Solution for Ethernet with static ip:
1. Configure wtware to work with WiFi.
2. On another machine create file 'runme'
without extension with this text:
Code: Select all
#!/bin/sh
modprobe genet
modprobe lan78xx
modprobe smsc95xx
ifconfig eth1 192.168.2.200 netmask 255.255.255.0 up
It runs drivers for all Raspberry Ethernet and starts network interface. Change 192.168.2.200 and netmask with yours.
3. Put 'runme' into my.zip archive.
4. If Raspberry downloads configs from SD, upload my.zip to /configs folder on SD with terminal web interface or write directly to SD.
If Raspberry downloads configs by network, put my.zip into Everyone folder on TFTP/HTTP.
5. Add to wtware config file:
Also, it may be usefull to add 'telnetd' word to cmdline.txt (add to end of line, cmdline.txt is single line file) file on SD to start internal telnet server in wtware to ping or make other tests from terminal when graphic interface is already started.
Routing is disabled by default, so traffic from Ethernet will never pass to WiFi.