Wireless WPA2 Enterprise Authentication

Post a reply


In an effort to prevent automatic submissions, we require that you complete the following challenge.
Smilies
:D :) :( :o :shock: :? 8) :lol: :x :P :oops: :cry: :evil: :twisted: :roll: :wink: :!: :?: :idea: :arrow: :| :mrgreen:

BBCode is OFF
Smilies are ON

Topic review
   

Expand view Topic review: Wireless WPA2 Enterprise Authentication

Re: Wireless WPA2 Enterprise Authentication

by aka » Thu Nov 17, 2016 2:29 pm

Great! For we had no more ideas.

Re: Wireless WPA2 Enterprise Authentication

by vincny » Wed Nov 16, 2016 2:52 pm

Hi Aka,

It my fault, I have remove the following parameter from the wpa_supplication.conf "phase1="peaplabel=1"" and immediately it started working.

And I am very happy to tell you job well done! :)

Thanks,
Ken

Re: Wireless WPA2 Enterprise Authentication

by aka » Wed Nov 16, 2016 1:25 pm

Everything is right, as far as I know.
Does Raspbian work with your WiFi?

Send me dmesg, ifconfig, iwconfig output:
dmesg > /tmp/123.log
ifconfig > /tmp/234.log
iwconfig > /tmp/345.log
and wpa_supplicant.conf, if it exists
To support@wtware.com

Re: Wireless WPA2 Enterprise Authentication

by vincny » Wed Nov 16, 2016 6:40 am

Hi Aka,

Continue with all_log3.jpg, all_log4.jpg - Hope it is useful for you to help to make it work.

Thanks,
Ken
Attachments
all_log3.jpg
all_log3.jpg (199.82 KiB) Viewed 1842 times
all_log4.jpg
all_log4.jpg (195.14 KiB) Viewed 1842 times

Re: Wireless WPA2 Enterprise Authentication

by vincny » Wed Nov 16, 2016 6:29 am

Hi Aka,

I am sorry for the delay, please refer to the new photo taken.

1. Ping.jpg - I have tried to ping IP address on the same subnet but same result.
2. All_log1.jpg, All_log2.jpg - Hope you can help to find something here.

Thanks,
Ken
Attachments
all_log1.jpg
all_log1.jpg (186.84 KiB) Viewed 1842 times
all_log2.jpg
all_log2.jpg (161.9 KiB) Viewed 1842 times

Re: Wireless WPA2 Enterprise Authentication

by aka » Mon Nov 14, 2016 5:17 pm

ifconfig and iwconfig look right. And there is some traffic received/transmitted.
Why are there 1500 seconds since boot? Did you take the photos immediately after boot, without entering setup?

4. all_log1.jpg - CTRL-EVENT-DISCONNECTED, and it knows AP mac. Seems it is not the first connection after reboot. Please, make me photos after boot.

2. iwconfig.jpg - No IP address is being observed - iwconfig should not display IP. It's WiFi configuration.

3.ping.jpg - Ping did not went through the gateway. - Please, ping something LOCAL. In WiFi subnet.

And please disconnect USB mouse Logitech. It disconnects every minute and sends a lot of text to log.

Re: Wireless WPA2 Enterprise Authentication

by vincny » Mon Nov 14, 2016 12:51 pm

Hi Aka,

Please refer to attach photos.

4. all_log1.jpg - Authentication successful has been observer
5. all_log2.jpg - No relevant Wireless log
6. all_log3.jpg - No relevant wireless log

Thanks,
Ken
Attachments
all_long1.jpg
all_long1.jpg (222.78 KiB) Viewed 1861 times
all_long3.jpg
all_long3.jpg (159.59 KiB) Viewed 1861 times
all_long2.jpg
all_long2.jpg (147.42 KiB) Viewed 1861 times

Re: Wireless WPA2 Enterprise Authentication

by vincny » Mon Nov 14, 2016 12:30 pm

Hi Aka,

Please refer to attach photos.

1. ifconfig.jpg - The Static IP Address was define here
2. iwconfig.jpg - No IP address is being observer
3.ping.jpg - Ping did not went through the gateway

Will continue with log on next post as maximum only 3 phot allow.

Thanks,
Ken
Attachments
ping.jpg
ping.jpg (180.19 KiB) Viewed 1861 times
iwconfig.jpg
iwconfig.jpg (198.81 KiB) Viewed 1861 times
ifconfig.jpg
ifconfig.jpg (254.52 KiB) Viewed 1861 times

Re: Wireless WPA2 Enterprise Authentication

by vincny » Mon Nov 14, 2016 7:09 am

Hi Aka,

Yes the Radius server work with static IP.
Yes wireless is important for my deployment. :(
I hope it will work, I will install the test version and let you know.

Thanks,
Ken

Re: Wireless WPA2 Enterprise Authentication

by aka » Mon Nov 14, 2016 6:26 am

Let us now dig deeper.
Download, install, write on SD: http://pxe.ru/files/testing/201611132210.zip
Write wpa_supplicant.conf in /confgs/ on SD.
Boot.
Configure static IP (by the way, does your radius server work with static ip? why does connection drop after it failed to get IP address?)
Configure local config. Write "server=1.2.3.4" in config.
Reboot. Do not enter setup anymore, let it boot.
It will open command prompt. Type:
ifconfig
Make screen photo.
Type:
iwconfig
Photo again. Type:
ping -c 1 12.34.56.78
replace 12.34.56.78 with real pingable ip in wifi subnet. Photo.
Type:
cat /tmp/all.log
Photo.
Press Shift-PageUp.
Photo.
Repeat "Press Shift-PageUp. Photo." three times.
Do you still need wtware and wpa2 enterprise?

Re: Wireless WPA2 Enterprise Authentication

by vincny » Fri Nov 11, 2016 3:12 am

Hi Aka,

I have a radius server for wireless authentication.
I check the log it is authenticating the wireless session from rpi 3, further more the status is successful.

Additional info:

I can also see that rpi 3 is connected to the Wireless LAN control just that it cannot get an IP address
and the connect will drop off after a few minute fail to get IP address.

Maybe the new version static IP only apply to LAN network and not Wireless?
Just my guess.

Thanks,
Ken

Re: Wireless WPA2 Enterprise Authentication

by aka » Fri Nov 11, 2016 1:47 am

If static IP does not work, why you think WiFi works?

Re: Wireless WPA2 Enterprise Authentication

by vincny » Thu Nov 10, 2016 4:40 pm

Hi Aka,

Nope not working with static ip.
I tried to set the static IP during initial SD card install but not working.

Thanks,
Ken

Re: Wireless WPA2 Enterprise Authentication

by aka » Thu Nov 10, 2016 4:22 pm

Does it works with static IP? You connected to terminal server and got windows desktop?

Re: Wireless WPA2 Enterprise Authentication

by vincny » Thu Nov 10, 2016 5:05 am

Hi Aka,

Good job! We are almost there, I am now able to authenticate using the config file but I have problem getting DHCP IP address.
The DHCP work fine on other devices, could it be that the following wlan0 DHCP configuration?

nano /etc/network/interfaces

auto wlan0
allow-hotplug wlan0
iface wlan0 inet dhcp
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf

Update:

In additional, I cannot get wireless IP address even non encrypted/no password WIFI SSID which worked on version 5.4.52.

Thanks a million,
Ken

Top