WTware 5.8.40 supervisor. [ KERNEL] [ 0.000000] Linux version 4.19.8 (aka@c20) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #3 SMP Sat Dec 8 23:42:58 UTC 2018 [ KERNEL] [ 0.000000] KERNEL supported cpus: [ KERNEL] [ 0.000000] Intel GenuineIntel [ KERNEL] [ 0.000000] AMD AuthenticAMD [ KERNEL] [ 0.000000] NSC Geode by NSC [ KERNEL] [ 0.000000] Cyrix CyrixInstead [ KERNEL] [ 0.000000] Centaur CentaurHauls [ KERNEL] [ 0.000000] Transmeta GenuineTMx86 [ KERNEL] [ 0.000000] Transmeta TransmetaCPU [ KERNEL] [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ KERNEL] [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ KERNEL] [ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format. [ KERNEL] [ 0.000000] BIOS-provided physical RAM map: [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000749f7fff] usable [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000749f8000-0x0000000074f9cfff] reserved [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x0000000074f9d000-0x0000000074facfff] ACPI data [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x0000000074fad000-0x00000000750b8fff] ACPI NVS [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000750b9000-0x000000007551efff] reserved [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x000000007551f000-0x000000007551ffff] usable [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x0000000075520000-0x0000000075562fff] ACPI NVS [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x0000000075563000-0x0000000075d8bfff] usable [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x0000000075d8c000-0x0000000075ff0fff] reserved [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x0000000075ff1000-0x0000000075ffffff] usable [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x0000000076800000-0x000000007e9fffff] reserved [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ KERNEL] [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001005fffff] usable [ KERNEL] [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ KERNEL] [ 0.000000] SMBIOS 2.7 present. [ KERNEL] [ 0.000000] DMI: LENOVO INVALID /ChiefRiver, BIOS FDKT12AUS 11/15/2012 [ KERNEL] [ 0.000000] tsc: Fast TSC calibration using PIT [ KERNEL] [ 0.000000] tsc: Detected 1496.748 MHz processor [ KERNEL] [ 0.004148] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ KERNEL] [ 0.004152] e820: remove [mem 0x000a0000-0x000fffff] usable [ KERNEL] [ 0.004170] last_pfn = 0x76000 max_arch_pfn = 0x100000 [ KERNEL] [ 0.004177] MTRR default type: uncachable [ KERNEL] [ 0.004179] MTRR fixed ranges enabled: [ KERNEL] [ 0.004180] 00000-9FFFF write-back [ KERNEL] [ 0.004182] A0000-BFFFF uncachable [ KERNEL] [ 0.004183] C0000-D7FFF write-protect [ KERNEL] [ 0.004184] D8000-E7FFF uncachable [ KERNEL] [ 0.004185] E8000-FFFFF write-protect [ KERNEL] [ 0.004186] MTRR variable ranges enabled: [ KERNEL] [ 0.004188] 0 base 000000000 mask F00000000 write-back [ KERNEL] [ 0.004189] 1 base 100000000 mask FFFC00000 write-back [ KERNEL] [ 0.004191] 2 base 100400000 mask FFFE00000 write-back [ KERNEL] [ 0.004192] 3 base 080000000 mask F80000000 uncachable [ KERNEL] [ 0.004193] 4 base 078000000 mask FF8000000 uncachable [ KERNEL] [ 0.004194] 5 base 077000000 mask FFF000000 uncachable [ KERNEL] [ 0.004196] 6 base 076800000 mask FFF800000 uncachable [ KERNEL] [ 0.004196] 7 disabled [ KERNEL] [ 0.004197] 8 disabled [ KERNEL] [ 0.004198] 9 disabled [ KERNEL] [ 0.005420] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ KERNEL] [ 0.005593] total RAM covered: 1902M [ KERNEL] [ 0.006331] Found optimal setting for mtrr clean up [ KERNEL] [ 0.006333] gran_size: 64K chunk_size: 256M num_reg: 6 lose cover RAM: 0G [ KERNEL] [ 0.007437] e820: update [mem 0x76800000-0xffffffff] usable ==> reserved [ KERNEL] [ 0.017246] found SMP MP-table at [mem 0x000fd740-0x000fd74f] mapped at [(ptrval)] [ KERNEL] [ 0.017263] initial memory mapped: [mem 0x00000000-0x01bfffff] [ KERNEL] [ 0.017267] Base memory trampoline at [(ptrval)] 99000 size 16384 [ KERNEL] [ 0.017270] reserving inaccessible SNB gfx pages [ KERNEL] [ 0.017318] BRK [0x019d9000, 0x019d9fff] PGTABLE [ KERNEL] [ 0.017338] BRK [0x019da000, 0x019dafff] PGTABLE [ KERNEL] [ 0.017368] ACPI: Early table checksum verification disabled [ KERNEL] [ 0.026580] ACPI: RSDP 0x00000000000F0490 000024 (v02 LENOVO) [ KERNEL] [ 0.026585] ACPI: XSDT 0x0000000074FA1078 000074 (v01 LENOVO TC-FD 000010C0 AMI 00010013) [ KERNEL] [ 0.026593] ACPI: FACP 0x0000000074FAAD58 00010C (v05 LENOVO TC-FD 000010C0 AMI 00010013) [ KERNEL] [ 0.026601] ACPI: DSDT 0x0000000074FA1180 009BD8 (v02 LENOVO TC-FD 000010C0 INTL 20051117) [ KERNEL] [ 0.026606] ACPI: FACS 0x00000000750B7080 000040 [ KERNEL] [ 0.026609] ACPI: APIC 0x0000000074FAAE68 000062 (v03 LENOVO TC-FD 000010C0 AMI 00010013) [ KERNEL] [ 0.026614] ACPI: FPDT 0x0000000074FAAED0 000044 (v01 LENOVO TC-FD 000010C0 AMI 00010013) [ KERNEL] [ 0.026618] ACPI: ASF! 0x0000000074FAAF18 0000A5 (v32 LENOVO TC-FD 000010C0 TFSM 000F4240) [ KERNEL] [ 0.026623] ACPI: MCFG 0x0000000074FAAFC0 00003C (v01 LENOVO TC-FD 000010C0 MSFT 00000097) [ KERNEL] [ 0.026628] ACPI: HPET 0x0000000074FAB000 000038 (v01 LENOVO TC-FD 000010C0 AMI. 00000005) [ KERNEL] [ 0.026632] ACPI: SSDT 0x0000000074FAB038 000315 (v01 LENOVO TC-FD 000010C0 INTL 20091112) [ KERNEL] [ 0.026637] ACPI: SSDT 0x0000000074FAB350 00079A (v01 LENOVO TC-FD 000010C0 INTL 20051117) [ KERNEL] [ 0.026641] ACPI: SSDT 0x0000000074FABAF0 000A92 (v01 LENOVO TC-FD 000010C0 INTL 20051117) [ KERNEL] [ 0.026646] ACPI: BGRT 0x0000000074FAC588 000038 (v00 LENOVO TC-FD 000010C0 AMI 00010013) [ KERNEL] [ 0.026660] ACPI: Local APIC address 0xfee00000 [ KERNEL] [ 0.026664] 1004MB HIGHMEM available. [ KERNEL] [ 0.026666] 883MB LOWMEM available. [ KERNEL] [ 0.026667] mapped low ram: 0 - 373fe000 [ KERNEL] [ 0.026668] low ram: 0 - 373fe000 [ KERNEL] [ 0.026669] BRK [0x019db000, 0x019dbfff] PGTABLE [ KERNEL] [ 0.026673] Zone ranges: [ KERNEL] [ 0.026674] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ KERNEL] [ 0.026676] Normal [mem 0x0000000001000000-0x00000000373fdfff] [ KERNEL] [ 0.026678] HighMem [mem 0x00000000373fe000-0x0000000075ffffff] [ KERNEL] [ 0.026679] Movable zone start for each node [ KERNEL] [ 0.026680] Early memory node ranges [ KERNEL] [ 0.026681] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ KERNEL] [ 0.026683] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ KERNEL] [ 0.026684] node 0: [mem 0x0000000020200000-0x000000003fffffff] [ KERNEL] [ 0.026685] node 0: [mem 0x0000000040200000-0x00000000749f7fff] [ KERNEL] [ 0.026686] node 0: [mem 0x000000007551f000-0x000000007551ffff] [ KERNEL] [ 0.026687] node 0: [mem 0x0000000075563000-0x0000000075d8bfff] [ KERNEL] [ 0.026688] node 0: [mem 0x0000000075ff1000-0x0000000075ffffff] [ KERNEL] [ 0.026690] Initmem setup node 0 [mem 0x0000000000001000-0x0000000075ffffff] [ KERNEL] [ 0.026693] On node 0 totalpages: 478669 [ KERNEL] [ 0.029541] DMA zone: 32 pages used for memmap [ KERNEL] [ 0.029544] DMA zone: 0 pages reserved [ KERNEL] [ 0.029545] DMA zone: 3996 pages, LIFO batch:0 [ KERNEL] [ 0.029655] Normal zone: 1736 pages used for memmap [ KERNEL] [ 0.029656] Normal zone: 221694 pages, LIFO batch:63 [ KERNEL] [ 0.035330] HighMem zone: 252979 pages, LIFO batch:63 [ KERNEL] [ 0.041896] Using APIC driver default [ KERNEL] [ 0.041908] Reserving Intel graphics memory at [mem 0x76a00000-0x7e9fffff] [ KERNEL] [ 0.042020] ACPI: PM-Timer IO Port: 0x408 [ KERNEL] [ 0.042023] ACPI: Local APIC address 0xfee00000 [ KERNEL] [ 0.042030] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ KERNEL] [ 0.042042] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ KERNEL] [ 0.042045] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ KERNEL] [ 0.042048] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ KERNEL] [ 0.042049] ACPI: IRQ0 used by override. [ KERNEL] [ 0.042052] ACPI: IRQ9 used by override. [ KERNEL] [ 0.042056] Using ACPI (MADT) for SMP configuration information [ KERNEL] [ 0.042058] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ KERNEL] [ 0.042064] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ KERNEL] [ 0.042073] [mem 0x7ea00000-0xf7ffffff] available for PCI devices [ KERNEL] [ 0.042074] Booting paravirtualized kernel on bare hardware [ KERNEL] [ 0.042078] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ KERNEL] [ 0.042084] random: get_random_bytes called from 0xc15a27d0 with crng_init=0 [ KERNEL] [ 0.042092] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1 [ KERNEL] [ 0.042170] percpu: Embedded 27 pages/cpu @(ptrval) s78732 r0 d31860 u110592 [ KERNEL] [ 0.042176] pcpu-alloc: s78732 r0 d31860 u110592 alloc=27*4096 [ KERNEL] [ 0.042178] pcpu-alloc: [0] 0 [0] 1 [ KERNEL] [ 0.042196] Built 1 zonelists, mobility grouping on. Total pages: 476901 [ KERNEL] [ 0.042198] Kernel command line: wtboot=usb1 quiet BOOT_IMAGE=packages/kernel [ KERNEL] [ 0.042380] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ KERNEL] [ 0.042443] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ KERNEL] [ 0.042465] Initializing CPU#0 [ KERNEL] [ 0.042473] Initializing HighMem for node 0 (000373fe:00076000) [ KERNEL] [ 0.090633] Initializing Movable for node 0 (00000000:00000000) [ KERNEL] [ 0.094312] Memory: 1887848K/1914676K available (4654K kernel code, 201K rwdata, 860K rodata, 3976K init, 288K bss, 26828K reserved, 0K cma-reserved, 1011916K highmem) [ KERNEL] [ 0.094320] virtual kernel memory layout: [ KERNEL] [ 0.094320] fixmap : 0xfff65000 - 0xfffff000 ( 616 kB) [ KERNEL] [ 0.094320] cpu_entry : 0xffc00000 - 0xffc9d000 ( 628 kB) [ KERNEL] [ 0.094320] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ KERNEL] [ 0.094320] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) [ KERNEL] [ 0.094320] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) [ KERNEL] [ 0.094320] .init : 0xc15a2000 - 0xc1984000 (3976 kB) [ KERNEL] [ 0.094320] .data : 0xc148b805 - 0xc15986c0 (1075 kB) [ KERNEL] [ 0.094320] .text : 0xc1000000 - 0xc148b805 (4654 kB) [ KERNEL] [ 0.094321] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ KERNEL] [ 0.094399] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ KERNEL] [ 0.094447] rcu: Hierarchical RCU implementation. [ KERNEL] [ 0.094448] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ KERNEL] [ 0.094450] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ KERNEL] [ 0.094463] NR_IRQS: 2304, nr_irqs: 440, preallocated irqs: 16 [ KERNEL] [ 0.094642] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval) [ KERNEL] [ 0.096758] Console: colour VGA+ 80x25 [ KERNEL] [ 0.096764] console [tty0] enabled [ KERNEL] [ 0.096770] ACPI: Core revision 20180810 [ KERNEL] [ 0.097046] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ KERNEL] [ 0.097058] hpet clockevent registered [ KERNEL] [ 0.097065] APIC: Switch to symmetric I/O mode setup [ KERNEL] [ 0.097066] Enabling APIC mode: Flat. Using 1 I/O APICs [ KERNEL] [ 0.097509] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ KERNEL] [ 0.117063] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x15932296e28, max_idle_ns: 440795227602 ns [ KERNEL] [ 0.117078] Calibrating delay loop (skipped), value calculated using timer frequency.. 2993.49 BogoMIPS (lpj=5986992) [ KERNEL] [ 0.117082] pid_max: default: 32768 minimum: 301 [ KERNEL] [ 0.117116] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ KERNEL] [ 0.117119] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ KERNEL] [ 0.117325] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ KERNEL] [ 0.117326] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ KERNEL] [ 0.117331] mce: CPU supports 6 MCE banks [ KERNEL] [ 0.117341] CPU0: Thermal monitoring enabled (TM1) [ KERNEL] [ 0.117352] process: using mwait in idle threads [ KERNEL] [ 0.117358] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ KERNEL] [ 0.117360] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ KERNEL] [ 0.117362] Spectre V2 : Spectre mitigation: kernel not compiled with retpoline; no mitigation available! [ KERNEL] [ 0.117363] Speculative Store Bypass: Vulnerable [ KERNEL] [ 0.117364] L1TF: Kernel not compiled for PAE. No mitigation for L1TF [ KERNEL] [ 0.117569] Freeing SMP alternatives memory: 20K [ KERNEL] [ 0.118798] TSC deadline timer enabled [ KERNEL] [ 0.118803] smpboot: CPU0: Intel(R) Celeron(R) CPU 807 @ 1.50GHz (family: 0x6, model: 0x2a, stepping: 0x7) [ KERNEL] [ 0.118911] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ KERNEL] [ 0.118944] ... version: 3 [ KERNEL] [ 0.118944] ... bit width: 48 [ KERNEL] [ 0.118945] ... generic registers: 4 [ KERNEL] [ 0.118947] ... value mask: 0000ffffffffffff [ KERNEL] [ 0.118948] ... max period: 00007fffffffffff [ KERNEL] [ 0.118948] ... fixed-purpose events: 3 [ KERNEL] [ 0.118949] ... event mask: 000000070000000f [ KERNEL] [ 0.118994] rcu: Hierarchical SRCU implementation. [ KERNEL] [ 0.119110] smp: Bringing up secondary CPUs ... [ KERNEL] [ 0.119190] CPU 1 irqstacks, hard=(ptrval) soft=(ptrval) [ KERNEL] [ 0.119191] x86: Booting SMP configuration: [ KERNEL] [ 0.119192] .... node #0, CPUs: #1 [ KERNEL] [ 0.006395] Initializing CPU#1 [ KERNEL] [ 0.119744] smp: Brought up 1 node, 2 CPUs [ KERNEL] [ 0.119744] smpboot: Max logical packages: 1 [ KERNEL] [ 0.119744] smpboot: Total of 2 processors activated (5986.99 BogoMIPS) [ KERNEL] [ 0.119744] devtmpfs: initialized [ KERNEL] [ 0.119744] PM: Registering ACPI NVS region [mem 0x74fad000-0x750b8fff] (1097728 bytes) [ KERNEL] [ 0.119744] PM: Registering ACPI NVS region [mem 0x75520000-0x75562fff] (274432 bytes) [ KERNEL] [ 0.119744] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ KERNEL] [ 0.119744] futex hash table entries: 512 (order: 3, 32768 bytes) [ KERNEL] [ 0.119744] NET: Registered protocol family 16 [ KERNEL] [ 0.121196] cpuidle: using governor ladder [ KERNEL] [ 0.121212] cpuidle: using governor menu [ KERNEL] [ 0.121212] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ KERNEL] [ 0.121212] ACPI: bus type PCI registered [ KERNEL] [ 0.121218] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ KERNEL] [ 0.121222] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ KERNEL] [ 0.121224] PCI: Using MMCONFIG for extended config space [ KERNEL] [ 0.121225] PCI: Using configuration type 1 for base access [ KERNEL] [ 0.121269] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ KERNEL] [ 0.125081] ACPI: Added _OSI(Module Device) [ KERNEL] [ 0.125084] ACPI: Added _OSI(Processor Device) [ KERNEL] [ 0.125085] ACPI: Added _OSI(3.0 _SCP Extensions) [ KERNEL] [ 0.125087] ACPI: Added _OSI(Processor Aggregator Device) [ KERNEL] [ 0.125089] ACPI: Added _OSI(Linux-Dell-Video) [ KERNEL] [ 0.125091] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ KERNEL] [ 0.134758] ACPI: 4 ACPI AML tables successfully acquired and loaded [ KERNEL] [ 0.137986] ACPI: Dynamic OEM Table Load: [ KERNEL] [ 0.137986] ACPI: SSDT 0x00000000F615C000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ KERNEL] [ 0.138332] ACPI: Dynamic OEM Table Load: [ KERNEL] [ 0.138338] ACPI: SSDT 0x00000000F6145400 000303 (v01 PmRef ApIst 00003000 INTL 20051117) [ KERNEL] [ 0.138713] ACPI: Dynamic OEM Table Load: [ KERNEL] [ 0.138718] ACPI: SSDT 0x00000000F6143400 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ KERNEL] [ 0.139690] ACPI: Interpreter enabled [ KERNEL] [ 0.139722] ACPI: (supports S0 S1 S3 S5) [ KERNEL] [ 0.139724] ACPI: Using IOAPIC for interrupt routing [ KERNEL] [ 0.139774] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ KERNEL] [ 0.140247] ACPI: Enabled 17 GPEs in block 00 to 3F [ KERNEL] [ 0.155067] ACPI: Power Resource [FN00] (off) [ KERNEL] [ 0.155232] ACPI: Power Resource [FN01] (off) [ KERNEL] [ 0.155395] ACPI: Power Resource [FN02] (off) [ KERNEL] [ 0.155554] ACPI: Power Resource [FN03] (off) [ KERNEL] [ 0.155714] ACPI: Power Resource [FN04] (off) [ KERNEL] [ 0.157078] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ KERNEL] [ 0.157078] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ KERNEL] [ 0.157179] acpi PNP0A08:00: _OSC: platform does not support [PME] [ KERNEL] [ 0.157416] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR] [ KERNEL] [ 0.157418] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ KERNEL] [ 0.157881] PCI host bridge to bus 0000:00 [ KERNEL] [ 0.157886] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ KERNEL] [ 0.157889] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ KERNEL] [ 0.157892] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ KERNEL] [ 0.157896] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ KERNEL] [ 0.157899] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ KERNEL] [ 0.157902] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ KERNEL] [ 0.157905] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ KERNEL] [ 0.157908] pci_bus 0000:00: root bus resource [mem 0x7ea00000-0xfeafffff window] [ KERNEL] [ 0.157912] pci_bus 0000:00: root bus resource [bus 00-3e] [ KERNEL] [ 0.157925] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ KERNEL] [ 0.158095] pci 0000:00:02.0: [8086:0106] type 00 class 0x030000 [ KERNEL] [ 0.158114] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit] [ KERNEL] [ 0.158122] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ KERNEL] [ 0.158128] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ KERNEL] [ 0.158355] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ KERNEL] [ 0.158391] pci 0000:00:16.0: reg 0x10: [mem 0xf7c06000-0xf7c0600f 64bit] [ KERNEL] [ 0.158493] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ KERNEL] [ 0.158656] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ KERNEL] [ 0.158688] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c04000-0xf7c043ff] [ KERNEL] [ 0.158800] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ KERNEL] [ 0.158958] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ KERNEL] [ 0.159085] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ KERNEL] [ 0.159264] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ KERNEL] [ 0.159297] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c03000-0xf7c033ff] [ KERNEL] [ 0.159406] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ KERNEL] [ 0.159557] pci 0000:00:1f.0: [8086:1e5f] type 00 class 0x060100 [ KERNEL] [ 0.159847] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 [ KERNEL] [ 0.159882] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7] [ KERNEL] [ 0.159893] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3] [ KERNEL] [ 0.159904] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097] [ KERNEL] [ 0.159917] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083] [ KERNEL] [ 0.159929] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ KERNEL] [ 0.159942] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c02000-0xf7c027ff] [ KERNEL] [ 0.160010] pci 0000:00:1f.2: PME# supported from D3hot [ KERNEL] [ 0.160150] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ KERNEL] [ 0.160191] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c01000-0xf7c010ff 64bit] [ KERNEL] [ 0.160223] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ KERNEL] [ 0.161094] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ KERNEL] [ 0.161094] pci 0000:01:00.0: reg 0x10: [io 0xe000-0xe0ff] [ KERNEL] [ 0.161094] pci 0000:01:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref] [ KERNEL] [ 0.161094] pci 0000:01:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref] [ KERNEL] [ 0.161094] pci 0000:01:00.0: supports D1 D2 [ KERNEL] [ 0.161094] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ KERNEL] [ 0.161094] pci 0000:00:1c.0: PCI bridge to [bus 01] [ KERNEL] [ 0.161094] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ KERNEL] [ 0.161094] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ KERNEL] [ 0.161094] pci_bus 0000:00: on NUMA node 0 [ KERNEL] [ 0.162073] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 10 11 12 14 15) [ KERNEL] [ 0.162162] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ KERNEL] [ 0.162248] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15) [ KERNEL] [ 0.162332] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15) [ KERNEL] [ 0.162415] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ KERNEL] [ 0.162499] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ KERNEL] [ 0.162582] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ KERNEL] [ 0.162667] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15) [ KERNEL] [ 0.163252] ACPI: bus type USB registered [ KERNEL] [ 0.163293] usbcore: registered new interface driver usbfs [ KERNEL] [ 0.163316] usbcore: registered new interface driver hub [ KERNEL] [ 0.163348] usbcore: registered new device driver usb [ KERNEL] [ 0.163401] pps_core: LinuxPPS API ver. 1 registered [ KERNEL] [ 0.163402] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ KERNEL] [ 0.163411] PTP clock support registered [ KERNEL] [ 0.163471] PCI: Using ACPI for IRQ routing [ KERNEL] [ 0.165541] PCI: pci_cache_line_size set to 64 bytes [ KERNEL] [ 0.165586] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ KERNEL] [ 0.165588] e820: reserve RAM buffer [mem 0x749f8000-0x77ffffff] [ KERNEL] [ 0.165590] e820: reserve RAM buffer [mem 0x75520000-0x77ffffff] [ KERNEL] [ 0.165592] e820: reserve RAM buffer [mem 0x75d8c000-0x77ffffff] [ KERNEL] [ 0.165594] e820: reserve RAM buffer [mem 0x76000000-0x77ffffff] [ KERNEL] [ 0.165870] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ KERNEL] [ 0.165870] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ KERNEL] [ 0.167298] clocksource: Switched to clocksource tsc-early [ KERNEL] [ 0.167360] pnp: PnP ACPI init [ KERNEL] [ 0.167360] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ KERNEL] [ 0.167360] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ KERNEL] [ 0.167360] system 00:01: [io 0x0680-0x069f] has been reserved [ KERNEL] [ 0.167360] system 00:01: [io 0x1000-0x100f] has been reserved [ KERNEL] [ 0.167360] system 00:01: [io 0xffff] has been reserved [ KERNEL] [ 0.167360] system 00:01: [io 0xffff] has been reserved [ KERNEL] [ 0.167360] system 00:01: [io 0x0400-0x0453] has been reserved [ KERNEL] [ 0.167360] system 00:01: [io 0x0458-0x047f] has been reserved [ KERNEL] [ 0.167360] system 00:01: [io 0x0500-0x057f] has been reserved [ KERNEL] [ 0.167360] system 00:01: [io 0x164e-0x164f] has been reserved [ KERNEL] [ 0.167360] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ KERNEL] [ 0.167360] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ KERNEL] [ 0.167360] system 00:03: [io 0x0454-0x0457] has been reserved [ KERNEL] [ 0.167360] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ KERNEL] [ 0.167360] system 00:04: [io 0x0290-0x029f] has been reserved [ KERNEL] [ 0.167360] system 00:04: [io 0x02a0-0x02af] has been reserved [ KERNEL] [ 0.167360] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ KERNEL] [ 0.167360] ACPI: IRQ 4 override to edge, high [ KERNEL] [ 0.167360] pnp 00:05: [dma 0 disabled] [ KERNEL] [ 0.167360] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ KERNEL] [ 0.167360] ACPI: IRQ 3 override to edge, high [ KERNEL] [ 0.167360] pnp 00:06: [dma 0 disabled] [ KERNEL] [ 0.167360] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ KERNEL] [ 0.167360] ACPI: IRQ 11 override to edge, high [ KERNEL] [ 0.167360] pnp 00:07: [dma 0 disabled] [ KERNEL] [ 0.167360] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ KERNEL] [ 0.167360] ACPI: IRQ 10 override to edge, high [ KERNEL] [ 0.167360] pnp 00:08: [dma 0 disabled] [ KERNEL] [ 0.167360] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ KERNEL] [ 0.167637] pnp 00:09: [dma 3] [ KERNEL] [ 0.167788] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active) [ KERNEL] [ 0.167878] system 00:0a: [io 0x04d0-0x04d1] has been reserved [ KERNEL] [ 0.167892] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ KERNEL] [ 0.168214] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved [ KERNEL] [ 0.168220] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved [ KERNEL] [ 0.168224] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved [ KERNEL] [ 0.168228] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved [ KERNEL] [ 0.168232] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved [ KERNEL] [ 0.168235] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved [ KERNEL] [ 0.168239] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved [ KERNEL] [ 0.168241] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved [ KERNEL] [ 0.168244] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved [ KERNEL] [ 0.168246] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved [ KERNEL] [ 0.168248] system 00:0b: [mem 0x7ea00000-0x7ea00fff] has been reserved [ KERNEL] [ 0.168258] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ KERNEL] [ 0.168510] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved [ KERNEL] [ 0.168515] system 00:0c: [mem 0x40000000-0x401fffff] has been reserved [ KERNEL] [ 0.168527] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ KERNEL] [ 0.168582] pnp: PnP ACPI: found 13 devices [ KERNEL] [ 0.205828] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ KERNEL] [ 0.205860] pci 0000:00:1c.0: PCI bridge to [bus 01] [ KERNEL] [ 0.205866] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ KERNEL] [ 0.205880] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ KERNEL] [ 0.205892] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ KERNEL] [ 0.205896] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ KERNEL] [ 0.205899] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ KERNEL] [ 0.205902] pci_bus 0000:00: resource 7 [mem 0x000d8000-0x000dbfff window] [ KERNEL] [ 0.205905] pci_bus 0000:00: resource 8 [mem 0x000dc000-0x000dffff window] [ KERNEL] [ 0.205908] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff window] [ KERNEL] [ 0.205911] pci_bus 0000:00: resource 10 [mem 0x000e4000-0x000e7fff window] [ KERNEL] [ 0.205914] pci_bus 0000:00: resource 11 [mem 0x7ea00000-0xfeafffff window] [ KERNEL] [ 0.205917] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ KERNEL] [ 0.205920] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] [ KERNEL] [ 0.206131] NET: Registered protocol family 2 [ KERNEL] [ 0.206300] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ KERNEL] [ 0.206305] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ KERNEL] [ 0.206322] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ KERNEL] [ 0.206342] TCP: Hash tables configured (established 8192 bind 8192) [ KERNEL] [ 0.206370] UDP hash table entries: 512 (order: 2, 16384 bytes) [ KERNEL] [ 0.206375] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ KERNEL] [ 0.206413] NET: Registered protocol family 1 [ KERNEL] [ 0.206583] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling [ KERNEL] [ 0.206606] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ KERNEL] [ 0.229256] pci 0000:00:1a.0: 0xc12bc3c0 took 22108 usecs [ KERNEL] [ 0.253239] pci 0000:00:1d.0: 0xc12bc3c0 took 23408 usecs [ KERNEL] [ 0.253260] PCI: CLS mismatch (64 != 32), using 64 bytes [ KERNEL] [ 0.938450] Initialise system trusted keyrings [ KERNEL] [ 0.939353] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ KERNEL] [ 0.941726] pstore: using deflate compression [ KERNEL] [ 0.949727] Key type asymmetric registered [ KERNEL] [ 0.949730] Asymmetric key parser 'x509' registered [ KERNEL] [ 0.949752] bounce: pool size: 64 pages [ KERNEL] [ 0.949776] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ KERNEL] [ 0.949779] io scheduler noop registered [ KERNEL] [ 0.949781] io scheduler deadline registered (default) [ KERNEL] [ 0.950374] intel_idle: MWAIT substates: 0x1120 [ KERNEL] [ 0.950377] intel_idle: v0.4.1 model 0x2A [ KERNEL] [ 0.950560] intel_idle: lapic_timer_reliable_states 0xffffffff [ KERNEL] [ 0.950691] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ KERNEL] [ 0.950732] ACPI: Power Button [PWRB] [ KERNEL] [ 0.950827] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ KERNEL] [ 0.950879] ACPI: Power Button [PWRF] [ KERNEL] [ 0.952969] thermal LNXTHERM:00: registered as thermal_zone0 [ KERNEL] [ 0.952972] ACPI: Thermal Zone [TZ00] (28 C) [ KERNEL] [ 0.953640] thermal LNXTHERM:01: registered as thermal_zone1 [ KERNEL] [ 0.953643] ACPI: Thermal Zone [TZ01] (30 C) [ KERNEL] [ 0.954810] zram: Added device: zram0 [ KERNEL] [ 0.954819] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ KERNEL] [ 0.954820] ehci-pci: EHCI PCI platform driver [ KERNEL] [ 0.955059] ehci-pci 0000:00:1a.0: EHCI Host Controller [ KERNEL] [ 0.955071] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ KERNEL] [ 0.955090] ehci-pci 0000:00:1a.0: debug port 2 [ KERNEL] [ 0.959009] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ KERNEL] [ 0.959343] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c04000 [ KERNEL] [ 0.973522] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ KERNEL] [ 0.973593] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ KERNEL] [ 0.973597] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ KERNEL] [ 0.973600] usb usb1: Product: EHCI Host Controller [ KERNEL] [ 0.973603] usb usb1: Manufacturer: Linux 4.19.8 ehci_hcd [ KERNEL] [ 0.973605] usb usb1: SerialNumber: 0000:00:1a.0 [ KERNEL] [ 0.973883] hub 1-0:1.0: USB hub found [ KERNEL] [ 0.973895] hub 1-0:1.0: 2 ports detected [ KERNEL] [ 0.974507] ehci-pci 0000:00:1d.0: EHCI Host Controller [ KERNEL] [ 0.974519] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ KERNEL] [ 0.974537] ehci-pci 0000:00:1d.0: debug port 2 [ KERNEL] [ 0.978447] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ KERNEL] [ 0.994693] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c03000 [ KERNEL] [ 1.009132] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ KERNEL] [ 1.009211] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ KERNEL] [ 1.009213] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ KERNEL] [ 1.009215] usb usb2: Product: EHCI Host Controller [ KERNEL] [ 1.009217] usb usb2: Manufacturer: Linux 4.19.8 ehci_hcd [ KERNEL] [ 1.009219] usb usb2: SerialNumber: 0000:00:1d.0 [ KERNEL] [ 1.009419] hub 2-0:1.0: USB hub found [ KERNEL] [ 1.009431] hub 2-0:1.0: 2 ports detected [ KERNEL] [ 1.009749] ehci-platform: EHCI generic platform driver [ KERNEL] [ 1.009778] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ KERNEL] [ 1.009780] ohci-pci: OHCI PCI platform driver [ KERNEL] [ 1.009803] ohci-platform: OHCI generic platform driver [ KERNEL] [ 1.009822] uhci_hcd: USB Universal Host Controller Interface driver [ KERNEL] [ 1.009994] i8042: PNP: No PS/2 controller found. [ KERNEL] [ 1.009996] hv_vmbus: registering driver hyperv_keyboard [ KERNEL] [ 1.010063] mousedev: PS/2 mouse device common for all mice [ KERNEL] [ 1.010273] usbcore: registered new interface driver usbtouchscreen [ KERNEL] [ 1.010359] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ KERNEL] [ 1.010468] rtc_cmos 00:02: RTC can wake from S4 [ KERNEL] [ 1.010685] rtc_cmos 00:02: registered as rtc0 [ KERNEL] [ 1.010723] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ KERNEL] [ 1.010787] cpufreq_nforce2: No nForce2 chipset [ KERNEL] [ 1.010793] intel_pstate: Intel P-state driver initializing [ KERNEL] [ 1.010909] hidraw: raw HID events driver (C) Jiri Kosina [ KERNEL] [ 1.011052] hv_vmbus: registering driver hid_hyperv [ KERNEL] [ 1.011258] usbcore: registered new interface driver usbhid [ KERNEL] [ 1.011259] usbhid: USB HID core driver [ KERNEL] [ 1.011418] NET: Registered protocol family 17 [ KERNEL] [ 1.012314] Using IPI No-Shortcut mode [ KERNEL] [ 1.012320] sched_clock: Marking stable (1006933905, 2395500)->(1014998599, -5669194) [ KERNEL] [ 1.012601] Loading compiled-in X.509 certificates [ KERNEL] [ 1.012884] rtc_cmos 00:02: setting system clock to 2018-12-20 17:27:58 UTC (1545326878) [ KERNEL] [ 1.012895] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ KERNEL] [ 1.036502] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ KERNEL] [ 1.036533] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ KERNEL] [ 1.036535] cfg80211: failed to load regulatory.db [ KERNEL] [ 1.037752] Freeing unused kernel image memory: 3976K [ KERNEL] [ 1.049228] Write protecting the kernel text: 4656k [ KERNEL] [ 1.049250] Write protecting the kernel read-only data: 872k [ KERNEL] [ 1.049252] Run /init as init process [ KERNEL] [ 1.309132] usb 1-1: new high-speed USB device number 2 using ehci-pci [ KERNEL] [ 1.345129] usb 2-1: new high-speed USB device number 2 using ehci-pci [ pfac] [ 1.369482] Run /sbin/initrd. [ pfac] [ 1.369523] Ok, PID 757. [ initrd] [ 1.370102] WTware 5.8.40 shell. [ initrd] [ 1.371591] USB boot. [ KERNEL] [ 1.465526] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ KERNEL] [ 1.465532] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ KERNEL] [ 1.465763] hub 1-1:1.0: USB hub found [ KERNEL] [ 1.465841] hub 1-1:1.0: 4 ports detected [ KERNEL] [ 1.501526] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ KERNEL] [ 1.501532] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ KERNEL] [ 1.501762] hub 2-1:1.0: USB hub found [ KERNEL] [ 1.501833] hub 2-1:1.0: 4 ports detected [ KERNEL] [ 1.753130] usb 1-1.1: new high-speed USB device number 3 using ehci-pci [ KERNEL] [ 1.789129] usb 2-1.1: new low-speed USB device number 3 using ehci-pci [ KERNEL] [ 1.903474] usb 2-1.1: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00 [ KERNEL] [ 1.903480] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ KERNEL] [ 1.903483] usb 2-1.1: Product: USB Keyboard [ KERNEL] [ 1.903487] usb 2-1.1: Manufacturer: Logitech [ KERNEL] [ 1.908914] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:046D:C31C.0001/input/input3 [ KERNEL] [ 1.953132] tsc: Refined TSC clocksource calibration: 1496.600 MHz [ KERNEL] [ 1.953153] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x159296d3708, max_idle_ns: 440795218047 ns [ KERNEL] [ 1.953168] clocksource: Switched to clocksource tsc [ KERNEL] [ 1.965481] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.0-1.1/input0 [ KERNEL] [ 1.972134] input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:046D:C31C.0002/input/input4 [ KERNEL] [ 2.029294] input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:046D:C31C.0002/input/input5 [ KERNEL] [ 2.029408] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1d.0-1.1/input1 [ KERNEL] [ 2.094883] usb 1-1.1: New USB device found, idVendor=0951, idProduct=1666, bcdDevice= 1.00 [ KERNEL] [ 2.094886] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ KERNEL] [ 2.094888] usb 1-1.1: Product: DataTraveler 3.0 [ KERNEL] [ 2.094890] usb 1-1.1: Manufacturer: Kingston [ KERNEL] [ 2.094892] usb 1-1.1: SerialNumber: 001E4FB76AACBF21A71B4600 [ KERNEL] [ 2.109138] usb 2-1.2: new low-speed USB device number 4 using ehci-pci [ KERNEL] [ 2.222724] usb 2-1.2: New USB device found, idVendor=045e, idProduct=0040, bcdDevice= 3.00 [ KERNEL] [ 2.222730] usb 2-1.2: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ KERNEL] [ 2.222734] usb 2-1.2: Product: Microsoft 3-Button Mouse with IntelliEye(TM) [ KERNEL] [ 2.222737] usb 2-1.2: Manufacturer: Microsoft [ KERNEL] [ 2.225741] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:045E:0040.0003/input/input6 [ KERNEL] [ 2.225908] hid-generic 0003:045E:0040.0003: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1.2/input0 [ initrd] [ 2.262913] Load ISO 9660 and UDF CDROM filesystem drivers. [ initrd] [ 2.262959] modprobe udf. [ initrd] [ 2.264853] modprobe isofs. [ initrd] [ 2.267037] Load VFAT filesystem driver. [ initrd] [ 2.267080] modprobe fat. [ initrd] [ 2.269335] modprobe vfat. [ initrd] [ 2.271685] Load usb storage driver. [ initrd] [ 2.271728] modprobe scsi_mod. [ initrd] [ 2.274205] modprobe usb-storage. [ KERNEL] [ 2.276255] SCSI subsystem initialized [ initrd] [ 2.278279] modprobe sd_mod. [ KERNEL] [ 2.280002] usb-storage 1-1.1:1.0: USB Mass Storage device detected [ KERNEL] [ 2.280122] scsi host0: usb-storage 1-1.1:1.0 [ KERNEL] [ 2.280315] usbcore: registered new interface driver usb-storage [ KERNEL] [ 2.305132] usb 2-1.3: new full-speed USB device number 5 using ehci-pci [ KERNEL] [ 2.641488] usb 2-1.3: New USB device found, idVendor=1395, idProduct=0035, bcdDevice= 6.02 [ KERNEL] [ 2.641503] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ KERNEL] [ 2.641505] usb 2-1.3: Product: Sennheiser SC60 Control [ KERNEL] [ 2.641507] usb 2-1.3: Manufacturer: Sennheiser [ KERNEL] [ 2.641508] usb 2-1.3: SerialNumber: 5698570477461315 [ KERNEL] [ 2.804674] input: Sennheiser Sennheiser SC60 Control Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.3/0003:1395:0035.0004/input/input7 [ KERNEL] [ 2.861288] input: Sennheiser Sennheiser SC60 Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.3/0003:1395:0035.0004/input/input8 [ KERNEL] [ 2.861454] input: Sennheiser Sennheiser SC60 Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.3/0003:1395:0035.0004/input/input9 [ KERNEL] [ 2.861628] hid-generic 0003:1395:0035.0004: input,hiddev96,hidraw3: USB HID v1.11 Device [Sennheiser Sennheiser SC60 Control] on usb-0000:00:1d.0-1.3/input3 [ KERNEL] [ 3.385462] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6 [ KERNEL] [ 4.391486] sd 0:0:0:0: [sda] 15364416 512-byte logical blocks: (7.87 GB/7.33 GiB) [ KERNEL] [ 4.392185] sd 0:0:0:0: [sda] Write Protect is off [ KERNEL] [ 4.392191] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 [ KERNEL] [ 4.392784] sd 0:0:0:0: [sda] No Caching mode page found [ KERNEL] [ 4.392788] sd 0:0:0:0: [sda] Assuming drive cache: write through [ KERNEL] [ 4.421370] sda: [ KERNEL] [ 4.421635] random: fast init done [ KERNEL] [ 4.423771] sd 0:0:0:0: [sda] Attached SCSI removable disk [ initrd] [ 4.538446] Success: first USB disk mounted to /bootmedia. [ initrd] [ 4.542165] Cache package files: auto. [ initrd] [ 4.542202] WTpassword empty. [ initrd] [ 4.542227] Disable cache package files. [ initrd] [ 4.542264] Unpack /bootmedia/packages/lib6. [ initrd] [ 5.286207] PCI: C 0c:05 8086:1e22 Serial bus controller SMBus Intel Corporation 7 Series/C216 Chipset Family SMBus Controller. [ initrd] [ 5.286259] PCI: C 06 8086:0104 Bridge Intel Corporation 2nd Generation Core Processor Family DRAM Controller. [ initrd] [ 5.286285] PCI: C 0c:03 8086:1e2d Serial bus controller USB controller Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller. [ initrd] [ 5.286310] PCI: C 0c:03 8086:1e26 Serial bus controller USB controller Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller. [ initrd] [ 5.286334] PCI: C 03 8086:0106 Display controller Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Contro. [ initrd] [ 5.286359] PCI: C 01:06 8086:1e03 Mass storage controller SATA controller Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode]. [ initrd] [ 5.286383] PCI: C 06:04 8086:1e10 Bridge PCI bridge Intel Corporation 7 Series/C216 Chipset Family PCI Express Root Port 1. [ initrd] [ 5.286407] PCI: C 06:01 8086:1e5f Bridge ISA bridge Intel Corporation NM70 Express Chipset LPC Controller. [ initrd] [ 5.286431] PCI: C 07:80 8086:1e3a Communication controller Communication controller Intel Corporation 7 Series/C216 Chipset Family MEI Controller. [ initrd] [ 5.286455] PCI: C 02 10ec:8168 Network controller Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller. [ initrd] [ 5.302696] USB: 045e:0040 Microsoft Corp. Wheel Mouse Optical. [ initrd] [ 5.302738] USB: 8087:0024 Intel Corp. Integrated Rate Matching Hub. [ initrd] [ 5.302761] USB: 0951:1666 Kingston Technology DataTraveler 100 G3/G4/SE9 G2. [ initrd] [ 5.302782] USB: 1395:0035 Sennheiser Communications. [ initrd] [ 5.302802] USB: 046d:c31c Logitech, Inc. Keyboard K120. /--- FILE "/bootmedia/configs/initrd.wtc" ----------------------- | clientIP = * | config = network | tftpIP = \---------------------------------------------------- [ initrd] [ 5.303394] Load ethernet drivers. [ initrd] [ 5.304469] modprobe r8169. [ initrd] [ 5.311961] NIC module r8169.ko loaded. [ KERNEL] [ 5.310578] libphy: r8169: probed [ KERNEL] [ 5.310968] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl, 00:e0:c5:38:16:d3, XID 2c900800, IRQ 24 [ KERNEL] [ 5.310973] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ KERNEL] [ 5.320537] Generic PHY r8169-100:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE) [ KERNEL] [ 5.547831] r8169 0000:01:00.0 eth0: Link is Down [ KERNEL] [ 7.662537] r8169 0000:01:00.0 eth0: Link is Up - 100Mbps/Half - flow control off [ initrd] [ 7.749164] eth0: 10ec:8168. Apply WOL configuration. [ initrd] [ 7.749461] WTpassword empty. !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!DHCP INFO REDACTED!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! [ initrd] [ 9.914957] [DHCP] TFTP IP already specified. [ initrd] [ 9.914979] [DHCP] No boot file from DHCP. [ initrd] [ 9.915003] [DHCP] TFTP binary "", configs prefix "", using "/" slash. WTC listener is active. WTC broadcast listener is active. Send broadcast WTCU discover. [ pfac] [ 9.915683] Run /sbin/httpd. [ initrd] [ 9.915703] Run '/sbin/httpd', log '/tmp/httpd.out', env '', pid ''. [ pfac] [ 9.915733] Ok, PID 893. [ initrd] [ 9.915750] [TFTP] Download config file Everyone/list.wtc from . [ httpd] [ 9.916990] HTTP Server, WTware 5.8.40 [ initrd] [ 9.920604] [TFTP] WTware TFTP v.5.8.40. [ KERNEL] [ 9.922505] random: httpd: uninitialized urandom read (32 bytes read) [ initrd] [ 9.922443] [TFTP] Download config file Terminals/00.E0.C5.38.16.D3/config.wtc from . [ initrd] [ 9.923967] [TFTP] Download config file Terminals/00.E0.C5.38.16.D3/wtware.lic from . [ initrd] [ 9.924601] [TFTP] Error code 1: File not found.. /--- FILE "/tmp/config.wtc" ----------------------- | display=1920x1080, VGA | M2_display=1920x1080, HDMI | video=intel(U) | SIP=0000:0000@, config:linphone.wtc | sound=on | timezone=Central Standard Time | domain=westpark | M2_position=right | chrome_mode=window | chrome_url= | loadbalanceinfo=tsv://VMResource.1. | chrome_language=en | clienthostname=T8432 | turnoffmenu=on | connection | application=tsclient | server= | displayName= | connection | application=chrome | displayName=Self Service Portal \---------------------------------------------------- [ initrd] [ 9.924818] [TFTP] Download config file Everyone/all.wtc from . /--- FILE "/tmp/all.wtc" ----------------------- | [BOM] | server= | sleep=10,standby \---------------------------------------------------- [ initrd] [ 9.926267] [TFTP] Download config file Everyone/wtware.lic from . [ initrd] [ 9.928769] Remount /bootmedia for writing. [ initrd] [ 9.931139] Remount /bootmedia as read-only. /--- FILE "/etc/config.compiled" ----------------------- | [BOM] | server= | sleep=10,standby | display=1920x1080, VGA | M2_display=1920x1080, HDMI | video=intel(U) | SIP=0000:0000@, config:linphone.wtc | sound=on | timezone=Central Standard Time | domain=westpark | M2_position=right | chrome_mode=window | chrome_url= | loadbalanceinfo=tsv://VMResource.1. | chrome_language=en | clienthostname=T8432 | turnoffmenu=on | connection | application=tsclient | server= | displayName= | connection | application=chrome | displayName=Self Service Portal \---------------------------------------------------- [ initrd] [ 10.002186] Hostname: "T8432". [ initrd] [ 10.094913] [NTP] 42 DHCP option is not set. Everyone can control terminal by RSH. RSH: listener is active. Send broadcast WTCU discover. [ httpd] [ 10.095898] Reread settings. [ httpd] [ 10.096019] Everyone can control terminal by HTTP. [ initrd] [ 10.099375] Unpack /bootmedia/packages/uintel. [ initrd] [ 10.302559] Unpack /bootmedia/packages/f. [ initrd] [ 10.696238] Unpack /bootmedia/packages/f-i915. [ initrd] [ 11.491457] Unpack /bootmedia/packages/u. [ initrd] [ 12.816318] Unpack /bootmedia/packages/dbus. [ initrd] [ 13.210520] +--- Executing "/usr/bin/dbus-uuidgen --ensure" [ initrd] [ 13.212478] +- Errorlevel: 0, output: File is empty. [ initrd] [ 13.212576] +------------------------ [ initrd] [ 13.212609] +--- Executing "/usr/bin/dbus-daemon --system" [ KERNEL] [ 13.217285] random: dbus-daemon: uninitialized urandom read (12 bytes read) [ initrd] [ 13.220561] +- Errorlevel: 0, output: [ KERNEL] [ 13.221969] random: dbus-daemon: uninitialized urandom read (12 bytes read) File is empty. [ initrd] [ 13.220851] +------------------------ [ initrd] [ 13.220888] Unpack /bootmedia/packages/graphic. [ gm] [ 13.882427] WTware 5.8.40 session manager. [ gm] [ 13.883191] Load agpgart driver. [ gm] [ 13.883228] modprobe agpgart. [ gm] [ 13.885259] modprobe intel-agp. [ KERNEL] [ 13.887271] Linux agpgart interface v0.103 [ gm] [ 13.887835] Unpack /bootmedia/packages/ufont. [ gm] [ 14.688671] Unpack /bootmedia/packages/uetc. [ gm] [ 19.318420] Unpack /bootmedia/packages/xml2. [ gm] [ 24.339712] EV_ABS flag found. Add mouse event9: Sennheiser Sennheiser SC60 Control. [ gm] [ 24.339793] Add keyboard event8: Sennheiser Sennheiser SC60 Control. [ gm] [ 24.339840] Add keyboard event7: Sennheiser Sennheiser SC60 Control Consumer Control. [ gm] [ 24.398792] EV_REL flag found. Add mouse event6: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM). [ gm] [ 24.398858] Add keyboard event5: Logitech USB Keyboard System Control. [ gm] [ 24.398910] Add keyboard event4: Logitech USB Keyboard Consumer Control. [ gm] [ 24.398955] Add keyboard event3: Logitech USB Keyboard. [ gm] [ 24.399000] Ignore event2: PC Speaker. [ gm] [ 24.430799] Add keyboard event1: Power Button. [ gm] [ 24.430846] Add keyboard event0: Power Button. [ gm] [ 24.430958] Display mode: 1920x1080, 32 bit, landscape, 0 Hz, modeline "", DDC enabled, connector 1. [ gm] [ 24.430989] M2 mode: 1920x1080, landscape, 0 Hz, modeline "", DDC enabled, connector 3. /--- FILE "/etc/xorg.conf" ----------------------- | Section "InputDevice" | Identifier "Mouse0" | Driver "evdev" | Option "Device" "/dev/input/event9" | Option "SendCoreEvents" "on" | EndSection | Section "InputDevice" | Identifier "Keyboard0" | Driver "evdev" | Option "Device" "/dev/input/event8" | Option "SendCoreEvents" "on" | Option "XkbLayout" "us" | Option "XkbRules" "evdev" | EndSection | Section "InputDevice" | Identifier "Keyboard1" | Driver "evdev" | Option "Device" "/dev/input/event7" | Option "SendCoreEvents" "on" | Option "XkbLayout" "us" | Option "XkbRules" "evdev" | EndSection | Section "InputDevice" | Identifier "Mouse1" | Driver "evdev" | Option "Device" "/dev/input/event6" | Option "SendCoreEvents" "on" | EndSection | Section "InputDevice" | Identifier "Keyboard2" | Driver "evdev" | Option "Device" "/dev/input/event5" | Option "SendCoreEvents" "on" | Option "XkbLayout" "us" | Option "XkbRules" "evdev" | EndSection | Section "InputDevice" | Identifier "Keyboard3" | Driver "evdev" | Option "Device" "/dev/input/event4" | Option "SendCoreEvents" "on" | Option "XkbLayout" "us" | Option "XkbRules" "evdev" | EndSection | Section "InputDevice" | Identifier "Keyboard4" | Driver "evdev" | Option "Device" "/dev/input/event3" | Option "SendCoreEvents" "on" | Option "XkbLayout" "us" | Option "XkbRules" "evdev" | EndSection | Section "InputDevice" | Identifier "Keyboard5" | Driver "evdev" | Option "Device" "/dev/input/event1" | Option "SendCoreEvents" "on" | Option "XkbLayout" "us" | Option "XkbRules" "evdev" | EndSection | Section "InputDevice" | Identifier "Keyboard6" | Driver "evdev" | Option "Device" "/dev/input/event0" | Option "SendCoreEvents" "on" | Option "XkbLayout" "us" | Option "XkbRules" "evdev" | EndSection | Section "ServerFlags" | Option "DontVTSwitch" "on" | Option "DontZoom" "on" | Option "DontZap" "on" | Option "NoPM" "on" | Option "AutoAddDevices" "off" | EndSection | Section "Device" | Identifier "Video0" | Driver "intel" | Screen 0 | Option "ZaphodHeads" "VGA1" | EndSection | Section "Device" | Identifier "Video1" | Driver "intel" | Screen 1 | Option "ZaphodHeads" "HDMI1" | EndSection | Section "Monitor" | Identifier "Monitor0" | HorizSync 20-200 | VertRefresh 50-60 | Option "PreferredMode" "1920x1080" | EndSection | Section "Monitor" | Identifier "Monitor1" | HorizSync 20-200 | VertRefresh 50-60 | Option "PreferredMode" "1920x1080" | EndSection | Section "Screen" | Identifier "Screen0" | Device "Video0" | Monitor "Monitor0" | DefaultDepth 24 | SubSection "Display" | Depth 24 | Modes "1920x1080" | Virtual 1920 1080 | EndSubSection | EndSection | Section "Screen" | Identifier "Screen1" | Device "Video1" | Monitor "Monitor1" | DefaultDepth 24 | SubSection "Display" | Depth 24 | Modes "1920x1080" | Virtual 1920 1080 | EndSubSection | EndSection | Section "ServerLayout" | Identifier "Layout" | Screen 0 "Screen0" 0 0 | Screen 1 "Screen1" 1920 0 | InputDevice "Mouse0" | InputDevice "Keyboard0" | InputDevice "Keyboard1" | InputDevice "Mouse1" | InputDevice "Keyboard2" | InputDevice "Keyboard3" | InputDevice "Keyboard4" | InputDevice "Keyboard5" | InputDevice "Keyboard6" | EndSection \---------------------------------------------------- [ gm] [ 24.474776] modprobe i915. [ KERNEL] [ 24.494394] [drm] Replacing VGA console driver [ KERNEL] [ 24.494908] Console: switching to colour dummy device 80x25 [ KERNEL] [ 24.495766] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ KERNEL] [ 24.495768] [drm] Driver supports precise vblank timestamp query. [ KERNEL] [ 24.496606] [drm:0xf7f39ba7] *ERROR* Primary WM3 latency not provided [ KERNEL] [ 24.496609] [drm:0xf7f39ba7] *ERROR* Sprite WM3 latency not provided [ KERNEL] [ 24.496612] [drm:0xf7f39ba7] *ERROR* Cursor WM3 latency not provided [ KERNEL] [ 25.406392] [drm] failed to retrieve link info, disabling eDP [ KERNEL] [ 25.412675] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0 [ KERNEL] [ 25.414309] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ KERNEL] [ 25.414721] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10 [ KERNEL] [ 25.533252] fbcon: inteldrmfb (fb0) is primary device [ KERNEL] [ 25.643986] Console: switching to colour frame buffer device 240x67 [ KERNEL] [ 25.669710] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ gm] [ 25.667754] count_fbs 0. [ gm] [ 25.667793] count_crtcs 2. [ gm] [ 25.667813] count_connectors 5. [ gm] [ 25.667830] count_encoders 5. [ gm] [ 25.667846] min_width 0, max_width 8192, min_height 0, max_height 8192. [ gm] [ 25.804780] ====================== [ gm] [ 25.804830] connector_id 52. [ gm] [ 25.804860] encoder_id 53. [ gm] [ 25.804888] connector_type VGA (1). [ gm] [ 25.804914] connector_type_id 1. [ gm] [ 25.804940] connection 1. [ gm] [ 25.804966] mm_width 480, mm_height 270. [ gm] [ 25.804991] subpixel 0. [ gm] [ 25.805016] count_modes 12. [ gm] [ 25.805041] count_props 4. [ gm] [ 25.805067] count_encoders 1. [ gm] [ 25.805094] encoders_ptr [53] [ gm] [ 25.805120] ====================== [ gm] [ 25.819365] ====================== [ gm] [ 25.819404] connector_id 55. [ gm] [ 25.819428] encoder_id 54. [ gm] [ 25.819450] connector_type HDMIA (11). [ gm] [ 25.819471] connector_type_id 1. [ gm] [ 25.819492] connection 1. [ gm] [ 25.819513] mm_width 480, mm_height 270. [ gm] [ 25.819534] subpixel 0. [ gm] [ 25.819555] count_modes 12. [ gm] [ 25.819577] count_props 8. [ gm] [ 25.819598] count_encoders 1. [ gm] [ 25.819619] encoders_ptr [54] [ gm] [ 25.819641] ====================== [ gm] [ 25.975811] ====================== [ gm] [ 25.975849] connector_id 61. [ gm] [ 25.975874] encoder_id 0. [ gm] [ 25.975894] connector_type DisplayPort (10). [ gm] [ 25.975911] connector_type_id 1. [ gm] [ 25.975935] connection 2. [ gm] [ 25.975952] mm_width 0, mm_height 0. [ gm] [ 25.975969] subpixel 0. [ gm] [ 25.976004] count_modes 0. [ gm] [ 25.976026] count_props 6. [ gm] [ 25.976048] count_encoders 1. [ gm] [ 25.976066] encoders_ptr [60] [ gm] [ 25.976084] ====================== [ gm] [ 25.978748] ====================== [ gm] [ 25.978781] connector_id 63. [ gm] [ 25.978809] encoder_id 0. [ gm] [ 25.978837] connector_type HDMIA (11). [ gm] [ 25.978864] connector_type_id 2. [ gm] [ 25.978891] connection 2. [ gm] [ 25.978917] mm_width 0, mm_height 0. [ gm] [ 25.978945] subpixel 0. [ gm] [ 25.978972] count_modes 0. [ gm] [ 25.978999] count_props 8. [ gm] [ 25.979023] count_encoders 1. [ gm] [ 25.979046] encoders_ptr [62] [ gm] [ 25.979068] ====================== [ gm] [ 25.979090] ====================== [ gm] [ 25.979112] connector_id 65. [ gm] [ 25.979135] encoder_id 0. [ gm] [ 25.979157] connector_type DisplayPort (10). [ gm] [ 25.979180] connector_type_id 2. [ gm] [ 25.979202] connection 2. [ gm] [ 25.979224] mm_width 0, mm_height 0. [ gm] [ 25.979247] subpixel 0. [ gm] [ 25.979269] count_modes 0. [ gm] [ 25.979291] count_props 6. [ gm] [ 25.979313] count_encoders 1. [ gm] [ 25.979335] encoders_ptr [64] [ gm] [ 25.979357] ====================== [ gm] [ 25.979378] ====================== [ gm] [ 25.979400] crtc_id 39. [ gm] [ 25.979422] fb buffer_id 95. [ gm] [ 25.979443] x 0, y 0. [ gm] [ 25.979469] mode_valid 1. [ gm] [ 25.979492] Mode 1920x1080: clock 148500 H 1920 2008 2052 2200 0 V 1080 1084 1089 1125 0 VR 60 flags 0x0005 type 0x0048. [ gm] [ 25.979514] gamma_size 256. [ gm] [ 25.979536] 0 connectors. [ gm] [ 25.979558] ====================== [ gm] [ 25.979579] ====================== [ gm] [ 25.979602] crtc_id 51. [ gm] [ 25.979624] fb buffer_id 95. [ gm] [ 25.979646] x 0, y 0. [ gm] [ 25.979667] mode_valid 1. [ gm] [ 25.979689] Mode 1920x1080: clock 148500 H 1920 2008 2052 2200 0 V 1080 1084 1089 1125 0 VR 60 flags 0x0005 type 0x0048. [ gm] [ 25.979711] gamma_size 256. [ gm] [ 25.979732] 0 connectors. [ gm] [ 25.979754] ====================== [ gm] [ 25.979775] ====================== [ gm] [ 25.979797] encoder_id 53. [ gm] [ 25.979819] encoder_type DAC (1). [ gm] [ 25.979840] crtc_id 39. [ gm] [ 25.979862] possible_crtcs 3. [ gm] [ 25.979884] possible_clones 11. [ gm] [ 25.979906] ====================== [ gm] [ 25.979928] ====================== [ gm] [ 25.979950] encoder_id 54. [ gm] [ 25.979972] encoder_type TMDS (2). [ gm] [ 25.979994] crtc_id 51. [ gm] [ 25.980016] possible_crtcs 3. [ gm] [ 25.980038] possible_clones 3. [ gm] [ 25.980059] ====================== [ gm] [ 25.980081] ====================== [ gm] [ 25.980102] encoder_id 60. [ gm] [ 25.980124] encoder_type TMDS (2). [ gm] [ 25.980146] crtc_id 0. [ gm] [ 25.980167] possible_crtcs 3. [ gm] [ 25.980189] possible_clones 4. [ gm] [ 25.980211] ====================== [ gm] [ 25.980232] ====================== [ gm] [ 25.980255] encoder_id 62. [ gm] [ 25.980276] encoder_type TMDS (2). [ gm] [ 25.980298] crtc_id 0. [ gm] [ 25.980321] possible_crtcs 3. [ gm] [ 25.980342] possible_clones 9. [ gm] [ 25.980364] ====================== [ gm] [ 25.980386] ====================== [ gm] [ 25.980408] encoder_id 64. [ gm] [ 25.980430] encoder_type TMDS (2). [ gm] [ 25.980452] crtc_id 0. [ gm] [ 25.980474] possible_crtcs 3. [ gm] [ 25.980496] possible_clones 16. [ gm] [ 25.980518] ====================== /--- FILE "/proc/mtrr" ----------------------- | reg00: base=0x000000000 ( 0MB), size= 2048MB, count=1: write-back | reg01: base=0x076800000 ( 1896MB), size= 8MB, count=1: uncachable | reg02: base=0x077000000 ( 1904MB), size= 16MB, count=1: uncachable | reg03: base=0x078000000 ( 1920MB), size= 128MB, count=1: uncachable | reg04: base=0x100000000 ( 4096MB), size= 4MB, count=1: write-back | reg05: base=0x100400000 ( 4100MB), size= 2MB, count=1: write-back \---------------------------------------------------- [ gm] [ 26.108243] Run '/usr/lib/xorg/Xorg -nolisten inet6 -s 0 -quiet -logfile /tmp/Xorg.0.log', log '/tmp/Xorg.out', env '', pid ''. [ pfac] [ 26.108288] Run /usr/lib/xorg/Xorg -nolisten inet6 -s 0 -quiet -logfile /tmp/Xorg.0.log. [ pfac] [ 26.108365] Ok, PID 974. [ X] [ 26.113493] [ 26.113] [ X] [ 26.113523] X.Org X Server 1.19.2 [ X] [ 26.113536] Release Date: 2017-03-02 [ X] [ 26.113549] [ 26.113] X Protocol Version 11, Revision 0 [ X] [ 26.113573] [ 26.113] Build Operating System: Linux 4.9.0-8-amd64 i686 Debian [ X] [ 26.113586] [ 26.113] Current Operating System: Linux wtware 4.19.8 #3 SMP Sat Dec 8 23:42:58 UTC 2018 i686 [ X] [ 26.113599] [ 26.113] Kernel command line: wtboot=usb1 quiet BOOT_IMAGE=packages/kernel [ X] [ 26.113610] [ 26.113] Build Date: 03 November 2018 03:08:43AM [ X] [ 26.113627] [ 26.113] xorg-server 2:1.19.2-1+deb9u5 (https://www.debian.org/support) [ X] [ 26.113639] [ 26.113] Current version of pixman: 0.34.0 [ X] [ 26.113671] [ 26.113] Before reporting problems, check http://wiki.x.org [ X] [ 26.113686] to make sure that you have the latest version. [ X] [ 26.113698] [ 26.113] Markers: (--) probed, (**) from config file, (==) default setting, [ X] [ 26.113711] (++) from command line, (!!) notice, (II) informational, [ X] [ 26.113723] (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ X] [ 26.113735] [ 26.113] (++) Log file: "/tmp/Xorg.0.log", Time: Thu Dec 20 17:28:23 2018 [ X] [ 26.113756] [ 26.113] (==) Using config file: "/etc/xorg.conf" [ X] [ 26.113979] [ 26.113] (==) ServerLayout "Layout" [ X] [ 26.113995] [ 26.113] (**) |-->Screen "Screen0" (0) [ X] [ 26.114017] [ 26.113] (**) | |-->Monitor "Monitor0" [ X] [ 26.114285] [ 26.114] (**) | |-->Device "Video0" [ X] [ 26.114310] [ 26.114] (**) |-->Screen "Screen1" (1) [ X] [ 26.114323] [ 26.114] (**) | |-->Monitor "Monitor1" [ X] [ 26.114572] [ 26.114] (**) | |-->Device "Video1" [ X] [ 26.114595] [ 26.114] (**) |-->Input Device "Mouse0" [ X] [ 26.114608] [ 26.114] (**) |-->Input Device "Keyboard0" [ X] [ 26.114620] [ 26.114] (**) |-->Input Device "Keyboard1" [ X] [ 26.114640] [ 26.114] (**) |-->Input Device "Mouse1" [ X] [ 26.114653] [ 26.114] (**) |-->Input Device "Keyboard2" [ X] [ 26.114664] [ 26.114] (**) |-->Input Device "Keyboard3" [ X] [ 26.114691] [ 26.114] (**) |-->Input Device "Keyboard4" [ X] [ 26.114703] [ 26.114] (**) |-->Input Device "Keyboard5" [ X] [ 26.114727] [ 26.114] (**) |-->Input Device "Keyboard6" [ X] [ 26.114739] [ 26.114] (**) Option "DontVTSwitch" "on" [ X] [ 26.114751] [ 26.114] (**) Option "DontZap" "on" [ X] [ 26.114762] [ 26.114] (**) Option "DontZoom" "on" [ X] [ 26.114782] [ 26.114] (**) Option "NoPM" "on" [ X] [ 26.114795] [ 26.114] (**) Option "AutoAddDevices" "off" [ X] [ 26.114815] [ 26.114] (**) Not automatically adding devices [ X] [ 26.114828] [ 26.114] (==) Automatically enabling devices [ X] [ 26.114840] [ 26.114] (==) Automatically adding GPU devices [ X] [ 26.114861] [ 26.114] (==) Max clients allowed: 256, resource mask: 0x1fffff [ X] [ 26.114874] [ 26.114] (WW) The directory "/usr/share/fonts/X11/misc" does not exist. [ X] [ 26.114886] [ 26.114] Entry deleted from font path. [ X] [ 26.114908] [ 26.114] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ X] [ 26.114920] [ 26.114] Entry deleted from font path. [ X] [ 26.114932] [ 26.114] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ X] [ 26.114945] [ 26.114] Entry deleted from font path. [ X] [ 26.114967] [ 26.114] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ X] [ 26.114980] [ 26.114] Entry deleted from font path. [ X] [ 26.114992] [ 26.114] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist. [ X] [ 26.115004] [ 26.114] Entry deleted from font path. [ X] [ 26.115016] [ 26.114] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ X] [ 26.115027] [ 26.114] Entry deleted from font path. [ X] [ 26.115048] [ 26.114] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ X] [ 26.115060] [ 26.114] Entry deleted from font path. [ X] [ 26.115077] [ 26.114] (==) FontPath set to: [ X] [ 26.115089] built-ins [ X] [ 26.115101] [ 26.114] (==) ModulePath set to "/usr/lib/xorg/modules" [ X] [ 26.115122] [ 26.115] (==) |-->Input Device "Mouse0" [ X] [ 26.115135] [ 26.115] (==) |-->Input Device "" [ X] [ 26.115148] [ 26.115] (==) The core pointer device wasn't specified explicitly in the layout. [ X] [ 26.115159] Using the first mouse device. [ X] [ 26.115171] [ 26.115] (==) The core keyboard device wasn't specified explicitly in the layout. [ X] [ 26.115183] Using the default keyboard configuration. [ X] [ 26.115203] [ 26.115] (II) Loader magic: 0x6d0720 [ X] [ 26.115216] [ 26.115] (II) Module ABI versions: [ X] [ 26.115228] [ 26.115] X.Org ANSI C Emulation: 0.4 [ X] [ 26.115240] [ 26.115] X.Org Video Driver: 23.0 [ X] [ 26.115251] [ 26.115] X.Org XInput driver : 24.1 [ X] [ 26.115262] [ 26.115] X.Org Server Extension : 10.0 [ X] [ 26.116119] [ 26.116] (--) using VT number 2 [ KERNEL] [ 26.118544] random: Xorg: uninitialized urandom read (16 bytes read) [ X] [ 26.116176] [ 26.116] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ KERNEL] [ 26.118970] random: Xorg: uninitialized urandom read (16 bytes read) [ X] [ 26.116907] [ 26.116] (II) xfree86: Adding drm device (/dev/dri/card0) [ X] [ 26.126003] [ 26.125] (--) PCI:*(0:0:2:0) 8086:0106:5678:1234 rev 9, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072 [ X] [ 26.126145] [ 26.126] (II) LoadModule: "glx" [ X] [ 26.126294] [ 26.126] (WW) Warning, couldn't open module glx [ X] [ 26.126321] [ 26.126] (II) UnloadModule: "glx" [ X] [ 26.126335] [ 26.126] (II) Unloading glx [ X] [ 26.126348] [ 26.126] (EE) Failed to load module "glx" (module does not exist, 0) [ X] [ 26.126370] [ 26.126] (II) LoadModule: "intel" [ X] [ 26.126440] [ 26.126] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ X] [ 26.126771] [ 26.126] (II) Module intel: vendor="X.Org Foundation" [ X] [ 26.126804] [ 26.126] compiled for 1.19.5, module version = 2.99.917 [ X] [ 26.126817] [ 26.126] Module class: X.Org Video Driver [ X] [ 26.126830] [ 26.126] ABI class: X.Org Video Driver, version 23.0 [ X] [ 26.126851] [ 26.126] (II) LoadModule: "evdev" [ X] [ 26.126897] [ 26.126] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ X] [ 26.127237] [ 26.127] (II) Module evdev: vendor="X.Org Foundation" [ X] [ 26.127267] [ 26.127] compiled for 1.19.1, module version = 2.10.5 [ X] [ 26.127280] [ 26.127] Module class: X.Org XInput Driver [ X] [ 26.127292] [ 26.127] ABI class: X.Org XInput driver, version 24.1 [ X] [ 26.127313] [ 26.127] (II) LoadModule: "kbd" [ X] [ 26.127421] [ 26.127] (WW) Warning, couldn't open module kbd [ X] [ 26.127446] [ 26.127] (II) UnloadModule: "kbd" [ X] [ 26.127459] [ 26.127] (II) Unloading kbd [ X] [ 26.127471] [ 26.127] (EE) Failed to load module "kbd" (module does not exist, 0) [ X] [ 26.127492] [ 26.127] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: [ X] [ 26.127531] i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, [ X] [ 26.127578] 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, [ X] [ 26.127648] Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, [ X] [ 26.127692] GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ X] [ 26.127714] [ 26.127] (II) intel: Driver for Intel(R) HD Graphics [ X] [ 26.127726] [ 26.127] (II) intel: Driver for Intel(R) Iris(TM) Graphics [ X] [ 26.127738] [ 26.127] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics [ X] [ 26.150847] [ 26.150] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20180719 [ X] [ 26.150883] [ 26.150] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20171229-1 (Timo Aaltonen ) [ X] [ 26.150906] [ 26.150] (II) intel(0): SNA compiled for use with valgrind [ X] [ 26.170927] [ 26.170] (II) intel(1): Using Kernel Mode Setting driver: i915, version 1.6.0 20180719 [ X] [ 26.170954] [ 26.170] (II) intel(1): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20171229-1 (Timo Aaltonen ) [ X] [ 26.170979] [ 26.170] (II) intel(1): SNA compiled for use with valgrind [ X] [ 26.170992] [ 26.170] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support [ X] [ 26.171271] [ 26.171] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 2000 [ X] [ 26.171290] [ 26.171] (--) intel(0): CPU: x86, sse2, sse3, ssse3, sse4.1, sse4.2; using a maximum of 1 threads [ X] [ 26.171329] [ 26.171] (**) intel(0): Depth 24, (--) framebuffer bpp 32 [ X] [ 26.171352] [ 26.171] (==) intel(0): RGB weight 888 [ X] [ 26.171365] [ 26.171] (==) intel(0): Default visual is TrueColor [ X] [ 26.171412] [ 26.171] (**) intel(0): Option "ZaphodHeads" "VGA1" [ X] [ 26.171743] [ 26.171] (II) intel(0): Output VGA1 using monitor section Monitor0 [ X] [ 26.171775] [ 26.171] (**) intel(0): Option "PreferredMode" "1920x1080" [ X] [ 26.171933] [ 26.171] (II) intel(0): Enabled output VGA1 [ X] [ 26.171993] [ 26.171] (--) intel(0): Using a maximum size of 256x256 for hardware cursors [ X] [ 26.172178] [ 26.172] (II) intel(0): Output VIRTUAL1 has no monitor section [ X] [ 26.172199] [ 26.172] (II) intel(0): Enabled output VIRTUAL1 [ X] [ 26.172220] [ 26.172] (--) intel(0): Output VGA1 using initial mode 1920x1080 on pipe 0 [ X] [ 26.172310] [ 26.172] (==) intel(0): TearFree disabled [ X] [ 26.172360] [ 26.172] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) [ X] [ 26.172385] [ 26.172] (==) intel(0): DPI set to (96, 96) [ X] [ 26.172398] [ 26.172] (II) Loading sub module "dri3" [ X] [ 26.172420] [ 26.172] (II) LoadModule: "dri3" [ X] [ 26.172433] [ 26.172] (II) Module "dri3" already built-in [ X] [ 26.172455] [ 26.172] (II) Loading sub module "dri2" [ X] [ 26.172468] [ 26.172] (II) LoadModule: "dri2" [ X] [ 26.172481] [ 26.172] (II) Module "dri2" already built-in [ X] [ 26.172492] [ 26.172] (II) Loading sub module "present" [ X] [ 26.172512] [ 26.172] (II) LoadModule: "present" [ X] [ 26.172522] [ 26.172] (II) Module "present" already built-in [ X] [ 26.172753] [ 26.172] (--) intel(1): Integrated Graphics Chipset: Intel(R) HD Graphics 2000 [ X] [ 26.172781] [ 26.172] (--) intel(1): CPU: x86, sse2, sse3, ssse3, sse4.1, sse4.2; using a maximum of 1 threads [ X] [ 26.172804] [ 26.172] (**) intel(1): Depth 24, (--) framebuffer bpp 32 [ X] [ 26.172825] [ 26.172] (==) intel(1): RGB weight 888 [ X] [ 26.172837] [ 26.172] (==) intel(1): Default visual is TrueColor [ X] [ 26.172877] [ 26.172] (**) intel(1): Option "ZaphodHeads" "HDMI1" [ X] [ 26.173144] [ 26.173] (II) intel(1): Output HDMI1 using monitor section Monitor1 [ X] [ 26.173172] [ 26.173] (**) intel(1): Option "PreferredMode" "1920x1080" [ X] [ 26.173320] [ 26.173] (II) intel(1): Enabled output HDMI1 [ X] [ 26.173369] [ 26.173] (--) intel(1): Using a maximum size of 256x256 for hardware cursors [ X] [ 26.173517] [ 26.173] (II) intel(1): Output VIRTUAL1 has no monitor section [ X] [ 26.173546] [ 26.173] (II) intel(1): Enabled output VIRTUAL1 [ X] [ 26.173559] [ 26.173] (--) intel(1): Output HDMI1 using initial mode 1920x1080 on pipe 1 [ X] [ 26.173622] [ 26.173] (==) intel(1): TearFree disabled [ X] [ 26.173675] [ 26.173] (==) intel(1): Using gamma correction (1.0, 1.0, 1.0) [ X] [ 26.173698] [ 26.173] (==) intel(1): DPI set to (96, 96) [ X] [ 26.173711] [ 26.173] (II) Loading sub module "dri3" [ X] [ 26.173735] [ 26.173] (II) LoadModule: "dri3" [ X] [ 26.173747] [ 26.173] (II) Module "dri3" already built-in [ X] [ 26.173759] [ 26.173] (II) Loading sub module "dri2" [ X] [ 26.173780] [ 26.173] (II) LoadModule: "dri2" [ X] [ 26.173792] [ 26.173] (II) Module "dri2" already built-in [ X] [ 26.173803] [ 26.173] (II) Loading sub module "present" [ X] [ 26.173813] [ 26.173] (II) LoadModule: "present" [ X] [ 26.173832] [ 26.173] (II) Module "present" already built-in [ X] [ 26.173843] [ 26.173] (==) Depth 24 pixmap format is 32 bpp [ X] [ 26.174130] [ 26.174] (II) intel(0): SNA initialized with Sandybridge (gen6, gt1) backend [ X] [ 26.174158] [ 26.174] (==) intel(0): Backing store enabled [ X] [ 26.174171] [ 26.174] (==) intel(0): Silken mouse enabled [ X] [ 26.174192] [ 26.174] (II) intel(0): HW Cursor enabled [ X] [ 26.174212] [ 26.174] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ X] [ 26.174387] [ 26.174] (==) intel(0): DPMS enabled [ X] [ 26.174517] [ 26.174] (==) intel(0): Display hotplug detection enabled [ X] [ 26.174598] [ 26.174] (II) intel(0): [DRI2] Setup complete [ X] [ 26.174624] [ 26.174] (II) intel(0): [DRI2] DRI driver: i965 [ X] [ 26.174637] [ 26.174] (II) intel(0): [DRI2] VDPAU driver: va_gl [ X] [ 26.174648] [ 26.174] (II) intel(0): direct rendering: DRI2 enabled [ X] [ 26.174669] [ 26.174] (II) intel(0): hardware support for Present enabled [ X] [ 26.174702] [ 26.174] (WW) intel(0): Option "PreferredMode" is not used [ X] [ 26.174714] [ 26.174] (--) RandR disabled [ X] [ 26.174904] [ 26.174] (II) intel(1): SNA initialized with Sandybridge (gen6, gt1) backend [ X] [ 26.174931] [ 26.174] (==) intel(1): Backing store enabled [ X] [ 26.174945] [ 26.174] (==) intel(1): Silken mouse enabled [ X] [ 26.174966] [ 26.174] (II) intel(1): HW Cursor enabled [ X] [ 26.174978] [ 26.174] (II) intel(1): RandR 1.2 enabled, ignore the following RandR disabled message. [ X] [ 26.175133] [ 26.175] (==) intel(1): DPMS enabled [ X] [ 26.175257] [ 26.175] (==) intel(1): Display hotplug detection enabled [ X] [ 26.175308] [ 26.175] (II) intel(1): [DRI2] Setup complete [ X] [ 26.175332] [ 26.175] (II) intel(1): [DRI2] DRI driver: i965 [ X] [ 26.175346] [ 26.175] (II) intel(1): [DRI2] VDPAU driver: va_gl [ X] [ 26.175358] [ 26.175] (II) intel(1): direct rendering: DRI2 enabled [ X] [ 26.175378] [ 26.175] (II) intel(1): hardware support for Present enabled [ X] [ 26.175391] [ 26.175] (WW) intel(1): Option "PreferredMode" is not used [ X] [ 26.175407] [ 26.175] (--) RandR disabled [ X] [ 26.183007] [ 26.182] (II) SELinux: Disabled on system [ X] [ 26.187932] [ 26.187] (II) intel(0): switch to mode 1920x1080@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ X] [ 26.204746] [ 26.204] (II) intel(0): Setting screen physical size to 507 x 285 [ X] [ 26.208509] [ 26.208] (II) intel(1): switch to mode 1920x1080@60.0 on HDMI1 using pipe 1, position (0, 0), rotation normal, reflection none [ X] [ 26.224907] [ 26.224] (II) intel(1): Setting screen physical size to 507 x 285 [ X] [ 26.259842] [ 26.259] (II) Using input driver 'evdev' for 'Mouse0' [ X] [ 26.259890] [ 26.259] (**) Option "SendCoreEvents" "on" [ X] [ 26.259903] [ 26.259] (**) Option "CorePointer" "on" [ X] [ 26.259915] [ 26.259] (**) Mouse0: always reports core events [ X] [ 26.259935] [ 26.259] (**) evdev: Mouse0: Device: "/dev/input/event9" [ X] [ 26.260062] [ 26.260] (--) evdev: Mouse0: Vendor 0x1395 Product 0x35 [ X] [ 26.260089] [ 26.260] (--) evdev: Mouse0: Found 1 mouse buttons [ X] [ 26.260101] [ 26.260] (--) evdev: Mouse0: Found absolute axes [ X] [ 26.260113] [ 26.260] (II) evdev: Mouse0: Forcing absolute x/y axes to exist. [ X] [ 26.260133] [ 26.260] (II) evdev: Mouse0: Forcing relative x/y axes to exist. [ X] [ 26.260154] [ 26.260] (II) evdev: Mouse0: Configuring as mouse [ X] [ 26.260175] [ 26.260] (**) evdev: Mouse0: YAxisMapping: buttons 4 and 5 [ X] [ 26.260195] [ 26.260] (**) evdev: Mouse0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ X] [ 26.260216] [ 26.260] (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE, id 6) [ X] [ 26.260317] [ 26.260] (II) evdev: Mouse0: initialized for absolute axes. [ X] [ 26.260635] [ 26.260] (**) Mouse0: (accel) keeping acceleration scheme 1 [ X] [ 26.260662] [ 26.260] (**) Mouse0: (accel) acceleration profile 0 [ X] [ 26.260685] [ 26.260] (**) Mouse0: (accel) acceleration factor: 2.000 [ X] [ 26.260708] [ 26.260] (**) Mouse0: (accel) acceleration threshold: 4 [ X] [ 26.260796] [ 26.260] (II) Using input driver 'evdev' for 'Keyboard0' [ X] [ 26.260822] [ 26.260] (**) Option "SendCoreEvents" "on" [ X] [ 26.260842] [ 26.260] (**) Keyboard0: always reports core events [ X] [ 26.260863] [ 26.260] (**) evdev: Keyboard0: Device: "/dev/input/event8" [ X] [ 26.260938] [ 26.260] (--) evdev: Keyboard0: Vendor 0x1395 Product 0x35 [ X] [ 26.260961] [ 26.260] (--) evdev: Keyboard0: Found 1 mouse buttons [ X] [ 26.260981] [ 26.260] (--) evdev: Keyboard0: Found keys [ X] [ 26.260994] [ 26.260] (II) evdev: Keyboard0: Forcing relative x/y axes to exist. [ X] [ 26.261016] [ 26.260] (II) evdev: Keyboard0: Configuring as mouse [ X] [ 26.261028] [ 26.260] (II) evdev: Keyboard0: Configuring as keyboard [ X] [ 26.261050] [ 26.261] (**) evdev: Keyboard0: YAxisMapping: buttons 4 and 5 [ X] [ 26.261063] [ 26.261] (**) evdev: Keyboard0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ X] [ 26.261084] [ 26.261] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD, id 7) [ X] [ 26.261096] [ 26.261] (**) Option "xkb_rules" "evdev" [ X] [ 26.261115] [ 26.261] (**) Option "xkb_layout" "us" [ X] [ 26.293093] [ 26.293] (II) Using input driver 'evdev' for 'Keyboard1' [ X] [ 26.293136] [ 26.293] (**) Option "SendCoreEvents" "on" [ X] [ 26.293155] [ 26.293] (**) Keyboard1: always reports core events [ X] [ 26.293167] [ 26.293] (**) evdev: Keyboard1: Device: "/dev/input/event7" [ X] [ 26.293232] [ 26.293] (--) evdev: Keyboard1: Vendor 0x1395 Product 0x35 [ X] [ 26.293255] [ 26.293] (--) evdev: Keyboard1: Found keys [ X] [ 26.293269] [ 26.293] (II) evdev: Keyboard1: Configuring as keyboard [ X] [ 26.293289] [ 26.293] (II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD, id 8) [ X] [ 26.293310] [ 26.293] (**) Option "xkb_rules" "evdev" [ X] [ 26.293330] [ 26.293] (**) Option "xkb_layout" "us" [ X] [ 26.293683] [ 26.293] (II) Using input driver 'evdev' for 'Mouse1' [ X] [ 26.293711] [ 26.293] (**) Option "SendCoreEvents" "on" [ X] [ 26.293732] [ 26.293] (**) Mouse1: always reports core events [ X] [ 26.293745] [ 26.293] (**) evdev: Mouse1: Device: "/dev/input/event6" [ X] [ 26.293823] [ 26.293] (--) evdev: Mouse1: Vendor 0x45e Product 0x40 [ X] [ 26.293846] [ 26.293] (--) evdev: Mouse1: Found 3 mouse buttons [ X] [ 26.293859] [ 26.293] (--) evdev: Mouse1: Found scroll wheel(s) [ X] [ 26.293869] [ 26.293] (--) evdev: Mouse1: Found relative axes [ X] [ 26.293889] [ 26.293] (--) evdev: Mouse1: Found x and y relative axes [ X] [ 26.293901] [ 26.293] (II) evdev: Mouse1: Configuring as mouse [ X] [ 26.293922] [ 26.293] (II) evdev: Mouse1: Adding scrollwheel support [ X] [ 26.293935] [ 26.293] (**) evdev: Mouse1: YAxisMapping: buttons 4 and 5 [ X] [ 26.293955] [ 26.293] (**) evdev: Mouse1: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ X] [ 26.293978] [ 26.293] (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE, id 9) [ X] [ 26.294046] [ 26.294] (II) evdev: Mouse1: initialized for relative axes. [ X] [ 26.294290] [ 26.294] (**) Mouse1: (accel) keeping acceleration scheme 1 [ X] [ 26.294317] [ 26.294] (**) Mouse1: (accel) acceleration profile 0 [ X] [ 26.294346] [ 26.294] (**) Mouse1: (accel) acceleration factor: 2.000 [ X] [ 26.294359] [ 26.294] (**) Mouse1: (accel) acceleration threshold: 4 [ X] [ 26.294423] [ 26.294] (II) Using input driver 'evdev' for 'Keyboard2' [ X] [ 26.294449] [ 26.294] (**) Option "SendCoreEvents" "on" [ X] [ 26.294470] [ 26.294] (**) Keyboard2: always reports core events [ X] [ 26.294491] [ 26.294] (**) evdev: Keyboard2: Device: "/dev/input/event5" [ X] [ 26.294562] [ 26.294] (--) evdev: Keyboard2: Vendor 0x46d Product 0xc31c [ X] [ 26.294585] [ 26.294] (--) evdev: Keyboard2: Found keys [ X] [ 26.294598] [ 26.294] (II) evdev: Keyboard2: Configuring as keyboard [ X] [ 26.294619] [ 26.294] (II) XINPUT: Adding extended input device "Keyboard2" (type: KEYBOARD, id 10) [ X] [ 26.294640] [ 26.294] (**) Option "xkb_rules" "evdev" [ X] [ 26.294660] [ 26.294] (**) Option "xkb_layout" "us" [ X] [ 26.295041] [ 26.295] (II) Using input driver 'evdev' for 'Keyboard3' [ X] [ 26.295069] [ 26.295] (**) Option "SendCoreEvents" "on" [ X] [ 26.295093] [ 26.295] (**) Keyboard3: always reports core events [ X] [ 26.295106] [ 26.295] (**) evdev: Keyboard3: Device: "/dev/input/event4" [ X] [ 26.295179] [ 26.295] (--) evdev: Keyboard3: Vendor 0x46d Product 0xc31c [ X] [ 26.295202] [ 26.295] (--) evdev: Keyboard3: Found absolute axes [ X] [ 26.295215] [ 26.295] (II) evdev: Keyboard3: Forcing absolute x/y axes to exist. [ X] [ 26.295235] [ 26.295] (--) evdev: Keyboard3: Found keys [ X] [ 26.295253] [ 26.295] (II) evdev: Keyboard3: Forcing relative x/y axes to exist. [ X] [ 26.295274] [ 26.295] (II) evdev: Keyboard3: Configuring as mouse [ X] [ 26.295287] [ 26.295] (II) evdev: Keyboard3: Configuring as keyboard [ X] [ 26.295309] [ 26.295] (II) XINPUT: Adding extended input device "Keyboard3" (type: KEYBOARD, id 11) [ X] [ 26.295322] [ 26.295] (**) Option "xkb_rules" "evdev" [ X] [ 26.295343] [ 26.295] (**) Option "xkb_layout" "us" [ X] [ 26.295586] [ 26.295] (II) evdev: Keyboard3: initialized for absolute axes. [ X] [ 26.295743] [ 26.295] (**) Keyboard3: (accel) keeping acceleration scheme 1 [ X] [ 26.295769] [ 26.295] (**) Keyboard3: (accel) acceleration profile 0 [ X] [ 26.295789] [ 26.295] (**) Keyboard3: (accel) acceleration factor: 2.000 [ X] [ 26.295809] [ 26.295] (**) Keyboard3: (accel) acceleration threshold: 4 [ X] [ 26.295873] [ 26.295] (II) Using input driver 'evdev' for 'Keyboard4' [ X] [ 26.295898] [ 26.295] (**) Option "SendCoreEvents" "on" [ X] [ 26.295919] [ 26.295] (**) Keyboard4: always reports core events [ X] [ 26.295940] [ 26.295] (**) evdev: Keyboard4: Device: "/dev/input/event3" [ X] [ 26.296016] [ 26.295] (--) evdev: Keyboard4: Vendor 0x46d Product 0xc31c [ X] [ 26.296040] [ 26.296] (--) evdev: Keyboard4: Found keys [ X] [ 26.296052] [ 26.296] (II) evdev: Keyboard4: Configuring as keyboard [ X] [ 26.296074] [ 26.296] (II) XINPUT: Adding extended input device "Keyboard4" (type: KEYBOARD, id 12) [ X] [ 26.296087] [ 26.296] (**) Option "xkb_rules" "evdev" [ X] [ 26.296107] [ 26.296] (**) Option "xkb_layout" "us" [ X] [ 26.296516] [ 26.296] (II) Using input driver 'evdev' for 'Keyboard5' [ X] [ 26.296545] [ 26.296] (**) Option "SendCoreEvents" "on" [ X] [ 26.296567] [ 26.296] (**) Keyboard5: always reports core events [ X] [ 26.296580] [ 26.296] (**) evdev: Keyboard5: Device: "/dev/input/event1" [ X] [ 26.296654] [ 26.296] (--) evdev: Keyboard5: Vendor 0 Product 0x1 [ X] [ 26.296676] [ 26.296] (--) evdev: Keyboard5: Found keys [ X] [ 26.296689] [ 26.296] (II) evdev: Keyboard5: Configuring as keyboard [ X] [ 26.296710] [ 26.296] (II) XINPUT: Adding extended input device "Keyboard5" (type: KEYBOARD, id 13) [ X] [ 26.296733] [ 26.296] (**) Option "xkb_rules" "evdev" [ X] [ 26.296753] [ 26.296] (**) Option "xkb_layout" "us" [ X] [ 26.297112] [ 26.297] (II) Using input driver 'evdev' for 'Keyboard6' [ X] [ 26.297139] [ 26.297] (**) Option "SendCoreEvents" "on" [ X] [ 26.297161] [ 26.297] (**) Keyboard6: always reports core events [ X] [ 26.297174] [ 26.297] (**) evdev: Keyboard6: Device: "/dev/input/event0" [ X] [ 26.297246] [ 26.297] (--) evdev: Keyboard6: Vendor 0 Product 0x1 [ X] [ 26.297270] [ 26.297] (--) evdev: Keyboard6: Found keys [ X] [ 26.297283] [ 26.297] (II) evdev: Keyboard6: Configuring as keyboard [ X] [ 26.297303] [ 26.297] (II) XINPUT: Adding extended input device "Keyboard6" (type: KEYBOARD, id 14) [ X] [ 26.297324] [ 26.297] (**) Option "xkb_rules" "evdev" [ X] [ 26.297345] [ 26.297] (**) Option "xkb_layout" "us" [ X] [ 26.297687] [ 26.297] (II) Using input driver 'evdev' for 'Mouse0' [ X] [ 26.297715] [ 26.297] (**) Option "SendCoreEvents" "on" [ X] [ 26.297737] [ 26.297] (**) Option "CorePointer" "on" [ X] [ 26.297750] [ 26.297] (**) Mouse0: always reports core events [ X] [ 26.297776] [ 26.297] (**) evdev: Mouse0: Device: "/dev/input/event9" [ X] [ 26.297837] [ 26.297] (WW) evdev: Mouse0: device file is duplicate. Ignoring. [ X] [ 26.314792] [ 26.314] (EE) PreInit returned 8 for "Mouse0" [ X] [ 26.314832] [ 26.314] (II) UnloadModule: "evdev" [ X] [ 26.314856] [ 26.314] (II) LoadModule: "kbd" [ X] [ 26.315025] [ 26.315] (WW) Warning, couldn't open module kbd [ X] [ 26.315042] [ 26.315] (II) UnloadModule: "kbd" [ X] [ 26.315064] [ 26.315] (II) Unloading kbd [ X] [ 26.315076] [ 26.315] (EE) Failed to load module "kbd" (module does not exist, 0) [ X] [ 26.315088] [ 26.315] (EE) No input driver matching `kbd' [ X] [ 26.315100] [ 26.315] (II) Falling back to input driver `libinput' [ X] [ 26.315122] [ 26.315] (II) LoadModule: "libinput" [ X] [ 26.315244] [ 26.315] (WW) Warning, couldn't open module libinput [ X] [ 26.315271] [ 26.315] (II) UnloadModule: "libinput" [ X] [ 26.315284] [ 26.315] (II) Unloading libinput [ X] [ 26.315295] [ 26.315] (EE) Failed to load module "libinput" (module does not exist, 0) [ KERNEL] [ 26.322451] random: Xorg: uninitialized urandom read (16 bytes read) [ X] [ 28.188074] [ 28.188] (II) intel(0): EDID vendor "DEL", prod id 41103 [ X] [ 28.188128] [ 28.188] (II) intel(0): Using hsync ranges from config file [ X] [ 28.188143] [ 28.188] (II) intel(0): Using vrefresh ranges from config file [ X] [ 28.188166] [ 28.188] (II) intel(0): Printing DDC gathered Modelines: [ X] [ 28.188178] [ 28.188] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP) [ X] [ 28.188201] [ 28.188] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ X] [ 28.188214] [ 28.188] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ X] [ 28.188236] [ 28.188] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ X] [ 28.188248] [ 28.188] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ X] [ 28.188270] [ 28.188] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ X] [ 28.188282] [ 28.188] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ X] [ 28.188303] [ 28.188] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ X] [ 28.188316] [ 28.188] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ X] [ 28.188338] [ 28.188] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ X] [ 28.188351] [ 28.188] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ X] [ 28.188372] [ 28.188] (II) intel(0): Modeline "1600x900"x60.0 119.00 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz e) [ X] [ 28.188384] [ 28.188] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e) [ X] [ 28.203406] [ 28.203] (II) intel(1): EDID vendor "DEL", prod id 41104 [ X] [ 28.203447] [ 28.203] (II) intel(1): Using hsync ranges from config file [ X] [ 28.203462] [ 28.203] (II) intel(1): Using vrefresh ranges from config file [ X] [ 28.203492] [ 28.203] (II) intel(1): Printing DDC gathered Modelines: [ X] [ 28.203505] [ 28.203] (II) intel(1): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP) [ X] [ 28.203527] [ 28.203] (II) intel(1): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ X] [ 28.203541] [ 28.203] (II) intel(1): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ X] [ 28.203561] [ 28.203] (II) intel(1): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ X] [ 28.203574] [ 28.203] (II) intel(1): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ X] [ 28.203595] [ 28.203] (II) intel(1): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ X] [ 28.203608] [ 28.203] (II) intel(1): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ X] [ 28.203630] [ 28.203] (II) intel(1): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ X] [ 28.203643] [ 28.203] (II) intel(1): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ X] [ 28.203663] [ 28.203] (II) intel(1): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ X] [ 28.203676] [ 28.203] (II) intel(1): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ X] [ 28.203696] [ 28.203] (II) intel(1): Modeline "1600x900"x60.0 119.00 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz e) [ X] [ 28.203709] [ 28.203] (II) intel(1): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e) [ gm] [ 31.216649] RANDR 1.5. [ gm] [ 31.216762] VGA1: display 480x270mm. [ gm] [ 31.216933] VIRTUAL1: no display found. [ KERNEL] [ 31.238892] random: crng init done [ KERNEL] [ 31.238898] random: 4 urandom warning(s) missed due to ratelimiting [ gm] [ 31.236649] DPMS enabled. [ gm] [ 31.256380] DPMS enabled. [ gm] [ 31.256472] Allocate 81920 bytes of shared memory for X imgbuf. [ gm] [ 31.256669] Allocate 81920 bytes of shared memory for X imgbuf. [ gm] [ 31.257079] Use /lib/ui32.so. [ gm] [ 31.258725] Allocate 8017920 bytes of shared memory for X imgbuf. [ gm] [ 31.265057] Allocate 8017920 bytes of shared memory for X imgbuf. [ gm] [ 31.293501] Unpack /bootmedia/packages/alsa. [ gm] [ 31.488051] Unpack /bootmedia/packages/alsalib. [ gm] [ 31.495636] Unpack /bootmedia/packages/alsalib6. [ gm] [ 31.611973] modprobe snd-hda-codec-analog. [ gm] [ 31.620246] modprobe snd-hda-codec-ca0110. [ gm] [ 31.626010] modprobe snd-hda-codec-ca0132. [ gm] [ 31.629527] modprobe snd-hda-codec-cirrus. [ gm] [ 31.633214] modprobe snd-hda-codec-cmedia. [ gm] [ 31.636567] modprobe snd-hda-codec-conexant. [ gm] [ 31.640046] modprobe snd-hda-codec-generic. [ gm] [ 31.642954] modprobe snd-hda-codec-hdmi. [ gm] [ 31.645623] modprobe snd-hda-codec-idt. [ gm] [ 31.649349] modprobe snd-hda-codec-realtek. [ gm] [ 31.653113] modprobe snd-hda-codec-via. [ gm] [ 31.656725] modprobe snd-hda-intel. [ gm] [ 31.660685] modprobe snd-usb-audio. [ KERNEL] [ 31.727241] usb 2-1.3: Warning! Unlikely big volume range (=4096), cval->res is probably wrong. [ KERNEL] [ 31.727249] usb 2-1.3: [11] FU [Sidetone Playback Volume] ch = 1, val = 0/4096/1 /--- FILE "/proc/asound/devices" ----------------------- | 2: [ 0- 0]: digital audio playback | 3: [ 0- 0]: digital audio capture | 4: [ 0] : control | 33: : timer \---------------------------------------------------- [ KERNEL] [ 31.734776] usbcore: registered new interface driver snd-usb-audio [ pfac] [ 31.733595] Run /sbin/rdpsnd sndvol 100 100 50. [ gm] [ 31.733622] /dev/snd/controlC0 character device. [ pfac] [ 31.733653] Ok, PID 1061. [ gm] [ 31.733668] /dev/snd/pcmC0D0c character device. [ pfac] [ 31.733704] Run /sbin/rdpsnd 1 0 100 0 -1. [ gm] [ 31.733720] /dev/snd/pcmC0D0p character device. [ pfac] [ 31.733746] Ok, PID 1062. [ gm] [ 31.733761] /dev/snd/timer character device. [ gm] [ 31.733789] Preconfigure ALSA. [ gm] [ 31.733814] Run '/sbin/rdpsnd sndvol 100 100 50', log '', env '', pid ''. [ gm] [ 31.733841] Run sound daemon. [ gm] [ 31.733866] Run '/sbin/rdpsnd 1 0 100 0 -1', log '', env '', pid ''. [ gm] [ 31.733893] [TFTP] Download config file Everyone/contacts.txt from . [ gm] [ 31.735288] [SIP] 5 contacts from 'contacts.txt'. [ gm] [ 31.735327] [TFTP] Download config file Everyone/linphone.wtc from . /--- FILE "/.linphonerc" ----------------------- | [sip] | media_encryption=srtp | use_ipv6=0 | [rtp] | audio_rtp_port=5004 | video_rtp_port=0 | nortp_timeout=0 | audio_jitt_comp=60 | video_jitt_comp=60 | audio_adaptive_jitt_comp_enabled=1 | video_adaptive_jitt_comp_enabled=1 | [video] | enabled=0 | show_local=0 | [audio_codec_0] | mime=opus | rate=8000 | channels=1 | enabled=1 | [audio_codec_1] | mime=speex | rate=8000 | channels=1 | enabled=1 | [audio_codec_2] | mime=PCMU | rate=8000 | enabled=1 | [audio_codec_5] | mime=1015 | rate=8000 | enabled=1 | [sound] | ringer_dev_id=ALSA: Sennheiser SC60 Control | playback_dev_id=ALSA: Sennheiser SC60 Control | capture_dev_id=ALSA: Sennheiser SC60 Control \---------------------------------------------------- [ gm] [ 31.736993] Unpack /bootmedia/packages/linphone. [ rdpsnd] [ 31.737730] RDP Sound Redirector, WTware 5.8.40. [ rdpsnd] [ 31.739456] Card 'Control'/'Sennheiser Sennheiser SC60 Control at usb-0000:00:1d.0-1.3, full speed'. [ rdpsnd] [ 31.739499] Mixer name: 'USB Mixer'. [ rdpsnd] [ 31.739528] Components: 'USB1395:0035'. [ rdpsnd] [ 31.739555] Controls: 9. [ rdpsnd] [ 31.739585] ALSA: control 'Capture Channel Map'. [ rdpsnd] [ 31.739611] ALSA: control 'Playback Channel Map'. [ rdpsnd] [ 31.739637] ALSA: control 'Mic Capture Switch'. [ rdpsnd] [ 31.739663] ALSA: control 'Mic Capture Volume'. [ rdpsnd] [ 31.739689] ALSA: control 'Sidetone Playback Switch'. [ rdpsnd] [ 31.739715] ALSA: control 'Sidetone Playback Volume'. [ rdpsnd] [ 31.739743] ALSA: control 'Speaker Playback Switch'. [ rdpsnd] [ 31.739842] ALSA: control 'Speaker Playback Volume'. [ rdpsnd] [ 31.740464] ALSA: control 'Keep Interface'. [ sndvol] [ 31.742739] Card 'Control'/'Sennheiser Sennheiser SC60 Control at usb-0000:00:1d.0-1.3, full speed'. [ sndvol] [ 31.742783] Mixer name: 'USB Mixer'. [ sndvol] [ 31.742812] Components: 'USB1395:0035'. [ sndvol] [ 31.742835] Controls: 9. [ sndvol] [ 31.742854] ALSA: control 'Capture Channel Map'. [ sndvol] [ 31.742872] ALSA: control 'Playback Channel Map'. [ sndvol] [ 31.742890] ALSA: control 'Mic Capture Switch'. [ sndvol] [ 31.742953] ALSA: control 'Mic Capture Volume'. [ sndvol] [ 31.743222] ALSA: control 'Sidetone Playback Switch'. [ sndvol] [ 31.743263] ALSA: control 'Sidetone Playback Volume'. [ sndvol] [ 31.743291] ALSA: control 'Speaker Playback Switch'. [ sndvol] [ 31.743319] ALSA: control 'Speaker Playback Volume'. [ sndvol] [ 31.743353] ALSA: control 'Keep Interface'. [ pfac] [ 31.743677] Process pid 1061 terminated, status 00000000. [ gm] [ 32.479232] /usr/lib/i386-linux-gnu/libgsm.so.1 already exist. Overwrite. [ gm] [ 32.517881] /usr/lib/i386-linux-gnu/libsqlite3.so.0 already exist. Overwrite. [ gm] [ 32.642039] /usr/lib/i386-linux-gnu/libopus.so.0 already exist. Overwrite. [ gm] [ 32.766988] /usr/lib/i386-linux-gnu/sse2/libspeex.so.1 already exist. Overwrite. [ gm] [ 32.800214] Run '/usr/local/bin/linphonec -l /tmp/linphone.out --pipe', log '/tmp/linphone.out', env '', pid ''. [ pfac] [ 32.800265] Run /usr/local/bin/linphonec -l /tmp/linphone.out --pipe. [ pfac] [ 32.800325] Ok, PID 1063. [ KERNEL] [ 32.803892] zram0: detected capacity change from 0 to 1073741824 [ gm] [ 32.806205] Unpack /bootmedia/packages/chprf. [ KERNEL] [ 32.808253] Adding 1048572k swap on /dev/zram0. Priority:-2 extents:1 across:1048572k SS [ SIP] [ 32.921534] 2018-12-20 17:28:30:410 belle-sip-error-Cannot create UDP socket: Address family not supported by protocol [ SIP] [ 32.921561] Warning: Could not start udp transport on port 5060, maybe this port is already used. [ SIP] [ 32.923468] 2018-12-20 17:28:30:412 belle-sip-error-Cannot create TCP socket: Address family not supported by protocol [ SIP] [ 32.923494] Warning: Could not start tcp transport on port 5060, maybe this port is already used. [ SIP] [ 32.929608] 2018-12-20 17:28:30:414 belle-sip-error-Cannot create TCP socket: Address family not supported by protocol [ SIP] [ 32.929637] Ready [ SIP] [ 32.929650] Warning: video is disabled in linphonec, use -V or -C or -D to enable. [ SIP] [ 32.932193] linphonec> 2018-12-20 17:28:30:421 bctbx-error-get_local_ip_for_with_connect() could not create [AF_INET6] socket: Address family not supported by protocol [ SIP] [ 32.934147] 2018-12-20 17:28:30:423 bctbx-error-get_local_ip_for_with_connect() could not create [AF_INET6] socket: Address family not supported by protocol [ gm] [ 33.742098] Unpack /bootmedia/packages/chrome. [ SIP] [ 37.523211] 2018-12-20 17:28:35:012 bctbx-error-get_local_ip_for_with_connect() could not create [AF_INET6] socket: Address family not supported by protocol [ SIP] [ 42.532935] 2018-12-20 17:28:40:022 bctbx-error-get_local_ip_for_with_connect() could not create [AF_INET6] socket: Address family not supported by protocol [ gm] [ 47.073914] Nobody can control terminal by VNC. [ gm] [ 47.073971] [SIP] Command: 'register sip:0000@ 0000'. [ SIP] [ 47.073999] Receiving command 'register sip:0000@ 0000' [ gm] [ 47.078330] [SIP] State 'sip_state_not_running' => 'sip_state_idle'. [ SIP] [ 47.085674] linphonec> Refreshing on sip:0000@... [ SIP] [ 47.174275] linphonec> 2018-12-20 17:28:44:663 belle-sip-error-Could not create socket: Address family not supported by protocol [ SIP] [ 47.174306] 2018-12-20 17:28:44:663 belle-sip-error-Cannot connect to [TLS://:5061] [ SIP] [ 47.194599] Registration on sip: failed: io error [ SIP] [ 47.518024] linphonec> 2018-12-20 17:28:45:007 bctbx-error-get_local_ip_for_with_connect() could not create [AF_INET6] socket: Address family not supported by protocol [ SIP] [ 47.788114] 2018-12-20 17:28:45:277 belle-sip-error-Could not create socket: Address family not supported by protocol [ SIP] [ 47.788144] 2018-12-20 17:28:45:277 belle-sip-error-Cannot connect to [TLS://:5061] [ SIP] [ 47.808409] Registration on sip: failed: io error [ SIP] [ 52.524755] linphonec> 2018-12-20 17:28:50:014 bctbx-error-get_local_ip_for_with_connect() could not create [AF_INET6] socket: Address family not supported by protocol [ SIP] [ 57.522593] 2018-12-20 17:28:55:012 bctbx-error-get_local_ip_for_with_connect() could not create [AF_INET6] socket: Address family not supported by protocol [ SIP] [ 62.520453] 2018-12-20 17:29:00:009 bctbx-error-get_local_ip_for_with_connect() could not create [AF_INET6] socket: Address family not supported by protocol [ gm] [ 66.126428] Allocate 619520 bytes of shared memory for X imgbuf. [ SIP] [ 67.516572] 2018-12-20 17:29:05:006 bctbx-error-get_local_ip_for_with_connect() could not create [AF_INET6] socket: Address family not supported by protocol [ SIP] [ 71.450934] Receiving command 'call *921424' [ SIP] [ 71.466063] 2018-12-20 17:29:08:955 bctbx-error-get_local_ip_for_with_connect() could not create [AF_INET6] socket: Address family not supported by protocol [ SIP] [ 71.466104] 2018-12-20 17:29:08:955 liblinphone-error-Unable to get host. No network? [ SIP] [ 71.470555] Establishing call id to sip:*921424@, assigned id 1 [ SIP] [ 71.470959] Contacting sip:*921424@ [ SIP] [ 71.472070] linphonec> Call 1 to sip:*921424@ in progress. [ gm] [ 71.472158] [SIP] Command 'call *921424': 'Establishing call id to sip:*921424@, assigned id 1' [ gm] [ 71.472193] [SIP] Command 'call *921424': 'Call 1 to sip:*921424@ in progress.' [ gm] [ 71.472568] [SIP] LinphoneCallOutgoingInit, id 1. [ gm] [ 71.472609] [SIP] LinphoneCallOutgoingProgress, id 1. [ gm] [ 71.472637] [SIP] State 'sip_state_idle' => 'sip_state_ringing'. [ SIP] [ 71.560731] linphonec> 2018-12-20 17:29:09:050 belle-sip-error-Could not create socket: Address family not supported by protocol [ SIP] [ 71.560761] 2018-12-20 17:29:09:050 belle-sip-error-Cannot connect to [TLS://:5061] [ SIP] [ 71.580968] Call failed. [ SIP] [ 71.591005] linphonec> Call 1 with sip:*921424@ error. [ gm] [ 71.591071] [SIP] LinphoneCallError, id 1. [ gm] [ 71.591106] [SIP] State 'sip_state_ringing' => 'sip_state_idle'. [ gm] [ 71.591234] [SIP] LinphoneCallReleased, id 1. [ SIP] [ 72.519126] 2018-12-20 17:29:10:008 bctbx-error-get_local_ip_for_with_connect() could not create [AF_INET6] socket: Address family not supported by protocol [ SIP] [ 77.516894] 2018-12-20 17:29:15:006 bctbx-error-get_local_ip_for_with_connect() could not create [AF_INET6] socket: Address family not supported by protocol