WTware v.6.2.20/RPi wtwB827EB2C2FF2 WTware 6.2.20/RPi supervisor. [ KERNEL] [ 0.000000] Booting Linux on physical CPU 0x0 [ KERNEL] [ 0.000000] Linux version 6.1.77-v7 (aka@c26) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #7 SMP Tue Mar 19 00:34:38 +04 2024 [ KERNEL] [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ KERNEL] [ 0.000000] CPU: div instructions available: patching division code [ KERNEL] [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ KERNEL] [ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2 [ KERNEL] [ 0.000000] random: crng init done [ KERNEL] [ 0.000000] Memory policy: Data cache writealloc [ KERNEL] [ 0.000000] Reserved memory: created CMA memory pool at 0x36000000, size 64 MiB [ KERNEL] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ KERNEL] [ 0.000000] Zone ranges: [ KERNEL] [ 0.000000] DMA [mem 0x0000000000000000-0x0000000039ffffff] [ KERNEL] [ 0.000000] Normal empty [ KERNEL] [ 0.000000] Movable zone start for each node [ KERNEL] [ 0.000000] Early memory node ranges [ KERNEL] [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000039ffffff] [ KERNEL] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000039ffffff] [ KERNEL] [ 0.000000] percpu: Embedded 11 pages/cpu s14036 r8192 d22828 u45056 [ KERNEL] [ 0.000000] pcpu-alloc: s14036 r8192 d22828 u45056 alloc=11*4096 [ KERNEL] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ KERNEL] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 235712 [ KERNEL] [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbdepth=32 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 quiet wtboot=mmc [ KERNEL] [ 0.000000] Unknown kernel command line parameters "wtboot=mmc", will be passed to user space. [ KERNEL] [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ KERNEL] [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ KERNEL] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ KERNEL] [ 0.000000] Memory: 865916K/950272K available (6144K kernel code, 580K rwdata, 824K rodata, 2048K init, 354K bss, 18820K reserved, 65536K cma-reserved) [ KERNEL] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ KERNEL] [ 0.000000] rcu: Hierarchical RCU implementation. [ KERNEL] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ KERNEL] [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ KERNEL] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ KERNEL] [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [ KERNEL] [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ KERNEL] [ 0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ KERNEL] [ 0.000018] Switching to timer-based delay loop, resolution 52ns [ KERNEL] [ 0.000289] Console: colour dummy device 80x30 [ KERNEL] [ 0.000354] printk: console [tty0] enabled [ KERNEL] [ 0.000401] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ KERNEL] [ 0.000422] CPU: Testing write buffer coherency: ok [ KERNEL] [ 0.000478] pid_max: default: 32768 minimum: 301 [ KERNEL] [ 0.000679] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ KERNEL] [ 0.000702] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ KERNEL] [ 0.001590] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ KERNEL] [ 0.002250] Setting up static identity map for 0x100000 - 0x10003c [ KERNEL] [ 0.002354] rcu: Hierarchical SRCU implementation. [ KERNEL] [ 0.002363] rcu: Max phase no-delay instances is 1000. [ KERNEL] [ 0.002754] smp: Bringing up secondary CPUs ... [ KERNEL] [ 0.003439] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ KERNEL] [ 0.004194] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ KERNEL] [ 0.004842] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ KERNEL] [ 0.004925] smp: Brought up 1 node, 4 CPUs [ KERNEL] [ 0.004944] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ KERNEL] [ 0.004956] CPU: All CPU(s) started in HYP mode. [ KERNEL] [ 0.004963] CPU: Virtualization extensions available. [ KERNEL] [ 0.005607] devtmpfs: initialized [ KERNEL] [ 0.019214] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 [ KERNEL] [ 0.019393] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ KERNEL] [ 0.019420] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ KERNEL] [ 0.022043] pinctrl core: initialized pinctrl subsystem [ KERNEL] [ 0.022889] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ KERNEL] [ 0.025198] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ KERNEL] [ 0.030671] thermal_sys: Registered thermal governor 'step_wise' [ KERNEL] [ 0.031016] Serial: AMBA PL011 UART driver [ KERNEL] [ 0.035224] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ KERNEL] [ 0.050001] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-10-17T15:42:39, variant start [ KERNEL] [ 0.060019] raspberrypi-firmware soc:firmware: Firmware hash is 30f0c5e4d076da3ab4f341d88e7d505760b93ad7 [ KERNEL] [ 0.098628] cryptd: max_cpu_qlen set to 1000 [ KERNEL] [ 0.099396] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1 [ KERNEL] [ 0.101012] usbcore: registered new interface driver usbfs [ KERNEL] [ 0.101076] usbcore: registered new interface driver hub [ KERNEL] [ 0.101128] usbcore: registered new device driver usb [ KERNEL] [ 0.101297] usb_phy_generic phy: supply vcc not found, using dummy regulator [ KERNEL] [ 0.102555] clocksource: Switched to clocksource arch_sys_counter [ KERNEL] [ 0.111703] NET: Registered PF_INET protocol family [ KERNEL] [ 0.111966] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ KERNEL] [ 0.114413] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ KERNEL] [ 0.114446] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ KERNEL] [ 0.114466] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ KERNEL] [ 0.114581] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) [ KERNEL] [ 0.114910] TCP: Hash tables configured (established 8192 bind 8192) [ KERNEL] [ 0.115043] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ KERNEL] [ 0.115094] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ KERNEL] [ 0.115268] NET: Registered PF_UNIX/PF_LOCAL protocol family [ KERNEL] [ 0.126261] Initialise system trusted keyrings [ KERNEL] [ 0.126525] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ KERNEL] [ 0.266405] Key type asymmetric registered [ KERNEL] [ 0.266432] Asymmetric key parser 'x509' registered [ KERNEL] [ 0.271808] bcm2708_fb soc:fb: FB found 1 display(s) [ KERNEL] [ 0.307934] Console: switching to colour frame buffer device 240x67 [ KERNEL] [ 0.335415] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1920x1080 [ KERNEL] [ 0.339687] bcm2835-rng 3f104000.rng: hwrng registered [ KERNEL] [ 0.340024] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ KERNEL] [ 0.341994] zram: Added device: zram0 [ KERNEL] [ 0.343530] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ KERNEL] [ 1.107380] Core Release: 2.80a [ KERNEL] [ 1.107429] Setting default values for core params [ KERNEL] [ 1.107471] Finished setting default values for core params [ KERNEL] [ 1.307821] Using Buffer DMA mode [ KERNEL] [ 1.307843] Periodic Transfer Interrupt Enhancement - disabled [ KERNEL] [ 1.307852] Multiprocessor Interrupt Enhancement - disabled [ KERNEL] [ 1.307860] OTG VER PARAM: 0, OTG VER FLAG: 0 [ KERNEL] [ 1.308686] Dedicated Tx FIFOs mode [ KERNEL] [ 1.309515] [ KERNEL] [ 1.309522] WARN::dwc_otg_hcd_init:1072: FIQ DMA bounce buffers: virt = b6104000 dma = 0xf6104000 len=9024 [ KERNEL] [ 1.309569] FIQ FSM acceleration enabled for : [ KERNEL] [ 1.309569] Non-periodic Split Transactions [ KERNEL] [ 1.309569] Periodic Split Transactions [ KERNEL] [ 1.309569] High-Speed Isochronous Endpoints [ KERNEL] [ 1.309569] Interrupt/Control Split Transaction hack enabled [ KERNEL] [ 1.309584] dwc_otg: Microframe scheduler enabled [ KERNEL] [ 1.309684] [ KERNEL] [ 1.309691] WARN::hcd_init_fiq:457: FIQ on core 1 [ KERNEL] [ 1.309706] [ KERNEL] [ 1.309710] WARN::hcd_init_fiq:458: FIQ ASM at 804a9ea8 length 36 [ KERNEL] [ 1.309727] [ KERNEL] [ 1.309731] WARN::hcd_init_fiq:496: MPHI regs_base at ba810000 [ KERNEL] [ 1.309762] dwc_otg 3f980000.usb: DWC OTG Controller [ KERNEL] [ 1.309818] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ KERNEL] [ 1.309860] dwc_otg 3f980000.usb: irq 89, io mem 0x00000000 [ KERNEL] [ 1.309917] Init: Port Power? op_state=1 [ KERNEL] [ 1.309925] Init: Power Port (0) [ KERNEL] [ 1.310107] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ KERNEL] [ 1.310126] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ KERNEL] [ 1.310141] usb usb1: Product: DWC OTG Controller [ KERNEL] [ 1.310154] usb usb1: Manufacturer: Linux 6.1.77-v7 dwc_otg_hcd [ KERNEL] [ 1.310165] usb usb1: SerialNumber: 3f980000.usb [ KERNEL] [ 1.310848] hub 1-0:1.0: USB hub found [ KERNEL] [ 1.310889] hub 1-0:1.0: 1 port detected [ KERNEL] [ 1.311659] dwc_otg: FIQ enabled [ KERNEL] [ 1.311688] dwc_otg: NAK holdoff enabled [ KERNEL] [ 1.311699] dwc_otg: FIQ split-transaction FSM enabled [ KERNEL] [ 1.311723] Module dwc_common_port init [ KERNEL] [ 1.316800] usbcore: registered new interface driver usbtouchscreen [ KERNEL] [ 1.319749] sdhci: Secure Digital Host Controller Interface driver [ KERNEL] [ 1.319778] sdhci: Copyright(c) Pierre Ossman [ KERNEL] [ 1.320145] sdhci-pltfm: SDHCI platform and OF driver helper [ KERNEL] [ 1.320280] hid: raw HID events driver (C) Jiri Kosina [ KERNEL] [ 1.321498] usbcore: registered new interface driver usbhid [ KERNEL] [ 1.321526] usbhid: USB HID core driver [ KERNEL] [ 1.335494] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ KERNEL] [ 1.335528] [vc_sm_connected_init]: start [ KERNEL] [ 1.343177] [vc_sm_connected_init]: installed successfully [ KERNEL] [ 1.343562] NET: Registered PF_PACKET protocol family [ KERNEL] [ 1.343614] Key type dns_resolver registered [ KERNEL] [ 1.343715] Registering SWP/SWPB emulation handler [ KERNEL] [ 1.345848] Loading compiled-in X.509 certificates [ KERNEL] [ 1.350126] uart-pl011 3f201000.serial: cts_event_workaround enabled [ KERNEL] [ 1.350238] 3f201000.serial: ttyAMA1 at MMIO 0x3f201000 (irq = 114, base_baud = 0) is a PL011 rev2 [ KERNEL] [ 1.350402] serial serial0: tty port ttyAMA1 registered [ KERNEL] [ 1.351882] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ KERNEL] [ 1.352216] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ KERNEL] [ 1.353689] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ KERNEL] [ 1.353723] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated [ KERNEL] [ 1.379792] sdhost: log_buf @ cc47425a (f6107000) [ KERNEL] [ 1.428622] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ KERNEL] [ 1.429034] of_cfs_init [ KERNEL] [ 1.429164] of_cfs_init: OK [ KERNEL] [ 1.438253] Indeed it is in host mode hprt0 = 00021501 [ KERNEL] [ 1.442516] Freeing unused kernel image (initmem) memory: 2048K [ KERNEL] [ 1.473178] mmc0: host does not support reading read-only switch, assuming write-enable [ KERNEL] [ 1.476011] mmc0: new high speed SDHC card at address 1234 [ KERNEL] [ 1.476516] mmcblk0: mmc0:1234 SA32G 28.9 GiB [ KERNEL] [ 1.477793] mmcblk0: p1 [ KERNEL] [ 1.478190] mmcblk0: mmc0:1234 SA32G 28.9 GiB [ KERNEL] [ 1.519874] mmc1: new high speed SDIO card at address 0001 [ KERNEL] [ 1.547084] Run /init as init process [ KERNEL] [ 1.547110] with arguments: [ KERNEL] [ 1.547116] /init [ KERNEL] [ 1.547123] with environment: [ KERNEL] [ 1.547128] HOME=/ [ KERNEL] [ 1.547133] TERM=linux [ KERNEL] [ 1.547140] wtboot=mmc [ KERNEL] [ 1.652614] usb 1-1: new high-speed USB device number 2 using dwc_otg [ KERNEL] [ 1.652791] Indeed it is in host mode hprt0 = 00001101 [ hotplug] [ 1.712831] Block device 254:0. No action. [ hotplug] [ 1.778533] Block device 179:1. No action. [ hotplug] [ 1.778698] Block device 179:0. No action. [ pfac] [ 1.879512] Run /sbin/initrd. [ pfac] [ 1.879664] Ok, PID 283. [ initrd] [ 1.883996] WTware 6.2.20/RPi shell. [ initrd] [ 1.884526] Load font 'ter-c32b.psf', console 120x33. [ initrd] [ 1.913044] HDD/MMC/SD boot. [ initrd] [ 1.913137] No device '/dev/fb1'. [ KERNEL] [ 1.922857] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [ KERNEL] [ 1.922879] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ KERNEL] [ 1.923334] hub 1-1:1.0: USB hub found [ KERNEL] [ 1.923425] hub 1-1:1.0: 5 ports detected [ initrd] [ 1.974260] Success: /dev/mmcblk0p1 mounted to /bootmedia. /--- FILE "/bootmedia/config.txt" ----------------------- | # For more options and information see: | # | # https://www.raspberrypi.org/documentation/computers/config_txt.html#what-is-config-txt | # | disable_overscan=1 | # Uncomment if hdmi display is not detected and composite is being output. | #hdmi_force_hotplug=1 | # Force the monitor to HDMI mode so that sound will be sent over HDMI cable. | #hdmi_drive=2 | # Uncomment to increase signal to HDMI, if you have interference, blanking, or | # no display. | #config_hdmi_boost=4 | # Uncomment to overclock the arm. 700 MHz is the default. | #arm_freq=800 | gpu_mem=96 | disable_splash=1 | framebuffer_depth=32 | # Uncomment for 16-bit color. | #framebuffer_depth=16 | # Enable onboard audio (HDMI or jack). | dtparam=audio=on | # Removes the warning overlay. | #avoid_warnings=1 | # Additionally allows turbo when low-voltage is present. | #avoid_warnings=2 | [pi4] | # Enable second display by default | max_framebuffers=2 | # Run as fast as firmware / board allows | arm_boost=1 | [all] | # Uncomment these two lines to set display resolution: | #hdmi_group=2 | #hdmi_mode=58 | # | # Specify correct value in hdmi_mode= line from the list of valid values: | # 800x600: hdmi_mode=9 | # 1024x768: hdmi_mode=16 | # 1280x1024: hdmi_mode=35 | # 1360x768: hdmi_mode=39 | # 1400x1050: hdmi_mode=42 | # 1440x900: hdmi_mode=47 | # 1600x1200: hdmi_mode=51 | # 1680x1050: hdmi_mode=58 | # 1366x768: hdmi_mode=81 | # 1920x1080: hdmi_mode=82 | # 1920x1200: hdmi_mode=69 | # | # Find more resolutions in manual: | # https://www.raspberrypi.org/documentation/computers/config_txt.html#video-options | # | # Uncomment six lines with such syntax and right hdmi_mode= values for | # dual displays on Raspberry Pi 4: | # | #[HDMI:0] | # hdmi_group=2 | # hdmi_mode=42 | #[HDMI:1] | # hdmi_group=2 | # hdmi_mode=58 \---------------------------------------------------- [ KERNEL] [ 2.252596] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ KERNEL] [ 2.392829] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [ KERNEL] [ 2.392850] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ KERNEL] [ 2.492583] usb 1-1.4: new low-speed USB device number 4 using dwc_otg [ KERNEL] [ 2.627593] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00 [ KERNEL] [ 2.627618] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ KERNEL] [ 2.627633] usb 1-1.4: Product: USB Optical Mouse [ KERNEL] [ 2.627645] usb 1-1.4: Manufacturer: Logitech [ KERNEL] [ 2.632948] input: Logitech USB Optical Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C077.0001/input/input0 [ KERNEL] [ 2.633485] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-3f980000.usb-1.4/input0 [ KERNEL] [ 2.732583] usb 1-1.5: new low-speed USB device number 5 using dwc_otg [ KERNEL] [ 2.880597] usb 1-1.5: New USB device found, idVendor=0461, idProduct=0010, bcdDevice= 1.04 [ KERNEL] [ 2.880620] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ KERNEL] [ 2.880635] usb 1-1.5: Product: USB Keyboard [ KERNEL] [ 2.880647] usb 1-1.5: Manufacturer: NOVATEK [ KERNEL] [ 2.893445] input: NOVATEK USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:0461:0010.0002/input/input1 [ KERNEL] [ 2.963561] hid-generic 0003:0461:0010.0002: input,hidraw1: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-3f980000.usb-1.5/input0 [ KERNEL] [ 2.981436] input: NOVATEK USB Keyboard System Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.1/0003:0461:0010.0003/input/input2 [ KERNEL] [ 3.043331] input: NOVATEK USB Keyboard Consumer Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.1/0003:0461:0010.0003/input/input3 [ KERNEL] [ 3.043751] hid-generic 0003:0461:0010.0003: input,hidraw2: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-3f980000.usb-1.5/input1 [ KERNEL] [ 3.362644] hwmon hwmon0: Undervoltage detected! /--- FILE "/bootmedia/configs/initrd.wtc" ----------------------- | [BOM] | clientIP=192.168.80.193 | netmask=255.255.0.0 | routerIP=192.168.10.240 | nameserverIP=192.168.101.102 | config=local | setupPassword=01d986045190ccbc7864d3aa01ef10bf \---------------------------------------------------- [ initrd] [ 3.584014] Do not cache package files. [ initrd] [ 3.584131] WTpassword present: 01d986045190ccbc7864d3aa01ef10bf. [ initrd] [ 3.593667] Unpack /bootmedia/packages/pi2-lib. [ initrd] [ 4.456092] USB: 0461:0010 Primax Electronics, Ltd HP PR1101U / Primax PMX-KPR1101U Keyboard. [ initrd] [ 4.456239] USB: 0424:ec00 Microchip Technology, Inc. (formerly SMSC) SMSC9512/9514 Fast Ethernet Adapter. [ initrd] [ 4.456307] USB: 0424:9514 Microchip Technology, Inc. (formerly SMSC) SMC9514 Hub. [ initrd] [ 4.456372] USB: 046d:c077 Logitech, Inc. Mouse. [ initrd] [ 5.611788] Load Ethernet drivers. [ initrd] [ 5.612031] modprobe lan78xx. [ initrd] [ 5.618102] modprobe smsc95xx. [ KERNEL] [ 5.620104] usbcore: registered new interface driver lan78xx [ KERNEL] [ 5.627338] smsc95xx v2.0.0 [ KERNEL] [ 5.670942] Generic PHY usb-001:003:01: attached PHY driver (mii_bus:phy_addr=usb-001:003:01, irq=POLL) [ KERNEL] [ 5.672038] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:2c:2f:f2 [ KERNEL] [ 5.672358] usbcore: registered new interface driver smsc95xx [ initrd] [ 5.701989] WTpassword present: 01d986045190ccbc7864d3aa01ef10bf. [ KERNEL] [ 5.704074] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ initrd] [ 5.702401] [ARP] Ping 192.168.10.240. [ KERNEL] [ 5.706419] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off [ initrd] [ 5.902418] [ARP] Got opcode 0x0001 from 0.0.0.0 instead of ARP reply 0x0002. WTC listener is active. WTC broadcast listener is active. Send broadcast WTCU discover. [ pfac] [ 5.952319] Run /sbin/httpd. [ initrd] [ 5.952415] Run '/sbin/httpd', log '/tmp/httpd.out', env '', pid ''. [ pfac] [ 5.952548] Ok, PID 344. [ initrd] [ 5.952599] Copy /bootmedia/configs/config.wtc to /tmp/config.wtc. [ initrd] [ 5.952716] /bootmedia/configs/config.wtc -> /tmp/config.wtc, 386 bytes copied. [ initrd] [ 5.952824] Common local disk config: /--- FILE "/tmp/config.wtc" ----------------------- | [BOM] | server = 192.168.101.139 | language = pt | keyboard = pt | disk = usb | shared_disk = usb | sound = on | smartcard = gempctwin | infobox = rctrl | onerror = quiet Skip 'CLID'. \---------------------------------------------------- /--- FILE "/etc/config.compiled" ----------------------- | [BOM] | server=192.168.101.139 | language=pt | keyboard=pt | disk=usb | shared_disk=usb | sound=on | smartcard=gempctwin | infobox=rctrl | onerror=quiet Skip 'CLID'. | connection \---------------------------------------------------- [ initrd] [ 5.955444] Hostname: "wtwB827EB2C2FF2". [ initrd] [ 5.955641] [NTP] 42 DHCP option is not set. Everyone can control terminal by RSH. RSH: listener is active. Send broadcast WTCU discover. Start LLDP. [ httpd] [ 5.964622] Internal HTTP Server, WTware 6.2.20/RPi [ httpd] [ 5.972481] Reread settings. [ initrd] [ 5.972613] Unpack /bootmedia/packages/pi2-f. [ httpd] [ 5.972664] Everyone can control terminal by HTTP. [ gm] [ 6.319875] WTware 6.2.20/RPi session manager. [ gm] [ 6.320856] [ERROR] Incorrect "language" parameter value. [ gm] [ 6.321115] [EVDEV] Keys found. Add event3: NOVATEK USB Keyboard Consumer Control. [ gm] [ 6.321166] [EVDEV] Keys found. Add event2: NOVATEK USB Keyboard System Control. [ gm] [ 6.321216] [EVDEV] Keys found. Add event1: NOVATEK USB Keyboard. [ gm] [ 6.321271] [EVDEV] EV_REL flag found. Add event0: Logitech USB Optical Mouse. [ gm] [ 6.321320] Display mode: 1920x1080, 32 bit, landscape, 0 Hz, modeline "", DDC enabled, connector 0. [ gm] [ 6.459966] WTware concurrent licensing servers: [ gm] [ 6.460199] 178.163.82.7 [ gm] [ 6.460313] 185.149.244.1 [ gm] [ 6.460420] 157.245.219.8 [ gm] [ 6.460565] 212.71.233.220 [ gm] [ 6.460670] 80.234.34.181 [ KERNEL] [ 7.512605] hwmon hwmon0: Voltage normalised [ gm] [ 7.876007] 178.163.82.7 0 [ gm] [ 7.876125] 00000000:485454502F312E3120323030204F4B0D0A5669613A20312E3120464952455741 HTTP/1.1 200 OK..Via: 1.1 FIREWA [ gm] [ 7.876174] 00000020:4C4C0D0A436F6E6E656374696F6E3A20636C6F73650D0A50726F78792D436F6E LL..Connection: close..Proxy-Con [ gm] [ 7.876224] 00000040:6E656374696F6E3A20636C6F73650D0A446174653A205765642C203234204170 nection: close..Date: Wed, 24 Ap [ gm] [ 7.876285] 00000060:7220323032342031343A30363A353720474D540D0A436F6E74656E742D547970 r 2024 14:06:57 GMT..Content-Typ [ gm] [ 7.876331] 00000080:653A206170706C69636174696F6E2F782D7777772D666F726D2D75726C656E63 e: application/x-www-form-urlenc [ gm] [ 7.876377] 000000a0:6F6465640D0A5365727665723A206E67696E782F312E31382E300D0A416C6C6F oded..Server: nginx/1.18.0..Allo [ gm] [ 7.876424] 000000c0:773A204745542C20504F53542C20484541440D0A0D0A38463835334438424145 w: GET, POST, HEAD....8F853D8BAE [ gm] [ 7.876469] 000000e0:3346333337443032463632454131343537373244364539453441333031334538 3F337D02F62EA145772D6E9E4A3013E8 [ gm] [ 7.876517] 00000100:4541374339364242313043453134324235463536313131434436323433443543 EA7C96BB10CE142B5F56111CD6243D5C [ gm] [ 7.876564] 00000120:3534413333303333433636364246364341314431443038373239383243344345 54A33033C666BF6CA1D1D0872982C4CE [ gm] [ 7.876610] 00000140:3844374643383438383039373346353037383636453334323446423246383930 8D7FC84880973F507866E3424FB2F890 [ gm] [ 7.876656] 00000160:3132383546413437313336443333343631333541434244303639363231334341 1285FA47136D3346135ACBD0696213CA [ gm] [ 7.876702] 00000180:4337374346313741303137443932434241393042454532303036313437303231 C77CF17A017D92CBA90BEE2006147021 [ gm] [ 7.876749] 000001a0:3941314633303238423039433945413942414237444431343035373437393332 9A1F3028B09C9EA9BAB7DD1405747932 [ gm] [ 7.876795] 000001c0:3445433332453144333943433246354643363245333041343433373036384239 4EC32E1D39CC2F5FC62E30A4437068B9 [ gm] [ 7.876842] 000001e0:39353338424441303641394345303441423230414534 9538BDA06A9CE04AB20AE4 [ gm] [ 7.876888] Framebuffer device found. [ gm] [ 7.876937] LINELENBYTES 7680 [ gm] [ 7.876982] VLEN 8294400 [ gm] [ 7.878393] Use /usr/lib/ui32.so. [ gm] [ 7.905257] Unpack /bootmedia/packages/pi2-samba. [ gm] [ 8.220880] Load ISO 9660 and UDF CDROM filesystem drivers. [ gm] [ 8.221003] modprobe udf. [ gm] [ 8.228196] modprobe isofs. [ gm] [ 8.233860] Load usb storage driver. [ gm] [ 8.233982] modprobe scsi_mod. [ KERNEL] [ 8.241857] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ gm] [ 8.245641] modprobe usb-storage. [ KERNEL] [ 8.247393] SCSI subsystem initialized [ gm] [ 8.254362] modprobe uas. [ KERNEL] [ 8.256255] usbcore: registered new interface driver usb-storage [ gm] [ 8.260042] modprobe sd_mod. [ KERNEL] [ 8.262055] usbcore: registered new interface driver uas [ gm] [ 8.266341] Load fuse for NTFS filesystem driver. [ gm] [ 8.266474] modprobe fuse. /--- FILE "/usr/local/samba/lib/smb.conf" ----------------------- | [global] | security = SHARE | guest account = root | socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 | dns proxy = No | encrypt passwords = no | wins support = no | server string = WTware Terminal | log level = 0 | max log size = 1 | load printers = No | disable spoolss = Yes | show add printer wizard = No | unix charset = UTF8 | display charset = UTF8 | default case = upper | preserve case = yes | short preserve case = yes | os level = 1 | lm announce = no | preferred master = no | local master = no | domain master = no | browse list = no | enhanced browsing = no | deadtime = 1 | workgroup = WTWARE | netbios name = wtwB827EB2C2FF2 | [USB] | path = /mnt/usb-smb | read only = no | guest ok = Yes | guest only = Yes | [printer] | browseable = No \---------------------------------------------------- [ KERNEL] [ 8.276086] fuse: init (API version 7.37) [ gm] [ 8.275001] +--- Executing "/usr/local/samba/sbin/smbd -D" [ gm] [ 8.326872] +- Errorlevel: 0, output: | [No output] [ gm] [ 8.327079] +------------------------ [ gm] [ 8.327362] Unpack /bootmedia/packages/pi2-alsa. [ gm] [ 8.663434] modprobe snd-hrtimer. [ gm] [ 8.671646] modprobe snd-bcm2835. [ KERNEL] [ 8.680828] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ KERNEL] [ 8.684026] bcm2835_audio bcm2835_audio: card created with 4 channels [ gm] [ 8.686619] modprobe snd-usb-audio. [ KERNEL] [ 8.688258] bcm2835_audio bcm2835_audio: card created with 4 channels [ KERNEL] [ 8.696970] mc: Linux media interface: v0.10 [ KERNEL] [ 8.705867] usbcore: registered new interface driver snd-usb-audio /--- FILE "/proc/asound/devices" ----------------------- | 0: [ 0] : control | 16: [ 0- 0]: digital audio playback | 17: [ 0- 1]: digital audio playback | 32: [ 1] : control | 33: : timer | 48: [ 1- 0]: digital audio playback \---------------------------------------------------- [ gm] [ 9.704877] Run '/sbin/snd_start 100 100 100', log '', env '', pid ''. [ pfac] [ 9.705045] Run /sbin/snd_start 100 100 100. [ pfac] [ 9.705428] Ok, PID 404. [ snd_start] [ 9.713241] /------[ Onboard sound, level 100: 'bcm2835 HDMI 1' ]------ [ snd_start] [ 9.718460] | Sound device 'hw:0', card 'b1' 'bcm2835 HDMI 1'. [ snd_start] [ 9.718584] | Mixer name 'Broadcom Mixer'. [ snd_start] [ 9.718681] | Components ''. [ snd_start] [ 9.718776] | PCM Playback Volume: integer -10239..400 step 0, Volume 100% -> 400. [ snd_start] [ 9.718872] | PCM Playback Switch: boolean, turn ON. [ snd_start] [ 9.718966] | Skip 'IEC958 Playback Default' type 5. [ snd_start] [ 9.719060] | Skip 'IEC958 Playback Con Mask' type 5. [ snd_start] [ 9.719154] \----------------------------------------- [ snd_start] [ 9.719248] /------[ Onboard sound, level 100: 'bcm2835 Headphones' ]------ [ snd_start] [ 9.719343] | Sound device 'hw:1', card 'Headphones' 'bcm2835 Headphones'. [ snd_start] [ 9.719438] | Mixer name 'Broadcom Mixer'. [ snd_start] [ 9.719533] | Components ''. [ snd_start] [ 9.719629] | PCM Playback Volume: integer -10239..400 step 0, Volume 100% -> 400. [ snd_start] [ 9.719724] | PCM Playback Switch: boolean, turn ON. [ snd_start] [ 9.719817] \----------------------------------------- [ pfac] [ 9.721007] Process pid 404 terminated, status 00000000. /--- FILE "/etc/asound.conf" ----------------------- | pcm.!default { | type hw | card 0 | device 0 | } | ctl.!default { | type hw | card 0 | } \---------------------------------------------------- [ gm] [ 9.956152] Unpack /bootmedia/packages/pi2-sc. [ gm] [ 10.060216] Run scard daemon. Supported cards: [ pfac] [ 10.060325] Run /usr/sbin/pcscd --max-thread 512. [ gm] [ 10.060357] Gemplus. [ gm] [ 10.060410] Run pcscd. [ gm] [ 10.060469] Run '/usr/sbin/pcscd --max-thread 512', log '', env '', pid ''. [ pfac] [ 10.060593] Ok, PID 405. [ gm] [ 10.072436] Nobody can control terminal by VNC. [ gm] [ 10.072546] Nobody can control terminal by WTRC. [ pfac] [ 10.077899] Process pid 405 terminated, status 00000000. [ gm] [ 10.078701] Free ram before fork terminal client /sbin/rdpclient (session 1): 885816 Kb. [ pfac] [ 10.078755] Run /sbin/rdpclient 1. [ gm] [ 10.078782] Run '/sbin/rdpclient 1', log '/tmp/rdpclient.out', env '', pid ''. [ pfac] [ 10.078992] Ok, PID 412. [ rdpclient 412] [ 10.089035] RDP Terminal Client, WTware 6.2.20/RPi, pipe 1, pid 412. [ rdpclient 412] [ 10.089336] Use /usr/lib/ui32.so. [ rdpclient 412] [ 10.090750] Add smartcard redirection. [ rdpclient 412] [ 10.090946] [SCARD] Start redirection. [ rdpclient 412] [ 10.091943] Redirect sound. [ rdpclient 412] [ 10.099295] Make RDP session with 192.168.101.139, port 3389. [ rdpclient 412] [ 10.099642] No username. [ rdpclient 412] [ 10.099737] No password. [ rdpclient 412] [ 10.099867] No PIN. [ rdpclient 412] [ 10.099963] No domain. [ rdpclient 412] [ 10.100099] No shell. [ rdpclient 412] [ 10.100187] No directory. [ rdpclient 412] [ 10.100276] Window: 1920x1080@32. [ rdpclient 412] [ 10.100366] PFlags 0x0000002F. [ rdpclient 412] [ 10.100452] Keyboard 00000816:00000000. [ rdpclient 412] [ 10.100536] My hostname "wtwB827EB2C2FF2". [ rdpclient 412] [ 10.100626] TCP: connecting to 192.168.101.139:3389 (default timeouts). [ rdpclient 412] [ 10.102158] [TCP] Connection with 192.168.101.139 established. [ rdpclient 412] [ 10.102254] [TCP] Turn keepalive on. [ rdpclient 412] [ 10.103070] Free ram after buffers allocation: 884840 KB. [ gm] [ 10.111834] Ask login and password for NLA.