15-55-46-760| [wtc.exe] Failed to connect to 10.172.17.151:779. 15-55-48-865| [DHCP] Processing DHCPDISCOVER package... 15-55-48-865| [DHCP] Determine IP for DISCOVER... 15-55-48-865| [DHCP] Sending ARP to check if IP 10.172.17.151 is busy... 15-55-49-167| [DHCP] IP 10.172.17.151 for MAC B8:27:EB:2E:F5:7B determined from terminalDHCP parameters. 15-55-49-167| [DHCP] Stored in catalog IP 10.172.17.151 for MAC B8:27:EB:2E:F5:7B 15-55-49-205| [DHCP] Send DHCPOFFER IP: 10.172.17.151. 15-55-49-206| [DHCP] Sent 327 bytes to 10.172.17.151:68. 15-55-49-451| [wtc.exe] Failed to connect to 10.172.17.151:779. 15-55-50-290| [DHCP] Processing DHCPREQUEST package... 15-55-50-290| [DHCP] Check IP from REQUEST... 15-55-50-290| [DHCP] IP 10.172.17.151 for MAC B8:27:EB:2E:F5:7B found in requestedIP DHCP option. 15-55-50-290| [DHCP] Correct IP 10.172.17.151 found in REQUEST. 15-55-50-290| [DHCP] Send DHCPACK. 15-56-00-352| WTware 6.0.58/RPi supervisor. 15-56-00-352| [ KERNEL] [ 0.000000] Booting Linux on physical CPU 0x0 15-56-00-352| [ KERNEL] [ 0.000000] Linux version 5.10.63-v7 (aka@c26) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #14 SMP Mon Oct 11 17:53:49 +04 2021 15-56-00-352| [ KERNEL] [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d 15-56-00-352| [ KERNEL] [ 0.000000] CPU: div instructions available: patching division code 15-56-00-352| [ KERNEL] [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache 15-56-00-352| [ KERNEL] [ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3 15-56-00-352| [ KERNEL] [ 0.000000] Memory policy: Data cache writealloc 15-56-00-352| [ KERNEL] [ 0.000000] Reserved memory: created CMA memory pool at 0x36000000, size 64 MiB 15-56-00-352| [ KERNEL] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool 15-56-00-352| [ KERNEL] [ 0.000000] Zone ranges: 15-56-00-352| [ KERNEL] [ 0.000000] DMA [mem 0x0000000000000000-0x0000000039ffffff] 15-56-00-352| [ KERNEL] [ 0.000000] Normal empty 15-56-00-352| [ KERNEL] [ 0.000000] Movable zone start for each node 15-56-00-352| [ KERNEL] [ 0.000000] Early memory node ranges 15-56-00-352| [ KERNEL] [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000039ffffff] 15-56-00-352| [ KERNEL] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000039ffffff] 15-56-00-352| [ KERNEL] [ 0.000000] On node 0 totalpages: 237568 15-56-00-352| [ KERNEL] [ 0.000000] DMA zone: 1856 pages used for memmap 15-56-00-352| [ KERNEL] [ 0.000000] DMA zone: 0 pages reserved 15-56-00-352| [ KERNEL] [ 0.000000] DMA zone: 237568 pages, LIFO batch:63 15-56-00-352| [ KERNEL] [ 0.000000] percpu: Embedded 15 pages/cpu s29580 r8192 d23668 u61440 15-56-00-352| [ KERNEL] [ 0.000000] pcpu-alloc: s29580 r8192 d23668 u61440 alloc=15*4096 15-56-00-352| [ KERNEL] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 15-56-00-352| [ KERNEL] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 235712 15-56-00-352| [ KERNEL] [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbdepth=32 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 quiet wtboot=mmc 15-56-00-352| [ KERNEL] [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) 15-56-00-352| [ KERNEL] [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) 15-56-00-352| [ KERNEL] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off 15-56-00-352| [ KERNEL] [ 0.000000] Memory: 865876K/950272K available (5120K kernel code, 572K rwdata, 740K rodata, 3072K init, 355K bss, 18860K reserved, 65536K cma-reserved) 15-56-00-352| [ KERNEL] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 15-56-00-352| [ KERNEL] [ 0.000000] rcu: Hierarchical RCU implementation. 15-56-00-352| [ KERNEL] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. 15-56-00-352| [ KERNEL] [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 15-56-00-352| [ KERNEL] [ 0.000000] random: get_random_bytes called from 0x80700b9c with crng_init=0 15-56-00-352| [ KERNEL] [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). 15-56-00-352| [ KERNEL] [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns 15-56-00-352| [ KERNEL] [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns 15-56-00-352| [ KERNEL] [ 0.000019] Switching to timer-based delay loop, resolution 52ns 15-56-00-352| [ KERNEL] [ 0.000208] Console: colour dummy device 80x30 15-56-00-352| [ KERNEL] [ 0.000255] printk: console [tty0] enabled 15-56-00-352| [ KERNEL] [ 0.000294] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) 15-56-00-352| [ KERNEL] [ 0.000312] pid_max: default: 32768 minimum: 301 15-56-00-352| [ KERNEL] [ 0.000488] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) 15-56-00-352| [ KERNEL] [ 0.000503] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) 15-56-00-352| [ KERNEL] [ 0.001144] CPU: Testing write buffer coherency: ok 15-56-00-352| [ KERNEL] [ 0.001399] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 15-56-00-352| [ KERNEL] [ 0.001833] Setting up static identity map for 0x100000 - 0x10003c 15-56-00-352| [ KERNEL] [ 0.001916] rcu: Hierarchical SRCU implementation. 15-56-00-352| [ KERNEL] [ 0.002213] smp: Bringing up secondary CPUs ... 15-56-00-352| [ KERNEL] [ 0.002815] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 15-56-00-352| [ KERNEL] [ 0.003470] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 15-56-00-352| [ KERNEL] [ 0.004070] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 15-56-00-352| [ KERNEL] [ 0.004158] smp: Brought up 1 node, 4 CPUs 15-56-00-352| [ KERNEL] [ 0.004172] SMP: Total of 4 processors activated (153.60 BogoMIPS). 15-56-00-352| [ KERNEL] [ 0.004178] CPU: All CPU(s) started in HYP mode. 15-56-00-352| [ KERNEL] [ 0.004183] CPU: Virtualization extensions available. 15-56-00-352| [ KERNEL] [ 0.004693] devtmpfs: initialized 15-56-00-352| [ KERNEL] [ 0.015999] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 15-56-00-352| [ KERNEL] [ 0.016335] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns 15-56-00-352| [ KERNEL] [ 0.016357] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) 15-56-00-352| [ KERNEL] [ 0.018664] pinctrl core: initialized pinctrl subsystem 15-56-00-352| [ KERNEL] [ 0.020001] NET: Registered protocol family 16 15-56-00-352| [ KERNEL] [ 0.022265] DMA: preallocated 1024 KiB pool for atomic coherent allocations 15-56-00-352| [ KERNEL] [ 0.027702] thermal_sys: Registered thermal governor 'step_wise' 15-56-00-352| [ KERNEL] [ 0.028287] Serial: AMBA PL011 UART driver 15-56-00-352| [ KERNEL] [ 0.039850] bcm2835-mbox 3f00b880.mailbox: mailbox enabled 15-56-00-352| [ KERNEL] [ 0.060066] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-04-21T15:49:36, variant start 15-56-00-352| [ KERNEL] [ 0.070081] raspberrypi-firmware soc:firmware: Firmware hash is a48d332c35ee1c1c1ab433228e23317f62dcc5fb 15-56-00-352| [ KERNEL] [ 0.115106] cryptd: max_cpu_qlen set to 1000 15-56-00-352| [ KERNEL] [ 0.117256] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1 15-56-00-352| [ KERNEL] [ 0.119542] usbcore: registered new interface driver usbfs 15-56-00-352| [ KERNEL] [ 0.119648] usbcore: registered new interface driver hub 15-56-00-352| [ KERNEL] [ 0.119707] usbcore: registered new device driver usb 15-56-00-352| [ KERNEL] [ 0.121496] clocksource: Switched to clocksource arch_sys_counter 15-56-00-352| [ KERNEL] [ 0.134057] NET: Registered protocol family 2 15-56-00-352| [ KERNEL] [ 0.134296] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) 15-56-00-352| [ KERNEL] [ 0.135392] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) 15-56-00-352| [ KERNEL] [ 0.135424] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) 15-56-00-352| [ KERNEL] [ 0.135533] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) 15-56-00-352| [ KERNEL] [ 0.135719] TCP: Hash tables configured (established 8192 bind 8192) 15-56-00-352| [ KERNEL] [ 0.135849] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) 15-56-00-352| [ KERNEL] [ 0.135895] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) 15-56-00-352| [ KERNEL] [ 0.136083] NET: Registered protocol family 1 15-56-00-352| [ KERNEL] [ 1.097207] Initialise system trusted keyrings 15-56-00-352| [ KERNEL] [ 1.100593] workingset: timestamp_bits=30 max_order=18 bucket_order=0 15-56-00-352| [ KERNEL] [ 1.239253] Key type asymmetric registered 15-56-00-352| [ KERNEL] [ 1.239268] Asymmetric key parser 'x509' registered 15-56-00-352| [ KERNEL] [ 1.239342] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) 15-56-00-352| [ KERNEL] [ 1.242193] bcm2708_fb soc:fb: FB found 1 display(s) 15-56-00-352| [ KERNEL] [ 1.279453] Console: switching to colour frame buffer device 240x67 15-56-00-352| [ KERNEL] [ 1.314704] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1920x1080 15-56-00-352| [ KERNEL] [ 1.322230] bcm2835-rng 3f104000.rng: hwrng registered 15-56-00-352| [ KERNEL] [ 1.322712] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) 15-56-00-352| [ KERNEL] [ 1.325940] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 15-56-00-352| [ KERNEL] [ 1.331639] zram: Added device: zram0 15-56-00-352| [ KERNEL] [ 1.333952] libphy: Fixed MDIO Bus: probed 15-56-00-352| [ KERNEL] [ 1.334023] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) 15-56-00-352| [ KERNEL] [ 2.062146] Core Release: 2.80a 15-56-00-352| [ KERNEL] [ 2.062160] Setting default values for core params 15-56-00-352| [ KERNEL] [ 2.062184] Finished setting default values for core params 15-56-00-352| [ KERNEL] [ 2.262450] Using Buffer DMA mode 15-56-00-352| [ KERNEL] [ 2.262458] Periodic Transfer Interrupt Enhancement - disabled 15-56-00-352| [ KERNEL] [ 2.262466] Multiprocessor Interrupt Enhancement - disabled 15-56-00-352| [ KERNEL] [ 2.262474] OTG VER PARAM: 0, OTG VER FLAG: 0 15-56-00-352| [ KERNEL] [ 2.262487] Dedicated Tx FIFOs mode 15-56-00-352| [ KERNEL] [ 2.263137] 15-56-00-352| [ KERNEL] [ 2.263153] WARN::dwc_otg_hcd_init:1072: FIQ DMA bounce buffers: virt = b6114000 dma = 0xf6114000 len=9024 15-56-00-352| [ KERNEL] [ 2.263182] FIQ FSM acceleration enabled for : 15-56-00-352| [ KERNEL] [ 2.263182] Non-periodic Split Transactions 15-56-00-352| [ KERNEL] [ 2.263182] Periodic Split Transactions 15-56-00-352| [ KERNEL] [ 2.263182] High-Speed Isochronous Endpoints 15-56-00-352| [ KERNEL] [ 2.263182] Interrupt/Control Split Transaction hack enabled 15-56-00-352| [ KERNEL] [ 2.263190] dwc_otg: Microframe scheduler enabled 15-56-00-352| [ KERNEL] [ 2.263236] 15-56-00-352| [ KERNEL] [ 2.263246] WARN::hcd_init_fiq:457: FIQ on core 1 15-56-00-352| [ KERNEL] [ 2.263252] 15-56-00-352| [ KERNEL] [ 2.263260] WARN::hcd_init_fiq:458: FIQ ASM at 8043c3dc length 36 15-56-00-352| [ KERNEL] [ 2.263267] 15-56-00-352| [ KERNEL] [ 2.263274] WARN::hcd_init_fiq:496: MPHI regs_base at ba810000 15-56-00-352| [ KERNEL] [ 2.263297] dwc_otg 3f980000.usb: DWC OTG Controller 15-56-00-352| [ KERNEL] [ 2.263330] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 15-56-00-352| [ KERNEL] [ 2.263368] dwc_otg 3f980000.usb: irq 89, io mem 0x00000000 15-56-00-352| [ KERNEL] [ 2.263413] Init: Port Power? op_state=1 15-56-00-352| [ KERNEL] [ 2.263419] Init: Power Port (0) 15-56-00-352| [ KERNEL] [ 2.263585] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 15-56-00-352| [ KERNEL] [ 2.263596] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 15-56-00-352| [ KERNEL] [ 2.263605] usb usb1: Product: DWC OTG Controller 15-56-00-352| [ KERNEL] [ 2.263614] usb usb1: Manufacturer: Linux 5.10.63-v7 dwc_otg_hcd 15-56-00-352| [ KERNEL] [ 2.263622] usb usb1: SerialNumber: 3f980000.usb 15-56-00-352| [ KERNEL] [ 2.264259] hub 1-0:1.0: USB hub found 15-56-00-352| [ KERNEL] [ 2.264294] hub 1-0:1.0: 1 port detected 15-56-00-352| [ KERNEL] [ 2.265374] dwc_otg: FIQ enabled 15-56-00-352| [ KERNEL] [ 2.265389] dwc_otg: NAK holdoff enabled 15-56-00-352| [ KERNEL] [ 2.265395] dwc_otg: FIQ split-transaction FSM enabled 15-56-00-352| [ KERNEL] [ 2.265408] Module dwc_common_port init 15-56-00-352| [ KERNEL] [ 2.269165] usbcore: registered new interface driver usbtouchscreen 15-56-00-352| [ KERNEL] [ 2.270900] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer 15-56-00-352| [ KERNEL] [ 2.271649] sdhci: Secure Digital Host Controller Interface driver 15-56-00-352| [ KERNEL] [ 2.271663] sdhci: Copyright(c) Pierre Ossman 15-56-00-352| [ KERNEL] [ 2.272381] mmc-bcm2835 3f300000.mmcnr: could not get clk, deferring probe 15-56-00-352| [ KERNEL] [ 2.273139] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe 15-56-00-352| [ KERNEL] [ 2.273375] sdhci-pltfm: SDHCI platform and OF driver helper 15-56-00-352| [ KERNEL] [ 2.273759] hid: raw HID events driver (C) Jiri Kosina 15-56-00-352| [ KERNEL] [ 2.276769] usbcore: registered new interface driver usbhid 15-56-00-352| [ KERNEL] [ 2.276784] usbhid: USB HID core driver 15-56-00-352| [ KERNEL] [ 2.294070] bcm2835_vc_sm_cma_probe: Videocore shared memory driver 15-56-00-352| [ KERNEL] [ 2.294099] [vc_sm_connected_init]: start 15-56-00-352| [ KERNEL] [ 2.302539] [vc_sm_connected_init]: installed successfully 15-56-00-352| [ KERNEL] [ 2.303041] NET: Registered protocol family 17 15-56-00-352| [ KERNEL] [ 2.303202] Registering SWP/SWPB emulation handler 15-56-00-352| [ KERNEL] [ 2.305219] Loading compiled-in X.509 certificates 15-56-00-352| [ KERNEL] [ 2.307679] uart-pl011 3f201000.serial: cts_event_workaround enabled 15-56-00-352| [ KERNEL] [ 2.307759] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 114, base_baud = 0) is a PL011 rev2 15-56-00-352| [ KERNEL] [ 2.309553] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver 15-56-00-352| [ KERNEL] [ 2.311414] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0 15-56-00-352| [ KERNEL] [ 2.311436] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated 15-56-00-352| [ KERNEL] [ 2.338276] sdhost: log_buf @ (ptrval) (f6113000) 15-56-00-352| [ KERNEL] [ 2.377301] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) 15-56-00-352| [ KERNEL] [ 2.378839] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) 15-56-00-352| [ KERNEL] [ 2.380367] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) 15-56-00-352| [ KERNEL] [ 2.383109] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) 15-56-00-352| [ KERNEL] [ 2.388241] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) 15-56-00-352| [ KERNEL] [ 2.388727] of_cfs_init 15-56-00-352| [ KERNEL] [ 2.388914] of_cfs_init: OK 15-56-00-352| [ KERNEL] [ 2.410182] Indeed it is in host mode hprt0 = 00021501 15-56-00-352| [ KERNEL] [ 2.486352] Freeing unused kernel memory: 3072K 15-56-00-352| [ KERNEL] [ 2.492028] random: fast init done 15-56-00-352| [ KERNEL] [ 2.532823] mmc1: new high speed SDIO card at address 0001 15-56-00-352| [ KERNEL] [ 2.543704] mmc0: host does not support reading read-only switch, assuming write-enable 15-56-00-352| [ KERNEL] [ 2.548200] mmc0: new high speed SDHC card at address aaaa 15-56-00-352| [ KERNEL] [ 2.548969] mmcblk0: mmc0:aaaa SD32G 29.7 GiB 15-56-00-352| [ KERNEL] [ 2.550322] mmcblk0: p1 15-56-00-352| [ KERNEL] [ 2.586189] Run /init as init process 15-56-00-352| [ KERNEL] [ 2.586200] with arguments: 15-56-00-352| [ KERNEL] [ 2.586205] /init 15-56-00-352| [ KERNEL] [ 2.586211] with environment: 15-56-00-352| [ KERNEL] [ 2.586216] HOME=/ 15-56-00-352| [ KERNEL] [ 2.586221] TERM=linux 15-56-00-352| [ KERNEL] [ 2.586227] wtboot=mmc 15-56-00-352| [ KERNEL] [ 2.631600] usb 1-1: new high-speed USB device number 2 using dwc_otg 15-56-00-352| [ KERNEL] [ 2.631789] Indeed it is in host mode hprt0 = 00001101 15-56-00-352| [ hotplug] [ 2.839314] Block device 254:0. No action. 15-56-00-352| [ hotplug] [ 2.852462] Block device 179:0. No action. 15-56-00-352| [ hotplug] [ 2.852579] Block device 179:1. No action. 15-56-00-352| [ KERNEL] [ 2.881818] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 15-56-00-352| [ KERNEL] [ 2.881837] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 15-56-00-352| [ KERNEL] [ 2.882526] hub 1-1:1.0: USB hub found 15-56-00-352| [ KERNEL] [ 2.882646] hub 1-1:1.0: 4 ports detected 15-56-00-352| [ pfac] [ 2.936525] Run /sbin/initrd. 15-56-00-352| [ pfac] [ 2.936856] Ok, PID 685. 15-56-00-352| [ initrd] [ 2.940787] WTware 6.0.58/RPi shell. 15-56-00-352| [ initrd] [ 2.941205] Load font 'ter-c32b.psf', console 120x33. 15-56-00-352| [ initrd] [ 2.983880] HDD/MMC/SD boot. 15-56-00-352| [ initrd] [ 2.984027] No device '/dev/fb1'. 15-56-00-352| [ initrd] [ 3.042702] Success: /dev/mmcblk0p1 mounted to /bootmedia. 15-56-00-352| /--- FILE "/bootmedia/config.txt" ----------------------- 15-56-00-352| | # For more options and information see: 15-56-00-352| | # 15-56-00-352| | # https://www.raspberrypi.org/documentation/computers/config_txt.html#what-is-config-txt 15-56-00-352| | # 15-56-00-352| | disable_overscan=1 15-56-00-352| | # Uncomment if hdmi display is not detected and composite is being output. 15-56-00-352| | #hdmi_force_hotplug=1 15-56-00-352| | # Force the monitor to HDMI mode so that sound will be sent over HDMI cable. 15-56-00-352| | #hdmi_drive=2 15-56-00-352| | # Uncomment to increase signal to HDMI, if you have interference, blanking, or 15-56-00-352| | # no display. 15-56-00-352| | #config_hdmi_boost=4 15-56-00-352| | # Uncomment to overclock the arm. 700 MHz is the default. 15-56-00-352| | #arm_freq=800 15-56-00-352| | gpu_mem=96 15-56-00-352| | disable_splash=1 15-56-00-352| | framebuffer_depth=32 15-56-00-352| | # Uncomment for 16-bit color. 15-56-00-352| | #framebuffer_depth=16 15-56-00-352| | # Enable onboard audio (HDMI or jack). 15-56-00-352| | dtparam=audio=on 15-56-00-352| | # Removes the warning overlay. 15-56-00-352| | #avoid_warnings=1 15-56-00-352| | # Additionally allows turbo when low-voltage is present. 15-56-00-352| | #avoid_warnings=2 15-56-00-352| | [pi4] 15-56-00-352| | max_framebuffers=2 15-56-00-352| | [all] 15-56-00-352| | # Uncomment these two lines to set display resolution: 15-56-00-352| | #hdmi_group=2 15-56-00-352| | #hdmi_mode=58 15-56-00-352| | # 15-56-00-352| | # Specify correct value in hdmi_mode= line from the list of valid values: 15-56-00-352| | # 800x600: hdmi_mode=9 15-56-00-352| | # 1024x768: hdmi_mode=16 15-56-00-352| | # 1280x1024: hdmi_mode=35 15-56-00-352| | # 1360x768: hdmi_mode=39 15-56-00-352| | # 1400x1050: hdmi_mode=42 15-56-00-352| | # 1440x900: hdmi_mode=47 15-56-00-352| | # 1600x1200: hdmi_mode=51 15-56-00-352| | # 1680x1050: hdmi_mode=58 15-56-00-352| | # 1366x768: hdmi_mode=81 15-56-00-352| | # 1920x1080: hdmi_mode=82 15-56-00-352| | # 1920x1200: hdmi_mode=69 15-56-00-352| | # 15-56-00-352| | # Find more resolutions in manual: 15-56-00-352| | # https://www.raspberrypi.org/documentation/computers/config_txt.html#video-options 15-56-00-352| | # 15-56-00-352| | # Uncomment six lines with such syntax and right hdmi_mode= values for 15-56-00-352| | # dual displays on Raspberry Pi 4: 15-56-00-352| | # 15-56-00-352| | #[HDMI:0] 15-56-00-352| | # hdmi_group=2 15-56-00-352| | # hdmi_mode=42 15-56-00-352| | #[HDMI:1] 15-56-00-352| | # hdmi_group=2 15-56-00-352| | # hdmi_mode=58 15-56-00-352| \---------------------------------------------------- 15-56-00-352| [ KERNEL] [ 3.201520] usb 1-1.1: new high-speed USB device number 3 using dwc_otg 15-56-00-352| [ KERNEL] [ 3.331729] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 15-56-00-352| [ KERNEL] [ 3.331741] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 15-56-00-352| [ KERNEL] [ 3.332357] hub 1-1.1:1.0: USB hub found 15-56-00-352| [ KERNEL] [ 3.332471] hub 1-1.1:1.0: 3 ports detected 15-56-00-352| [ KERNEL] [ 3.651521] usb 1-1.1.2: new full-speed USB device number 4 using dwc_otg 15-56-00-352| [ KERNEL] [ 3.787956] usb 1-1.1.2: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10 15-56-00-352| [ KERNEL] [ 3.787968] usb 1-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 15-56-00-352| [ KERNEL] [ 3.787977] usb 1-1.1.2: Product: USB Receiver 15-56-00-352| [ KERNEL] [ 3.787986] usb 1-1.1.2: Manufacturer: Logitech 15-56-00-352| [ KERNEL] [ 3.808947] logitech-djreceiver 0003:046D:C52B.0003: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-3f980000.usb-1.1.2/input2 15-56-00-352| [ KERNEL] [ 3.965521] input: Logitech M705 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.2/0003:046D:C52B.0003/0003:046D:101B.0004/input/input0 15-56-00-352| [ KERNEL] [ 3.965937] logitech-hidpp-device 0003:046D:101B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M705] on usb-3f980000.usb-1.1.2/input2:1 15-56-00-352| [ KERNEL] [ 4.071524] usb 1-1.1.3: new low-speed USB device number 5 using dwc_otg 15-56-00-352| [ KERNEL] [ 4.218082] usb 1-1.1.3: New USB device found, idVendor=413c, idProduct=2107, bcdDevice= 1.04 15-56-00-352| [ KERNEL] [ 4.218095] usb 1-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 15-56-00-352| [ KERNEL] [ 4.218104] usb 1-1.1.3: Product: Dell USB Entry Keyboard 15-56-00-352| [ KERNEL] [ 4.218114] usb 1-1.1.3: Manufacturer: DELL 15-56-00-352| [ KERNEL] [ 4.232193] input: DELL Dell USB Entry Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.0/0003:413C:2107.0005/input/input1 15-56-00-352| [ KERNEL] [ 4.302648] hid-generic 0003:413C:2107.0005: input,hidraw2: USB HID v1.11 Keyboard [DELL Dell USB Entry Keyboard] on usb-3f980000.usb-1.1.3/input0 15-56-00-352| /--- FILE "/bootmedia/configs/initrd.wtc" ----------------------- 15-56-00-352| | [BOM] 15-56-00-352| | clientIP=* 15-56-00-352| | config=local 15-56-00-352| | netmedia=wifi 15-56-00-352| | tftpIP=10.138.1.11 15-56-00-352| \---------------------------------------------------- 15-56-00-352| [ initrd] [ 4.482585] Do not cache package files. 15-56-00-352| [ initrd] [ 4.482716] WTpassword empty. 15-56-00-352| [ initrd] [ 4.482882] Unpack /bootmedia/packages/pi2-lib. 15-56-00-352| [ KERNEL] [ 4.611560] usb 1-1.1.1: new high-speed USB device number 6 using dwc_otg 15-56-00-352| [ KERNEL] [ 4.741990] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800, bcdDevice= 3.00 15-56-00-352| [ KERNEL] [ 4.742009] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 15-56-00-352| [ initrd] [ 6.475905] USB: 046d:c52b Logitech, Inc. Unifying Receiver. 15-56-00-352| [ initrd] [ 6.476056] USB: 0424:2514 Microchip Technology, Inc. (formerly SMSC) USB 2.0 Hub. 15-56-00-352| [ initrd] [ 6.476155] USB: 413c:2107 Dell Computer Corp. KB212-B Quiet Key Keyboard. 15-56-00-352| [ initrd] [ 6.476231] USB: 0424:7800 Microchip Technology, Inc. (formerly SMSC). 15-56-00-352| [ initrd] [ 6.517833] Load Wi-Fi wireless network card driver. 15-56-00-352| [ initrd] [ 6.518033] Unpack /bootmedia/packages/pi2-dbus. 15-56-00-352| [ initrd] [ 6.889461] +--- Executing "/usr/bin/dbus-uuidgen --ensure" 15-56-00-352| [ KERNEL] [ 6.890504] random: crng init done 15-56-00-352| [ initrd] [ 6.898854] +- Errorlevel: 0, output: 15-56-00-352| | 15-56-00-352| [ initrd] [ 6.899155] +------------------------ 15-56-00-352| [ initrd] [ 6.899238] +--- Executing "/usr/bin/dbus-daemon --system " 15-56-00-352| [ initrd] [ 6.935563] +- Errorlevel: 0, output: 15-56-00-352| | 15-56-00-352| [ initrd] [ 6.935882] +------------------------ 15-56-00-352| [ initrd] [ 6.935963] Run '/usr/bin/dbus-daemon --session --address=unix:path=/run/user/1007/bus', log '', env '', pid ''. 15-56-00-352| [ pfac] [ 6.936120] Run /usr/bin/dbus-daemon --session --address=unix:path=/run/user/1007/bus. 15-56-00-352| [ initrd] [ 6.936338] Unpack /bootmedia/packages/pi2-xnet. 15-56-00-352| [ pfac] [ 6.936425] Ok, PID 737. 15-56-00-352| [ initrd] [ 7.288612] Overwrite /bin/bash with real file. 15-56-00-352| [ initrd] [ 10.756061] Unpack /bootmedia/packages/fw-xnet. 15-56-00-352| [ initrd] [ 12.910529] Find SDIO device 'sdio:c02v02D0dA9A6'. 15-56-00-352| [ initrd] [ 12.910701] Load driver for Pi 3 onboard Wi-Fi. 15-56-00-352| [ initrd] [ 12.910781] modprobe brcmfmac. 15-56-00-352| [ KERNEL] [ 12.932499] cfg80211: Loading compiled-in X.509 certificates for regulatory database 15-56-00-352| [ KERNEL] [ 12.942197] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' 15-56-00-352| [ KERNEL] [ 12.969623] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 15-56-00-352| [ KERNEL] [ 12.971253] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.txt failed with error -2 15-56-00-352| [ KERNEL] [ 13.109656] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 15-56-00-352| [NEED FIRMWARE!] Request for firmware 'brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.clm_blob'. 15-56-00-352| [ KERNEL] [ 13.109770] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.clm_blob failed with error -2 15-56-00-352| [ KERNEL] [ 13.109784] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 15-56-00-352| [ KERNEL] [ 13.116647] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan 4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e 15-56-00-352| [ KERNEL] [ 13.209146] brcmfmac mmc1:0001:1 eth0: renamed from wlan0 15-56-00-352| [ initrd] [ 13.295202] Copy /bootmedia/configs/wpa_supplicant.conf to /etc/wpa.conf. 15-56-00-352| [ initrd] [ 13.295879] /bootmedia/configs/wpa_supplicant.conf -> /etc/wpa.conf, 117 bytes copied. 15-56-00-352| /--- FILE "/etc/wpa.conf" ----------------------- 15-56-00-352| | ctrl_interface=/var/run/wpa_supplicant 15-56-00-352| | network={ 15-56-00-352| | ssid="Bbox-71E7844B" 15-56-00-352| Skip 'psk='. 15-56-00-352| | } 15-56-00-352| \---------------------------------------------------- 15-56-00-352| [ initrd] [ 13.296259] +--- Executing "/sbin/wpa_supplicant -D nl80211,wext -B -c /etc/wpa.conf -i eth0 -f /tmp/wpa_supplicant.out" 15-56-00-352| [ WPA] [ 13.324453] Successfully initialized wpa_supplicant 15-56-00-352| [ WPA] [ 13.389127] rfkill: Cannot open RFKILL control device 15-56-00-352| [ KERNEL] [ 13.416200] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled 15-56-00-352| [ WPA] [ 13.610476] rfkill: Cannot get wiphy information 15-56-00-352| [ initrd] [ 13.621667] +- Errorlevel: 0, output: 15-56-00-352| | 15-56-00-352| [ initrd] [ 13.622023] +------------------------ 15-56-00-352| [ initrd] [ 13.630418] State SCANNING before handshake, do nothing. 15-56-00-352| [ initrd] [ 13.938288] State SCANNING before handshake, do nothing. 15-56-00-352| [ initrd] [ 14.246368] State SCANNING before handshake, do nothing. 15-56-00-352| [ initrd] [ 14.554412] State SCANNING before handshake, do nothing. 15-56-00-352| [ initrd] [ 14.862243] State SCANNING before handshake, do nothing. 15-56-00-352| [ initrd] [ 15.170395] State SCANNING before handshake, do nothing. 15-56-00-352| [ initrd] [ 15.478154] State SCANNING before handshake, do nothing. 15-56-00-352| [ initrd] [ 15.785958] State SCANNING before handshake, do nothing. 15-56-00-352| [ initrd] [ 16.094049] State SCANNING before handshake, do nothing. 15-56-00-352| [ WPA] [ 16.315547] eth0: Trying to associate with SSID 'Bbox-71E7844B' 15-56-00-352| [ initrd] [ 16.402218] State ASSOCIATING before handshake, do nothing. 15-56-00-352| [ initrd] [ 16.710078] State ASSOCIATING before handshake, do nothing. 15-56-00-352| [ initrd] [ 17.017838] State ASSOCIATING before handshake, do nothing. 15-56-00-352| [ initrd] [ 17.325671] State ASSOCIATING before handshake, do nothing. 15-56-00-352| [ initrd] [ 17.633528] State ASSOCIATING before handshake, do nothing. 15-56-00-352| [ initrd] [ 17.941312] State ASSOCIATING before handshake, do nothing. 15-56-00-352| [ initrd] [ 18.249112] State ASSOCIATING before handshake, do nothing. 15-56-00-352| [ initrd] [ 18.556884] State ASSOCIATING before handshake, do nothing. 15-56-00-352| [ initrd] [ 18.864713] State ASSOCIATING before handshake, do nothing. 15-56-00-352| [ initrd] [ 19.172531] State ASSOCIATING before handshake, do nothing. 15-56-00-352| [ WPA] [ 19.316714] eth0: Associated with 94:a6:7e:4f:cf:a8 15-56-00-352| [ WPA] [ 19.316822] eth0: CTRL-EVENT-CONNECTED - Connection to 94:a6:7e:4f:cf:a8 completed [id=0 id_str=] 15-56-00-352| [ WPA] [ 19.317628] eth0: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0 15-56-00-352| [ initrd] [ 19.480716] wpa_state=COMPLETED 15-56-00-352| [ initrd] [ 19.480843] WTpassword empty. 15-56-00-352| [ initrd] [ 19.837793] dhcp: 355 bytes from 10.172.17.178. 15-56-00-352| [ initrd] [ 19.837894] 00000000:0000014F00000000001100000AAC11B20AAC119700430044014F000002010600 ...O..............C.D.O...... 15-56-00-352| [ initrd] [ 19.837972] 00000020:67458B6B00000000000000000AAC11970AAC11B200000000B827EB2EF57B0000 gE.k...................'...{.. 15-56-00-352| [ initrd] [ 19.838079] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................ 15-56-00-352| [ initrd] [ 19.838155] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................ 15-56-00-352| [ initrd] [ 19.838230] 00000080:0000000000000000362E302E35385C6B65726E656C372E696D67000000000000 ........6.0.58\kernel7.img...... 15-56-00-352| [ initrd] [ 19.838303] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................ 15-56-00-352| [ initrd] [ 19.838377] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................ 15-56-00-352| [ initrd] [ 19.838451] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................ 15-56-00-352| [ initrd] [ 19.838524] 00000100:00000000000000006382536335010236040AAC11B20104FFFFFF0006100AAC10 ........c.Sc5..6............. 15-56-00-352| [ initrd] [ 19.838598] 00000120:FE0A8A010B0A8A01080AAC11FE1A0205DC420E31302E3137322E31372E313738 ...............B.10.172.17.178 15-56-00-352| [ initrd] [ 21.010225] dhcp: 328 bytes from 10.172.17.254. 15-56-00-352| [ initrd] [ 21.010324] 00000000:0000013400000000001100000AAC11FEFFFFFFFF004300440134000002010600 ...4...............C.D.4...... 15-56-00-352| [ initrd] [ 21.010401] 00000020:67458B6B0000800000000000000000000000000000000000B827EB2EF57B0000 gE.k.....................'...{.. 15-56-00-352| [ initrd] [ 21.010476] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................ 15-56-00-352| [ initrd] [ 21.010553] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................ 15-56-00-352| [ initrd] [ 21.010627] 00000080:0000000000000000000000000000000000000000000000000000000000000000 ................................ 15-56-00-352| [ initrd] [ 21.010702] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................ 15-56-00-352| [ initrd] [ 21.010775] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................ 15-56-00-352| [ initrd] [ 21.010873] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................ 15-56-00-352| [ initrd] [ 21.010949] 00000100:00000000000000006382536335010636040AAC11FE380F77726F6E6720736572 ........c.Sc5..6....8.wrong ser 15-56-00-352| [ initrd] [ 21.011022] 00000120:7665722D4944FF00000000000000000000000000000000000000000000000000 ver-ID.......................... 15-56-00-352| [ initrd] [ 21.011096] dhcp: Got 6 instead of ACK. 15-56-00-352| [ initrd] [ 21.011168] dhcp: 355 bytes from 10.172.17.178. 15-56-00-352| [ initrd] [ 21.011241] 00000000:0000014F00000000001100000AAC11B2FFFFFFFF00430044014F000002010600 ...O...............C.D.O...... 15-56-00-352| [ initrd] [ 21.011314] 00000020:67458B6B00000000000000000AAC11970AAC11B200000000B827EB2EF57B0000 gE.k...................'...{.. 15-56-00-352| [ initrd] [ 21.011388] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................ 15-56-00-352| [ initrd] [ 21.011463] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................ 15-56-00-352| [ initrd] [ 21.011536] 00000080:0000000000000000362E302E35385C6B65726E656C372E696D67000000000000 ........6.0.58\kernel7.img...... 15-56-00-352| [ initrd] [ 21.011612] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................ 15-56-00-352| [ initrd] [ 21.011685] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................ 15-56-00-352| [ initrd] [ 21.011761] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................ 15-56-00-352| [ initrd] [ 21.011837] 00000100:00000000000000006382536335010536040AAC11B20104FFFFFF0006100AAC10 ........c.Sc5..6............. 15-56-00-352| [ initrd] [ 21.011912] 00000120:FE0A8A010B0A8A01080AAC11FE1A0205DC420E31302E3137322E31372E313738 ...............B.10.172.17.178 15-56-00-352| [ initrd] [ 21.060091] [DHCP] DHCP server address 10.172.17.178. 15-56-00-352| [ initrd] [ 21.060171] [DHCP] IP 10.172.17.151 mask 255.255.255.0. 15-56-00-352| [ initrd] [ 21.060246] [DHCP] Default gateway 10.172.17.254. 15-56-00-352| [ initrd] [ 21.060320] [DHCP] DNS 10.172.16.254. 15-56-00-352| [ initrd] [ 21.060392] [DHCP] DNS 10.138.1.11. 15-56-00-352| [ initrd] [ 21.060465] [DHCP] DNS 10.138.1.8. 15-56-00-352| [ initrd] [ 21.060536] [DHCP] DNS 10.172.17.254. 15-56-00-352| [ initrd] [ 21.060608] [DHCP] TFTP IP 10.138.1.11 already specified. 15-56-00-352| [ initrd] [ 21.060679] [DHCP] Boot file (067) 6.0.58\kernel7.img. 15-56-00-352| [ initrd] [ 21.060753] [DHCP] TFTP binary "6.0.58\", configs prefix "", using "\" slash. 15-56-00-352| [ initrd] [ 21.060827] [DHCP] MTU 1500. 15-56-00-352| WTC listener is active. 15-56-00-352| WTC broadcast listener is active. 15-56-00-352| Send broadcast WTCU discover. 15-56-00-352| [ initrd] [ 21.067914] /bootmedia/configs/openvpn.cfg -> /etc/client.conf, 5944 bytes copied. 15-56-00-352| [ WPA] [ 22.470766] eth0: CTRL-EVENT-REGDOM-CHANGE init=CORE type=WORLD 15-56-00-352| [ initrd] [ 29.192585] Run OpenVPN with user config configs/openvpn.cfg. 15-56-00-352| [ initrd] [ 29.192698] Run '/bin/sh /tmp/ntpdate', log '/tmp/ntp.out', env '', pid ''. 15-56-00-352| [ pfac] [ 29.192847] Run /bin/sh /tmp/ntpdate. 15-56-00-352| [ initrd] [ 29.192918] modprobe tun. 15-56-00-352| [ pfac] [ 29.193150] Ok, PID 788. 15-56-00-352| [ KERNEL] [ 29.204281] tun: Universal TUN/TAP device driver, 1.6 15-56-00-352| [ NTP] [ 29.205291] ntpd: 'pool.ntp.org' is 37.187.101.179 15-56-00-352| [ NTP] [ 29.205356] ntpd: sending query to 37.187.101.179 15-56-00-352| [ NTP] [ 29.221282] ntpd: reply from 37.187.101.179: offset:+2213731.950277 delay:0.016046 status:0x24 strat:3 refid:0x05b49f0c rootdelay:0.104082 reach:0x01 15-56-00-352| Connection from wtc.exe at 10.172.17.178. 15-56-00-542| [ NTP] [ 31.223479] ntpd: sending query to 37.187.101.179 15-56-00-607| [ NTP] [ 31.240885] ntpd: reply from 37.187.101.179: offset:+2213731.950335 delay:0.016473 status:0x24 strat:3 refid:0x05b49f0c rootdelay:0.104082 reach:0x03 15-56-00-607| [ NTP] [ 31.240923] ntpd: setting time to 2021-11-05 14:56:00.557523 (offset +2213731.950335s) 15-56-00-607| [NTP] close kotopipe (n = 0, errno 2). 15-56-00-607| [ pfac] [ 31.241573] Process pid 788 terminated, status 00000000. 15-56-00-660| [ initrd] [ 31.305389] Run '/sbin/ntpd -np pool.ntp.org', log '/tmp/ntp.out', env '', pid ''. 15-56-00-660| [ initrd] [ 31.305471] +--- Executing "/usr/sbin/openvpn --config /etc/client.conf --auth-user-pass /tmp/CmYz8PWfdJ9mM" 15-56-00-660| [ pfac] [ 31.305537] Run /sbin/ntpd -np pool.ntp.org. 15-56-00-660| [ pfac] [ 31.305836] Ok, PID 793.