WTware 5.6.13/RPi supervisor. [ KERNEL] [ 0.000000] Booting Linux on physical CPU 0x0 [ KERNEL] [ 0.000000] Linux version 4.9.40 (aka@c12) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #12 SMP Tue Aug 15 13:53:17 +04 2017 [ KERNEL] [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ KERNEL] [ 0.000000] CPU: div instructions available: patching division code [ KERNEL] [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ KERNEL] [ 0.000000] OF: fdt:Machine model: Raspberry Pi 3 Model B Rev 1.2 [ KERNEL] [ 0.000000] cma: Reserved 8 MiB at 0x3a800000 [ KERNEL] [ 0.000000] Memory policy: Data cache writealloc [ KERNEL] [ 0.000000] On node 0 totalpages: 241664 [ KERNEL] [ 0.000000] free_area_init_node: node 0, pgdat 80b22f40, node_mem_map b9faa000 [ KERNEL] [ 0.000000] Normal zone: 2124 pages used for memmap [ KERNEL] [ 0.000000] Normal zone: 0 pages reserved [ KERNEL] [ 0.000000] Normal zone: 241664 pages, LIFO batch:31 [ KERNEL] [ 0.000000] percpu: Embedded 11 pages/cpu @b9f70000 s16076 r8192 d20788 u45056 [ KERNEL] [ 0.000000] pcpu-alloc: s16076 r8192 d20788 u45056 alloc=11*4096 [ KERNEL] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ KERNEL] [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 239540 [ KERNEL] [ 0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbdepth=32 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 quiet wtboot=mmc [ KERNEL] [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ KERNEL] [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ KERNEL] [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ KERNEL] [ 0.000000] Memory: 938116K/966656K available (5120K kernel code, 143K rwdata, 916K rodata, 4096K init, 373K bss, 20348K reserved, 8192K cma-reserved) [ KERNEL] [ 0.000000] Virtual kernel memory layout: [ KERNEL] [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ KERNEL] [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ KERNEL] [ 0.000000] vmalloc : 0xbb800000 - 0xff800000 (1088 MB) [ KERNEL] [ 0.000000] lowmem : 0x80000000 - 0xbb000000 ( 944 MB) [ KERNEL] [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB) [ KERNEL] [ 0.000000] .text : 0x80008000 - 0x80600000 (6112 kB) [ KERNEL] [ 0.000000] .init : 0x80700000 - 0x80b00000 (4096 kB) [ KERNEL] [ 0.000000] .data : 0x80b00000 - 0x80b23fd8 ( 144 kB) [ KERNEL] [ 0.000000] .bss : 0x80b25000 - 0x80b82660 ( 374 kB) [ KERNEL] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ KERNEL] [ 0.000000] Hierarchical RCU implementation. [ KERNEL] [ 0.000000] Build-time adjustment of leaf fanout to 32. [ KERNEL] [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ KERNEL] [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ KERNEL] [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ KERNEL] [ 0.000008] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ KERNEL] [ 0.000019] Switching to timer-based delay loop, resolution 52ns [ KERNEL] [ 0.000242] Console: colour dummy device 80x30 [ KERNEL] [ 0.000261] console [tty0] enabled [ KERNEL] [ 0.000280] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ KERNEL] [ 0.000295] pid_max: default: 32768 minimum: 301 [ KERNEL] [ 0.000445] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ KERNEL] [ 0.000453] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ KERNEL] [ 0.001316] Disabling cpuset control group subsystem [ KERNEL] [ 0.001442] CPU: Testing write buffer coherency: ok [ KERNEL] [ 0.001883] CPU0: update cpu_capacity 1024 [ KERNEL] [ 0.001890] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ KERNEL] [ 0.001939] Setting up static identity map for 0x100000 - 0x100034 [ KERNEL] [ 0.003642] CPU1: update cpu_capacity 1024 [ KERNEL] [ 0.003649] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ KERNEL] [ 0.004211] CPU2: update cpu_capacity 1024 [ KERNEL] [ 0.004217] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ KERNEL] [ 0.004761] CPU3: update cpu_capacity 1024 [ KERNEL] [ 0.004767] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ KERNEL] [ 0.004840] Brought up 4 CPUs [ KERNEL] [ 0.004850] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ KERNEL] [ 0.004854] CPU: All CPU(s) started in HYP mode. [ KERNEL] [ 0.004857] CPU: Virtualization extensions available. [ KERNEL] [ 0.005387] devtmpfs: initialized [ KERNEL] [ 0.014936] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 [ KERNEL] [ 0.015319] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ KERNEL] [ 0.015334] futex hash table entries: 1024 (order: 4, 65536 bytes) [ KERNEL] [ 0.015812] pinctrl core: initialized pinctrl subsystem [ KERNEL] [ 0.016341] NET: Registered protocol family 16 [ KERNEL] [ 0.018173] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ KERNEL] [ 0.028304] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ KERNEL] [ 0.111174] bcm2835-dma 3f007000.dma: DMA legacy API manager at bb80f000, dmachans=0x1 [ KERNEL] [ 0.113523] usbcore: registered new interface driver usbfs [ KERNEL] [ 0.113651] usbcore: registered new interface driver hub [ KERNEL] [ 0.113737] usbcore: registered new device driver usb [ KERNEL] [ 0.120120] raspberrypi-firmware soc:firmware: Attached to firmware from 2017-07-21 23:56 [ KERNEL] [ 0.122383] clocksource: Switched to clocksource arch_sys_counter [ KERNEL] [ 0.137276] NET: Registered protocol family 2 [ KERNEL] [ 0.137851] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ KERNEL] [ 0.137959] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ KERNEL] [ 0.138142] TCP: Hash tables configured (established 8192 bind 8192) [ KERNEL] [ 0.138227] UDP hash table entries: 512 (order: 2, 16384 bytes) [ KERNEL] [ 0.138268] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ KERNEL] [ 0.138446] NET: Registered protocol family 1 [ KERNEL] [ 2.224484] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ KERNEL] [ 2.262528] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ KERNEL] [ 2.262539] io scheduler noop registered [ KERNEL] [ 2.262544] io scheduler deadline registered (default) [ KERNEL] [ 2.271644] BCM2708FB: allocated DMA memory fa910000 [ KERNEL] [ 2.271708] BCM2708FB: allocated DMA channel 0 @ bb80f000 [ KERNEL] [ 2.330452] Console: switching to colour frame buffer device 240x67 [ KERNEL] [ 2.367915] bcm2835-rng 3f104000.rng: hwrng registered [ KERNEL] [ 2.368129] vc-cma: Videocore CMA driver [ KERNEL] [ 2.368137] vc-cma: vc_cma_base = 0x00000000 [ KERNEL] [ 2.368143] vc-cma: vc_cma_size = 0x00000000 (0 MiB) [ KERNEL] [ 2.368147] vc-cma: vc_cma_initial = 0x00000000 (0 MiB) [ KERNEL] [ 2.368523] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB) [ KERNEL] [ 2.374551] zram: Added device: zram0 [ KERNEL] [ 2.374590] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ KERNEL] [ 2.602695] Core Release: 2.80a [ KERNEL] [ 2.602705] Setting default values for core params [ KERNEL] [ 2.602732] Finished setting default values for core params [ KERNEL] [ 2.803091] Using Buffer DMA mode [ KERNEL] [ 2.803096] Periodic Transfer Interrupt Enhancement - disabled [ KERNEL] [ 2.803100] Multiprocessor Interrupt Enhancement - disabled [ KERNEL] [ 2.803105] OTG VER PARAM: 0, OTG VER FLAG: 0 [ KERNEL] [ 2.803116] Dedicated Tx FIFOs mode [ KERNEL] [ 2.803587] WARN::dwc_otg_hcd_init:1032: FIQ DMA bounce buffers: virt = 0xba904000 dma = 0xfa904000 len=9024 [ KERNEL] [ 2.803612] FIQ FSM acceleration enabled for : [ KERNEL] [ 2.803612] Non-periodic Split Transactions [ KERNEL] [ 2.803612] Periodic Split Transactions [ KERNEL] [ 2.803612] High-Speed Isochronous Endpoints [ KERNEL] [ 2.803612] Interrupt/Control Split Transaction hack enabled [ KERNEL] [ 2.803618] dwc_otg: Microframe scheduler enabled [ KERNEL] [ 2.803666] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x803940ac [ KERNEL] [ 2.803675] WARN::hcd_init_fiq:460: FIQ ASM at 0x80394410 length 36 [ KERNEL] [ 2.803684] WARN::hcd_init_fiq:486: MPHI regs_base at 0xbb925000 [ KERNEL] [ 2.803741] dwc_otg 3f980000.usb: DWC OTG Controller [ KERNEL] [ 2.803775] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ KERNEL] [ 2.803807] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000 [ KERNEL] [ 2.803853] Init: Port Power? op_state=1 [ KERNEL] [ 2.803856] Init: Power Port (0) [ KERNEL] [ 2.804038] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ KERNEL] [ 2.804048] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ KERNEL] [ 2.804055] usb usb1: Product: DWC OTG Controller [ KERNEL] [ 2.804062] usb usb1: Manufacturer: Linux 4.9.40 dwc_otg_hcd [ KERNEL] [ 2.804069] usb usb1: SerialNumber: 3f980000.usb [ KERNEL] [ 2.804832] hub 1-0:1.0: USB hub found [ KERNEL] [ 2.804870] hub 1-0:1.0: 1 port detected [ KERNEL] [ 2.805545] dwc_otg: FIQ enabled [ KERNEL] [ 2.805549] dwc_otg: NAK holdoff enabled [ KERNEL] [ 2.805553] dwc_otg: FIQ split-transaction FSM enabled [ KERNEL] [ 2.805566] Module dwc_common_port init [ KERNEL] [ 2.805963] usbcore: registered new interface driver usbtouchscreen [ KERNEL] [ 2.807249] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer [ KERNEL] [ 2.807699] bcm2835-cpufreq: min=600000 max=1200000 [ KERNEL] [ 2.808913] sdhost-bcm2835 3f202000.sdhost: could not get clk, deferring probe [ KERNEL] [ 2.811410] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe [ KERNEL] [ 2.816448] ledtrig-cpu: registered to indicate activity on CPUs [ KERNEL] [ 2.816946] hidraw: raw HID events driver (C) Jiri Kosina [ KERNEL] [ 2.819963] usbcore: registered new interface driver usbhid [ KERNEL] [ 2.819975] usbhid: USB HID core driver [ KERNEL] [ 2.823699] vchiq: vchiq_init_state: slot_zero = 0xba980000, is_master = 0 [ KERNEL] [ 2.834102] NET: Registered protocol family 17 [ KERNEL] [ 2.834359] Registering SWP/SWPB emulation handler [ KERNEL] [ 2.835662] registered taskstats version 1 [ KERNEL] [ 2.836051] vc-sm: Videocore shared memory driver [ KERNEL] [ 2.836067] [vc_sm_connected_init]: start [ KERNEL] [ 2.843788] [vc_sm_connected_init]: end - returning 0 [ KERNEL] [ 2.850794] sdhost: log_buf @ ba907000 (fa907000) [ KERNEL] [ 2.932419] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ KERNEL] [ 2.934743] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0 [ KERNEL] [ 2.934750] mmc-bcm2835 3f300000.mmc: DMA channel allocated [ KERNEL] [ 3.002476] of_cfs_init [ KERNEL] [ 3.002556] of_cfs_init: OK [ KERNEL] [ 3.021166] Freeing unused kernel memory: 4096K (80700000 - 80b00000) [ KERNEL] [ 3.042541] Indeed it is in host mode hprt0 = 00021501 [ KERNEL] [ 3.048102] mmc0: host does not support reading read-only switch, assuming write-enable [ KERNEL] [ 3.051061] mmc0: new high speed SDHC card at address 59b4 [ KERNEL] [ 3.053944] mmcblk0: mmc0:59b4 USD 14.7 GiB [ KERNEL] [ 3.056367] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ KERNEL] [ 3.057908] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ KERNEL] [ 3.059439] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ KERNEL] [ 3.062187] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ KERNEL] [ 3.103820] mmcblk0: p1 [ KERNEL] [ 3.105715] random: fast init done [ hotplug] [ 3.104873] Block device 179:0. No action. [ hotplug] [ 3.105089] Block device 179:1. No action. [ KERNEL] [ 3.161224] mmc1: new high speed SDIO card at address 0001 [ KERNEL] [ 3.242422] usb 1-1: new high-speed USB device number 2 using dwc_otg [ KERNEL] [ 3.242564] Indeed it is in host mode hprt0 = 00001101 [ hotplug] [ 3.277383] Block device 254:0. No action. [ pfac] [ 3.391376] Run /sbin/initrd. [ pfac] [ 3.391937] Ok, PID 607. [ initrd] [ 3.395077] WTware shell 5.6.13/RPi [ initrd] [ 3.439204] HDD/MMC/SD boot. [ KERNEL] [ 3.472685] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 [ KERNEL] [ 3.472694] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ KERNEL] [ 3.477681] hub 1-1:1.0: USB hub found [ KERNEL] [ 3.480117] hub 1-1:1.0: 5 ports detected [ KERNEL] [ 3.792419] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ KERNEL] [ 3.922632] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 [ KERNEL] [ 3.922643] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ KERNEL] [ 4.022427] usb 1-1.2: new low-speed USB device number 4 using dwc_otg [ KERNEL] [ 4.157433] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c05a [ KERNEL] [ 4.157443] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ KERNEL] [ 4.157450] usb 1-1.2: Product: USB Optical Mouse [ KERNEL] [ 4.157457] usb 1-1.2: Manufacturer: Logitech [ KERNEL] [ 4.162866] input: Logitech USB Optical Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C05A.0001/input/input0 [ KERNEL] [ 4.165517] hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-3f980000.usb-1.2/input0 [ KERNEL] [ 4.272410] usb 1-1.3: new low-speed USB device number 5 using dwc_otg [ KERNEL] [ 4.420435] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c31c [ KERNEL] [ 4.420446] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ KERNEL] [ 4.420453] usb 1-1.3: Product: USB Keyboard [ KERNEL] [ 4.420461] usb 1-1.3: Manufacturer: Logitech [ KERNEL] [ 4.440088] input: Logitech USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:046D:C31C.0002/input/input1 [ KERNEL] [ 4.513841] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-3f980000.usb-1.3/input0 [ KERNEL] [ 4.543714] input: Logitech USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C31C.0003/input/input2 [ KERNEL] [ 4.612883] hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-3f980000.usb-1.3/input1 [ KERNEL] [ 4.722410] usb 1-1.4: new high-speed USB device number 6 using dwc_otg [ KERNEL] [ 4.853113] usb 1-1.4: New USB device found, idVendor=0801, idProduct=2234 [ KERNEL] [ 4.853124] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ KERNEL] [ 4.853131] usb 1-1.4: Product: ImageSafe [ KERNEL] [ 4.853139] usb 1-1.4: Manufacturer: MagTek [ KERNEL] [ 4.853146] usb 1-1.4: SerialNumber: ImageSafe001 [ initrd] [ 5.084846] Success: media /dev/mmcblk0p1 mounted to /bootmedia. /--- FILE "/bootmedia/config.txt" ----------------------- | # For more options and information see | # http://www.raspberrypi.org/documentation/configuration/config-txt.md | # Some settings may impact device functionality. See link above for details | # Uncomment if you get no picture on HDMI for a default "safe" mode. | #hdmi_safe=1 | # Uncomment this if your display has a black border of unused pixels visible | # and your display can output without overscan. | disable_overscan=1 | # Uncomment if hdmi display is not detected and composite is being output. | #hdmi_force_hotplug=1 | # Uncomment to force a specific HDMI mode (this will force VGA). | #hdmi_group=1 | #hdmi_mode=1 | # Force the monitor to HDMI mode so that sound will be sent over HDMI cable. | #hdmi_drive=2 | # Uncomment to increase signal to HDMI, if you have interference, blanking, or | # no display. | #config_hdmi_boost=4 | # Uncomment to overclock the arm. 700 MHz is the default. | #arm_freq=800 | disable_splash=1 | #hdmi_group=2 | # 800x600: hdmi_mode=9 | # 1024x768: hdmi_mode=16 | # 1280x1024: hdmi_mode=35 | # 1360x768: hdmi_mode=39 | # 1400x1050: hdmi_mode=42 | # 1440x900: hdmi_mode=47 | # 1600x1200: hdmi_mode=51 | # 1680x1050: hdmi_mode=58 | # 1366x768: hdmi_mode=81 | # 1920x1080: hdmi_mode=82 | # 1920x1200: hdmi_mode=69 | framebuffer_depth=32 | # Uncomment for 16-bit color. It is up to two | # times faster than default 32-bit. | #framebuffer_depth=16 | # Enable onboard audio (HDMI or jack). | dtparam=audio=on | # Removes the warning overlay. | #avoid_warnings=1 | # Additionally allows turbo when low-voltage is present. | #avoid_warnings=2 \---------------------------------------------------- [ initrd] [ 5.127804] Start Setup. [ KERNEL] [ 5.152424] usb 1-1.5: new high-speed USB device number 7 using dwc_otg [ KERNEL] [ 5.316330] usb 1-1.5: New USB device found, idVendor=045e, idProduct=0772 [ KERNEL] [ 5.316341] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ KERNEL] [ 5.316349] usb 1-1.5: Product: Microsoft® LifeCam Studio(TM) [ KERNEL] [ 5.316357] usb 1-1.5: Manufacturer: Microsoft [ KERNEL] [ 5.324793] hid-generic 0003:045E:0772.0004: hiddev0,hidraw3: USB HID v1.01 Device [Microsoft Microsoft® LifeCam Studio(TM)] on usb-3f980000.usb-1.5/input4 [ KERNEL] [ 12.217950] random: crng init done [ initrd] [ 13.360331] Remount /bootmedia for writing. [ initrd] [ 38.097393] Remount /bootmedia as read-only. /--- FILE "/bootmedia/configs/initrd.wtc" ----------------------- | clientIP = 192.168.0.158 | netmask = 255.255.255.0 | routerIP = 192.168.0.1 | nameserverIP = 4.2.2.1 | config = local | setupPassword = 472512a160090f040f1268544e732cd7 \---------------------------------------------------- [ initrd] [ 41.752915] Load ethernet drivers. [ initrd] [ 41.752997] modprobe smsc95xx. [ KERNEL] [ 41.762907] smsc95xx v1.0.5 [ KERNEL] [ 41.858242] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:e0:2d:0f [ KERNEL] [ 41.858571] usbcore: registered new interface driver smsc95xx [ KERNEL] [ 41.944259] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ KERNEL] [ 43.523738] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 [ initrd] [ 43.545274] WTpassword present: 472512a160090f040f1268544e732cd7. WTC listener is active. WTC broadcast listener is active. Send broadcast WTCU discover. [ pfac] [ 43.547497] Run /sbin/httpd. [ initrd] [ 43.547574] Run '/sbin/httpd', log '/tmp/httpd.out', env '', pid ''. [ pfac] [ 43.547670] Ok, PID 669. [ httpd] [ 43.552996] HTTP Server, WTware 5.6.13/RPi [ initrd] [ 43.671677] USB: 045e:0772 Microsoft Corp. LifeCam Studio. [ initrd] [ 43.671842] USB: 046d:c31c Logitech, Inc. Keyboard K120. [ initrd] [ 43.671920] USB: 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter. [ initrd] [ 43.671995] USB: 0424:9514 Standard Microsystems Corp. SMC9514 Hub. [ initrd] [ 43.672067] USB: 0801:2234 MagTek. [ initrd] [ 43.672154] USB: 046d:c05a Logitech, Inc. M90/M100 Optical Mouse. [ initrd] [ 43.672225] Copy /bootmedia/configs/config.wtc to /tmp/config.wtc. [ initrd] [ 43.672299] Common local disk config: /--- FILE "/tmp/config.wtc" ----------------------- | [BOM] | server = 192.168.0.233 | usb = 045e:0772 \---------------------------------------------------- /--- FILE "/etc/config.compiled" ----------------------- | [BOM] | server=192.168.0.233 | usb=045e:0772 | connection \---------------------------------------------------- [ initrd] [ 43.673172] Hostname: "wtwB827EBE02D0F". Everyone can control terminal by RSH. RSH: listener is active. Send broadcast WTCU discover. [ initrd] [ 43.677888] Start video wizard. [ httpd] [ 43.677979] Reread settings. [ httpd] [ 43.678113] Everyone can control terminal by HTTP. [ gm] [ 43.682807] WTware session manager 5.6.13/RPi. [ gm] [ 43.683740] Add keyboard event2: Logitech USB Keyboard. [ gm] [ 43.683822] Add keyboard event1: Logitech USB Keyboard. [ gm] [ 43.683896] EV_REL flag found. Add mouse event0: Logitech USB Optical Mouse. [ gm] [ 43.683968] Display mode: 1920x1080, 32 bit, 0 Hz, modeline "", DDC enabled, connector 0. [ gm] [ 43.719152] Framebuffer device found. [ gm] [ 43.719231] LINELENBYTES 7680 [ gm] [ 43.719303] VLEN 8294400 [ gm] [ 43.755432] Use /lib/ui32.so. [ gm] [ 43.755987] Wizard mode, choose server. [ gm] [ 46.264842] Run '/sbin/resolver 0x7eb7086c dns [192.168.0.233]', log '', env '', pid ''. [ pfac] [ 46.265043] Run /sbin/resolver 0x7eb7086c dns [192.168.0.233]. [ pfac] [ 46.265883] Ok, PID 670. [ pfac] [ 46.270387] Process pid 670 terminated, status 00000000. [ gm] [ 46.276377] 192.168.0.233 => 192.168.0.233. [ gm] [ 46.285100] Free ram before fork terminal client /sbin/rdpclient (session 1): 921564 Kb. [ pfac] [ 46.285217] Run /sbin/rdpclient 1. [ gm] [ 46.285265] Run '/sbin/rdpclient 1', log '/tmp/rdpclient.out', env '', pid ''. [ pfac] [ 46.285862] Ok, PID 671. [ rdpclient 671] [ 46.293172] RDP Terminal Client, WTware 5.6.13/RPi, pipe 1, pid 671. [ rdpclient 671] [ 46.293767] Use /lib/ui32.so. [ rdpclient 671] [ 46.295249] Make RDP session with 192.168.0.233, port 3389. [ rdpclient 671] [ 46.295443] No username. [ rdpclient 671] [ 46.295523] No password. [ rdpclient 671] [ 46.295946] No PIN. [ rdpclient 671] [ 46.296032] No domain. [ rdpclient 671] [ 46.296348] No shell. [ rdpclient 671] [ 46.296448] No directory. [ rdpclient 671] [ 46.296528] Window: 1920x1080@24. [ rdpclient 671] [ 46.296607] PFlags 0x0000002F. [ rdpclient 671] [ 46.296686] Keyboard 00000409:00000000. [ rdpclient 671] [ 46.297086] My hostname "wtwB827EBE02D0F". [ rdpclient 671] [ 46.297165] TCP: connecting to 192.168.0.233:3389. [ rdpclient 671] [ 46.297258] TCP: connection with 192.168.0.233:3389 established. [ rdpclient 671] [ 46.297359] Turn keepalive on. [ rdpclient 671] [ 46.298714] Free ram after buffers allocation: 920772 KB. [ rdpclient 671] [ 46.304214] Reconnect with TLS/SSL enabled. [ rdpclient 671] [ 46.304548] TCP: reconnecting to 192.168.0.233:3389. [ rdpclient 671] [ 46.305289] TCP: connection with 192.168.0.233:3389 established. [ rdpclient 671] [ 46.305512] Turn keepalive on. [ rdpclient 671] [ 46.308366] Server supports GFX Pipeline. [ rdpclient 671] [ 46.308483] TLS. [ rdpclient 671] [ 46.308561] SSL/TLS. [ rdpclient 671] [ 46.354966] Enable font smoothing and Desktop Composition. [ rdpclient 671] [ 46.502369] GFX codec. [ rdpclient 671] [ 50.125725] errorInfo 0x00000000. [ rdpclient 671] [ 50.407952] SessionId 0x00000002: DESKTOP-65D8T17\teller. [ rdpclient 671] [ 50.517891] Run 4 tile threads. Home    WTware diskless client.