by Jasperdg » Fri Jan 28, 2022 1:26 pm
We are using an Intel NUC as thin-client. The model is NUC7CJYHN. It has a Celeron J4005 processor running at 2MHz and 2 HDMI outputs. We added 8GB memory. But PXE booting does not work/ does not complete. Network is no problem: We can find the MAC address in our DHCP leases, and booting from a WTware USB stick works fine. Also: The other 25 thin clients have no problems booting PXE. So we can conclude the server, the DHCP and network are configured correctly.
We have updated the BIOS to the latest release (JYGLKCPX.86A.0067.2021.1111.1431), and set the boot order to UEFI: LAN: PXE IP4 followed by UEFI: LAN: PXE IP6.
Upon boot the media is present and PXE boot by IP4 succeeds. Then the system gets stuck in "Downloading NBP file..."
The screen keeps flashing, and you can see "NBP file downloaded successfully".
Please help.
We are using an Intel NUC as thin-client. The model is NUC7CJYHN. It has a Celeron J4005 processor running at 2MHz and 2 HDMI outputs. We added 8GB memory. But PXE booting does not work/ does not complete. Network is no problem: We can find the MAC address in our DHCP leases, and booting from a WTware USB stick works fine. Also: The other 25 thin clients have no problems booting PXE. So we can conclude the server, the DHCP and network are configured correctly.
We have updated the BIOS to the latest release (JYGLKCPX.86A.0067.2021.1111.1431), and set the boot order to UEFI: LAN: PXE IP4 followed by UEFI: LAN: PXE IP6.
Upon boot the media is present and PXE boot by IP4 succeeds. Then the system gets stuck in "Downloading NBP file..."
The screen keeps flashing, and you can see "NBP file downloaded successfully".
Please help.