835| [ KERNEL] [ 2.281421] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
07-54-32-835| [ KERNEL] [ 2.282433] logitech-djreceiver 0003:046D:C52B.0003: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:01:00.0-1.4/input2
07-54-32-835| [ KERNEL] [ 2.282586] bcmgenet: Skipping UMAC reset
07-54-32-835| [ KERNEL] [ 2.284135] bcmgenet fd580000.ethernet: configuring instance for external RGMII
07-54-32-835| [ KERNEL] [ 2.284605] bcmgenet fd580000.ethernet eth0: Link is Down
07-54-32-835| [ KERNEL] [ 2.436801] input: Logitech MX Master 2S as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0003/0003:046D:4069.0004/input/input0
07-54-32-835| [ KERNEL] [ 2.437676] logitech-hidpp-device 0003:046D:4069.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech MX Master 2S] on usb-0000:01:00.0-1.4/input2:1
07-54-32-835| [ KERNEL] [ 2.448425] input: Logitech K540/K545 as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0003/0003:046D:4076.0005/input/input1
07-54-32-835| [ KERNEL] [ 2.448819] logitech-hidpp-device 0003:046D:4076.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K540/K545] on usb-0000:01:00.0-1.4/input2:2
07-54-32-835| [ KERNEL] [ 7.511466] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
07-54-32-835| [ initrd] [ 7.591068] WTpassword empty.
07-54-32-835| [ initrd] [ 8.800151] dhcp: 387 bytes from 192.168.6.26.
07-54-32-835| [ initrd] [ 8.800255] 00000000:0000016F0000000000110000C0A8061AFFFFFFFF00430044016F000002010600 ...o...............C.D.o......
07-54-32-835| [ initrd] [ 8.800342] 00000020:67458B6B0000000000000000C0A8078FC0A8061A00000000DCA6327ED4E60000 gE.k.....................2~....
07-54-32-835| [ initrd] [ 8.800426] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
07-54-32-835| [ initrd] [ 8.800510] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
07-54-32-835| [ initrd] [ 8.800594] 00000080:0000000000000000000000000000000000000000000000000000000000000000 ................................
07-54-32-835| [ initrd] [ 8.800677] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................
07-54-32-835| [ initrd] [ 8.800761] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................
07-54-32-835| [ initrd] [ 8.800844] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................
07-54-32-835| [ initrd] [ 8.800928] 00000100:0000000000000000638253633501020104FFFFFE003A04000546003B0400093A ........c.Sc5........:...F.;...:
07-54-32-835| [ initrd] [ 8.801011] 00000120:803304000A8C003604C0A8061A0304C0A8062B060CC0A80611C0A8061AC0A806 .3.....6.........+...........
07-54-32-835| [ initrd] [ 9.970174] dhcp: 387 bytes from 192.168.6.26.
07-54-32-835| [ initrd] [ 9.970270] 00000000:0000016F0000000000110000C0A8061AFFFFFFFF00430044016F000002010600 ...o...............C.D.o......
07-54-32-835| [ initrd] [ 9.970356] 00000020:67458B6B0000000000000000C0A8078F0000000000000000DCA6327ED4E60000 gE.k......................2~....
07-54-32-835| [ initrd] [ 9.970440] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
07-54-32-835| [ initrd] [ 9.970523] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
07-54-32-835| [ initrd] [ 9.970607] 00000080:0000000000000000000000000000000000000000000000000000000000000000 ................................
07-54-32-835| [ initrd] [ 9.970689] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................
07-54-32-835| [ initrd] [ 9.970773] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................
07-54-32-835| [ initrd] [ 9.970870] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................
07-54-32-835| [ initrd] [ 9.970955] 00000100:0000000000000000638253633501053A04000546003B0400093A803304000A8C ........c.Sc5..:...F.;...:.3....
07-54-32-835| [ initrd] [ 9.971039] 00000120:003604C0A8061A0104FFFFFE000304C0A8062B060CC0A80611C0A8061AC0A806 .6...............+...........
07-54-32-835| [ initrd] [ 10.010090] [DHCP] DHCP server address 192.168.6.26.
07-54-32-835| [ initrd] [ 10.010181] [DHCP] IP 192.168.7.143 mask 255.255.254.0.
07-54-32-835| [ initrd] [ 10.010264] [DHCP] Default gateway 192.168.6.43.
07-54-32-835| [ initrd] [ 10.010347] [DHCP] DNS 192.168.6.17.
07-54-32-835| [ initrd] [ 10.010429] [DHCP] DNS 192.168.6.26.
07-54-32-835| [ initrd] [ 10.010512] [DHCP] DNS 192.168.6.27.
07-54-32-835| [ initrd] [ 10.010593] [DHCP] Domain HG.local.
07-54-32-835| [ initrd] [ 10.010674] [DHCP] TFTP from siaddr 192.168.6.26.
07-54-32-835| [ initrd] [ 10.010755] [DHCP] TFTP 192.168.6.26.
07-54-32-835| [ initrd] [ 10.010837] [DHCP] No boot file from DHCP.
07-54-32-835| [ initrd] [ 10.010918] [DHCP] TFTP binary "", configs prefix "", using "/" slash.
07-54-32-835| WTC listener is active.
07-54-32-835| WTC broadcast listener is active.
07-54-32-835| Send broadcast WTCU discover.
07-54-32-835| [ pfac] [ 10.012298] Run /sbin/httpd.
07-54-32-835| [ initrd] [ 10.012363] Run '/sbin/httpd', log '/tmp/httpd.out', env '', pid ''.
07-54-32-835| [ pfac] [ 10.012477] Ok, PID 864.
07-54-32-835| [ initrd] [ 10.012524] Copy /bootmedia/configs/config.wtc to /tmp/config.wtc.
07-54-32-835| [ initrd] [ 10.014101] /bootmedia/configs/config.wtc -> /tmp/config.wtc, 242 bytes copied.
07-54-32-835| [ initrd] [ 10.014219] Common local disk config:
07-54-32-835| /--- FILE "/tmp/config.wtc" -----------------------
07-54-32-835| | [BOM]
07-54-32-835| | server=192.168.6.24
07-54-32-835| | bpp=16
07-54-32-835| | display=1280x1024
07-54-32-835| | keyboard=de
07-54-32-835| | language=de,default
07-54-32-835| | printer=usb
07-54-32-835| | scanner=on
07-54-32-835| | connection
07-54-32-835| \----------------------------------------------------
07-54-32-835| /--- FILE "/etc/config.compiled" -----------------------
07-54-32-835| | [BOM]
07-54-32-835| | server=192.168.6.24
07-54-32-835| | bpp=16
07-54-32-835| | display=1280x1024
07-54-32-835| | keyboard=de
07-54-32-835| | language=de,default
07-54-32-835| | printer=usb
07-54-32-835| | scanner=on
07-54-32-835| | connection
07-54-32-835| \----------------------------------------------------
07-54-32-835| [ initrd] [ 10.015847] Hostname: "wtwDCA6327ED4E6".
07-54-32-835| [ httpd] [ 10.020760] Internal HTTP Server, WTware 6.0.30/RPi
07-54-32-835| [ initrd] [ 10.250235] [NTP] 42 DHCP option is not set.
07-54-32-835| Everyone can control terminal by RSH.
07-54-32-835| RSH: listener is active.
07-54-32-835| Send broadcast WTCU discover.
07-54-32-835| [ httpd] [ 10.254556] Reread settings.
07-54-32-835| [ initrd] [ 10.254663] Unpack /bootmedia/packages/print.
07-54-32-835| [ httpd] [ 10.254792] Everyone can control terminal by HTTP.
07-54-32-835| [ initrd] [ 10.338393] Unpack /bootmedia/packages/pi2-print.
07-54-32-835| [ initrd] [ 10.346358] Run '/sbin/printer 0 1 0 0 0 0000:0000', log '', env '', pid ''.
07-54-32-835| [ pfac] [ 10.346406] Run /sbin/printer 0 1 0 0 0 0000:0000.
07-54-32-835| [ pfac] [ 10.346530] Ok, PID 865.
07-54-32-835| [ initrd] [ 10.346579] Load usb printer driver.
07-54-32-835| [ initrd] [ 10.346625] modprobe usblp.
07-54-32-835| [ printer 0] [ 10.347719] Printserver, WTware 6.0.30/RPi.
07-54-32-835| [ printer 0] [ 10.347770] Printserver 0, device /dev/usb/lp0, listen at port 9100.
07-54-32-835| [ printer 0] [ 10.347813] Printer device not found. Waiting...
07-54-32-835| [ initrd] [ 10.355970] Unpack /bootmedia/packages/pi2-f.
07-54-32-835| [ KERNEL] [ 10.356894] usblp 1-1.2:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0085
07-54-32-835| [ KERNEL] [ 10.356955] usbcore: registered new interface driver usblp
07-54-32-835| [ KERNEL] [ 10.509746] random: crng init done
07-54-32-835| [ gm] [ 10.514071] WTware 6.0.30/RPi session manager.
07-54-32-835| [ gm] [ 10.514654] EV_REL flag found. Add event1: Logitech K540/K545.
07-54-32-835| [ gm] [ 10.514738] EV_REL flag found. Add event0: Logitech MX Master 2S.
07-54-32-835| [ gm] [ 10.514892] Display mode: 1920x1080, 16 bit, landscape, 0 Hz, modeline "", DDC enabled, connector 0.
07-54-32-835| [ gm] [ 10.800675] Framebuffer device found.
07-54-32-835| [ gm] [ 10.800747] LINELENBYTES 3840
07-54-32-835| [ gm] [ 10.800800] VLEN 4147200
07-54-32-835| [ gm] [ 10.802129] Use /lib/ui16.so.
07-54-32-835| [ gm] [ 10.816846] Unpack /bootmedia/packages/pi2-lstdcpp.
07-54-32-835| [ gm] [ 10.883702] Unpack /bootmedia/packages/pi2-xml2.
07-54-32-835| [ gm] [ 13.283052] Unpack /bootmedia/packages/pi2-dbus.
07-54-32-835| [ gm] [ 13.413774] +--- Executing "/usr/bin/dbus-uuidgen --ensure"
07-54-32-835| [ gm] [ 13.417782] +- Errorlevel: 0, output:
07-54-32-835| | <No output>
07-54-32-835| [ gm] [ 13.417937] +------------------------
07-54-32-835| [ gm] [ 13.417991] +--- Executing "/usr/bin/dbus-daemon --system "
07-54-32-835| [ gm] [ 13.431275] +- Errorlevel: 0, output:
07-54-32-835| | <No output>
07-54-32-835| [ gm] [ 13.431462] +------------------------
07-54-32-835| [ gm] [ 13.431521] Run '/usr/bin/dbus-daemon --session --address=unix:path=/run/user/1007/bus', log '', env '', pid ''.
07-54-32-835| [ pfac] [ 13.431786] Run /usr/bin/dbus-daemon --session --address=unix:path=/run/user/1007/bus.
07-54-32-835| [ pfac] [ 13.431843] Ok, PID 876.
07-54-32-835| [ gm] [ 13.432008] Unpack /bootmedia/packages/pi2-scan.
07-54-32-835| [ gm] [ 13.734627] Start saned: '/usr/local/sbin/saned -lD', environment is empty.
07-54-32-835| [ SYSLOG] [ 13.743179] <31>Jan 16 00:00:12 saned[877]: saned (IPv4 only) from sane-backends 1.0.31-237-gd46fbd9d7 starting up
07-54-32-835| [ SYSLOG] [ 13.744217] <31>Jan 16 00:00:12 saned[878]: Now daemonized
07-54-32-835| [ gm] [ 13.751949] Run '/sbin/resolver 0x1f91e60 dns [192.168.6.24]', log '', env '', pid ''.
07-54-32-835| [ pfac] [ 13.752228] Run /sbin/resolver 0x1f91e60 dns [192.168.6.24].
07-54-32-835| [ pfac] [ 13.752282] Ok, PID 879.
07-54-32-835| [ gm] [ 13.752371] Nobody can control terminal by VNC.
07-54-32-835| [ gm] [ 13.752431] Nobody can control terminal by WTRC.
07-54-32-835| [ pfac] [ 13.754942] Process pid 879 terminated, status 00000000.
07-54-32-835| [ gm] [ 13.755071] 192.168.6.24 => 192.168.6.24.
07-54-32-835| [ gm] [ 13.758600] Free ram before fork terminal client /sbin/rdpclient (session 1): 3843944 Kb.
07-54-32-835| [ gm] [ 13.758663] Run '/sbin/rdpclient 1', log '/tmp/rdpclient.out', env '', pid ''.
07-54-32-835| [ pfac] [ 13.758889] Run /sbin/rdpclient 1.
07-54-32-835| [ pfac] [ 13.758941] Ok, PID 880.
07-54-32-835| [ rdpclient 880] [ 13.764318] RDP Terminal Client, WTware 6.0.30/RPi, pipe 1, pid 880.
07-54-32-835| [ rdpclient 880] [ 13.764562] Use /lib/ui16.so.
07-54-32-835| [ rdpclient 880] [ 13.765448] Make RDP session with 192.168.6.24, port 3389.
07-54-32-835| [ rdpclient 880] [ 13.765527] No username.
07-54-32-835| [ rdpclient 880] [ 13.765586] No password.
07-54-32-835| [ rdpclient 880] [ 13.765626] No PIN.
07-54-32-835| [ rdpclient 880] [ 13.765664] No domain.
07-54-32-835| [ rdpclient 880] [ 13.765701] No shell.
07-54-32-835| [ rdpclient 880] [ 13.765739] No directory.
07-54-32-835| [ rdpclient 880] [ 13.765775] Window: 1856x1080@16.
07-54-32-835| [ rdpclient 880] [ 13.765818] PFlags 0x0000002F.
07-54-32-835| [ rdpclient 880] [ 13.765856] Keyboard 00000407:00000000.
07-54-32-835| [ rdpclient 880] [ 13.765893] My hostname "wtwDCA6327ED4E6".
07-54-32-835| [ rdpclient 880] [ 13.765931] TCP: connecting to 192.168.6.24:3389.
07-54-32-835| [ rdpclient 880] [ 13.766179] TCP: connection with 192.168.6.24:3389 established.
07-54-32-835| [ rdpclient 880] [ 13.766234] Turn keepalive on.
07-54-32-835| [ rdpclient 880] [ 13.767210] Free ram after buffers allocation: 3843188 KB.
07-54-32-835| [ rdpclient 880] [ 13.773988] Process RDP server certificate.
07-54-32-835| [ rdpclient 880] [ 13.774049] RDP5 encryption (X.509).
07-54-32-835| [ rdpclient 880] [ 13.776286] License: STATUS_VALID_CLIENT.
07-54-32-835| [ KERNEL] [ 21.558874] logitech-hidpp-device 0003:046D:4076.0005: HID++ 4.1 device connected.
07-54-32-835| [ rdpclient 880] [ 26.081686] LOGON_EX_LOGONERRORS: ErrorNotificationType 0xfffffffe, ErrorNotificationData 0x00000008.
07-54-32-835| [ rdpclient 880] [ 29.745144] SessionId 0x00000008: OHRA\serviceadmin.
07-54-32-835| [ KERNEL] [ 37.939171] logitech-hidpp-device 0003:046D:4069.0004: HID++ 4.5 device connected.
07-54-32-835| [ KERNEL] [ 61.921239] usb 1-1.4: USB disconnect, device number 4
07-54-32-835| [ gm] [ 62.030248] evdev.cpp ( 1325): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
07-54-32-835| [ gm] [ 62.030308] Close input device 'Logitech MX Master 2S', errno 19.
07-54-32-835| [ gm] [ 62.190470] evdev.cpp ( 1325): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
07-54-32-835| [ gm] [ 62.190619] Close input device 'Logitech K540/K545', errno 19.
07-54-32-836| Connection from wtc.exe at 192.168.6.123.
07-54-32-835| WTware 6.0.30/RPi supervisor.
07-54-32-835| [ KERNEL] [ 0.000000] Booting Linux on physical CPU 0x0
07-54-32-835| [ KERNEL] [ 0.000000] Linux version 5.4.83-v7l (aka@c22) (gcc version 8.3.0 (Debian 8.3.0-2)) #9 SMP Sat Jan 16 18:49:14 UTC 2021
07-54-32-835| [ KERNEL] [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d
07-54-32-835| [ KERNEL] [ 0.000000] CPU: div instructions available: patching division code
07-54-32-835| [ KERNEL] [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
07-54-32-835| [ KERNEL] [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.2
07-54-32-835| [ KERNEL] [ 0.000000] Memory policy: Data cache writealloc
07-54-32-835| [ KERNEL] [ 0.000000] Reserved memory: created CMA memory pool at 0x000000002ac00000, size 64 MiB
07-54-32-835| [ KERNEL] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
07-54-32-835| [ KERNEL] [ 0.000000] On node 0 totalpages: 1012736
07-54-32-835| [ KERNEL] [ 0.000000] DMA zone: 1920 pages used for memmap
07-54-32-835| [ KERNEL] [ 0.000000] DMA zone: 0 pages reserved
07-54-32-835| [ KERNEL] [ 0.000000] DMA zone: 196608 pages, LIFO batch:63
07-54-32-835| [ KERNEL] [ 0.000000] HighMem zone: 816128 pages, LIFO batch:63
07-54-32-835| [ KERNEL] [ 0.000000] percpu: Embedded 15 pages/cpu s29324 r8192 d23924 u61440
07-54-32-835| [ KERNEL] [ 0.000000] pcpu-alloc: s29324 r8192 d23924 u61440 alloc=15*4096
07-54-32-835| [ KERNEL] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
07-54-32-835| [ KERNEL] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1010816
07-54-32-835| [ KERNEL] [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=DC:A6:32:7E:D4:E6 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 no_setup dwc_otg.lpm_enable=0 quiet wtboot=mmc
07-54-32-835| [ KERNEL] [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
07-54-32-835| [ KERNEL] [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
07-54-32-835| [ KERNEL] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
07-54-32-835| [ KERNEL] [ 0.000000] software IO TLB: mapped [mem 0x244a0000-0x284a0000] (64MB)
07-54-32-835| [ KERNEL] [ 0.000000] Memory: 3867788K/4050944K available (6144K kernel code, 161K rwdata, 812K rodata, 2048K init, 375K bss, 117620K reserved, 65536K cma-reserved, 3264512K highmem)
07-54-32-835| [ KERNEL] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
07-54-32-835| [ KERNEL] [ 0.000000] rcu: Hierarchical RCU implementation.
07-54-32-835| [ KERNEL] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
07-54-32-835| [ KERNEL] [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
07-54-32-835| [ KERNEL] [ 0.000000] GIC: Using split EOI/Deactivate mode
07-54-32-835| [ KERNEL] [ 0.000000] random: get_random_bytes called from 0xc0a00b60 with crng_init=0
07-54-32-835| [ KERNEL] [ 0.000007] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
07-54-32-835| [ KERNEL] [ 0.000021] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
07-54-32-835| [ KERNEL] [ 0.000087] bcm2835: system timer (irq = 17)
07-54-32-835| [ KERNEL] [ 0.000624] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
07-54-32-835| [ KERNEL] [ 0.000639] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
07-54-32-835| [ KERNEL] [ 0.000654] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
07-54-32-835| [ KERNEL] [ 0.000665] Switching to timer-based delay loop, resolution 18ns
07-54-32-835| [ KERNEL] [ 0.000825] Console: colour dummy device 80x30
07-54-32-835| [ KERNEL] [ 0.000843] printk: console [tty0] enabled
07-54-32-835| [ KERNEL] [ 0.000878] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000)
07-54-32-835| [ KERNEL] [ 0.000890] pid_max: default: 32768 minimum: 301
07-54-32-835| [ KERNEL] [ 0.001017] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
07-54-32-835| [ KERNEL] [ 0.001032] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
07-54-32-835| [ KERNEL] [ 0.001556] CPU: Testing write buffer coherency: ok
07-54-32-835| [ KERNEL] [ 0.001817] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
07-54-32-835| [ KERNEL] [ 0.002192] Setting up static identity map for 0x200000 - 0x20003c
07-54-32-835| [ KERNEL] [ 0.002269] rcu: Hierarchical SRCU implementation.
07-54-32-835| [ KERNEL] [ 0.002528] smp: Bringing up secondary CPUs ...
07-54-32-835| [ KERNEL] [ 0.003103] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
07-54-32-835| [ KERNEL] [ 0.003750] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
07-54-32-835| [ KERNEL] [ 0.004373] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
07-54-32-835| [ KERNEL] [ 0.004449] smp: Brought up 1 node, 4 CPUs
07-54-32-835| [ KERNEL] [ 0.004458] SMP: Total of 4 processors activated (432.00 BogoMIPS).
07-54-32-835| [ KERNEL] [ 0.004464] CPU: All CPU(s) started in HYP mode.
07-54-32-835| [ KERNEL] [ 0.004470] CPU: Virtualization extensions available.
07-54-32-835| [ KERNEL] [ 0.004863] devtmpfs: initialized
07-54-32-835| [ KERNEL] [ 0.013679] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0
07-54-32-835| [ KERNEL] [ 0.013959] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
07-54-32-835| [ KERNEL] [ 0.013976] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
07-54-32-835| [ KERNEL] [ 0.015359] pinctrl core: initialized pinctrl subsystem
07-54-32-835| [ KERNEL] [ 0.016261] NET: Registered protocol family 16
07-54-32-835| [ KERNEL] [ 0.018228] DMA: preallocated 1024 KiB pool for atomic coherent allocations
07-54-32-835| [ KERNEL] [ 0.020143] Serial: AMBA PL011 UART driver
07-54-32-835| [ KERNEL] [ 0.022027] bcm2835-mbox fe00b880.mailbox: mailbox enabled
07-54-32-835| [ KERNEL] [ 0.040634] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-08-19 17:38, variant start
07-54-32-835| [ KERNEL] [ 0.050628] raspberrypi-firmware soc:firmware: Firmware hash is e90cba19a98a0d1f2ef086b9cafcbca00778f094
07-54-32-835| [ KERNEL] [ 0.096170] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
07-54-32-835| [ KERNEL] [ 0.099160] vgaarb: loaded
07-54-32-835| [ KERNEL] [ 0.099649] usbcore: registered new interface driver usbfs
07-54-32-835| [ KERNEL] [ 0.099734] usbcore: registered new interface driver hub
07-54-32-835| [ KERNEL] [ 0.099804] usbcore: registered new device driver usb
07-54-32-835| [ KERNEL] [ 0.101346] clocksource: Switched to clocksource arch_sys_counter
07-54-32-835| [ KERNEL] [ 0.111642] thermal_sys: Registered thermal governor 'step_wise'
07-54-32-835| [ KERNEL] [ 0.112003] NET: Registered protocol family 2
07-54-32-835| [ KERNEL] [ 0.112422] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
07-54-32-835| [ KERNEL] [ 0.112446] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
07-54-32-835| [ KERNEL] [ 0.112495] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
07-54-32-835| [ KERNEL] [ 0.112557] TCP: Hash tables configured (established 8192 bind 8192)
07-54-32-835| [ KERNEL] [ 0.112658] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
07-54-32-835| [ KERNEL] [ 0.112687] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
07-54-32-835| [ KERNEL] [ 0.112814] NET: Registered protocol family 1
07-54-32-835| [ KERNEL] [ 0.112841] PCI: CLS 0 bytes, default 64
07-54-32-835| [ KERNEL] [ 0.824397] Initialise system trusted keyrings
07-54-32-835| [ KERNEL] [ 0.824526] workingset: timestamp_bits=30 max_order=20 bucket_order=0
07-54-32-835| [ KERNEL] [ 0.867116] Key type asymmetric registered
07-54-32-835| [ KERNEL] [ 0.867125] Asymmetric key parser 'x509' registered
07-54-32-835| [ KERNEL] [ 0.867189] bounce: pool size: 64 pages
07-54-32-835| [ KERNEL] [ 0.867245] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
07-54-32-835| [ KERNEL] [ 0.869433] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
07-54-32-835| [ KERNEL] [ 0.869449] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
07-54-32-835| [ KERNEL] [ 0.869477] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff -> 0x00f8000000
07-54-32-835| [ KERNEL] [ 0.869507] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0000000000
07-54-32-835| [ KERNEL] [ 0.923459] brcm-pcie fd500000.pcie: link up, 5 GT/s x1 (SSC)
07-54-32-835| [ KERNEL] [ 0.923683] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
07-54-32-835| [ KERNEL] [ 0.923696] pci_bus 0000:00: root bus resource [bus 00-ff]
07-54-32-835| [ KERNEL] [ 0.923710] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
07-54-32-835| [ KERNEL] [ 0.923745] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
07-54-32-835| [ KERNEL] [ 0.923850] pci 0000:00:00.0: PME# supported from D0 D3hot
07-54-32-835| [ KERNEL] [ 0.926572] PCI: bus0: Fast back to back transfers disabled
07-54-32-835| [ KERNEL] [ 0.926748] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
07-54-32-835| [ KERNEL] [ 0.926857] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
07-54-32-835| [ KERNEL] [ 0.927133] pci 0000:01:00.0: PME# supported from D0 D3cold
07-54-32-835| [ KERNEL] [ 0.929855] PCI: bus1: Fast back to back transfers disabled
07-54-32-835| [ KERNEL] [ 0.929894] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
07-54-32-835| [ KERNEL] [ 0.929910] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
07-54-32-835| [ KERNEL] [ 0.929970] pci 0000:00:00.0: PCI bridge to [bus 01]
07-54-32-835| [ KERNEL] [ 0.929982] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
07-54-32-835| [ KERNEL] [ 0.930145] pcieport 0000:00:00.0: enabling device (0140 -> 0142)
07-54-32-835| [ KERNEL] [ 0.930294] pcieport 0000:00:00.0: PME: Signaling with IRQ 53
07-54-32-835| [ KERNEL] [ 0.930550] pcieport 0000:00:00.0: AER: enabled with IRQ 53
07-54-32-835| [ KERNEL] [ 0.930836] pci 0000:01:00.0: enabling device (0140 -> 0142)
07-54-32-835| [ KERNEL] [ 0.931362] bcm2708_fb soc:fb: FB found 1 display(s)
07-54-32-835| [ KERNEL] [ 0.956199] Console: switching to colour frame buffer device 240x67
07-54-32-835| [ KERNEL] [ 0.962305] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1920x1080
07-54-32-835| [ KERNEL] [ 0.965841] iproc-rng200 fe104000.rng: hwrng registered
07-54-32-835| [ KERNEL] [ 0.966003] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
07-54-32-835| [ KERNEL] [ 0.966434] vc-sm: Videocore shared memory driver
07-54-32-835| [ KERNEL] [ 0.966809] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
07-54-32-835| [ KERNEL] [ 0.967583] zram: Added device: zram0
07-54-32-835| [ KERNEL] [ 0.969280] libphy: Fixed MDIO Bus: probed
07-54-32-835| [ KERNEL] [ 0.969637] xhci_hcd 0000:01:00.0: xHCI Host Controller
07-54-32-835| [ KERNEL] [ 0.969675] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
07-54-32-835| [ KERNEL] [ 0.975174] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000003000000890
07-54-32-835| [ KERNEL] [ 0.975674] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
07-54-32-835| [ KERNEL] [ 0.975687] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
07-54-32-835| [ KERNEL] [ 0.975696] usb usb1: Product: xHCI Host Controller
07-54-32-835| [ KERNEL] [ 0.975705] usb usb1: Manufacturer: Linux 5.4.83-v7l xhci-hcd
07-54-32-835| [ KERNEL] [ 0.975713] usb usb1: SerialNumber: 0000:01:00.0
07-54-32-835| [ KERNEL] [ 0.976191] hub 1-0:1.0: USB hub found
07-54-32-835| [ KERNEL] [ 0.976272] hub 1-0:1.0: 1 port detected
07-54-32-835| [ KERNEL] [ 0.976698] xhci_hcd 0000:01:00.0: xHCI Host Controller
07-54-32-835| [ KERNEL] [ 0.976717] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
07-54-32-835| [ KERNEL] [ 0.976734] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
07-54-32-835| [ KERNEL] [ 0.977038] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
07-54-32-835| [ KERNEL] [ 0.977052] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
07-54-32-835| [ KERNEL] [ 0.977065] usb usb2: Product: xHCI Host Controller
07-54-32-835| [ KERNEL] [ 0.977074] usb usb2: Manufacturer: Linux 5.4.83-v7l xhci-hcd
07-54-32-835| [ KERNEL] [ 0.977082] usb usb2: SerialNumber: 0000:01:00.0
07-54-32-835| [ KERNEL] [ 0.977557] hub 2-0:1.0: USB hub found
07-54-32-835| [ KERNEL] [ 0.977615] hub 2-0:1.0: 4 ports detected
07-54-32-835| [ KERNEL] [ 0.978583] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
07-54-32-835| [ KERNEL] [ 0.978685] dwc_otg: FIQ enabled
07-54-32-835| [ KERNEL] [ 0.978691] dwc_otg: NAK holdoff enabled
07-54-32-835| [ KERNEL] [ 0.978697] dwc_otg: FIQ split-transaction FSM enabled
07-54-32-835| [ KERNEL] [ 0.978705] Module dwc_common_port init
07-54-32-835| [ KERNEL] [ 0.983628] usbcore: registered new interface driver usbtouchscreen
07-54-32-835| [ KERNEL] [ 0.985144] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
07-54-32-835| [ KERNEL] [ 0.986348] sdhci: Secure Digital Host Controller Interface driver
07-54-32-835| [ KERNEL] [ 0.986356] sdhci: Copyright(c) Pierre Ossman
07-54-32-835| [ KERNEL] [ 0.986691] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
07-54-32-835| [ KERNEL] [ 0.986927] sdhci-pltfm: SDHCI platform and OF driver helper
07-54-32-835| [ KERNEL] [ 0.987685] hidraw: raw HID events driver (C) Jiri Kosina
07-54-32-835| [ KERNEL] [ 0.988569] usbcore: registered new interface driver usbhid
07-54-32-835| [ KERNEL] [ 0.988575] usbhid: USB HID core driver
07-54-32-835| [ KERNEL] [ 0.990420] vchiq: vchiq_init_state: slot_zero = (ptrval)
07-54-32-835| [ KERNEL] [ 0.996052] [vc_sm_connected_init]: start
07-54-32-835| [ KERNEL] [ 1.009768] [vc_sm_connected_init]: end - returning 0
07-54-32-835| [ KERNEL] [ 1.010364] NET: Registered protocol family 17
07-54-32-835| [ KERNEL] [ 1.010490] Registering SWP/SWPB emulation handler
07-54-32-835| [ KERNEL] [ 1.010583] Loading compiled-in X.509 certificates
07-54-32-835| [ KERNEL] [ 1.011424] uart-pl011 fe201000.serial: cts_event_workaround enabled
07-54-32-835| [ KERNEL] [ 1.011460] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 29, base_baud = 0) is a PL011 rev2
07-54-32-835| [ KERNEL] [ 1.015218] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
07-54-32-835| [ KERNEL] [ 1.015488] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
07-54-32-835| [ KERNEL] [ 1.015492] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
07-54-32-835| [ KERNEL] [ 1.065880] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
07-54-32-835| [ KERNEL] [ 1.067377] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
07-54-32-835| [ KERNEL] [ 1.068872] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
07-54-32-835| [ KERNEL] [ 1.071565] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
07-54-32-835| [ KERNEL] [ 1.073061] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
07-54-32-835| [ KERNEL] [ 1.081361] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
07-54-32-835| [ KERNEL] [ 1.081512] of_cfs_init
07-54-32-835| [ KERNEL] [ 1.081605] of_cfs_init: OK
07-54-32-835| [ KERNEL] [ 1.083723] Freeing unused kernel memory: 2048K
07-54-32-835| [ KERNEL] [ 1.109532] random: fast init done
07-54-32-835| [ KERNEL] [ 1.135710] mmc1: new high speed SDIO card at address 0001
07-54-32-835| [ KERNEL] [ 1.161512] Run /init as init process
07-54-32-835| [ KERNEL] [ 1.184104] mmc0: new ultra high speed DDR50 SDHC card at address aaaa
07-54-32-835| [ KERNEL] [ 1.184453] mmcblk0: mmc0:aaaa SC32G 29.7 GiB
07-54-32-835| [ KERNEL] [ 1.186078] mmcblk0: p1
07-54-32-835| [ KERNEL] [ 1.341392] usb 1-1: new high-speed USB device number 2 using xhci_hcd
07-54-32-835| [ pfac] [ 1.468675] Run /sbin/initrd.
07-54-32-835| [ pfac] [ 1.468852] Ok, PID 794.
07-54-32-835| [ initrd] [ 1.472950] WTware 6.0.30/RPi shell.
07-54-32-835| [ initrd] [ 1.473299] Load font 'ter-c32b.psf', console 120x33.
07-54-32-835| [ initrd] [ 1.489638] HDD/MMC/SD boot.
07-54-32-835| [ initrd] [ 1.489752] No device '/dev/fb1'.
07-54-32-835| [ KERNEL] [ 1.524026] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
07-54-32-835| [ KERNEL] [ 1.524037] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
07-54-32-835| [ KERNEL] [ 1.524046] usb 1-1: Product: USB2.0 Hub
07-54-32-835| [ KERNEL] [ 1.525497] hub 1-1:1.0: USB hub found
07-54-32-835| [ KERNEL] [ 1.525765] hub 1-1:1.0: 4 ports detected
07-54-32-835| [ initrd] [ 1.550274] Success: /dev/mmcblk0p1 mounted to /bootmedia.
07-54-32-835| /--- FILE "/bootmedia/config.txt" -----------------------
07-54-32-835| | # For more options and information see:
07-54-32-835| | #
07-54-32-835| | # https://www.raspberrypi.org/documentation/configuration/config-txt/README.md
07-54-32-835| | #
07-54-32-835| | # Some settings may impact device functionality. See link above for details.
07-54-32-835| | # Uncomment if you get no picture on HDMI for a default "safe" mode.
07-54-32-835| | #hdmi_safe=1
07-54-32-835| | # Uncomment this if your display has a black border of unused pixels visible
07-54-32-835| | # and your display can output without overscan.
07-54-32-835| | disable_overscan=1
07-54-32-835| | # Uncomment if hdmi display is not detected and composite is being output.
07-54-32-835| | #hdmi_force_hotplug=1
07-54-32-835| | # Uncomment to force a specific HDMI mode (this will force VGA).
07-54-32-835| | #hdmi_group=1
07-54-32-835| | #hdmi_mode=1
07-54-32-835| | # Force the monitor to HDMI mode so that sound will be sent over HDMI cable.
07-54-32-835| | #hdmi_drive=2
07-54-32-835| | # Uncomment to increase signal to HDMI, if you have interference, blanking, or
07-54-32-835| | # no display.
07-54-32-835| | #config_hdmi_boost=4
07-54-32-835| | # Uncomment to overclock the arm. 700 MHz is the default.
07-54-32-835| | #arm_freq=800
07-54-32-835| | disable_splash=1
07-54-32-835| | framebuffer_depth=32
07-54-32-835| | # Uncomment for 16-bit color.
07-54-32-835| | #framebuffer_depth=16
07-54-32-835| | # Enable onboard audio (HDMI or jack).
07-54-32-835| | dtparam=audio=on
07-54-32-835| | # Removes the warning overlay.
07-54-32-835| | #avoid_warnings=1
07-54-32-835| | # Additionally allows turbo when low-voltage is present.
07-54-32-835| | #avoid_warnings=2
07-54-32-835| | [pi4]
07-54-32-835| | max_framebuffers=2
07-54-32-835| | [all]
07-54-32-835| | # Uncomment these two lines to set display resolution:
07-54-32-835| | #hdmi_group=2
07-54-32-835| | #hdmi_mode=58
07-54-32-835| | #
07-54-32-835| | # Specify correct value in hdmi_mode= line from the list of valid values:
07-54-32-835| | # 800x600: hdmi_mode=9
07-54-32-835| | # 1024x768: hdmi_mode=16
07-54-32-835| | # 1280x1024: hdmi_mode=35
07-54-32-835| | # 1360x768: hdmi_mode=39
07-54-32-835| | # 1400x1050: hdmi_mode=42
07-54-32-835| | # 1440x900: hdmi_mode=47
07-54-32-835| | # 1600x1200: hdmi_mode=51
07-54-32-835| | # 1680x1050: hdmi_mode=58
07-54-32-835| | # 1366x768: hdmi_mode=81
07-54-32-835| | # 1920x1080: hdmi_mode=82
07-54-32-835| | # 1920x1200: hdmi_mode=69
07-54-32-835| | #
07-54-32-835| | # Find more resolutions in manual:
07-54-32-835| | # https://www.raspberrypi.org/documentation/configuration/config-txt/video.md
07-54-32-835| | #
07-54-32-835| | # Uncomment six lines with such syntax and right hdmi_mode= values for
07-54-32-835| | # dual displays on Raspberry Pi 4:
07-54-32-835| | #
07-54-32-835| | #[HDMI:0]
07-54-32-835| | # hdmi_group=2
07-54-32-835| | # hdmi_mode=42
07-54-32-835| | #[HDMI:1]
07-54-32-835| | # hdmi_group=2
07-54-32-835| | # hdmi_mode=58
07-54-32-835| | hdmi_group=2
07-54-32-835| | hdmi_mode=82
07-54-32-835| | framebuffer_depth=16
07-54-32-835| \----------------------------------------------------
07-54-32-835| /--- FILE "/bootmedia/configs/initrd.wtc" -----------------------
07-54-32-835| | clientIP = *
07-54-32-835| | config = local
07-54-32-835| \----------------------------------------------------
07-54-32-835| [ initrd] [ 1.577335] Do not cache package files.
07-54-32-835| [ initrd] [ 1.577394] WTpassword empty.
07-54-32-835| [ initrd] [ 1.577444] Unpack /bootmedia/packages/pi2-lib.
07-54-32-835| [ KERNEL] [ 1.851367] usb 1-1.2: new full-speed USB device number 3 using xhci_hcd
07-54-32-835| [ KERNEL] [ 2.010392] usb 1-1.2: New USB device found, idVendor=0a5f, idProduct=0085, bcdDevice=17.17
07-54-32-835| [ KERNEL] [ 2.010398] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
07-54-32-835| [ KERNEL] [ 2.010402] usb 1-1.2: Product: ZTC GX420t
07-54-32-835| [ KERNEL] [ 2.010405] usb 1-1.2: Manufacturer: Zebra Technologies
07-54-32-835| [ KERNEL] [ 2.010409] usb 1-1.2: SerialNumber: 31J163000415
07-54-32-835| [ KERNEL] [ 2.111381] usb 1-1.4: new full-speed USB device number 4 using xhci_hcd
07-54-32-835| [ initrd] [ 2.164023] USB: 2109:3431 VIA Labs, Inc. Hub.
07-54-32-835| [ initrd] [ 2.164076] USB: 0a5f:0085 Zebra.
07-54-32-835| [ initrd] [ 2.164125] Load Ethernet drivers.
07-54-32-835| [ initrd] [ 2.164168] modprobe genet.
07-54-32-835| [ KERNEL] [ 2.168736] bcmgenet fd580000.ethernet: failed to get enet clock
07-54-32-835| [ KERNEL] [ 2.168743] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
07-54-32-835| [ KERNEL] [ 2.168748] bcmgenet fd580000.ethernet: failed to get enet-wol clock
07-54-32-835| [ KERNEL] [ 2.168753] bcmgenet fd580000.ethernet: failed to get enet-eee clock
07-54-32-835| [ KERNEL] [ 2.168767] bcmgenet: Skipping UMAC reset
07-54-32-835| [ KERNEL] [ 2.181345] libphy: bcmgenet MII bus: probed
07-54-32-835| [ KERNEL] [ 2.259063] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.01
07-54-32-835| [ KERNEL] [ 2.259074] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
07-54-32-835| [ KERNEL] [ 2.259081] usb 1-1.4: Product: USB Receiver
07-54-32-835| [ KERNEL] [ 2.259089] usb 1-1.4: Manufacturer: Logitech
07-54-32-835| [ KERNEL] [ 2.281421] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
07-54-32-835| [ KERNEL] [ 2.282433] logitech-djreceiver 0003:046D:C52B.0003: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:01:00.0-1.4/input2
07-54-32-835| [ KERNEL] [ 2.282586] bcmgenet: Skipping UMAC reset
07-54-32-835| [ KERNEL] [ 2.284135] bcmgenet fd580000.ethernet: configuring instance for external RGMII
07-54-32-835| [ KERNEL] [ 2.284605] bcmgenet fd580000.ethernet eth0: Link is Down
07-54-32-835| [ KERNEL] [ 2.436801] input: Logitech MX Master 2S as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0003/0003:046D:4069.0004/input/input0
07-54-32-835| [ KERNEL] [ 2.437676] logitech-hidpp-device 0003:046D:4069.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech MX Master 2S] on usb-0000:01:00.0-1.4/input2:1
07-54-32-835| [ KERNEL] [ 2.448425] input: Logitech K540/K545 as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0003/0003:046D:4076.0005/input/input1
07-54-32-835| [ KERNEL] [ 2.448819] logitech-hidpp-device 0003:046D:4076.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K540/K545] on usb-0000:01:00.0-1.4/input2:2
07-54-32-835| [ KERNEL] [ 7.511466] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
07-54-32-835| [ initrd] [ 7.591068] WTpassword empty.
07-54-32-835| [ initrd] [ 8.800151] dhcp: 387 bytes from 192.168.6.26.
07-54-32-835| [ initrd] [ 8.800255] 00000000:0000016F0000000000110000C0A8061AFFFFFFFF00430044016F000002010600 ...o...............C.D.o......
07-54-32-835| [ initrd] [ 8.800342] 00000020:67458B6B0000000000000000C0A8078FC0A8061A00000000DCA6327ED4E60000 gE.k.....................2~....
07-54-32-835| [ initrd] [ 8.800426] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
07-54-32-835| [ initrd] [ 8.800510] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
07-54-32-835| [ initrd] [ 8.800594] 00000080:0000000000000000000000000000000000000000000000000000000000000000 ................................
07-54-32-835| [ initrd] [ 8.800677] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................
07-54-32-835| [ initrd] [ 8.800761] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................
07-54-32-835| [ initrd] [ 8.800844] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................
07-54-32-835| [ initrd] [ 8.800928] 00000100:0000000000000000638253633501020104FFFFFE003A04000546003B0400093A ........c.Sc5........:...F.;...:
07-54-32-835| [ initrd] [ 8.801011] 00000120:803304000A8C003604C0A8061A0304C0A8062B060CC0A80611C0A8061AC0A806 .3.....6.........+...........
07-54-32-835| [ initrd] [ 9.970174] dhcp: 387 bytes from 192.168.6.26.
07-54-32-835| [ initrd] [ 9.970270] 00000000:0000016F0000000000110000C0A8061AFFFFFFFF00430044016F000002010600 ...o...............C.D.o......
07-54-32-835| [ initrd] [ 9.970356] 00000020:67458B6B0000000000000000C0A8078F0000000000000000DCA6327ED4E60000 gE.k......................2~....
07-54-32-835| [ initrd] [ 9.970440] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
07-54-32-835| [ initrd] [ 9.970523] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
07-54-32-835| [ initrd] [ 9.970607] 00000080:0000000000000000000000000000000000000000000000000000000000000000 ................................
07-54-32-835| [ initrd] [ 9.970689] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................
07-54-32-835| [ initrd] [ 9.970773] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................
07-54-32-835| [ initrd] [ 9.970870] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................
07-54-32-835| [ initrd] [ 9.970955] 00000100:0000000000000000638253633501053A04000546003B0400093A803304000A8C ........c.Sc5..:...F.;...:.3....
07-54-32-835| [ initrd] [ 9.971039] 00000120:003604C0A8061A0104FFFFFE000304C0A8062B060CC0A80611C0A8061AC0A806 .6...............+...........
07-54-32-835| [ initrd] [ 10.010090] [DHCP] DHCP server address 192.168.6.26.
07-54-32-835| [ initrd] [ 10.010181] [DHCP] IP 192.168.7.143 mask 255.255.254.0.
07-54-32-835| [ initrd] [ 10.010264] [DHCP] Default gateway 192.168.6.43.
07-54-32-835| [ initrd] [ 10.010347] [DHCP] DNS 192.168.6.17.
07-54-32-835| [ initrd] [ 10.010429] [DHCP] DNS 192.168.6.26.
07-54-32-835| [ initrd] [ 10.010512] [DHCP] DNS 192.168.6.27.
07-54-32-835| [ initrd] [ 10.010593] [DHCP] Domain HG.local.
07-54-32-835| [ initrd] [ 10.010674] [DHCP] TFTP from siaddr 192.168.6.26.
07-54-32-835| [ initrd] [ 10.010755] [DHCP] TFTP 192.168.6.26.
07-54-32-835| [ initrd] [ 10.010837] [DHCP] No boot file from DHCP.
07-54-32-835| [ initrd] [ 10.010918] [DHCP] TFTP binary "", configs prefix "", using "/" slash.
07-54-32-835| WTC listener is active.
07-54-32-835| WTC broadcast listener is active.
07-54-32-835| Send broadcast WTCU discover.
07-54-32-835| [ pfac] [ 10.012298] Run /sbin/httpd.
07-54-32-835| [ initrd] [ 10.012363] Run '/sbin/httpd', log '/tmp/httpd.out', env '', pid ''.
07-54-32-835| [ pfac] [ 10.012477] Ok, PID 864.
07-54-32-835| [ initrd] [ 10.012524] Copy /bootmedia/configs/config.wtc to /tmp/config.wtc.
07-54-32-835| [ initrd] [ 10.014101] /bootmedia/configs/config.wtc -> /tmp/config.wtc, 242 bytes copied.
07-54-32-835| [ initrd] [ 10.014219] Common local disk config:
07-54-32-835| /--- FILE "/tmp/config.wtc" -----------------------
07-54-32-835| | [BOM]
07-54-32-835| | server=192.168.6.24
07-54-32-835| | bpp=16
07-54-32-835| | display=1280x1024
07-54-32-835| | keyboard=de
07-54-32-835| | language=de,default
07-54-32-835| | printer=usb
07-54-32-835| | scanner=on
07-54-32-835| | connection
07-54-32-835| \----------------------------------------------------
07-54-32-835| /--- FILE "/etc/config.compiled" -----------------------
07-54-32-835| | [BOM]
07-54-32-835| | server=192.168.6.24
07-54-32-835| | bpp=16
07-54-32-835| | display=1280x1024
07-54-32-835| | keyboard=de
07-54-32-835| | language=de,default
07-54-32-835| | printer=usb
07-54-32-835| | scanner=on
07-54-32-835| | connection
07-54-32-835| \----------------------------------------------------
07-54-32-835| [ initrd] [ 10.015847] Hostname: "wtwDCA6327ED4E6".
07-54-32-835| [ httpd] [ 10.020760] Internal HTTP Server, WTware 6.0.30/RPi
07-54-32-835| [ initrd] [ 10.250235] [NTP] 42 DHCP option is not set.
07-54-32-835| Everyone can control terminal by RSH.
07-54-32-835| RSH: listener is active.
07-54-32-835| Send broadcast WTCU discover.
07-54-32-835| [ httpd] [ 10.254556] Reread settings.
07-54-32-835| [ initrd] [ 10.254663] Unpack /bootmedia/packages/print.
07-54-32-835| [ httpd] [ 10.254792] Everyone can control terminal by HTTP.
07-54-32-835| [ initrd] [ 10.338393] Unpack /bootmedia/packages/pi2-print.
07-54-32-835| [ initrd] [ 10.346358] Run '/sbin/printer 0 1 0 0 0 0000:0000', log '', env '', pid ''.
07-54-32-835| [ pfac] [ 10.346406] Run /sbin/printer 0 1 0 0 0 0000:0000.
07-54-32-835| [ pfac] [ 10.346530] Ok, PID 865.
07-54-32-835| [ initrd] [ 10.346579] Load usb printer driver.
07-54-32-835| [ initrd] [ 10.346625] modprobe usblp.
07-54-32-835| [ printer 0] [ 10.347719] Printserver, WTware 6.0.30/RPi.
07-54-32-835| [ printer 0] [ 10.347770] Printserver 0, device /dev/usb/lp0, listen at port 9100.
07-54-32-835| [ printer 0] [ 10.347813] Printer device not found. Waiting...
07-54-32-835| [ initrd] [ 10.355970] Unpack /bootmedia/packages/pi2-f.
07-54-32-835| [ KERNEL] [ 10.356894] usblp 1-1.2:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0085
07-54-32-835| [ KERNEL] [ 10.356955] usbcore: registered new interface driver usblp
07-54-32-835| [ KERNEL] [ 10.509746] random: crng init done
07-54-32-835| [ gm] [ 10.514071] WTware 6.0.30/RPi session manager.
07-54-32-835| [ gm] [ 10.514654] EV_REL flag found. Add event1: Logitech K540/K545.
07-54-32-835| [ gm] [ 10.514738] EV_REL flag found. Add event0: Logitech MX Master 2S.
07-54-32-835| [ gm] [ 10.514892] Display mode: 1920x1080, 16 bit, landscape, 0 Hz, modeline "", DDC enabled, connector 0.
07-54-32-835| [ gm] [ 10.800675] Framebuffer device found.
07-54-32-835| [ gm] [ 10.800747] LINELENBYTES 3840
07-54-32-835| [ gm] [ 10.800800] VLEN 4147200
07-54-32-835| [ gm] [ 10.802129] Use /lib/ui16.so.
07-54-32-835| [ gm] [ 10.816846] Unpack /bootmedia/packages/pi2-lstdcpp.
07-54-32-835| [ gm] [ 10.883702] Unpack /bootmedia/packages/pi2-xml2.
07-54-32-835| [ gm] [ 13.283052] Unpack /bootmedia/packages/pi2-dbus.
07-54-32-835| [ gm] [ 13.413774] +--- Executing "/usr/bin/dbus-uuidgen --ensure"
07-54-32-835| [ gm] [ 13.417782] +- Errorlevel: 0, output:
07-54-32-835| | <No output>
07-54-32-835| [ gm] [ 13.417937] +------------------------
07-54-32-835| [ gm] [ 13.417991] +--- Executing "/usr/bin/dbus-daemon --system "
07-54-32-835| [ gm] [ 13.431275] +- Errorlevel: 0, output:
07-54-32-835| | <No output>
07-54-32-835| [ gm] [ 13.431462] +------------------------
07-54-32-835| [ gm] [ 13.431521] Run '/usr/bin/dbus-daemon --session --address=unix:path=/run/user/1007/bus', log '', env '', pid ''.
07-54-32-835| [ pfac] [ 13.431786] Run /usr/bin/dbus-daemon --session --address=unix:path=/run/user/1007/bus.
07-54-32-835| [ pfac] [ 13.431843] Ok, PID 876.
07-54-32-835| [ gm] [ 13.432008] Unpack /bootmedia/packages/pi2-scan.
07-54-32-835| [ gm] [ 13.734627] Start saned: '/usr/local/sbin/saned -lD', environment is empty.
07-54-32-835| [ SYSLOG] [ 13.743179] <31>Jan 16 00:00:12 saned[877]: saned (IPv4 only) from sane-backends 1.0.31-237-gd46fbd9d7 starting up
07-54-32-835| [ SYSLOG] [ 13.744217] <31>Jan 16 00:00:12 saned[878]: Now daemonized
07-54-32-835| [ gm] [ 13.751949] Run '/sbin/resolver 0x1f91e60 dns [192.168.6.24]', log '', env '', pid ''.
07-54-32-835| [ pfac] [ 13.752228] Run /sbin/resolver 0x1f91e60 dns [192.168.6.24].
07-54-32-835| [ pfac] [ 13.752282] Ok, PID 879.
07-54-32-835| [ gm] [ 13.752371] Nobody can control terminal by VNC.
07-54-32-835| [ gm] [ 13.752431] Nobody can control terminal by WTRC.
07-54-32-835| [ pfac] [ 13.754942] Process pid 879 terminated, status 00000000.
07-54-32-835| [ gm] [ 13.755071] 192.168.6.24 => 192.168.6.24.
07-54-32-835| [ gm] [ 13.758600] Free ram before fork terminal client /sbin/rdpclient (session 1): 3843944 Kb.
07-54-32-835| [ gm] [ 13.758663] Run '/sbin/rdpclient 1', log '/tmp/rdpclient.out', env '', pid ''.
07-54-32-835| [ pfac] [ 13.758889] Run /sbin/rdpclient 1.
07-54-32-835| [ pfac] [ 13.758941] Ok, PID 880.
07-54-32-835| [ rdpclient 880] [ 13.764318] RDP Terminal Client, WTware 6.0.30/RPi, pipe 1, pid 880.
07-54-32-835| [ rdpclient 880] [ 13.764562] Use /lib/ui16.so.
07-54-32-835| [ rdpclient 880] [ 13.765448] Make RDP session with 192.168.6.24, port 3389.
07-54-32-835| [ rdpclient 880] [ 13.765527] No username.
07-54-32-835| [ rdpclient 880] [ 13.765586] No password.
07-54-32-835| [ rdpclient 880] [ 13.765626] No PIN.
07-54-32-835| [ rdpclient 880] [ 13.765664] No domain.
07-54-32-835| [ rdpclient 880] [ 13.765701] No shell.
07-54-32-835| [ rdpclient 880] [ 13.765739] No directory.
07-54-32-835| [ rdpclient 880] [ 13.765775] Window: 1856x1080@16.
07-54-32-835| [ rdpclient 880] [ 13.765818] PFlags 0x0000002F.
07-54-32-835| [ rdpclient 880] [ 13.765856] Keyboard 00000407:00000000.
07-54-32-835| [ rdpclient 880] [ 13.765893] My hostname "wtwDCA6327ED4E6".
07-54-32-835| [ rdpclient 880] [ 13.765931] TCP: connecting to 192.168.6.24:3389.
07-54-32-835| [ rdpclient 880] [ 13.766179] TCP: connection with 192.168.6.24:3389 established.
07-54-32-835| [ rdpclient 880] [ 13.766234] Turn keepalive on.
07-54-32-835| [ rdpclient 880] [ 13.767210] Free ram after buffers allocation: 3843188 KB.
07-54-32-835| [ rdpclient 880] [ 13.773988] Process RDP server certificate.
07-54-32-835| [ rdpclient 880] [ 13.774049] RDP5 encryption (X.509).
07-54-32-835| [ rdpclient 880] [ 13.776286] License: STATUS_VALID_CLIENT.
07-54-32-835| [ KERNEL] [ 21.558874] logitech-hidpp-device 0003:046D:4076.0005: HID++ 4.1 device connected.
07-54-32-835| [ rdpclient 880] [ 26.081686] LOGON_EX_LOGONERRORS: ErrorNotificationType 0xfffffffe, ErrorNotificationData 0x00000008.
07-54-32-835| [ rdpclient 880] [ 29.745144] SessionId 0x00000008: OHRA\serviceadmin.
07-54-32-835| [ KERNEL] [ 37.939171] logitech-hidpp-device 0003:046D:4069.0004: HID++ 4.5 device connected.
07-54-32-835| [ KERNEL] [ 61.921239] usb 1-1.4: USB disconnect, device number 4
07-54-32-835| [ gm] [ 62.030248] evdev.cpp ( 1325): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
07-54-32-835| [ gm] [ 62.030308] Close input device 'Logitech MX Master 2S', errno 19.
07-54-32-835| [ gm] [ 62.190470] evdev.cpp ( 1325): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
07-54-32-835| [ gm] [ 62.190619] Close input device 'Logitech K540/K545', errno 19.
07-54-32-836| Connection from wtc.exe at 192.168.6.123.