08-25-53-439| [wtc.exe] Terminal will restart now. 08-26-39-528| WTware 5.8.40 supervisor. 08-26-39-528| [ KERNEL] [ 0.000000] Linux version 4.19.8 (aka@c20) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #3 SMP Sat Dec 8 23:42:58 UTC 2018 08-26-39-528| [ KERNEL] [ 0.000000] KERNEL supported cpus: 08-26-39-528| [ KERNEL] [ 0.000000] Intel GenuineIntel 08-26-39-528| [ KERNEL] [ 0.000000] AMD AuthenticAMD 08-26-39-528| [ KERNEL] [ 0.000000] NSC Geode by NSC 08-26-39-528| [ KERNEL] [ 0.000000] Cyrix CyrixInstead 08-26-39-528| [ KERNEL] [ 0.000000] Centaur CentaurHauls 08-26-39-528| [ KERNEL] [ 0.000000] Transmeta GenuineTMx86 08-26-39-528| [ KERNEL] [ 0.000000] Transmeta TransmetaCPU 08-26-39-528| [ KERNEL] [ 0.000000] x86/fpu: x87 FPU will use FXSAVE 08-26-39-528| [ KERNEL] [ 0.000000] BIOS-provided physical RAM map: 08-26-39-528| [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable 08-26-39-528| [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved 08-26-39-528| [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cdbffbff] usable 08-26-39-528| [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000cdbffc00-0x00000000cdc53bff] ACPI NVS 08-26-39-528| [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000cdc53c00-0x00000000cdc55bff] ACPI data 08-26-39-528| [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000cdc55c00-0x00000000cfffffff] reserved 08-26-39-528| [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved 08-26-39-528| [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fed003ff] reserved 08-26-39-528| [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed9ffff] reserved 08-26-39-528| [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved 08-26-39-528| [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved 08-26-39-528| [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000127ffffff] usable 08-26-39-528| [ KERNEL] [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! 08-26-39-528| [ KERNEL] [ 0.000000] SMBIOS 2.5 present. 08-26-39-528| [ KERNEL] [ 0.000000] DMI: Dell Inc. OptiPlex 760 /0M858N, BIOS A02 02/18/2009 08-26-39-528| [ KERNEL] [ 0.000000] tsc: Fast TSC calibration using PIT 08-26-39-528| [ KERNEL] [ 0.000000] tsc: Detected 2493.458 MHz processor 08-26-39-528| [ KERNEL] [ 0.002707] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved 08-26-39-528| [ KERNEL] [ 0.002709] e820: remove [mem 0x000a0000-0x000fffff] usable 08-26-39-528| [ KERNEL] [ 0.002716] last_pfn = 0xcdbff max_arch_pfn = 0x100000 08-26-39-528| [ KERNEL] [ 0.002722] MTRR default type: write-back 08-26-39-528| [ KERNEL] [ 0.002722] MTRR fixed ranges enabled: 08-26-39-528| [ KERNEL] [ 0.002724] 00000-9FFFF write-back 08-26-39-528| [ KERNEL] [ 0.002725] A0000-BFFFF uncachable 08-26-39-528| [ KERNEL] [ 0.002725] C0000-CFFFF write-protect 08-26-39-528| [ KERNEL] [ 0.002726] D0000-EFFFF uncachable 08-26-39-528| [ KERNEL] [ 0.002727] F0000-FFFFF write-protect 08-26-39-528| [ KERNEL] [ 0.002727] MTRR variable ranges enabled: 08-26-39-528| [ KERNEL] [ 0.002729] 0 base 0CDE00000 mask FFFE00000 uncachable 08-26-39-528| [ KERNEL] [ 0.002730] 1 base 0CE000000 mask FFE000000 uncachable 08-26-39-528| [ KERNEL] [ 0.002731] 2 base 0CDD00000 mask FFFF00000 uncachable 08-26-39-528| [ KERNEL] [ 0.002732] 3 base 0D0000000 mask FF0000000 uncachable 08-26-39-528| [ KERNEL] [ 0.002732] 4 base 0E0000000 mask FE0000000 uncachable 08-26-39-528| [ KERNEL] [ 0.002733] 5 disabled 08-26-39-528| [ KERNEL] [ 0.002733] 6 disabled 08-26-39-528| [ KERNEL] [ 0.003686] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT 08-26-39-528| [ KERNEL] [ 0.011928] found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [(ptrval)] 08-26-39-528| [ KERNEL] [ 0.011942] initial memory mapped: [mem 0x00000000-0x01bfffff] 08-26-39-528| [ KERNEL] [ 0.011945] Base memory trampoline at [(ptrval)] 9b000 size 16384 08-26-39-528| [ KERNEL] [ 0.011976] BRK [0x019d9000, 0x019d9fff] PGTABLE 08-26-39-528| [ KERNEL] [ 0.012001] ACPI: Early table checksum verification disabled 08-26-39-528| [ KERNEL] [ 0.015272] ACPI: RSDP 0x00000000000FEC00 000024 (v02 DELL ) 08-26-39-528| [ KERNEL] [ 0.015276] ACPI: XSDT 0x00000000000FC7EF 00008C (v01 DELL B10K 00000015 ASL 00000061) 08-26-39-528| [ KERNEL] [ 0.015282] ACPI: FACP 0x00000000000FC91F 0000F4 (v03 DELL B10K 00000015 ASL 00000061) 08-26-39-528| [ KERNEL] [ 0.015286] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20180810/tbfadt-569) 08-26-39-528| [ KERNEL] [ 0.015377] ACPI: DSDT 0x00000000FFF1BE4B 00536F (v01 DELL dt_ex 00001000 INTL 20050624) 08-26-39-528| [ KERNEL] [ 0.015385] ACPI: FACS 0x00000000CDBFFC00 000040 08-26-39-528| [ KERNEL] [ 0.015388] ACPI: FACS 0x00000000CDBFFC00 000040 08-26-39-528| [ KERNEL] [ 0.015477] ACPI: SSDT 0x00000000FFF212D9 0000AA (v01 DELL st_ex 00001000 INTL 20050624) 08-26-39-528| [ KERNEL] [ 0.015481] ACPI: APIC 0x00000000000FCA13 000092 (v01 DELL B10K 00000015 ASL 00000061) 08-26-39-528| [ KERNEL] [ 0.015485] ACPI: BOOT 0x00000000000FCAA5 000028 (v01 DELL B10K 00000015 ASL 00000061) 08-26-39-528| [ KERNEL] [ 0.015488] ACPI: ASF! 0x00000000000FCACD 000096 (v32 DELL B10K 00000015 ASL 00000061) 08-26-39-528| [ KERNEL] [ 0.015492] ACPI: MCFG 0x00000000000FCB63 00003E (v01 DELL B10K 00000015 ASL 00000061) 08-26-39-528| [ KERNEL] [ 0.015495] ACPI: HPET 0x00000000000FCBA1 000038 (v01 DELL B10K 00000015 ASL 00000061) 08-26-39-528| [ KERNEL] [ 0.015499] ACPI: TCPA 0x00000000000FCDFD 000032 (v01 DELL B10K 00000015 ASL 00000061) 08-26-39-528| [ KERNEL] [ 0.015502] ACPI: ____ 0x00000000000FCE2F 000030 (v01 DELL B10K 00000015 ASL 00000061) 08-26-39-528| [ KERNEL] [ 0.015506] ACPI: SLIC 0x00000000000FCBD9 000176 (v01 DELL B10K 00000015 ASL 00000061) 08-26-39-528| [ KERNEL] [ 0.015509] ACPI: SSDT 0x00000000CDBFFC40 0001F9 (v01 DpgPmm Cpu0Ist 00000011 INTL 20050624) 08-26-39-528| [ KERNEL] [ 0.015514] ACPI: SSDT 0x00000000CDC00049 0001F9 (v01 DpgPmm Cpu1Ist 00000011 INTL 20050624) 08-26-39-528| [ KERNEL] [ 0.015518] ACPI: SSDT 0x00000000CDC00452 000190 (v01 DpgPmm CpuPm 00000010 INTL 20050624) 08-26-39-528| [ KERNEL] [ 0.015749] ACPI: Local APIC address 0xfee00000 08-26-39-528| [ KERNEL] [ 0.015752] 2408MB HIGHMEM available. 08-26-39-528| [ KERNEL] [ 0.015753] 883MB LOWMEM available. 08-26-39-528| [ KERNEL] [ 0.015754] mapped low ram: 0 - 373fe000 08-26-39-528| [ KERNEL] [ 0.015754] low ram: 0 - 373fe000 08-26-39-528| [ KERNEL] [ 0.015755] BRK [0x019da000, 0x019dafff] PGTABLE 08-26-39-528| [ KERNEL] [ 0.015758] Zone ranges: 08-26-39-528| [ KERNEL] [ 0.015759] DMA [mem 0x0000000000001000-0x0000000000ffffff] 08-26-39-528| [ KERNEL] [ 0.015760] Normal [mem 0x0000000001000000-0x00000000373fdfff] 08-26-39-528| [ KERNEL] [ 0.015761] HighMem [mem 0x00000000373fe000-0x00000000cdbfefff] 08-26-39-528| [ KERNEL] [ 0.015763] Movable zone start for each node 08-26-39-528| [ KERNEL] [ 0.015763] Early memory node ranges 08-26-39-528| [ KERNEL] [ 0.015764] node 0: [mem 0x0000000000001000-0x000000000009efff] 08-26-39-528| [ KERNEL] [ 0.015765] node 0: [mem 0x0000000000100000-0x00000000cdbfefff] 08-26-39-528| [ KERNEL] [ 0.015766] Initmem setup node 0 [mem 0x0000000000001000-0x00000000cdbfefff] 08-26-39-528| [ KERNEL] [ 0.015769] On node 0 totalpages: 842653 08-26-39-528| [ KERNEL] [ 0.026777] DMA zone: 32 pages used for memmap 08-26-39-528| [ KERNEL] [ 0.026778] DMA zone: 0 pages reserved 08-26-39-528| [ KERNEL] [ 0.026779] DMA zone: 3998 pages, LIFO batch:0 08-26-39-528| [ KERNEL] [ 0.026859] Normal zone: 1736 pages used for memmap 08-26-39-528| [ KERNEL] [ 0.026860] Normal zone: 222206 pages, LIFO batch:63 08-26-39-528| [ KERNEL] [ 0.030950] HighMem zone: 616449 pages, LIFO batch:63 08-26-39-528| [ KERNEL] [ 0.042257] Using APIC driver default 08-26-39-528| [ KERNEL] [ 0.042293] Reserving Intel graphics memory at [mem 0xce000000-0xcfffffff] 08-26-39-528| [ KERNEL] [ 0.042461] ACPI: PM-Timer IO Port: 0x808 08-26-39-528| [ KERNEL] [ 0.042462] ACPI: Local APIC address 0xfee00000 08-26-39-528| [ KERNEL] [ 0.042470] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) 08-26-39-528| [ KERNEL] [ 0.042481] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 08-26-39-528| [ KERNEL] [ 0.042484] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) 08-26-39-528| [ KERNEL] [ 0.042485] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) 08-26-39-528| [ KERNEL] [ 0.042487] ACPI: IRQ0 used by override. 08-26-39-528| [ KERNEL] [ 0.042488] ACPI: IRQ9 used by override. 08-26-39-528| [ KERNEL] [ 0.042491] Using ACPI (MADT) for SMP configuration information 08-26-39-528| [ KERNEL] [ 0.042492] ACPI: HPET id: 0x8086a701 base: 0xfed00000 08-26-39-528| [ KERNEL] [ 0.042500] smpboot: 8 Processors exceeds NR_CPUS limit of 4 08-26-39-528| [ KERNEL] [ 0.042501] smpboot: Allowing 4 CPUs, 2 hotplug CPUs 08-26-39-528| [ KERNEL] [ 0.042508] [mem 0xd0000000-0xdfffffff] available for PCI devices 08-26-39-528| [ KERNEL] [ 0.042509] Booting paravirtualized kernel on bare hardware 08-26-39-528| [ KERNEL] [ 0.042514] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns 08-26-39-528| [ KERNEL] [ 0.042522] random: get_random_bytes called from 0xc15a27d0 with crng_init=0 08-26-39-528| [ KERNEL] [ 0.042528] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 08-26-39-528| [ KERNEL] [ 0.042803] percpu: Embedded 27 pages/cpu @(ptrval) s78732 r0 d31860 u110592 08-26-39-528| [ KERNEL] [ 0.042807] pcpu-alloc: s78732 r0 d31860 u110592 alloc=27*4096 08-26-39-528| [ KERNEL] [ 0.042809] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 08-26-39-528| [ KERNEL] [ 0.042827] Built 1 zonelists, mobility grouping on. Total pages: 840885 08-26-39-528| [ KERNEL] [ 0.042830] Kernel command line: wtboot=hdd5 quiet BOOT_IMAGE=packages/kernel 08-26-39-528| [ KERNEL] [ 0.043127] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) 08-26-39-528| [ KERNEL] [ 0.043240] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) 08-26-39-528| [ KERNEL] [ 0.043270] Initializing CPU#0 08-26-39-528| [ KERNEL] [ 0.043276] Initializing HighMem for node 0 (000373fe:000cdbff) 08-26-39-528| [ KERNEL] [ 0.146185] Initializing Movable for node 0 (00000000:00000000) 08-26-39-528| [ KERNEL] [ 0.151156] Memory: 3332888K/3370612K available (4654K kernel code, 201K rwdata, 860K rodata, 3976K init, 288K bss, 37724K reserved, 0K cma-reserved, 2465796K highmem) 08-26-39-528| [ KERNEL] [ 0.151160] virtual kernel memory layout: 08-26-39-528| [ KERNEL] [ 0.151160] fixmap : 0xfff65000 - 0xfffff000 ( 616 kB) 08-26-39-528| [ KERNEL] [ 0.151160] cpu_entry : 0xffc00000 - 0xffc9d000 ( 628 kB) 08-26-39-528| [ KERNEL] [ 0.151160] pkmap : 0xff400000 - 0xff800000 (4096 kB) 08-26-39-528| [ KERNEL] [ 0.151160] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) 08-26-39-528| [ KERNEL] [ 0.151160] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) 08-26-39-528| [ KERNEL] [ 0.151160] .init : 0xc15a2000 - 0xc1984000 (3976 kB) 08-26-39-528| [ KERNEL] [ 0.151160] .data : 0xc148b805 - 0xc15986c0 (1075 kB) 08-26-39-528| [ KERNEL] [ 0.151160] .text : 0xc1000000 - 0xc148b805 (4654 kB) 08-26-39-528| [ KERNEL] [ 0.151161] Checking if this processor honours the WP bit even in supervisor mode...Ok. 08-26-39-528| [ KERNEL] [ 0.151240] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 08-26-39-528| [ KERNEL] [ 0.151306] rcu: Hierarchical RCU implementation. 08-26-39-528| [ KERNEL] [ 0.151322] NR_IRQS: 2304, nr_irqs: 456, preallocated irqs: 16 08-26-39-528| [ KERNEL] [ 0.151502] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval) 08-26-39-528| [ KERNEL] [ 0.154217] Console: colour VGA+ 80x25 08-26-39-528| [ KERNEL] [ 0.154225] console [tty0] enabled 08-26-39-528| [ KERNEL] [ 0.154231] ACPI: Core revision 20180810 08-26-39-528| [ KERNEL] [ 0.244988] ACPI BIOS Warning (bug): Incorrect checksum in table [TCPA] - 0x00, should be 0x7F (20180810/tbprint-177) 08-26-39-528| [ KERNEL] [ 0.245125] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns 08-26-39-528| [ KERNEL] [ 0.245137] hpet clockevent registered 08-26-39-528| [ KERNEL] [ 0.245143] APIC: Switch to symmetric I/O mode setup 08-26-39-528| [ KERNEL] [ 0.245144] Enabling APIC mode: Flat. Using 1 I/O APICs 08-26-39-528| [ KERNEL] [ 0.245523] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 08-26-39-528| [ KERNEL] [ 0.265143] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23f1159c9b0, max_idle_ns: 440795247220 ns 08-26-39-528| [ KERNEL] [ 0.265157] Calibrating delay loop (skipped), value calculated using timer frequency.. 4986.91 BogoMIPS (lpj=9973832) 08-26-39-528| [ KERNEL] [ 0.265160] pid_max: default: 32768 minimum: 301 08-26-39-528| [ KERNEL] [ 0.265193] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) 08-26-39-528| [ KERNEL] [ 0.265199] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) 08-26-39-528| [ KERNEL] [ 0.265394] mce: CPU supports 6 MCE banks 08-26-39-528| [ KERNEL] [ 0.265400] CPU0: Thermal monitoring enabled (TM2) 08-26-39-528| [ KERNEL] [ 0.265403] process: using mwait in idle threads 08-26-39-528| [ KERNEL] [ 0.265411] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 08-26-39-528| [ KERNEL] [ 0.265412] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 08-26-39-528| [ KERNEL] [ 0.265415] Spectre V2 : Spectre mitigation: kernel not compiled with retpoline; no mitigation available! 08-26-39-528| [ KERNEL] [ 0.265416] Speculative Store Bypass: Vulnerable 08-26-39-528| [ KERNEL] [ 0.265416] L1TF: Kernel not compiled for PAE. No mitigation for L1TF 08-26-39-528| [ KERNEL] [ 0.265565] Freeing SMP alternatives memory: 20K 08-26-39-528| [ KERNEL] [ 0.269145] smpboot: CPU0: Intel Pentium(R) Dual-Core CPU E5200 @ 2.50GHz (family: 0x6, model: 0x17, stepping: 0x6) 08-26-39-528| [ KERNEL] [ 0.269145] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. 08-26-39-528| [ KERNEL] [ 0.269145] ... version: 2 08-26-39-528| [ KERNEL] [ 0.269145] ... bit width: 40 08-26-39-528| [ KERNEL] [ 0.269145] ... generic registers: 2 08-26-39-528| [ KERNEL] [ 0.269145] ... value mask: 000000ffffffffff 08-26-39-528| [ KERNEL] [ 0.269145] ... max period: 000000007fffffff 08-26-39-528| [ KERNEL] [ 0.269145] ... fixed-purpose events: 3 08-26-39-528| [ KERNEL] [ 0.269145] ... event mask: 0000000700000003 08-26-39-528| [ KERNEL] [ 0.269145] rcu: Hierarchical SRCU implementation. 08-26-39-528| [ KERNEL] [ 0.269145] smp: Bringing up secondary CPUs ... 08-26-39-528| [ KERNEL] [ 0.269145] CPU 1 irqstacks, hard=(ptrval) soft=(ptrval) 08-26-39-528| [ KERNEL] [ 0.269145] x86: Booting SMP configuration: 08-26-39-528| [ KERNEL] [ 0.269145] .... node #0, CPUs: #1 08-26-39-528| [ KERNEL] [ 0.097623] Initializing CPU#1 08-26-39-528| [ KERNEL] [ 0.269145] smp: Brought up 1 node, 2 CPUs 08-26-39-528| [ KERNEL] [ 0.269145] smpboot: Max logical packages: 2 08-26-39-528| [ KERNEL] [ 0.269145] smpboot: Total of 2 processors activated (9973.83 BogoMIPS) 08-26-39-528| [ KERNEL] [ 0.269145] devtmpfs: initialized 08-26-39-528| [ KERNEL] [ 0.269145] PM: Registering ACPI NVS region [mem 0xcdbffc00-0xcdc53bff] (344064 bytes) 08-26-39-528| [ KERNEL] [ 0.269145] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns 08-26-39-528| [ KERNEL] [ 0.269145] futex hash table entries: 1024 (order: 4, 65536 bytes) 08-26-39-528| [ KERNEL] [ 0.269145] NET: Registered protocol family 16 08-26-39-528| [ KERNEL] [ 0.269145] cpuidle: using governor ladder 08-26-39-528| [ KERNEL] [ 0.269145] cpuidle: using governor menu 08-26-39-528| [ KERNEL] [ 0.269145] Simple Boot Flag at 0x7a set to 0x1 08-26-39-528| [ KERNEL] [ 0.269145] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it 08-26-39-528| [ KERNEL] [ 0.269145] ACPI: bus type PCI registered 08-26-39-528| [ KERNEL] [ 0.269145] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) 08-26-39-528| [ KERNEL] [ 0.269145] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 08-26-39-528| [ KERNEL] [ 0.269145] PCI: Using MMCONFIG for extended config space 08-26-39-528| [ KERNEL] [ 0.269145] PCI: Using configuration type 1 for base access 08-26-39-528| [ KERNEL] [ 0.271234] ACPI: Added _OSI(Module Device) 08-26-39-528| [ KERNEL] [ 0.271234] ACPI: Added _OSI(Processor Device) 08-26-39-528| [ KERNEL] [ 0.271234] ACPI: Added _OSI(3.0 _SCP Extensions) 08-26-39-528| [ KERNEL] [ 0.271234] ACPI: Added _OSI(Processor Aggregator Device) 08-26-39-528| [ KERNEL] [ 0.271234] ACPI: Added _OSI(Linux-Dell-Video) 08-26-39-528| [ KERNEL] [ 0.271234] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) 08-26-39-528| [ KERNEL] [ 0.338947] ACPI: 5 ACPI AML tables successfully acquired and loaded 08-26-39-528| [ KERNEL] [ 0.346364] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored 08-26-39-528| [ KERNEL] [ 0.371839] ACPI: Interpreter enabled 08-26-39-528| [ KERNEL] [ 0.371862] ACPI: (supports S0 S1 S3 S5) 08-26-39-528| [ KERNEL] [ 0.371863] ACPI: Using IOAPIC for interrupt routing 08-26-39-528| [ KERNEL] [ 0.371990] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug 08-26-39-528| [ KERNEL] [ 0.373529] ACPI: Enabled 14 GPEs in block 00 to 3F 08-26-39-528| [ KERNEL] [ 0.509478] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) 08-26-39-528| [ KERNEL] [ 0.509484] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] 08-26-39-528| [ KERNEL] [ 0.509489] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM 08-26-39-528| [ KERNEL] [ 0.517518] PCI host bridge to bus 0000:00 08-26-39-528| [ KERNEL] [ 0.517521] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] 08-26-39-528| [ KERNEL] [ 0.517522] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] 08-26-39-528| [ KERNEL] [ 0.517524] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] 08-26-39-528| [ KERNEL] [ 0.517525] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000effff window] 08-26-39-528| [ KERNEL] [ 0.517527] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] 08-26-39-528| [ KERNEL] [ 0.517528] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfec00000 window] 08-26-39-528| [ KERNEL] [ 0.517529] pci_bus 0000:00: root bus resource [mem 0xcdd00000-0xdfffffff window] 08-26-39-528| [ KERNEL] [ 0.517531] pci_bus 0000:00: root bus resource [mem 0xff980000-0xff980fff window] 08-26-39-528| [ KERNEL] [ 0.517532] pci_bus 0000:00: root bus resource [mem 0xff97c000-0xff97ffff window] 08-26-39-528| [ KERNEL] [ 0.517533] pci_bus 0000:00: root bus resource [mem 0xfed20000-0xfed9ffff window] 08-26-39-528| [ KERNEL] [ 0.517535] pci_bus 0000:00: root bus resource [mem 0xfeda7000-0xfeda7fff window] 08-26-39-528| [ KERNEL] [ 0.517537] pci_bus 0000:00: root bus resource [bus 00-ff] 08-26-39-528| [ KERNEL] [ 0.517546] pci 0000:00:00.0: [8086:2e10] type 00 class 0x060000 08-26-39-528| [ KERNEL] [ 0.517957] pci 0000:00:01.0: [8086:2e11] type 01 class 0x060400 08-26-39-528| [ KERNEL] [ 0.517998] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold 08-26-39-528| [ KERNEL] [ 0.518384] pci 0000:00:02.0: [8086:2e12] type 00 class 0x030000 08-26-39-528| [ KERNEL] [ 0.518396] pci 0000:00:02.0: reg 0x10: [mem 0xfe800000-0xfebfffff 64bit] 08-26-39-528| [ KERNEL] [ 0.518403] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] 08-26-39-528| [ KERNEL] [ 0.518407] pci 0000:00:02.0: reg 0x20: [io 0xec90-0xec97] 08-26-39-528| [ KERNEL] [ 0.518798] pci 0000:00:02.1: [8086:2e13] type 00 class 0x038000 08-26-39-528| [ KERNEL] [ 0.518808] pci 0000:00:02.1: reg 0x10: [mem 0xfe700000-0xfe7fffff 64bit] 08-26-39-528| [ KERNEL] [ 0.519206] pci 0000:00:03.0: [8086:2e14] type 00 class 0x078000 08-26-39-528| [ KERNEL] [ 0.519221] pci 0000:00:03.0: reg 0x10: [mem 0xfeda6000-0xfeda600f 64bit] 08-26-39-528| [ KERNEL] [ 0.519262] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold 08-26-39-528| [ KERNEL] [ 0.519642] pci 0000:00:03.2: [8086:2e16] type 00 class 0x010185 08-26-39-528| [ KERNEL] [ 0.519666] pci 0000:00:03.2: reg 0x10: [io 0xfe80-0xfe87] 08-26-39-528| [ KERNEL] [ 0.519675] pci 0000:00:03.2: reg 0x14: [io 0xfe90-0xfe93] 08-26-39-528| [ KERNEL] [ 0.519685] pci 0000:00:03.2: reg 0x18: [io 0xfea0-0xfea7] 08-26-39-528| [ KERNEL] [ 0.519694] pci 0000:00:03.2: reg 0x1c: [io 0xfeb0-0xfeb3] 08-26-39-528| [ KERNEL] [ 0.519704] pci 0000:00:03.2: reg 0x20: [io 0xfef0-0xfeff] 08-26-39-528| [ KERNEL] [ 0.520142] pci 0000:00:03.3: [8086:2e17] type 00 class 0x070002 08-26-39-528| [ KERNEL] [ 0.520165] pci 0000:00:03.3: reg 0x10: [io 0xec98-0xec9f] 08-26-39-528| [ KERNEL] [ 0.520175] pci 0000:00:03.3: reg 0x14: [mem 0xfe6d8000-0xfe6d8fff] 08-26-39-528| [ KERNEL] [ 0.520623] pci 0000:00:19.0: [8086:10de] type 00 class 0x020000 08-26-39-528| [ KERNEL] [ 0.520641] pci 0000:00:19.0: reg 0x10: [mem 0xfe6e0000-0xfe6fffff] 08-26-39-528| [ KERNEL] [ 0.520648] pci 0000:00:19.0: reg 0x14: [mem 0xfe6d9000-0xfe6d9fff] 08-26-39-528| [ KERNEL] [ 0.520655] pci 0000:00:19.0: reg 0x18: [io 0xecc0-0xecdf] 08-26-39-528| [ KERNEL] [ 0.520711] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold 08-26-39-528| [ KERNEL] [ 0.521167] pci 0000:00:1a.0: [8086:3a67] type 00 class 0x0c0300 08-26-39-528| [ KERNEL] [ 0.521209] pci 0000:00:1a.0: reg 0x20: [io 0xff20-0xff3f] 08-26-39-528| [ KERNEL] [ 0.521621] pci 0000:00:1a.1: [8086:3a68] type 00 class 0x0c0300 08-26-39-528| [ KERNEL] [ 0.521663] pci 0000:00:1a.1: reg 0x20: [io 0xff00-0xff1f] 08-26-39-528| [ KERNEL] [ 0.522077] pci 0000:00:1a.2: [8086:3a69] type 00 class 0x0c0300 08-26-39-528| [ KERNEL] [ 0.522119] pci 0000:00:1a.2: reg 0x20: [io 0xfc00-0xfc1f] 08-26-39-528| [ KERNEL] [ 0.522539] pci 0000:00:1a.7: [8086:3a6c] type 00 class 0x0c0320 08-26-39-528| [ KERNEL] [ 0.522560] pci 0000:00:1a.7: reg 0x10: [mem 0xfe6da000-0xfe6da3ff] 08-26-39-528| [ KERNEL] [ 0.522638] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold 08-26-39-528| [ KERNEL] [ 0.523024] pci 0000:00:1b.0: [8086:3a6e] type 00 class 0x040300 08-26-39-528| [ KERNEL] [ 0.523044] pci 0000:00:1b.0: reg 0x10: [mem 0xfe6dc000-0xfe6dffff 64bit] 08-26-39-528| [ KERNEL] [ 0.523111] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold 08-26-39-528| [ KERNEL] [ 0.523493] pci 0000:00:1c.0: [8086:3a70] type 01 class 0x060400 08-26-39-528| [ KERNEL] [ 0.523564] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold 08-26-39-528| [ KERNEL] [ 0.523957] pci 0000:00:1c.1: [8086:3a72] type 01 class 0x060400 08-26-39-528| [ KERNEL] [ 0.524028] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold 08-26-39-528| [ KERNEL] [ 0.524425] pci 0000:00:1d.0: [8086:3a64] type 00 class 0x0c0300 08-26-39-528| [ KERNEL] [ 0.524466] pci 0000:00:1d.0: reg 0x20: [io 0xff80-0xff9f] 08-26-39-528| [ KERNEL] [ 0.524878] pci 0000:00:1d.1: [8086:3a65] type 00 class 0x0c0300 08-26-39-528| [ KERNEL] [ 0.524920] pci 0000:00:1d.1: reg 0x20: [io 0xff60-0xff7f] 08-26-39-528| [ KERNEL] [ 0.525340] pci 0000:00:1d.2: [8086:3a66] type 00 class 0x0c0300 08-26-39-528| [ KERNEL] [ 0.525382] pci 0000:00:1d.2: reg 0x20: [io 0xff40-0xff5f] 08-26-39-528| [ KERNEL] [ 0.525806] pci 0000:00:1d.7: [8086:3a6a] type 00 class 0x0c0320 08-26-39-528| [ KERNEL] [ 0.525827] pci 0000:00:1d.7: reg 0x10: [mem 0xff980000-0xff9803ff] 08-26-39-528| [ KERNEL] [ 0.525905] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold 08-26-39-528| [ KERNEL] [ 0.526287] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 08-26-39-528| [ KERNEL] [ 0.526714] pci 0000:00:1f.0: [8086:3a1a] type 00 class 0x060100 08-26-39-528| [ KERNEL] [ 0.527185] pci 0000:00:1f.2: [8086:3a00] type 00 class 0x01018a 08-26-39-528| [ KERNEL] [ 0.527201] pci 0000:00:1f.2: reg 0x10: [io 0x01f0-0x01f7] 08-26-39-528| [ KERNEL] [ 0.527208] pci 0000:00:1f.2: reg 0x14: [io 0x03f4-0x03f7] 08-26-39-528| [ KERNEL] [ 0.527214] pci 0000:00:1f.2: reg 0x18: [io 0x0170-0x0177] 08-26-39-528| [ KERNEL] [ 0.527221] pci 0000:00:1f.2: reg 0x1c: [io 0x0374-0x0377] 08-26-39-528| [ KERNEL] [ 0.527228] pci 0000:00:1f.2: reg 0x20: [io 0xfec0-0xfecf] 08-26-39-528| [ KERNEL] [ 0.527234] pci 0000:00:1f.2: reg 0x24: [io 0xeca0-0xecaf] 08-26-39-528| [ KERNEL] [ 0.527244] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] 08-26-39-528| [ KERNEL] [ 0.527245] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6] 08-26-39-528| [ KERNEL] [ 0.527246] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] 08-26-39-528| [ KERNEL] [ 0.527247] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376] 08-26-39-528| [ KERNEL] [ 0.527643] pci 0000:00:1f.3: [8086:3a60] type 00 class 0x0c0500 08-26-39-528| [ KERNEL] [ 0.527660] pci 0000:00:1f.3: reg 0x10: [mem 0xfe6db000-0xfe6db0ff 64bit] 08-26-39-528| [ KERNEL] [ 0.527679] pci 0000:00:1f.3: reg 0x20: [io 0xece0-0xecff] 08-26-39-528| [ KERNEL] [ 0.528069] pci 0000:00:1f.5: [8086:3a06] type 00 class 0x010185 08-26-39-528| [ KERNEL] [ 0.528085] pci 0000:00:1f.5: reg 0x10: [io 0xfe40-0xfe47] 08-26-39-528| [ KERNEL] [ 0.528092] pci 0000:00:1f.5: reg 0x14: [io 0xfe50-0xfe53] 08-26-39-528| [ KERNEL] [ 0.528098] pci 0000:00:1f.5: reg 0x18: [io 0xfe60-0xfe67] 08-26-39-528| [ KERNEL] [ 0.528105] pci 0000:00:1f.5: reg 0x1c: [io 0xfe70-0xfe73] 08-26-39-528| [ KERNEL] [ 0.528112] pci 0000:00:1f.5: reg 0x20: [io 0xfed0-0xfedf] 08-26-39-528| [ KERNEL] [ 0.528118] pci 0000:00:1f.5: reg 0x24: [io 0xecb0-0xecbf] 08-26-39-528| [ KERNEL] [ 0.528541] pci 0000:00:01.0: PCI bridge to [bus 01] 08-26-39-528| [ KERNEL] [ 0.528545] pci 0000:00:01.0: bridge window [mem 0xfe500000-0xfe5fffff] 08-26-39-528| [ KERNEL] [ 0.528583] pci 0000:00:1c.0: PCI bridge to [bus 02] 08-26-39-528| [ KERNEL] [ 0.528588] pci 0000:00:1c.0: bridge window [mem 0xfe400000-0xfe4fffff] 08-26-39-528| [ KERNEL] [ 0.528628] pci 0000:00:1c.1: PCI bridge to [bus 03] 08-26-39-528| [ KERNEL] [ 0.528632] pci 0000:00:1c.1: bridge window [mem 0xfe300000-0xfe3fffff] 08-26-39-528| [ KERNEL] [ 0.528651] pci_bus 0000:04: extended config space not accessible 08-26-39-528| [ KERNEL] [ 0.528702] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode) 08-26-39-528| [ KERNEL] [ 0.528710] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) 08-26-39-528| [ KERNEL] [ 0.528711] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) 08-26-39-528| [ KERNEL] [ 0.528713] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) 08-26-39-528| [ KERNEL] [ 0.528714] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000effff window] (subtractive decode) 08-26-39-528| [ KERNEL] [ 0.528715] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode) 08-26-39-528| [ KERNEL] [ 0.528717] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfec00000 window] (subtractive decode) 08-26-39-528| [ KERNEL] [ 0.528718] pci 0000:00:1e.0: bridge window [mem 0xcdd00000-0xdfffffff window] (subtractive decode) 08-26-39-528| [ KERNEL] [ 0.528720] pci 0000:00:1e.0: bridge window [mem 0xff980000-0xff980fff window] (subtractive decode) 08-26-39-528| [ KERNEL] [ 0.528721] pci 0000:00:1e.0: bridge window [mem 0xff97c000-0xff97ffff window] (subtractive decode) 08-26-39-528| [ KERNEL] [ 0.528723] pci 0000:00:1e.0: bridge window [mem 0xfed20000-0xfed9ffff window] (subtractive decode) 08-26-39-528| [ KERNEL] [ 0.528724] pci 0000:00:1e.0: bridge window [mem 0xfeda7000-0xfeda7fff window] (subtractive decode) 08-26-39-528| [ KERNEL] [ 0.528741] pci_bus 0000:00: on NUMA node 0 08-26-39-528| [ KERNEL] [ 0.554905] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) 08-26-39-528| [ KERNEL] [ 0.555822] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15) 08-26-39-528| [ KERNEL] [ 0.556724] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15) 08-26-39-528| [ KERNEL] [ 0.557634] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15) 08-26-39-528| [ KERNEL] [ 0.558564] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. 08-26-39-528| [ KERNEL] [ 0.559467] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15) 08-26-39-528| [ KERNEL] [ 0.560387] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15) 08-26-39-528| [ KERNEL] [ 0.561292] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15) 08-26-39-528| [ KERNEL] [ 0.561831] ACPI: bus type USB registered 08-26-39-528| [ KERNEL] [ 0.561858] usbcore: registered new interface driver usbfs 08-26-39-528| [ KERNEL] [ 0.561869] usbcore: registered new interface driver hub 08-26-39-528| [ KERNEL] [ 0.561888] usbcore: registered new device driver usb 08-26-39-528| [ KERNEL] [ 0.561916] pps_core: LinuxPPS API ver. 1 registered 08-26-39-528| [ KERNEL] [ 0.561917] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 08-26-39-528| [ KERNEL] [ 0.561923] PTP clock support registered 08-26-39-528| [ KERNEL] [ 0.561956] PCI: Using ACPI for IRQ routing 08-26-39-528| [ KERNEL] [ 0.567802] PCI: pci_cache_line_size set to 64 bytes 08-26-39-528| [ KERNEL] [ 0.567812] pci 0000:00:03.0: can't claim BAR 0 [mem 0xfeda6000-0xfeda600f 64bit]: no compatible bridge window 08-26-39-528| [ KERNEL] [ 0.567858] Expanded resource Reserved due to conflict with PCI Bus 0000:00 08-26-39-528| [ KERNEL] [ 0.567859] Expanded resource Reserved due to conflict with PCI Bus 0000:00 08-26-39-528| [ KERNEL] [ 0.567861] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] 08-26-39-528| [ KERNEL] [ 0.567862] e820: reserve RAM buffer [mem 0xcdbffc00-0xcfffffff] 08-26-39-528| [ KERNEL] [ 0.568008] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found 08-26-39-528| [ KERNEL] [ 0.568008] HPET: 8 timers in total, 4 timers will be used for per-cpu timer 08-26-39-528| [ KERNEL] [ 0.568008] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 0, 0 08-26-39-528| [ KERNEL] [ 0.568008] hpet0: 8 comparators, 64-bit 14.318180 MHz counter 08-26-39-528| [ KERNEL] [ 0.570170] hpet: hpet2 irq 24 for MSI 08-26-39-528| [ KERNEL] [ 0.570180] hpet: hpet3 irq 25 for MSI 08-26-39-528| [ KERNEL] [ 0.570181] clocksource: Switched to clocksource tsc-early 08-26-39-528| [ KERNEL] [ 0.570181] pnp: PnP ACPI init 08-26-39-528| [ KERNEL] [ 0.573121] system 00:00: [io 0x0800-0x085f] has been reserved 08-26-39-528| [ KERNEL] [ 0.573123] system 00:00: [io 0x0c00-0x0c7f] has been reserved 08-26-39-528| [ KERNEL] [ 0.573124] system 00:00: [io 0x0860-0x08ff] has been reserved 08-26-39-528| [ KERNEL] [ 0.573131] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) 08-26-39-528| [ KERNEL] [ 0.573367] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) 08-26-39-528| [ KERNEL] [ 0.587716] pnp 00:02: [dma 0 disabled] 08-26-39-528| [ KERNEL] [ 0.588913] pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (active) 08-26-39-528| [ KERNEL] [ 0.594321] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) 08-26-39-528| [ KERNEL] [ 0.608767] pnp: PnP ACPI: found 4 devices 08-26-39-528| [ KERNEL] [ 0.644963] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns 08-26-39-528| [ KERNEL] [ 0.644986] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 08-26-39-528| [ KERNEL] [ 0.644989] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 08-26-39-528| [ KERNEL] [ 0.644996] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 08-26-39-528| [ KERNEL] [ 0.644998] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 08-26-39-528| [ KERNEL] [ 0.645014] pci 0000:00:1c.0: BAR 9: assigned [mem 0xf0000000-0xf01fffff 64bit pref] 08-26-39-528| [ KERNEL] [ 0.645017] pci 0000:00:1c.1: BAR 9: assigned [mem 0xf0200000-0xf03fffff 64bit pref] 08-26-39-528| [ KERNEL] [ 0.645019] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff] 08-26-39-528| [ KERNEL] [ 0.645021] pci 0000:00:1c.1: BAR 7: assigned [io 0x2000-0x2fff] 08-26-39-528| [ KERNEL] [ 0.645023] pci 0000:00:03.0: BAR 0: assigned [mem 0xf0400000-0xf040000f 64bit] 08-26-39-528| [ KERNEL] [ 0.645035] pci 0000:00:01.0: PCI bridge to [bus 01] 08-26-39-528| [ KERNEL] [ 0.645038] pci 0000:00:01.0: bridge window [mem 0xfe500000-0xfe5fffff] 08-26-39-528| [ KERNEL] [ 0.645043] pci 0000:00:1c.0: PCI bridge to [bus 02] 08-26-39-528| [ KERNEL] [ 0.645045] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] 08-26-39-528| [ KERNEL] [ 0.645049] pci 0000:00:1c.0: bridge window [mem 0xfe400000-0xfe4fffff] 08-26-39-528| [ KERNEL] [ 0.645052] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] 08-26-39-528| [ KERNEL] [ 0.645056] pci 0000:00:1c.1: PCI bridge to [bus 03] 08-26-39-528| [ KERNEL] [ 0.645058] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] 08-26-39-528| [ KERNEL] [ 0.645062] pci 0000:00:1c.1: bridge window [mem 0xfe300000-0xfe3fffff] 08-26-39-528| [ KERNEL] [ 0.645065] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf03fffff 64bit pref] 08-26-39-528| [ KERNEL] [ 0.645070] pci 0000:00:1e.0: PCI bridge to [bus 04] 08-26-39-528| [ KERNEL] [ 0.645079] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] 08-26-39-528| [ KERNEL] [ 0.645081] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] 08-26-39-528| [ KERNEL] [ 0.645082] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] 08-26-39-528| [ KERNEL] [ 0.645083] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000effff window] 08-26-39-528| [ KERNEL] [ 0.645085] pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff window] 08-26-39-528| [ KERNEL] [ 0.645086] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfec00000 window] 08-26-39-528| [ KERNEL] [ 0.645087] pci_bus 0000:00: resource 10 [mem 0xcdd00000-0xdfffffff window] 08-26-39-528| [ KERNEL] [ 0.645089] pci_bus 0000:00: resource 11 [mem 0xff980000-0xff980fff window] 08-26-39-528| [ KERNEL] [ 0.645090] pci_bus 0000:00: resource 12 [mem 0xff97c000-0xff97ffff window] 08-26-39-528| [ KERNEL] [ 0.645091] pci_bus 0000:00: resource 13 [mem 0xfed20000-0xfed9ffff window] 08-26-39-528| [ KERNEL] [ 0.645093] pci_bus 0000:00: resource 14 [mem 0xfeda7000-0xfeda7fff window] 08-26-39-528| [ KERNEL] [ 0.645094] pci_bus 0000:01: resource 1 [mem 0xfe500000-0xfe5fffff] 08-26-39-528| [ KERNEL] [ 0.645096] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] 08-26-39-528| [ KERNEL] [ 0.645097] pci_bus 0000:02: resource 1 [mem 0xfe400000-0xfe4fffff] 08-26-39-528| [ KERNEL] [ 0.645098] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref] 08-26-39-528| [ KERNEL] [ 0.645099] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] 08-26-39-528| [ KERNEL] [ 0.645101] pci_bus 0000:03: resource 1 [mem 0xfe300000-0xfe3fffff] 08-26-39-528| [ KERNEL] [ 0.645102] pci_bus 0000:03: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref] 08-26-39-528| [ KERNEL] [ 0.645103] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window] 08-26-39-528| [ KERNEL] [ 0.645105] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window] 08-26-39-528| [ KERNEL] [ 0.645106] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window] 08-26-39-528| [ KERNEL] [ 0.645107] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000effff window] 08-26-39-528| [ KERNEL] [ 0.645109] pci_bus 0000:04: resource 8 [mem 0x000f0000-0x000fffff window] 08-26-39-528| [ KERNEL] [ 0.645110] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfec00000 window] 08-26-39-528| [ KERNEL] [ 0.645111] pci_bus 0000:04: resource 10 [mem 0xcdd00000-0xdfffffff window] 08-26-39-528| [ KERNEL] [ 0.645113] pci_bus 0000:04: resource 11 [mem 0xff980000-0xff980fff window] 08-26-39-528| [ KERNEL] [ 0.645114] pci_bus 0000:04: resource 12 [mem 0xff97c000-0xff97ffff window] 08-26-39-528| [ KERNEL] [ 0.645115] pci_bus 0000:04: resource 13 [mem 0xfed20000-0xfed9ffff window] 08-26-39-528| [ KERNEL] [ 0.645117] pci_bus 0000:04: resource 14 [mem 0xfeda7000-0xfeda7fff window] 08-26-39-528| [ KERNEL] [ 0.645185] NET: Registered protocol family 2 08-26-39-528| [ KERNEL] [ 0.645325] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) 08-26-39-528| [ KERNEL] [ 0.645329] TCP established hash table entries: 8192 (order: 3, 32768 bytes) 08-26-39-528| [ KERNEL] [ 0.645345] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) 08-26-39-528| [ KERNEL] [ 0.645374] TCP: Hash tables configured (established 8192 bind 8192) 08-26-39-528| [ KERNEL] [ 0.645412] UDP hash table entries: 512 (order: 2, 16384 bytes) 08-26-39-528| [ KERNEL] [ 0.645421] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) 08-26-39-528| [ KERNEL] [ 0.645456] NET: Registered protocol family 1 08-26-39-528| [ KERNEL] [ 0.645579] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] 08-26-39-528| [ KERNEL] [ 0.651754] PCI: CLS 64 bytes, default 64 08-26-39-528| [ KERNEL] [ 1.081155] random: fast init done 08-26-39-528| [ KERNEL] [ 1.083928] Initialise system trusted keyrings 08-26-39-528| [ KERNEL] [ 1.083981] workingset: timestamp_bits=30 max_order=20 bucket_order=0 08-26-39-528| [ KERNEL] [ 1.086306] pstore: using deflate compression 08-26-39-528| [ KERNEL] [ 1.096706] Key type asymmetric registered 08-26-39-528| [ KERNEL] [ 1.096709] Asymmetric key parser 'x509' registered 08-26-39-528| [ KERNEL] [ 1.096722] bounce: pool size: 64 pages 08-26-39-528| [ KERNEL] [ 1.096746] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) 08-26-39-528| [ KERNEL] [ 1.096748] io scheduler noop registered 08-26-39-528| [ KERNEL] [ 1.096749] io scheduler deadline registered (default) 08-26-39-528| [ KERNEL] [ 1.098256] intel_idle: does not run on family 6 model 23 08-26-39-528| [ KERNEL] [ 1.098308] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 08-26-39-528| [ KERNEL] [ 1.098436] ACPI: Power Button [VBTN] 08-26-39-528| [ KERNEL] [ 1.098496] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 08-26-39-528| [ KERNEL] [ 1.098529] ACPI: Power Button [PWRF] 08-26-39-528| [ KERNEL] [ 1.100727] Monitor-Mwait will be used to enter C-1 state 08-26-39-528| [ KERNEL] [ 1.104249] zram: Added device: zram0 08-26-39-528| [ KERNEL] [ 1.104254] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 08-26-39-528| [ KERNEL] [ 1.104255] ehci-pci: EHCI PCI platform driver 08-26-39-528| [ KERNEL] [ 1.104703] ehci-pci 0000:00:1a.7: EHCI Host Controller 08-26-39-528| [ KERNEL] [ 1.104710] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 08-26-39-528| [ KERNEL] [ 1.104722] ehci-pci 0000:00:1a.7: debug port 1 08-26-39-528| [ KERNEL] [ 1.108633] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported 08-26-39-528| [ KERNEL] [ 1.109240] ehci-pci 0000:00:1a.7: irq 22, io mem 0xfe6da000 08-26-39-528| [ KERNEL] [ 1.125565] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 08-26-39-528| [ KERNEL] [ 1.125611] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 08-26-39-528| [ KERNEL] [ 1.125613] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 08-26-39-528| [ KERNEL] [ 1.125614] usb usb1: Product: EHCI Host Controller 08-26-39-528| [ KERNEL] [ 1.125616] usb usb1: Manufacturer: Linux 4.19.8 ehci_hcd 08-26-39-528| [ KERNEL] [ 1.125617] usb usb1: SerialNumber: 0000:00:1a.7 08-26-39-528| [ KERNEL] [ 1.125785] hub 1-0:1.0: USB hub found 08-26-39-528| [ KERNEL] [ 1.125792] hub 1-0:1.0: 6 ports detected 08-26-39-528| [ KERNEL] [ 1.126439] ehci-pci 0000:00:1d.7: EHCI Host Controller 08-26-39-528| [ KERNEL] [ 1.126445] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 08-26-39-528| [ KERNEL] [ 1.126456] ehci-pci 0000:00:1d.7: debug port 1 08-26-39-528| [ KERNEL] [ 1.130366] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported 08-26-39-528| [ KERNEL] [ 1.130381] ehci-pci 0000:00:1d.7: irq 23, io mem 0xff980000 08-26-39-528| [ KERNEL] [ 1.145162] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 08-26-39-528| [ KERNEL] [ 1.145231] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 08-26-39-528| [ KERNEL] [ 1.145234] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 08-26-39-528| [ KERNEL] [ 1.145237] usb usb2: Product: EHCI Host Controller 08-26-39-528| [ KERNEL] [ 1.145239] usb usb2: Manufacturer: Linux 4.19.8 ehci_hcd 08-26-39-528| [ KERNEL] [ 1.145242] usb usb2: SerialNumber: 0000:00:1d.7 08-26-39-528| [ KERNEL] [ 1.145377] hub 2-0:1.0: USB hub found 08-26-39-528| [ KERNEL] [ 1.145383] hub 2-0:1.0: 6 ports detected 08-26-39-528| [ KERNEL] [ 1.145568] ehci-platform: EHCI generic platform driver 08-26-39-528| [ KERNEL] [ 1.145595] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 08-26-39-528| [ KERNEL] [ 1.145596] ohci-pci: OHCI PCI platform driver 08-26-39-528| [ KERNEL] [ 1.145621] ohci-platform: OHCI generic platform driver 08-26-39-528| [ KERNEL] [ 1.145641] uhci_hcd: USB Universal Host Controller Interface driver 08-26-39-528| [ KERNEL] [ 1.146056] uhci_hcd 0000:00:1a.0: UHCI Host Controller 08-26-39-528| [ KERNEL] [ 1.146061] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 08-26-39-528| [ KERNEL] [ 1.146092] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20 08-26-39-528| [ KERNEL] [ 1.146511] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 08-26-39-528| [ KERNEL] [ 1.146513] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 08-26-39-528| [ KERNEL] [ 1.146514] usb usb3: Product: UHCI Host Controller 08-26-39-528| [ KERNEL] [ 1.146515] usb usb3: Manufacturer: Linux 4.19.8 uhci_hcd 08-26-39-528| [ KERNEL] [ 1.146517] usb usb3: SerialNumber: 0000:00:1a.0 08-26-39-528| [ KERNEL] [ 1.146629] hub 3-0:1.0: USB hub found 08-26-39-528| [ KERNEL] [ 1.146635] hub 3-0:1.0: 2 ports detected 08-26-39-528| [ KERNEL] [ 1.147151] uhci_hcd 0000:00:1a.1: UHCI Host Controller 08-26-39-528| [ KERNEL] [ 1.147157] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 08-26-39-528| [ KERNEL] [ 1.147185] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00 08-26-39-528| [ KERNEL] [ 1.147226] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 08-26-39-528| [ KERNEL] [ 1.147227] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 08-26-39-528| [ KERNEL] [ 1.147229] usb usb4: Product: UHCI Host Controller 08-26-39-528| [ KERNEL] [ 1.147230] usb usb4: Manufacturer: Linux 4.19.8 uhci_hcd 08-26-39-528| [ KERNEL] [ 1.147231] usb usb4: SerialNumber: 0000:00:1a.1 08-26-39-528| [ KERNEL] [ 1.147341] hub 4-0:1.0: USB hub found 08-26-39-528| [ KERNEL] [ 1.147346] hub 4-0:1.0: 2 ports detected 08-26-39-528| [ KERNEL] [ 1.147866] uhci_hcd 0000:00:1a.2: UHCI Host Controller 08-26-39-528| [ KERNEL] [ 1.147871] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 08-26-39-528| [ KERNEL] [ 1.147893] uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000fc00 08-26-39-528| [ KERNEL] [ 1.147934] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 08-26-39-528| [ KERNEL] [ 1.147935] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 08-26-39-528| [ KERNEL] [ 1.147936] usb usb5: Product: UHCI Host Controller 08-26-39-528| [ KERNEL] [ 1.147938] usb usb5: Manufacturer: Linux 4.19.8 uhci_hcd 08-26-39-528| [ KERNEL] [ 1.147939] usb usb5: SerialNumber: 0000:00:1a.2 08-26-39-528| [ KERNEL] [ 1.148053] hub 5-0:1.0: USB hub found 08-26-39-528| [ KERNEL] [ 1.148058] hub 5-0:1.0: 2 ports detected 08-26-39-528| [ KERNEL] [ 1.148576] uhci_hcd 0000:00:1d.0: UHCI Host Controller 08-26-39-528| [ KERNEL] [ 1.148581] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 08-26-39-528| [ KERNEL] [ 1.148602] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80 08-26-39-528| [ KERNEL] [ 1.148644] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 08-26-39-528| [ KERNEL] [ 1.148645] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 08-26-39-528| [ KERNEL] [ 1.148647] usb usb6: Product: UHCI Host Controller 08-26-39-528| [ KERNEL] [ 1.148648] usb usb6: Manufacturer: Linux 4.19.8 uhci_hcd 08-26-39-528| [ KERNEL] [ 1.148649] usb usb6: SerialNumber: 0000:00:1d.0 08-26-39-528| [ KERNEL] [ 1.148763] hub 6-0:1.0: USB hub found 08-26-39-528| [ KERNEL] [ 1.148769] hub 6-0:1.0: 2 ports detected 08-26-39-528| [ KERNEL] [ 1.149301] uhci_hcd 0000:00:1d.1: UHCI Host Controller 08-26-39-528| [ KERNEL] [ 1.149308] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 08-26-39-528| [ KERNEL] [ 1.149330] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60 08-26-39-528| [ KERNEL] [ 1.149371] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 08-26-39-528| [ KERNEL] [ 1.149372] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 08-26-39-528| [ KERNEL] [ 1.149374] usb usb7: Product: UHCI Host Controller 08-26-39-528| [ KERNEL] [ 1.149375] usb usb7: Manufacturer: Linux 4.19.8 uhci_hcd 08-26-39-528| [ KERNEL] [ 1.149376] usb usb7: SerialNumber: 0000:00:1d.1 08-26-39-528| [ KERNEL] [ 1.149492] hub 7-0:1.0: USB hub found 08-26-39-528| [ KERNEL] [ 1.149497] hub 7-0:1.0: 2 ports detected 08-26-39-528| [ KERNEL] [ 1.150026] uhci_hcd 0000:00:1d.2: UHCI Host Controller 08-26-39-528| [ KERNEL] [ 1.150030] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 08-26-39-528| [ KERNEL] [ 1.150058] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40 08-26-39-528| [ KERNEL] [ 1.150099] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 08-26-39-528| [ KERNEL] [ 1.150101] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 08-26-39-528| [ KERNEL] [ 1.150102] usb usb8: Product: UHCI Host Controller 08-26-39-528| [ KERNEL] [ 1.150103] usb usb8: Manufacturer: Linux 4.19.8 uhci_hcd 08-26-39-528| [ KERNEL] [ 1.150105] usb usb8: SerialNumber: 0000:00:1d.2 08-26-39-528| [ KERNEL] [ 1.150225] hub 8-0:1.0: USB hub found 08-26-39-528| [ KERNEL] [ 1.150230] hub 8-0:1.0: 2 ports detected 08-26-39-528| [ KERNEL] [ 1.150532] i8042: PNP: No PS/2 controller found. 08-26-39-528| [ KERNEL] [ 1.150533] i8042: Probing ports directly. 08-26-39-528| [ KERNEL] [ 1.155157] serio: i8042 KBD port at 0x60,0x64 irq 1 08-26-39-528| [ KERNEL] [ 1.155162] serio: i8042 AUX port at 0x60,0x64 irq 12 08-26-39-528| [ KERNEL] [ 1.155282] hv_vmbus: registering driver hyperv_keyboard 08-26-39-528| [ KERNEL] [ 1.155331] mousedev: PS/2 mouse device common for all mice 08-26-39-528| [ KERNEL] [ 1.155539] usbcore: registered new interface driver usbtouchscreen 08-26-39-528| [ KERNEL] [ 1.155596] input: PC Speaker as /devices/platform/pcspkr/input/input3 08-26-39-528| [ KERNEL] [ 1.155689] rtc_cmos 00:01: RTC can wake from S4 08-26-39-528| [ KERNEL] [ 1.155829] rtc_cmos 00:01: registered as rtc0 08-26-39-528| [ KERNEL] [ 1.155863] rtc_cmos 00:01: alarms up to one day, 242 bytes nvram, hpet irqs 08-26-39-528| [ KERNEL] [ 1.155923] cpufreq_nforce2: No nForce2 chipset 08-26-39-528| [ KERNEL] [ 1.155979] hidraw: raw HID events driver (C) Jiri Kosina 08-26-39-528| [ KERNEL] [ 1.156142] hv_vmbus: registering driver hid_hyperv 08-26-39-528| [ KERNEL] [ 1.156403] usbcore: registered new interface driver usbhid 08-26-39-528| [ KERNEL] [ 1.156403] usbhid: USB HID core driver 08-26-39-528| [ KERNEL] [ 1.156567] NET: Registered protocol family 17 08-26-39-528| [ KERNEL] [ 1.157114] Using IPI No-Shortcut mode 08-26-39-528| [ KERNEL] [ 1.157118] sched_clock: Marking stable (1059530186, 93623224)->(1262373990, -109220580) 08-26-39-528| [ KERNEL] [ 1.157308] Loading compiled-in X.509 certificates 08-26-39-528| [ KERNEL] [ 1.158628] rtc_cmos 00:01: setting system clock to 2019-01-22 08:31:49 UTC (1548145909) 08-26-39-528| [ KERNEL] [ 1.158943] cfg80211: Loading compiled-in X.509 certificates for regulatory database 08-26-39-528| [ KERNEL] [ 1.171508] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' 08-26-39-528| [ KERNEL] [ 1.173578] Freeing unused kernel image memory: 3976K 08-26-39-528| [ KERNEL] [ 1.173638] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 08-26-39-528| [ KERNEL] [ 1.173641] cfg80211: failed to load regulatory.db 08-26-39-528| [ KERNEL] [ 1.185552] Write protecting the kernel text: 4656k 08-26-39-528| [ KERNEL] [ 1.185568] Write protecting the kernel read-only data: 872k 08-26-39-528| [ KERNEL] [ 1.185570] Run /init as init process 08-26-39-528| [ pfac] [ 1.413505] Run /sbin/initrd. 08-26-39-528| [ pfac] [ 1.413529] Ok, PID 697. 08-26-39-528| [ initrd] [ 1.413957] WTware 5.8.40 shell. 08-26-39-528| [ initrd] [ 1.415686] HDD/MMC/SD boot. 08-26-39-528| [ KERNEL] [ 1.689173] usb 6-1: new full-speed USB device number 2 using uhci_hcd 08-26-39-528| [ KERNEL] [ 1.887244] usb 6-1: New USB device found, idVendor=072f, idProduct=2200, bcdDevice= 2.14 08-26-39-528| [ KERNEL] [ 1.887248] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 08-26-39-528| [ KERNEL] [ 1.887250] usb 6-1: Product: ACR122U PICC Interface 08-26-39-528| [ KERNEL] [ 1.887253] usb 6-1: Manufacturer: ACS 08-26-39-528| [ KERNEL] [ 2.101174] tsc: Refined TSC clocksource calibration: 2493.749 MHz 08-26-39-528| [ KERNEL] [ 2.101184] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f228f923f, max_idle_ns: 440795318852 ns 08-26-39-528| [ KERNEL] [ 2.101200] clocksource: Switched to clocksource tsc 08-26-39-528| [ KERNEL] [ 2.589164] usb 8-1: new full-speed USB device number 2 using uhci_hcd 08-26-39-528| [ KERNEL] [ 2.807182] usb 8-1: New USB device found, idVendor=413c, idProduct=2101, bcdDevice= 2.01 08-26-39-528| [ KERNEL] [ 2.807186] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 08-26-39-528| [ KERNEL] [ 2.807189] usb 8-1: Product: Dell Smart Card Reader Keyboard 08-26-39-528| [ KERNEL] [ 2.807192] usb 8-1: Manufacturer: Dell 08-26-39-528| [ KERNEL] [ 2.815020] input: Dell Dell Smart Card Reader Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/0003:413C:2101.0001/input/input6 08-26-39-528| [ KERNEL] [ 2.873401] hid-generic 0003:413C:2101.0001: input,hidraw0: USB HID v1.11 Keyboard [Dell Dell Smart Card Reader Keyboard] on usb-0000:00:1d.2-1/input0 08-26-39-528| [ initrd] [ 3.043692] Load VFAT filesystem driver. 08-26-39-528| [ initrd] [ 3.043715] modprobe fat. 08-26-39-528| [ initrd] [ 3.045054] modprobe vfat. 08-26-39-528| [ initrd] [ 3.046464] Load IDE bus driver. 08-26-39-528| [ initrd] [ 3.046487] modprobe libata. 08-26-39-528| [ initrd] [ 3.051111] modprobe ata_piix. 08-26-39-528| [ KERNEL] [ 3.141801] SCSI subsystem initialized 08-26-39-528| [ KERNEL] [ 3.142979] libata version 3.00 loaded. 08-26-39-528| [ KERNEL] [ 3.146158] ata_piix 0000:00:1f.2: version 2.13 08-26-39-528| [ KERNEL] [ 3.146581] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] 08-26-39-528| [ KERNEL] [ 3.305857] scsi host0: ata_piix 08-26-39-528| [ KERNEL] [ 3.306984] scsi host1: ata_piix 08-26-39-528| [ KERNEL] [ 3.307034] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfec0 irq 14 08-26-39-528| [ KERNEL] [ 3.307037] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfec8 irq 15 08-26-39-528| [ KERNEL] [ 3.307467] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] 08-26-39-528| [ KERNEL] [ 3.466568] scsi host2: ata_piix 08-26-39-528| [ KERNEL] [ 3.467018] scsi host3: ata_piix 08-26-39-528| [ KERNEL] [ 3.467061] ata3: SATA max UDMA/133 cmd 0xfe40 ctl 0xfe50 bmdma 0xfed0 irq 18 08-26-39-528| [ KERNEL] [ 3.467064] ata4: SATA max UDMA/133 cmd 0xfe60 ctl 0xfe70 bmdma 0xfed8 irq 18 08-26-39-528| [ KERNEL] [ 3.649164] usb 8-2: new low-speed USB device number 3 using uhci_hcd 08-26-39-528| [ KERNEL] [ 3.779477] ata4: SATA link down (SStatus 0 SControl 300) 08-26-39-528| [ KERNEL] [ 3.779528] ata3: SATA link down (SStatus 4 SControl 300) 08-26-39-528| [ KERNEL] [ 3.845186] usb 8-2: New USB device found, idVendor=046d, idProduct=c050, bcdDevice=27.20 08-26-39-528| [ KERNEL] [ 3.845190] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 08-26-39-528| [ KERNEL] [ 3.845193] usb 8-2: Product: USB-PS/2 Optical Mouse 08-26-39-528| [ KERNEL] [ 3.845196] usb 8-2: Manufacturer: Logitech 08-26-39-528| [ KERNEL] [ 3.863057] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/0003:046D:C050.0002/input/input7 08-26-39-528| [ KERNEL] [ 3.863171] hid-generic 0003:046D:C050.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-2/input0 08-26-39-528| [ KERNEL] [ 4.089221] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) 08-26-39-528| [ KERNEL] [ 4.089233] ata1.01: SATA link down (SStatus 4 SControl 300) 08-26-39-528| [ KERNEL] [ 4.089476] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 08-26-39-528| [ KERNEL] [ 4.089487] ata2.01: SATA link down (SStatus 4 SControl 300) 08-26-39-528| [ KERNEL] [ 4.089496] ata2.01: link offline, clearing class 3 to NONE 08-26-39-528| [ KERNEL] [ 4.089687] ata1.00: ATA-9: GOODRAM, SAFM12.2, max UDMA/133 08-26-39-528| [ KERNEL] [ 4.089691] ata1.00: 234441648 sectors, multi 8: LBA48 NCQ (depth 0/32) 08-26-39-528| [ KERNEL] [ 4.090049] ata1.00: configured for UDMA/133 08-26-39-528| [ KERNEL] [ 4.090172] scsi 0:0:0:0: Direct-Access ATA GOODRAM 12.2 PQ: 0 ANSI: 5 08-26-39-528| [ KERNEL] [ 4.109358] ata2.00: ATAPI: ATAPI iHAS124 D, 8L08, max UDMA/100 08-26-39-528| [ KERNEL] [ 4.113845] ata2.00: configured for UDMA/100 08-26-39-528| [ KERNEL] [ 4.116039] scsi 1:0:0:0: CD-ROM ATAPI iHAS124 D 8L08 PQ: 0 ANSI: 5 08-26-39-528| [ initrd] [ 4.052763] ATA module ata_piix.ko loaded. 08-26-39-528| [ initrd] [ 4.052900] modprobe ahci. 08-26-39-528| [ initrd] [ 4.055260] ATA module ahci.ko loaded. 08-26-39-528| [ initrd] [ 4.055470] modprobe pata_legacy all=1. 08-26-39-528| [SYSLOG] <29>Jan 22 08:31:52 modprobe: FATAL: Error inserting pata_legacy (/lib/modules/4.19.8/kernel/drivers/ata/pata_legacy.ko): No such device 08-26-39-528| [ initrd] [ 4.087811] modprobe mmc_block. 08-26-39-528| [ initrd] [ 4.089733] modprobe sdhci-pci. 08-26-39-528| [ initrd] [ 4.092719] modprobe sdhci-acpi. 08-26-39-528| [ KERNEL] [ 4.185789] sdhci: Secure Digital Host Controller Interface driver 08-26-39-528| [ KERNEL] [ 4.185791] sdhci: Copyright(c) Pierre Ossman 08-26-39-528| [ initrd] [ 4.094506] modprobe sdhci-pltfm. 08-26-39-528| [ initrd] [ 4.096198] Load HDD drivers. 08-26-39-528| [ KERNEL] [ 4.189676] sdhci-pltfm: SDHCI platform and OF driver helper 08-26-39-528| [ initrd] [ 4.096234] modprobe sd_mod. 08-26-39-528| [ KERNEL] [ 4.191218] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) 08-26-39-528| [ KERNEL] [ 4.191230] sd 0:0:0:0: [sda] Write Protect is off 08-26-39-528| [ KERNEL] [ 4.191232] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 08-26-39-528| [ KERNEL] [ 4.191246] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA 08-26-39-528| [ KERNEL] [ 4.191641] sda: sda1 sda2 08-26-39-528| [ KERNEL] [ 4.191879] sd 0:0:0:0: [sda] Attached SCSI disk 08-26-39-528| [ initrd] [ 4.099561] Success: media /dev/sda1 mounted to /bootmedia. 08-26-39-528| [ initrd] [ 4.102108] Cache package files: auto. 08-26-39-528| [ initrd] [ 4.102125] WTpassword empty. 08-26-39-528| [ initrd] [ 4.102140] Disable cache package files. 08-26-39-528| [ initrd] [ 4.102157] Unpack /bootmedia/packages/lib6. 08-26-39-528| [ initrd] [ 4.519933] PCI: C 01:01 8086:3a06 Mass storage controller IDE interface Intel Corporation 82801JD/DO (ICH10 Family) 2-port SATA IDE Controller. 08-26-39-528| [ initrd] [ 4.519969] PCI: C 02 8086:10de Network controller Intel Corporation 82567LM-3 Gigabit Network Connection. 08-26-39-528| [ initrd] [ 4.519984] PCI: C 06:04 8086:244e Bridge PCI bridge Intel Corporation 82801 PCI Bridge. 08-26-39-528| [ initrd] [ 4.519998] PCI: C 01:01 8086:2e16 Mass storage controller IDE interface Intel Corporation 4 Series Chipset PT IDER Controller. 08-26-39-528| [ initrd] [ 4.520011] PCI: C 0c:05 8086:3a60 Serial bus controller SMBus Intel Corporation 82801JD/DO (ICH10 Family) SMBus Controller. 08-26-39-528| [ initrd] [ 4.520025] PCI: C 06 8086:2e10 Bridge Intel Corporation 4 Series Chipset DRAM Controller. 08-26-39-528| [ initrd] [ 4.520038] PCI: C 06:04 8086:3a72 Bridge PCI bridge Intel Corporation 82801JD/DO (ICH10 Family) PCI Express Port 2. 08-26-39-528| [ initrd] [ 4.520052] PCI: C 0c:03 8086:3a69 Serial bus controller USB controller Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller. 08-26-39-528| [ initrd] [ 4.520065] PCI: C 07:80 8086:2e14 Communication controller Communication controller Intel Corporation 4 Series Chipset HECI Controller. 08-26-39-528| [ initrd] [ 4.520079] PCI: C 0c:03 8086:3a66 Serial bus controller USB controller Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller. 08-26-39-528| [ initrd] [ 4.520092] PCI: C 0c:03 8086:3a67 Serial bus controller USB controller Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller. 08-26-39-528| [ initrd] [ 4.520105] PCI: C 0c:03 8086:3a64 Serial bus controller USB controller Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller. 08-26-39-528| [ initrd] [ 4.520119] PCI: C 0c:03 8086:3a6c Serial bus controller USB controller Intel Corporation 82801JD/DO (ICH10 Family) USB2 EHCI Controller. 08-26-39-528| [ initrd] [ 4.520132] PCI: C 03 8086:2e12 Display controller Intel Corporation 4 Series Chipset Integrated Graphics Controller. 08-26-39-528| [ initrd] [ 4.520145] PCI: C 0c:03 8086:3a6a Serial bus controller USB controller Intel Corporation 82801JD/DO (ICH10 Family) USB2 EHCI Controller. 08-26-39-528| [ initrd] [ 4.520158] PCI: C 07 8086:2e17 Communication controller Intel Corporation 4 Series Chipset Serial KT Controller. 08-26-39-528| [ initrd] [ 4.520172] PCI: C 01:01 8086:3a00 Mass storage controller IDE interface Intel Corporation 82801JD/DO (ICH10 Family) 4-port SATA IDE Controller. 08-26-39-528| [ initrd] [ 4.520185] PCI: C 06:04 8086:3a70 Bridge PCI bridge Intel Corporation 82801JD/DO (ICH10 Family) PCI Express Port 1. 08-26-39-528| [ initrd] [ 4.520198] PCI: C 0c:03 8086:3a68 Serial bus controller USB controller Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller. 08-26-39-528| [ initrd] [ 4.520212] PCI: C 06:01 8086:3a1a Bridge ISA bridge Intel Corporation 82801JD (ICH10D) LPC Interface Controller. 08-26-39-528| [ initrd] [ 4.520225] PCI: C 06:04 8086:2e11 Bridge PCI bridge Intel Corporation 4 Series Chipset PCI Express Root Port. 08-26-39-528| [ initrd] [ 4.520238] PCI: C 0c:03 8086:3a65 Serial bus controller USB controller Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller. 08-26-39-528| [ initrd] [ 4.520252] PCI: C 03:80 8086:2e13 Display controller Display controller Intel Corporation 4 Series Chipset Integrated Graphics Controller. 08-26-39-528| [ initrd] [ 4.520266] PCI: C 04:03 8086:3a6e Multimedia controller Audio device Intel Corporation 82801JD/DO (ICH10 Family) HD Audio Controller. 08-26-39-528| [ initrd] [ 4.532297] USB: 413c:2101 Dell Computer Corp. SmartCard Reader Keyboard. 08-26-39-528| [ initrd] [ 4.532315] USB: 046d:c050 Logitech, Inc. RX 250 Optical Mouse. 08-26-39-528| [ initrd] [ 4.532329] USB: 072f:2200 Advanced Card Systems, Ltd ACR122U. 08-26-39-528| /--- FILE "/bootmedia/configs/initrd.wtc" ----------------------- 08-26-39-528| | [BOM] 08-26-39-528| | clientIP=192.168.2.84 08-26-39-528| | netmask=255.255.255.0 08-26-39-528| | routerIP=192.168.2.1 08-26-39-528| | nameserverIP=192.168.2.3 08-26-39-528| | config=http 08-26-39-528| | tftpPrefix=/wtware/ 08-26-39-528| | tftpIP=192.168.2.99 08-26-39-528| \---------------------------------------------------- 08-26-39-528| [ initrd] [ 5.044840] Load ethernet drivers. 08-26-39-528| [ initrd] [ 5.046369] modprobe e1000e. 08-26-39-528| [ KERNEL] [ 5.141541] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k 08-26-39-528| [ KERNEL] [ 5.141543] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. 08-26-39-528| [ KERNEL] [ 5.142049] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode 08-26-39-528| [ initrd] [ 5.250189] NIC module e1000e.ko loaded. 08-26-39-528| [ KERNEL] [ 5.343555] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:23:ae:7c:51:dd 08-26-39-528| [ KERNEL] [ 5.343557] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection 08-26-39-528| [ KERNEL] [ 5.343593] e1000e 0000:00:19.0 eth0: MAC: 8, PHY: 8, PBA No: 8021FF-0FF 08-26-39-528| [ KERNEL] [ 8.622010] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None 08-26-39-528| [ initrd] [ 8.566671] eth0: 8086:10de. Apply WOL configuration. 08-26-39-528| [ initrd] [ 8.566711] Download configs from HTTP 192.168.2.99 port 789 prefix '/wtware/'. 08-26-39-528| [ initrd] [ 8.566725] WTpassword empty. 08-26-39-528| WTC listener is active. 08-26-39-528| WTC broadcast listener is active. 08-26-39-528| Send broadcast WTCU discover. 08-26-39-528| [ pfac] [ 8.567134] Run /sbin/httpd. 08-26-39-528| [ initrd] [ 8.567145] Run '/sbin/httpd', log '/tmp/httpd.out', env '', pid ''. 08-26-39-528| [ pfac] [ 8.567163] Ok, PID 861. 08-26-39-528| [ initrd] [ 8.567172] [HTTP] Download config file /wtware/Everyone/list.wtc from 192.168.2.99. 08-26-39-528| [ httpd] [ 8.568215] HTTP Server, WTware 5.8.40 08-26-39-528| [ KERNEL] [ 8.664582] random: httpd: uninitialized urandom read (32 bytes read) 08-26-39-528| [ initrd] [ 8.572748] [HTTP] Download config file /wtware/Terminals/00.23.AE.7C.51.DD/config.wtc from 192.168.2.99. 08-26-39-528| [ initrd] [ 8.573736] [HTTP] Download config file /wtware/Terminals/00.23.AE.7C.51.DD/wtware.lic from 192.168.2.99. 08-26-39-528| [ initrd] [ 8.574615] [HTTP] File not found. 08-26-39-528| /--- FILE "/tmp/config.wtc" ----------------------- 08-26-39-528| | bpp=32 08-26-39-528| | video=intel(U) 08-26-39-528| | display=1680x1050, VGA 08-26-39-528| | graphic=abcdefg 08-26-39-528| | keyboard=pl 08-26-39-528| | domain=eskulap.local 08-26-39-528| | skin=sample 08-26-39-528| | smartcard=acr122, dell 08-26-39-528| | clienthostname=TERMINAL-TEST-6 08-26-39-528| | connection 08-26-39-528| \---------------------------------------------------- 08-26-39-528| [ initrd] [ 8.574769] [HTTP] Download config file /wtware/Everyone/all.wtc from 192.168.2.99. 08-26-39-528| /--- FILE "/tmp/all.wtc" ----------------------- 08-26-39-528| | [BOM] 08-26-39-528| | server=192.168.2.99 08-26-39-528| | graphic=abcdefg 08-26-39-528| \---------------------------------------------------- 08-26-39-528| [ initrd] [ 8.575899] [HTTP] Download config file /wtware/Everyone/wtware.lic from 192.168.2.99. 08-26-39-528| [ initrd] [ 8.577212] Remount /bootmedia for writing. 08-26-39-528| [ initrd] [ 8.586131] Remount /bootmedia as read-only. 08-26-39-528| /--- FILE "/etc/config.compiled" ----------------------- 08-26-39-528| | [BOM] 08-26-39-528| | server=192.168.2.99 08-26-39-528| | graphic=abcdefg 08-26-39-528| | bpp=32 08-26-39-528| | video=intel(U) 08-26-39-528| | display=1680x1050, VGA 08-26-39-528| | keyboard=pl 08-26-39-528| | domain=eskulap.local 08-26-39-528| | skin=sample 08-26-39-528| | smartcard=acr122, dell 08-26-39-528| | clienthostname=TERMINAL-TEST-6 08-26-39-528| | connection 08-26-39-528| \---------------------------------------------------- 08-26-39-528| [ initrd] [ 8.586856] Hostname: "TERMINAL-TEST-6". 08-26-39-528| [ initrd] [ 8.586879] [NTP] 42 DHCP option is not set. 08-26-39-528| Everyone can control terminal by RSH. 08-26-39-528| RSH: listener is active. 08-26-39-528| Send broadcast WTCU discover. 08-26-39-528| [ httpd] [ 8.587564] Reread settings. 08-26-39-528| [ httpd] [ 8.587626] Everyone can control terminal by HTTP. 08-26-39-528| [ initrd] [ 8.589129] Unpack /bootmedia/packages/uintel. 08-26-39-528| [ initrd] [ 8.699939] Unpack /bootmedia/packages/f. 08-26-39-528| [ initrd] [ 8.807827] Unpack /bootmedia/packages/f-i915. 08-26-39-528| [ initrd] [ 8.892702] Unpack /bootmedia/packages/u. 08-26-39-528| [ initrd] [ 9.497857] Unpack /bootmedia/packages/dbus. 08-26-39-528| [ initrd] [ 9.606890] +--- Executing "/usr/bin/dbus-uuidgen --ensure" 08-26-39-528| [ initrd] [ 9.608491] +- Errorlevel: 0, output: 08-26-39-528| File is empty. 08-26-39-528| [ initrd] [ 9.608546] +------------------------ 08-26-39-528| [ initrd] [ 9.608561] +--- Executing "/usr/bin/dbus-daemon --system" 08-26-39-528| [ KERNEL] [ 9.703860] random: dbus-daemon: uninitialized urandom read (12 bytes read) 08-26-39-528| [ initrd] [ 9.614374] +- Errorlevel: 0, output: 08-26-39-528| [ KERNEL] [ 9.707281] random: dbus-daemon: uninitialized urandom read (12 bytes read) 08-26-39-528| File is empty. 08-26-39-528| [ initrd] [ 9.614440] +------------------------ 08-26-39-528| [ initrd] [ 9.614484] Unpack /bootmedia/packages/graphic. 08-26-39-528| [ gm] [ 9.624666] WTware 5.8.40 session manager. 08-26-39-528| [ gm] [ 9.624973] Load agpgart driver. 08-26-39-528| [ gm] [ 9.624989] modprobe agpgart. 08-26-39-528| [ gm] [ 9.626485] modprobe intel-agp. 08-26-39-528| [ KERNEL] [ 9.719943] Linux agpgart interface v0.103 08-26-39-528| [ gm] [ 9.687587] EV_REL flag found. Add mouse event4: Logitech USB-PS/2 Optical Mouse. 08-26-39-528| [ gm] [ 9.687667] Add keyboard event3: Dell Dell Smart Card Reader Keyboard. 08-26-39-528| [ gm] [ 9.687694] Ignore event2: PC Speaker. 08-26-39-528| [ gm] [ 9.719569] Add keyboard event1: Power Button. 08-26-39-528| [ gm] [ 9.719615] Add keyboard event0: Power Button. 08-26-39-528| [ gm] [ 9.719700] Display mode: 1680x1050, 32 bit, landscape, 0 Hz, modeline "", DDC enabled, connector 1. 08-26-39-528| /--- FILE "/etc/xorg.conf" ----------------------- 08-26-39-528| | Section "InputDevice" 08-26-39-528| | Identifier "Mouse0" 08-26-39-528| | Driver "evdev" 08-26-39-528| | Option "Device" "/dev/input/event4" 08-26-39-528| | Option "SendCoreEvents" "on" 08-26-39-528| | EndSection 08-26-39-528| | Section "InputDevice" 08-26-39-528| | Identifier "Keyboard0" 08-26-39-528| | Driver "evdev" 08-26-39-528| | Option "Device" "/dev/input/event3" 08-26-39-528| | Option "SendCoreEvents" "on" 08-26-39-528| | Option "XkbLayout" "us" 08-26-39-528| | Option "XkbRules" "evdev" 08-26-39-528| | EndSection 08-26-39-528| | Section "InputDevice" 08-26-39-528| | Identifier "Keyboard1" 08-26-39-528| | Driver "evdev" 08-26-39-528| | Option "Device" "/dev/input/event1" 08-26-39-528| | Option "SendCoreEvents" "on" 08-26-39-528| | Option "XkbLayout" "us" 08-26-39-528| | Option "XkbRules" "evdev" 08-26-39-528| | EndSection 08-26-39-528| | Section "InputDevice" 08-26-39-528| | Identifier "Keyboard2" 08-26-39-528| | Driver "evdev" 08-26-39-528| | Option "Device" "/dev/input/event0" 08-26-39-528| | Option "SendCoreEvents" "on" 08-26-39-528| | Option "XkbLayout" "us" 08-26-39-528| | Option "XkbRules" "evdev" 08-26-39-528| | EndSection 08-26-39-528| | Section "ServerFlags" 08-26-39-528| | Option "DontVTSwitch" "on" 08-26-39-528| | Option "DontZoom" "on" 08-26-39-528| | Option "DontZap" "on" 08-26-39-528| | Option "NoPM" "on" 08-26-39-528| | Option "AutoAddDevices" "off" 08-26-39-528| | EndSection 08-26-39-528| | Section "Device" 08-26-39-528| | Identifier "Video0" 08-26-39-528| | Driver "intel" 08-26-39-528| | EndSection 08-26-39-528| | Section "Monitor" 08-26-39-528| | Identifier "Monitor0" 08-26-39-528| | HorizSync 20-200 08-26-39-528| | VertRefresh 50-60 08-26-39-528| | Option "PreferredMode" "1680x1050" 08-26-39-528| | EndSection 08-26-39-528| | Section "Screen" 08-26-39-528| | Identifier "Screen0" 08-26-39-528| | Device "Video0" 08-26-39-528| | Monitor "Monitor0" 08-26-39-528| | DefaultDepth 24 08-26-39-528| | SubSection "Display" 08-26-39-528| | Depth 24 08-26-39-528| | Modes "1680x1050" 08-26-39-528| | Virtual 1680 1050 08-26-39-528| | EndSubSection 08-26-39-528| | EndSection 08-26-39-528| | Section "ServerLayout" 08-26-39-528| | Identifier "Layout" 08-26-39-528| | Screen "Screen0" 08-26-39-528| | InputDevice "Mouse0" 08-26-39-528| | InputDevice "Keyboard0" 08-26-39-528| | InputDevice "Keyboard1" 08-26-39-528| | InputDevice "Keyboard2" 08-26-39-528| | EndSection 08-26-39-528| \---------------------------------------------------- 08-26-39-528| [ gm] [ 9.745209] modprobe i915. 08-26-39-528| [ KERNEL] [ 9.851113] pci 0000:00:00.0: Intel Q45/Q43 Chipset 08-26-39-528| [ KERNEL] [ 9.851127] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable 08-26-39-528| [ KERNEL] [ 9.851616] pci 0000:00:00.0: detected 32768K stolen memory 08-26-39-528| [ KERNEL] [ 9.851656] [drm] Replacing VGA console driver 08-26-39-528| [ KERNEL] [ 9.852439] Console: switching to colour dummy device 80x25 08-26-39-528| [ KERNEL] [ 9.858433] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). 08-26-39-528| [ KERNEL] [ 9.858435] [drm] Driver supports precise vblank timestamp query. 08-26-39-528| [ KERNEL] [ 9.861326] [drm] RC6 disabled, disabling runtime PM support 08-26-39-528| [ KERNEL] [ 9.861609] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0 08-26-39-528| [ KERNEL] [ 10.023284] fbcon: inteldrmfb (fb0) is primary device 08-26-39-528| [ KERNEL] [ 10.048564] Console: switching to colour frame buffer device 128x48 08-26-39-528| [ gm] [ 9.974787] count_fbs 0. 08-26-39-528| [ KERNEL] [ 10.068063] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device 08-26-39-528| [ gm] [ 9.974815] count_crtcs 2. 08-26-39-528| [ gm] [ 9.974830] count_connectors 3. 08-26-39-528| [ gm] [ 9.974848] count_encoders 3. 08-26-39-528| [ gm] [ 9.974862] min_width 0, max_width 8192, min_height 0, max_height 8192. 08-26-39-528| [ gm] [ 10.255894] ====================== 08-26-39-528| [ gm] [ 10.255936] connector_id 52. 08-26-39-528| [ gm] [ 10.255959] encoder_id 53. 08-26-39-528| [ gm] [ 10.255981] connector_type VGA (1). 08-26-39-528| [ gm] [ 10.256003] connector_type_id 1. 08-26-39-528| [ gm] [ 10.256025] connection 1. 08-26-39-528| [ gm] [ 10.256046] mm_width 0, mm_height 0. 08-26-39-528| [ gm] [ 10.256068] subpixel 0. 08-26-39-528| [ gm] [ 10.256090] count_modes 5. 08-26-39-528| [ gm] [ 10.256111] count_props 4. 08-26-39-528| [ gm] [ 10.256133] count_encoders 1. 08-26-39-528| [ gm] [ 10.256155] encoders_ptr [53] 08-26-39-528| [ gm] [ 10.256177] ====================== 08-26-39-528| [ gm] [ 10.258546] ====================== 08-26-39-528| [ gm] [ 10.258595] connector_id 55. 08-26-39-528| [ gm] [ 10.258641] encoder_id 0. 08-26-39-528| [ gm] [ 10.258687] connector_type HDMIA (11). 08-26-39-528| [ gm] [ 10.258737] connector_type_id 1. 08-26-39-528| [ gm] [ 10.258759] connection 2. 08-26-39-528| [ gm] [ 10.258781] mm_width 0, mm_height 0. 08-26-39-528| [ gm] [ 10.258803] subpixel 0. 08-26-39-528| [ gm] [ 10.258825] count_modes 0. 08-26-39-528| [ gm] [ 10.258847] count_props 8. 08-26-39-528| [ gm] [ 10.258868] count_encoders 1. 08-26-39-528| [ gm] [ 10.258890] encoders_ptr [54] 08-26-39-528| [ gm] [ 10.258911] ====================== 08-26-39-528| [ gm] [ 10.258939] ====================== 08-26-39-528| [ gm] [ 10.258962] connector_id 61. 08-26-39-528| [ gm] [ 10.258984] encoder_id 0. 08-26-39-528| [ gm] [ 10.259006] connector_type DisplayPort (10). 08-26-39-528| [ gm] [ 10.259028] connector_type_id 1. 08-26-39-528| [ gm] [ 10.259050] connection 2. 08-26-39-528| [ gm] [ 10.259071] mm_width 0, mm_height 0. 08-26-39-528| [ gm] [ 10.259093] subpixel 0. 08-26-39-528| [ gm] [ 10.259115] count_modes 0. 08-26-39-528| [ gm] [ 10.259136] count_props 5. 08-26-39-528| [ gm] [ 10.259158] count_encoders 1. 08-26-39-528| [ gm] [ 10.259180] encoders_ptr [60] 08-26-39-528| [ gm] [ 10.259201] ====================== 08-26-39-528| [ gm] [ 10.259226] ====================== 08-26-39-528| [ gm] [ 10.259247] crtc_id 39. 08-26-39-528| [ gm] [ 10.259270] fb buffer_id 69. 08-26-39-528| [ gm] [ 10.259292] x 0, y 0. 08-26-39-528| [ gm] [ 10.259314] mode_valid 1. 08-26-39-528| [ gm] [ 10.259338] Mode 1024x768: clock 65000 H 1024 1048 1184 1344 0 V 768 771 777 806 0 VR 60 flags 0x000a type 0x0040. 08-26-39-528| [ gm] [ 10.259360] gamma_size 256. 08-26-39-528| [ gm] [ 10.259382] 0 connectors. 08-26-39-528| [ gm] [ 10.259404] ====================== 08-26-39-528| [ gm] [ 10.259426] ====================== 08-26-39-528| [ gm] [ 10.259448] crtc_id 51. 08-26-39-528| [ gm] [ 10.259470] fb buffer_id 0 (disconnected from fb). 08-26-39-528| [ gm] [ 10.259492] x 0, y 0. 08-26-39-528| [ gm] [ 10.259514] mode_valid 0. 08-26-39-528| [ gm] [ 10.259548] Mode : clock 0 H 0 0 0 0 0 V 0 0 0 0 0 VR 0 flags 0x0000 type 0x0000. 08-26-39-528| [ gm] [ 10.259570] gamma_size 256. 08-26-39-528| [ gm] [ 10.259592] 0 connectors. 08-26-39-528| [ gm] [ 10.259613] ====================== 08-26-39-528| [ gm] [ 10.259637] ====================== 08-26-39-528| [ gm] [ 10.259659] encoder_id 53. 08-26-39-528| [ gm] [ 10.259681] encoder_type DAC (1). 08-26-39-528| [ gm] [ 10.259703] crtc_id 39. 08-26-39-528| [ gm] [ 10.259725] possible_crtcs 3. 08-26-39-528| [ gm] [ 10.259747] possible_clones 3. 08-26-39-528| [ gm] [ 10.259768] ====================== 08-26-39-528| [ gm] [ 10.259791] ====================== 08-26-39-528| [ gm] [ 10.259813] encoder_id 54. 08-26-39-528| [ gm] [ 10.259835] encoder_type TMDS (2). 08-26-39-528| [ gm] [ 10.259857] crtc_id 0. 08-26-39-528| [ gm] [ 10.259878] possible_crtcs 3. 08-26-39-528| [ gm] [ 10.259900] possible_clones 3. 08-26-39-528| [ gm] [ 10.259921] ====================== 08-26-39-528| [ gm] [ 10.259944] ====================== 08-26-39-528| [ gm] [ 10.259966] encoder_id 60. 08-26-39-528| [ gm] [ 10.259988] encoder_type TMDS (2). 08-26-39-528| [ gm] [ 10.260010] crtc_id 0. 08-26-39-528| [ gm] [ 10.260032] possible_crtcs 3. 08-26-39-528| [ gm] [ 10.260057] possible_clones 4. 08-26-39-528| [ gm] [ 10.260079] ====================== 08-26-39-528| /--- FILE "/proc/mtrr" ----------------------- 08-26-39-528| | reg00: base=0x0cde00000 ( 3294MB), size= 2MB, count=1: uncachable 08-26-39-528| | reg01: base=0x0ce000000 ( 3296MB), size= 32MB, count=1: uncachable 08-26-39-528| | reg02: base=0x0cdd00000 ( 3293MB), size= 1MB, count=1: uncachable 08-26-39-528| | reg03: base=0x0d0000000 ( 3328MB), size= 256MB, count=1: uncachable 08-26-39-528| | reg04: base=0x0e0000000 ( 3584MB), size= 512MB, count=1: uncachable 08-26-39-528| \---------------------------------------------------- 08-26-39-528| [ gm] [ 10.406303] Run '/usr/lib/xorg/Xorg -nolisten inet6 -s 0 -quiet -logfile /tmp/Xorg.0.log', log '/tmp/Xorg.out', env '', pid ''. 08-26-39-528| [ pfac] [ 10.406343] Run /usr/lib/xorg/Xorg -nolisten inet6 -s 0 -quiet -logfile /tmp/Xorg.0.log. 08-26-39-528| [ pfac] [ 10.406410] Ok, PID 924. 08-26-39-528| [ X] [ 10.410107] [ 10.410] 08-26-39-528| [ X] [ 10.410137] X.Org X Server 1.19.2 08-26-39-528| [ X] [ 10.410145] Release Date: 2017-03-02 08-26-39-528| [ X] [ 10.410180] [ 10.410] X Protocol Version 11, Revision 0 08-26-39-528| [ X] [ 10.410216] [ 10.410] Build Operating System: Linux 4.9.0-8-amd64 i686 Debian 08-26-39-528| [ X] [ 10.410253] [ 10.410] Current Operating System: Linux wtware 4.19.8 #3 SMP Sat Dec 8 23:42:58 UTC 2018 i686 08-26-39-528| [ X] [ 10.410309] [ 10.410] Kernel command line: wtboot=hdd5 quiet BOOT_IMAGE=packages/kernel 08-26-39-528| [ X] [ 10.410352] [ 10.410] Build Date: 03 November 2018 03:08:43AM 08-26-39-528| [ X] [ 10.410388] [ 10.410] xorg-server 2:1.19.2-1+deb9u5 (https://www.debian.org/support) 08-26-39-528| [ X] [ 10.410425] [ 10.410] Current version of pixman: 0.34.0 08-26-39-528| [ X] [ 10.410461] [ 10.410] Before reporting problems, check http://wiki.x.org 08-26-39-528| [ X] [ 10.410468] to make sure that you have the latest version. 08-26-39-528| [ X] [ 10.410541] [ 10.410] Markers: (--) probed, (**) from config file, (==) default setting, 08-26-39-528| [ X] [ 10.410588] (++) from command line, (!!) notice, (II) informational, 08-26-39-528| [ X] [ 10.410646] (WW) warning, (EE) error, (NI) not implemented, (??) unknown. 08-26-39-528| [ X] [ 10.410696] [ 10.410] (++) Log file: "/tmp/Xorg.0.log", Time: Tue Jan 22 08:31:58 2019 08-26-39-528| [ X] [ 10.410771] [ 10.410] (==) Using config file: "/etc/xorg.conf" 08-26-39-528| [ X] [ 10.410898] [ 10.410] (==) ServerLayout "Layout" 08-26-39-528| [ X] [ 10.410936] [ 10.410] (**) |-->Screen "Screen0" (0) 08-26-39-528| [ X] [ 10.410972] [ 10.410] (**) | |-->Monitor "Monitor0" 08-26-39-528| [ X] [ 10.411160] [ 10.411] (**) | |-->Device "Video0" 08-26-39-528| [ X] [ 10.411201] [ 10.411] (**) |-->Input Device "Mouse0" 08-26-39-528| [ X] [ 10.411238] [ 10.411] (**) |-->Input Device "Keyboard0" 08-26-39-528| [ X] [ 10.411274] [ 10.411] (**) |-->Input Device "Keyboard1" 08-26-39-528| [ X] [ 10.411309] [ 10.411] (**) |-->Input Device "Keyboard2" 08-26-39-528| [ X] [ 10.411377] [ 10.411] (**) Option "DontVTSwitch" "on" 08-26-39-528| [ X] [ 10.411438] [ 10.411] (**) Option "DontZap" "on" 08-26-39-528| [ X] [ 10.411499] [ 10.411] (**) Option "DontZoom" "on" 08-26-39-528| [ X] [ 10.411578] [ 10.411] (**) Option "NoPM" "on" 08-26-39-528| [ X] [ 10.411644] [ 10.411] (**) Option "AutoAddDevices" "off" 08-26-39-528| [ X] [ 10.411687] [ 10.411] (**) Not automatically adding devices 08-26-39-528| [ X] [ 10.411723] [ 10.411] (==) Automatically enabling devices 08-26-39-528| [ X] [ 10.411758] [ 10.411] (==) Automatically adding GPU devices 08-26-39-528| [ X] [ 10.411802] [ 10.411] (==) Max clients allowed: 256, resource mask: 0x1fffff 08-26-39-528| [ X] [ 10.411843] [ 10.411] (WW) The directory "/usr/share/fonts/X11/misc" does not exist. 08-26-39-528| [ X] [ 10.411878] [ 10.411] Entry deleted from font path. 08-26-39-528| [ X] [ 10.411917] [ 10.411] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. 08-26-39-528| [ X] [ 10.411952] [ 10.411] Entry deleted from font path. 08-26-39-528| [ X] [ 10.411995] [ 10.411] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. 08-26-39-528| [ X] [ 10.412030] [ 10.412] Entry deleted from font path. 08-26-39-528| [ X] [ 10.412069] [ 10.412] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. 08-26-39-528| [ X] [ 10.412104] [ 10.412] Entry deleted from font path. 08-26-39-528| [ X] [ 10.412143] [ 10.412] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist. 08-26-39-528| [ X] [ 10.412178] [ 10.412] Entry deleted from font path. 08-26-39-528| [ X] [ 10.412217] [ 10.412] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. 08-26-39-528| [ X] [ 10.412252] [ 10.412] Entry deleted from font path. 08-26-39-528| [ X] [ 10.412290] [ 10.412] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. 08-26-39-528| [ X] [ 10.412326] [ 10.412] Entry deleted from font path. 08-26-39-528| [ X] [ 10.412365] [ 10.412] (==) FontPath set to: 08-26-39-528| [ X] [ 10.412373] built-ins 08-26-39-528| [ X] [ 10.412407] [ 10.412] (==) ModulePath set to "/usr/lib/xorg/modules" 08-26-39-528| [ X] [ 10.412454] [ 10.412] (==) |-->Input Device "Mouse0" 08-26-39-528| [ X] [ 10.412497] [ 10.412] (==) |-->Input Device "" 08-26-39-528| [ X] [ 10.412535] [ 10.412] (==) The core pointer device wasn't specified explicitly in the layout. 08-26-39-528| [ X] [ 10.412543] Using the first mouse device. 08-26-39-528| [ X] [ 10.412577] [ 10.412] (==) The core keyboard device wasn't specified explicitly in the layout. 08-26-39-528| [ X] [ 10.412585] Using the default keyboard configuration. 08-26-39-528| [ X] [ 10.412619] [ 10.412] (II) Loader magic: 0x756720 08-26-39-528| [ X] [ 10.412654] [ 10.412] (II) Module ABI versions: 08-26-39-528| [ X] [ 10.412690] [ 10.412] X.Org ANSI C Emulation: 0.4 08-26-39-528| [ X] [ 10.412725] [ 10.412] X.Org Video Driver: 23.0 08-26-39-528| [ X] [ 10.412760] [ 10.412] X.Org XInput driver : 24.1 08-26-39-528| [ X] [ 10.412796] [ 10.412] X.Org Server Extension : 10.0 08-26-39-528| [ X] [ 10.413477] [ 10.413] (--) using VT number 2 08-26-39-528| [ X] [ 10.413520] [ 10.413] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration 08-26-39-528| [ KERNEL] [ 10.507181] random: Xorg: uninitialized urandom read (16 bytes read) 08-26-39-528| [ X] [ 10.414048] [ 10.414] (II) xfree86: Adding drm device (/dev/dri/card0) 08-26-39-528| [ X] [ 10.424602] [ 10.424] (--) PCI:*(0:0:2:0) 8086:2e12:1028:027f rev 3, Mem @ 0xfe800000/4194304, 0xd0000000/268435456, I/O @ 0x0000ec90/8, BIOS @ 0x????????/131072 08-26-39-528| [ X] [ 10.424693] [ 10.424] (--) PCI: (0:0:2:1) 8086:2e13:1028:027f rev 3, Mem @ 0xfe700000/1048576 08-26-39-528| [ X] [ 10.424811] [ 10.424] (II) LoadModule: "glx" 08-26-39-528| [ X] [ 10.424944] [ 10.424] (WW) Warning, couldn't open module glx 08-26-39-528| [ X] [ 10.425004] [ 10.424] (II) UnloadModule: "glx" 08-26-39-528| [ X] [ 10.425062] [ 10.425] (II) Unloading glx 08-26-39-528| [ X] [ 10.425099] [ 10.425] (EE) Failed to load module "glx" (module does not exist, 0) 08-26-39-528| [ X] [ 10.425152] [ 10.425] (II) LoadModule: "intel" 08-26-39-528| [ X] [ 10.425232] [ 10.425] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so 08-26-39-528| [ X] [ 10.425491] [ 10.425] (II) Module intel: vendor="X.Org Foundation" 08-26-39-528| [ X] [ 10.425542] [ 10.425] compiled for 1.19.5, module version = 2.99.917 08-26-39-528| [ X] [ 10.425578] [ 10.425] Module class: X.Org Video Driver 08-26-39-528| [ X] [ 10.425614] [ 10.425] ABI class: X.Org Video Driver, version 23.0 08-26-39-528| [ X] [ 10.425670] [ 10.425] (II) LoadModule: "evdev" 08-26-39-528| [ X] [ 10.425738] [ 10.425] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so 08-26-39-528| [ X] [ 10.425997] [ 10.425] (II) Module evdev: vendor="X.Org Foundation" 08-26-39-528| [ X] [ 10.426048] [ 10.426] compiled for 1.19.1, module version = 2.10.5 08-26-39-528| [ X] [ 10.426088] [ 10.426] Module class: X.Org XInput Driver 08-26-39-528| [ X] [ 10.426124] [ 10.426] ABI class: X.Org XInput driver, version 24.1 08-26-39-528| [ X] [ 10.426179] [ 10.426] (II) LoadModule: "kbd" 08-26-39-528| [ X] [ 10.426288] [ 10.426] (WW) Warning, couldn't open module kbd 08-26-39-528| [ X] [ 10.426347] [ 10.426] (II) UnloadModule: "kbd" 08-26-39-528| [ X] [ 10.426404] [ 10.426] (II) Unloading kbd 08-26-39-528| [ X] [ 10.426441] [ 10.426] (EE) Failed to load module "kbd" (module does not exist, 0) 08-26-39-528| [ X] [ 10.426478] [ 10.426] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: 08-26-39-528| [ X] [ 10.426824] i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 08-26-39-528| [ X] [ 10.427087] 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, 08-26-39-528| [ X] [ 10.427460] Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, 08-26-39-528| [ X] [ 10.427695] GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 08-26-39-528| [ X] [ 10.427732] [ 10.427] (II) intel: Driver for Intel(R) HD Graphics 08-26-39-528| [ X] [ 10.427768] [ 10.427] (II) intel: Driver for Intel(R) Iris(TM) Graphics 08-26-39-528| [ X] [ 10.427803] [ 10.427] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics 08-26-39-528| [ X] [ 10.442777] [ 10.442] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20180719 08-26-39-528| [ X] [ 10.442791] [ 10.442] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20171229-1 (Timo Aaltonen ) 08-26-39-528| [ X] [ 10.442797] [ 10.442] (II) intel(0): SNA compiled for use with valgrind 08-26-39-528| [ X] [ 10.460840] [ 10.459] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support 08-26-39-528| [ X] [ 10.460859] [ 10.459] (--) intel(0): Integrated Graphics Chipset: Intel(R) Q45/Q43 08-26-39-528| [ X] [ 10.460866] [ 10.459] (--) intel(0): CPU: x86, sse2, sse3, ssse3; using a maximum of 2 threads 08-26-39-528| [ X] [ 10.460872] [ 10.460] (**) intel(0): Depth 24, (--) framebuffer bpp 32 08-26-39-528| [ X] [ 10.460878] [ 10.460] (==) intel(0): RGB weight 888 08-26-39-528| [ X] [ 10.460884] [ 10.460] (==) intel(0): Default visual is TrueColor 08-26-39-528| [ X] [ 10.460890] [ 10.460] (II) intel(0): Output VGA1 using monitor section Monitor0 08-26-39-528| [ X] [ 10.460896] [ 10.460] (**) intel(0): Option "PreferredMode" "1680x1050" 08-26-39-528| [ X] [ 10.460902] [ 10.460] (II) intel(0): Enabled output VGA1 08-26-39-528| [ X] [ 10.460907] [ 10.460] (II) intel(0): Output HDMI1 has no monitor section 08-26-39-528| [ X] [ 10.460913] [ 10.460] (II) intel(0): Enabled output HDMI1 08-26-39-528| [ X] [ 10.460919] [ 10.460] (II) intel(0): Output DP1 has no monitor section 08-26-39-528| [ X] [ 10.460924] [ 10.460] (II) intel(0): Enabled output DP1 08-26-39-528| [ X] [ 10.460930] [ 10.460] (--) intel(0): Using a maximum size of 256x256 for hardware cursors 08-26-39-528| [ X] [ 10.460936] [ 10.460] (II) intel(0): Output VIRTUAL1 has no monitor section 08-26-39-528| [ X] [ 10.460942] [ 10.460] (II) intel(0): Enabled output VIRTUAL1 08-26-39-528| [ X] [ 10.460953] [ 10.460] (II) intel(0): EDID for output DP1 08-26-39-528| [ X] [ 10.462063] [ 10.462] (II) intel(0): EDID for output HDMI1 08-26-39-528| [ X] [ 10.607607] [ 10.607] (II) intel(0): EDID for output VGA1 08-26-39-528| [ X] [ 10.607661] [ 10.607] (II) intel(0): Printing probed modes for output VGA1 08-26-39-528| [ X] [ 10.607705] [ 10.607] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) 08-26-39-528| [ X] [ 10.607748] [ 10.607] (II) intel(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) 08-26-39-528| [ X] [ 10.607789] [ 10.607] (II) intel(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) 08-26-39-528| [ X] [ 10.607831] [ 10.607] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e) 08-26-39-528| [ X] [ 10.607879] [ 10.607] (II) intel(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) 08-26-39-528| [ X] [ 10.607917] [ 10.607] (II) intel(0): EDID for output VIRTUAL1 08-26-39-528| [ X] [ 10.607956] [ 10.607] (II) intel(0): Output DP1 disconnected 08-26-39-528| [ X] [ 10.607993] [ 10.607] (II) intel(0): Output HDMI1 disconnected 08-26-39-528| [ X] [ 10.608030] [ 10.608] (II) intel(0): Output VGA1 connected 08-26-39-528| [ X] [ 10.608067] [ 10.608] (II) intel(0): Output VIRTUAL1 disconnected 08-26-39-528| [ X] [ 10.608108] [ 10.608] (II) intel(0): Using exact sizes for initial modes 08-26-39-528| [ X] [ 10.608146] [ 10.608] (II) intel(0): Output VGA1 using initial mode 1024x768 +0+0 08-26-39-528| [ X] [ 10.608259] [ 10.608] (==) intel(0): TearFree disabled 08-26-39-528| [ X] [ 10.608331] [ 10.608] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) 08-26-39-528| [ X] [ 10.608371] [ 10.608] (==) intel(0): DPI set to (96, 96) 08-26-39-528| [ X] [ 10.608410] [ 10.608] (II) Loading sub module "dri3" 08-26-39-528| [ X] [ 10.608469] [ 10.608] (II) LoadModule: "dri3" 08-26-39-528| [ X] [ 10.608506] [ 10.608] (II) Module "dri3" already built-in 08-26-39-528| [ X] [ 10.608544] [ 10.608] (II) Loading sub module "dri2" 08-26-39-528| [ X] [ 10.608595] [ 10.608] (II) LoadModule: "dri2" 08-26-39-528| [ X] [ 10.608632] [ 10.608] (II) Module "dri2" already built-in 08-26-39-528| [ X] [ 10.608668] [ 10.608] (II) Loading sub module "present" 08-26-39-528| [ X] [ 10.608721] [ 10.608] (II) LoadModule: "present" 08-26-39-528| [ X] [ 10.608758] [ 10.608] (II) Module "present" already built-in 08-26-39-528| [ X] [ 10.608796] [ 10.608] (==) Depth 24 pixmap format is 32 bpp 08-26-39-528| [ X] [ 10.609199] [ 10.609] (II) intel(0): SNA initialized with Eaglelake (gen4.5) backend 08-26-39-528| [ X] [ 10.609245] [ 10.609] (==) intel(0): Backing store enabled 08-26-39-528| [ X] [ 10.609287] [ 10.609] (==) intel(0): Silken mouse enabled 08-26-39-528| [ X] [ 10.609338] [ 10.609] (II) intel(0): HW Cursor enabled 08-26-39-528| [ X] [ 10.609378] [ 10.609] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. 08-26-39-528| [ X] [ 10.609581] [ 10.609] (==) intel(0): DPMS enabled 08-26-39-528| [ X] [ 10.609703] [ 10.609] (==) intel(0): Display hotplug detection enabled 08-26-39-528| [ X] [ 10.609779] [ 10.609] (II) intel(0): [XvMC] xvmc_vld driver initialized. 08-26-39-528| [ X] [ 10.609828] [ 10.609] (II) intel(0): [DRI2] Setup complete 08-26-39-528| [ X] [ 10.609866] [ 10.609] (II) intel(0): [DRI2] DRI driver: i965 08-26-39-528| [ X] [ 10.609903] [ 10.609] (II) intel(0): [DRI2] VDPAU driver: va_gl 08-26-39-528| [ X] [ 10.609944] [ 10.609] (II) intel(0): direct rendering: DRI2 enabled 08-26-39-528| [ X] [ 10.609984] [ 10.609] (II) intel(0): hardware support for Present enabled 08-26-39-528| [ X] [ 10.610023] [ 10.610] (WW) intel(0): Option "PreferredMode" is not used 08-26-39-528| [ X] [ 10.610062] [ 10.610] (--) RandR disabled 08-26-39-528| [ X] [ 10.618043] [ 10.618] (II) SELinux: Disabled on system 08-26-39-528| [ X] [ 10.628567] [ 10.628] (II) intel(0): switch to mode 1024x768@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none 08-26-39-528| [ X] [ 10.640376] [ 10.640] (II) intel(0): Setting screen physical size to 270 x 203 08-26-39-528| [ X] [ 10.640442] [ 10.640] (II) intel(0): resizing framebuffer to 1024x768 08-26-39-528| [ X] [ 10.675564] [ 10.670] (II) Using input driver 'evdev' for 'Mouse0' 08-26-39-528| [ X] [ 10.675583] [ 10.671] (**) Option "SendCoreEvents" "on" 08-26-39-528| [ X] [ 10.675589] [ 10.671] (**) Option "CorePointer" "on" 08-26-39-528| [ X] [ 10.675595] [ 10.671] (**) Mouse0: always reports core events 08-26-39-528| [ X] [ 10.675601] [ 10.671] (**) evdev: Mouse0: Device: "/dev/input/event4" 08-26-39-528| [ X] [ 10.675614] [ 10.671] (--) evdev: Mouse0: Vendor 0x46d Product 0xc050 08-26-39-528| [ X] [ 10.675620] [ 10.671] (--) evdev: Mouse0: Found 12 mouse buttons 08-26-39-528| [ X] [ 10.675626] [ 10.671] (--) evdev: Mouse0: Found scroll wheel(s) 08-26-39-528| [ X] [ 10.675632] [ 10.671] (--) evdev: Mouse0: Found relative axes 08-26-39-528| [ X] [ 10.675638] [ 10.671] (--) evdev: Mouse0: Found x and y relative axes 08-26-39-528| [ X] [ 10.675643] [ 10.671] (II) evdev: Mouse0: Configuring as mouse 08-26-39-528| [ X] [ 10.675650] [ 10.671] (II) evdev: Mouse0: Adding scrollwheel support 08-26-39-528| [ X] [ 10.675656] [ 10.671] (**) evdev: Mouse0: YAxisMapping: buttons 4 and 5 08-26-39-528| [ X] [ 10.675662] [ 10.671] (**) evdev: Mouse0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 08-26-39-528| [ X] [ 10.675668] [ 10.671] (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE, id 6) 08-26-39-528| [ X] [ 10.675673] [ 10.671] (II) evdev: Mouse0: initialized for relative axes. 08-26-39-528| [ X] [ 10.675689] [ 10.671] (**) Mouse0: (accel) keeping acceleration scheme 1 08-26-39-528| [ X] [ 10.675696] [ 10.671] (**) Mouse0: (accel) acceleration profile 0 08-26-39-528| [ X] [ 10.675701] [ 10.671] (**) Mouse0: (accel) acceleration factor: 2.000 08-26-39-528| [ X] [ 10.675707] [ 10.671] (**) Mouse0: (accel) acceleration threshold: 4 08-26-39-528| [ X] [ 10.675713] [ 10.671] (II) Using input driver 'evdev' for 'Keyboard0' 08-26-39-528| [ X] [ 10.675719] [ 10.671] (**) Option "SendCoreEvents" "on" 08-26-39-528| [ X] [ 10.675725] [ 10.671] (**) Keyboard0: always reports core events 08-26-39-528| [ X] [ 10.675730] [ 10.671] (**) evdev: Keyboard0: Device: "/dev/input/event3" 08-26-39-528| [ X] [ 10.675736] [ 10.671] (--) evdev: Keyboard0: Vendor 0x413c Product 0x2101 08-26-39-528| [ X] [ 10.675741] [ 10.671] (--) evdev: Keyboard0: Found keys 08-26-39-528| [ X] [ 10.675747] [ 10.671] (II) evdev: Keyboard0: Configuring as keyboard 08-26-39-528| [ X] [ 10.675753] [ 10.671] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD, id 7) 08-26-39-528| [ X] [ 10.675758] [ 10.671] (**) Option "xkb_rules" "evdev" 08-26-39-528| [ X] [ 10.675764] [ 10.671] (**) Option "xkb_layout" "us" 08-26-39-528| [ X] [ 10.697885] [ 10.697] (II) Using input driver 'evdev' for 'Keyboard1' 08-26-39-528| [ X] [ 10.697902] [ 10.697] (**) Option "SendCoreEvents" "on" 08-26-39-528| [ X] [ 10.697909] [ 10.697] (**) Keyboard1: always reports core events 08-26-39-528| [ X] [ 10.697914] [ 10.697] (**) evdev: Keyboard1: Device: "/dev/input/event1" 08-26-39-528| [ X] [ 10.697920] [ 10.697] (--) evdev: Keyboard1: Vendor 0 Product 0x1 08-26-39-528| [ X] [ 10.697926] [ 10.697] (--) evdev: Keyboard1: Found keys 08-26-39-528| [ X] [ 10.697932] [ 10.697] (II) evdev: Keyboard1: Configuring as keyboard 08-26-39-528| [ X] [ 10.697938] [ 10.697] (II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD, id 8) 08-26-39-528| [ X] [ 10.697944] [ 10.697] (**) Option "xkb_rules" "evdev" 08-26-39-528| [ X] [ 10.697949] [ 10.697] (**) Option "xkb_layout" "us" 08-26-39-528| [ X] [ 10.697955] [ 10.697] (II) Using input driver 'evdev' for 'Keyboard2' 08-26-39-528| [ X] [ 10.697961] [ 10.697] (**) Option "SendCoreEvents" "on" 08-26-39-528| [ X] [ 10.697967] [ 10.697] (**) Keyboard2: always reports core events 08-26-39-528| [ X] [ 10.697972] [ 10.697] (**) evdev: Keyboard2: Device: "/dev/input/event0" 08-26-39-528| [ X] [ 10.697978] [ 10.697] (--) evdev: Keyboard2: Vendor 0 Product 0x1 08-26-39-528| [ X] [ 10.697984] [ 10.697] (--) evdev: Keyboard2: Found keys 08-26-39-528| [ X] [ 10.697989] [ 10.697] (II) evdev: Keyboard2: Configuring as keyboard 08-26-39-528| [ X] [ 10.698009] [ 10.697] (II) XINPUT: Adding extended input device "Keyboard2" (type: KEYBOARD, id 9) 08-26-39-528| [ X] [ 10.698016] [ 10.697] (**) Option "xkb_rules" "evdev" 08-26-39-528| [ X] [ 10.698022] [ 10.697] (**) Option "xkb_layout" "us" 08-26-39-528| [ X] [ 10.698030] [ 10.697] (II) Using input driver 'evdev' for 'Mouse0' 08-26-39-528| [ X] [ 10.698036] [ 10.697] (**) Option "SendCoreEvents" "on" 08-26-39-528| [ X] [ 10.698042] [ 10.697] (**) Option "CorePointer" "on" 08-26-39-528| [ X] [ 10.698048] [ 10.697] (**) Mouse0: always reports core events 08-26-39-528| [ X] [ 10.698053] [ 10.697] (**) evdev: Mouse0: Device: "/dev/input/event4" 08-26-39-528| [ X] [ 10.698059] [ 10.697] (WW) evdev: Mouse0: device file is duplicate. Ignoring. 08-26-39-528| [ X] [ 10.715559] [ 10.711] (EE) PreInit returned 8 for "Mouse0" 08-26-39-528| [ X] [ 10.715573] [ 10.711] (II) UnloadModule: "evdev" 08-26-39-528| [ X] [ 10.715580] [ 10.711] (II) LoadModule: "kbd" 08-26-39-528| [ X] [ 10.715586] [ 10.711] (WW) Warning, couldn't open module kbd 08-26-39-528| [ X] [ 10.715591] [ 10.711] (II) UnloadModule: "kbd" 08-26-39-528| [ X] [ 10.715597] [ 10.711] (II) Unloading kbd 08-26-39-528| [ X] [ 10.715603] [ 10.711] (EE) Failed to load module "kbd" (module does not exist, 0) 08-26-39-528| [ X] [ 10.715608] [ 10.711] (EE) No input driver matching `kbd' 08-26-39-528| [ X] [ 10.715614] [ 10.711] (II) Falling back to input driver `libinput' 08-26-39-528| [ X] [ 10.715620] [ 10.711] (II) LoadModule: "libinput" 08-26-39-528| [ X] [ 10.715625] [ 10.711] (WW) Warning, couldn't open module libinput 08-26-39-528| [ X] [ 10.715631] [ 10.711] (II) UnloadModule: "libinput" 08-26-39-528| [ X] [ 10.715637] [ 10.711] (II) Unloading libinput 08-26-39-528| [ X] [ 10.715642] [ 10.711] (EE) Failed to load module "libinput" (module does not exist, 0) 08-26-39-528| [ KERNEL] [ 10.809634] urandom_read: 1 callbacks suppressed 08-26-39-528| [ KERNEL] [ 10.809635] random: Xorg: uninitialized urandom read (16 bytes read) 08-26-39-528| [ KERNEL] [ 10.809878] random: Xorg: uninitialized urandom read (16 bytes read) 08-26-39-528| [ KERNEL] [ 10.810153] random: Xorg: uninitialized urandom read (16 bytes read) 08-26-39-528| [ gm] [ 15.512539] RANDR 1.5. 08-26-39-528| [ gm] [ 15.512647] DP1: no display found. 08-26-39-528| [ gm] [ 15.512684] HDMI1: no display found. 08-26-39-528| [ gm] [ 15.512719] VGA1: no display found. 08-26-39-528| [ gm] [ 15.512761] VIRTUAL1: no display found. 08-26-39-528| [ gm] [ 15.512778] Got 1024x768 instead of 1680x1050. 08-26-39-528| [ gm] [ 15.512793] Find mode 1680x1050@60Hz in table. 08-26-39-528| [ gm] [ 15.512881] Mode 0x00000047: "1024x768" 65000000 1024 1048 1184 1344 768 771 777 806 flags: 0x0000000a 08-26-39-528| [ gm] [ 15.512899] Mode 0x00000048: "800x600" 40000000 800 840 968 1056 600 601 605 628 flags: 0x00000005 08-26-39-528| [ gm] [ 15.512913] Mode 0x00000049: "800x600" 36000000 800 824 896 1024 600 601 603 625 flags: 0x00000005 08-26-39-528| [ gm] [ 15.512927] Mode 0x0000004a: "848x480" 33750000 848 864 976 1088 480 486 494 517 flags: 0x00000005 08-26-39-528| [ gm] [ 15.512941] Mode 0x0000004b: "640x480" 25175000 640 656 752 800 480 490 492 525 flags: 0x0000000a 08-26-39-528| [ gm] [ 15.512955] Mode 0x0000006e: "1680x1050" 146250000 1680 1784 1960 2240 1050 1053 1059 1089 flags: 0x00000006 08-26-39-528| [ gm] [ 15.512969] Found! RRMode 0x0000006e. 08-26-39-528| [ X] [ 15.513053] [ 15.513] (II) intel(0): Output VIRTUAL2 has no monitor section 08-26-39-528| [ X] [ 15.513071] [ 15.513] (II) intel(0): Enabled output VIRTUAL2 08-26-39-528| [ gm] [ 15.513245] sizes [0]: 1024x768, mm: 270x203. 08-26-39-528| [ gm] [ 15.513262] sizes [1]: 800x600, mm: 270x203. 08-26-39-528| [ gm] [ 15.513276] sizes [2]: 848x480, mm: 270x203. 08-26-39-528| [ gm] [ 15.513290] sizes [3]: 640x480, mm: 270x203. 08-26-39-528| [ gm] [ 15.513303] sizes [4]: 1680x1050, mm: 270x203. 08-26-39-528| [ gm] [ 15.513317] New size 4. 08-26-39-528| [ X] [ 15.539807] [ 15.539] (II) intel(0): resizing framebuffer to 1680x1050 08-26-39-528| [ X] [ 15.539875] [ 15.539] (II) intel(0): switch to mode 1680x1050@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none 08-26-39-528| [ gm] [ 15.576213] RRScreenChangeNotify, size_index = 0. 08-26-39-528| [ gm] [ 15.576238] RRScreenChangeNotify, size_index = 0. 08-26-39-528| [ gm] [ 15.576253] RRScreenChangeNotify, size_index = 65535. 08-26-39-528| [ gm] [ 15.576266] ConfigureNotify 08-26-39-528| [ gm] [ 15.576280] RRScreenChangeNotify, size_index = 65535. 08-26-39-528| [ gm] [ 15.576294] ConfigureNotify 08-26-39-528| [ gm] [ 15.576308] RRScreenChangeNotify, size_index = 4. 08-26-39-528| [ gm] [ 15.576321] Mode changed. 08-26-39-528| [ gm] [ 15.603457] Disable DPMS. 08-26-39-528| [ gm] [ 15.603707] Allocate 81920 bytes of shared memory for X imgbuf. 08-26-39-528| [ gm] [ 15.604157] Use /lib/ui32.so. 08-26-39-528| [ gm] [ 15.604175] [HTTP] Download config file /wtware/Graphic/sample/menu.png from 192.168.2.99. 08-26-39-528| [ gm] [ 15.611521] [HTTP] Download config file /wtware/Graphic/sample/popup.png from 192.168.2.99. 08-26-39-528| [ gm] [ 15.612919] [HTTP] Download config file /wtware/Graphic/sample/saver.png from 192.168.2.99. 08-26-39-528| [ gm] [ 15.620077] [HTTP] Download config file /wtware/Graphic/sample/wait.png from 192.168.2.99. 08-26-39-528| [ gm] [ 15.627266] Allocate 6787200 bytes of shared memory for X imgbuf. 08-26-39-528| [ gm] [ 15.685904] Unpack /bootmedia/packages/sc. 08-26-39-528| [ gm] [ 15.787178] Run scard daemon. Supported cards: 08-26-39-528| [ gm] [ 15.787224] ACR122 (072f:2200). 08-26-39-528| [ gm] [ 15.787247] Dell Keyboard (413c:2101). 08-26-39-528| [ gm] [ 15.789595] Run '/sbin/rdpdr[scard] 0', log '/tmp/rdpdr[scard].out', env '', pid ''. 08-26-39-528| [ pfac] [ 15.789711] Run /sbin/rdpdr[scard] 0. 08-26-39-528| [ pfac] [ 15.789727] Ok, PID 940. 08-26-39-528| [ rdpdr-scard] [ 15.790258] RDP Smart Card Redirector, WTware 5.8.40. 08-26-39-528| [ rdpdr-scard] [ 15.790698] Load /usr/lib/pcsc/drivers/ifd-ccid.bundle/Contents/Linux/libccid.so library. 08-26-39-528| [ hpsc] [ 15.794243] [HPSC] Dell keyboard. 08-26-39-528| [ hpsc] [ 15.794264] [HPSC] rdpdr[scard] isn't running now. 08-26-39-528| [ gm] [ 15.814425] Run '/sbin/resolver 0xd91380 dns [192.168.2.99]', log '', env '', pid ''. 08-26-39-528| [ gm] [ 15.814469] Nobody can control terminal by VNC. 08-26-39-528| [ gm] [ 15.814484] Unknown event 89. 08-26-39-528| [ pfac] [ 15.814636] Run /sbin/resolver 0xd91380 dns [192.168.2.99]. 08-26-39-528| [ pfac] [ 15.814655] Ok, PID 943. 08-26-39-528| [ pfac] [ 15.815677] Process pid 943 terminated, status 00000000. 08-26-39-528| [ gm] [ 15.818947] 192.168.2.99 => 192.168.2.99. 08-26-39-528| [ gm] [ 15.843730] Free ram before fork terminal client /sbin/rdpclient-SSE (session 1): 3261380 Kb. 08-26-39-528| [ gm] [ 15.843776] Run '/sbin/rdpclient-SSE 1', log '/tmp/rdpclient.out', env '', pid ''. 08-26-39-528| [ pfac] [ 15.843904] Run /sbin/rdpclient-SSE 1. 08-26-39-528| [ pfac] [ 15.843921] Ok, PID 944. 08-26-39-528| [ rdpclient 944] [ 15.845231] RDP Terminal Client, WTware 5.8.40, pipe 1, pid 944. 08-26-39-528| [ rdpclient 944] [ 15.847810] Use /lib/ui32-SSE.so. 08-26-39-528| [ rdpclient 944] [ 15.848083] Add smartcard redirection. 08-26-39-528| [ rdpdr-scard] [ 15.848167] New client connection, id 1. 08-26-39-528| [ rdpclient 944] [ 15.848178] Make RDP session with 192.168.2.99, port 3389. 08-26-39-528| [ rdpclient 944] [ 15.848201] No username. 08-26-39-528| [ rdpclient 944] [ 15.848232] No password. 08-26-39-528| [ rdpclient 944] [ 15.848256] No PIN. 08-26-39-528| [ rdpclient 944] [ 15.848279] Domain: "eskulap.local". 08-26-39-528| [ rdpclient 944] [ 15.848303] No shell. 08-26-39-528| [ rdpclient 944] [ 15.848325] No directory. 08-26-39-528| [ rdpclient 944] [ 15.848358] Window: 1616x1050@24. 08-26-39-528| [ rdpclient 944] [ 15.848382] PFlags 0x00000180. 08-26-39-528| [ rdpclient 944] [ 15.848405] Keyboard 00000415:00000000. 08-26-39-528| [ rdpclient 944] [ 15.848429] My hostname "TERMINAL-TEST-6". 08-26-39-528| [ rdpclient 944] [ 15.848453] TCP: connecting to 192.168.2.99:3389. 08-26-39-528| [ rdpclient 944] [ 15.848912] TCP: connection with 192.168.2.99:3389 established. 08-26-39-528| [ rdpclient 944] [ 15.848946] Turn keepalive on. 08-26-39-528| [ rdpclient 944] [ 15.849421] Free ram after buffers allocation: 3261380 KB. 08-26-39-528| [ rdpclient 944] [ 15.853043] Server supports GFX Pipeline. 08-26-39-528| [ rdpclient 944] [ 15.854280] Process RDP server certificate. 08-26-39-528| [ rdpclient 944] [ 15.854330] RDP5 encryption (X.509). 08-26-39-528| [ rdpclient 944] [ 15.857041] Enable font smoothing and Desktop Composition. 08-26-39-528| [ rdpclient 944] [ 15.913465] GFX codec. 08-26-39-528| [ rdpdr-scard] [ 16.135719] Reset client 1. 08-26-39-528| [ rdpclient 944] [ 16.253288] Run 2 tile threads. 08-26-39-528| [ rdpdr-scard] [ 24.475602] Smartcard present. 08-26-39-528| [ rdpdr-scard] [ 24.607042] rdpdr[scard]-worker.cpp ( 1180): -- ERROR -- Unknown reader attribute 0007a007. 08-26-39-528| [ rdpdr-scard] [ 24.607078] rdpdr[scard]-worker.cpp ( 1181): -- ERROR -- SCARD_E_INVALID_VALUE, invalid parameter. 08-26-39-528| [ rdpdr-scard] [ 24.695206] rdpdr[scard]-worker.cpp ( 1180): -- ERROR -- Unknown reader attribute 0007a007. 08-26-39-528| [ rdpdr-scard] [ 24.695243] rdpdr[scard]-worker.cpp ( 1181): -- ERROR -- SCARD_E_INVALID_VALUE, invalid parameter. 08-26-39-528| [ rdpdr-scard] [ 24.766341] rdpdr[scard]-worker.cpp ( 1180): -- ERROR -- Unknown reader attribute 0007a007. 08-26-39-528| [ rdpdr-scard] [ 24.766379] rdpdr[scard]-worker.cpp ( 1181): -- ERROR -- SCARD_E_INVALID_VALUE, invalid parameter. 08-26-39-528| [ rdpdr-scard] [ 24.865256] rdpdr[scard]-worker.cpp ( 1180): -- ERROR -- Unknown reader attribute 0007a007. 08-26-39-528| [ rdpdr-scard] [ 24.865304] rdpdr[scard]-worker.cpp ( 1181): -- ERROR -- SCARD_E_INVALID_VALUE, invalid parameter. 08-26-39-529| Connection from wtc.exe at 192.168.2.99. 08-26-42-443| [ rdpdr-scard] [ 38.011611] Smartcard not present.