"display" parameter not working
Posted: Mon Mar 20, 2017 11:46 pm
Hello !!
I have many users connecting to a W2008 Server. All of them have identical settings and i am using identical hardware (raspberry, hdmi/vga conversor) to all of them.
I am having some resolution problem with one (only one) of the users. The resolution for all of the users is set automatically (by wtware maybe) to 1366x768, but in this case i am having 1024x768 no matter what i do. I tried "display" parameter but it seems not to work.
This is the log: (I put bold letter for resolution)
WTware v.5.4.72/RPi supervisor.
WTC listener is active.
WTC broadcast listener is active.
[ KERNEL] [ 0.000000] Booting Linux on physical CPU 0x0
[ KERNEL] [ 0.000000] Initializing cgroup subsys cpuset
[ KERNEL] [ 0.000000] Initializing cgroup subsys cpu
[ KERNEL] [ 0.000000] Initializing cgroup subsys cpuacct
[ KERNEL] [ 0.000000] Linux version 4.4.39 (aka@c12) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #29 SMP Mon Feb 6 16:10:29 +04 2017
[ KERNEL] [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ KERNEL] [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ KERNEL] [ 0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
[ KERNEL] [ 0.000000] cma: Reserved 8 MiB at 0x3a800000
[ KERNEL] [ 0.000000] Memory policy: Data cache writealloc
[ KERNEL] [ 0.000000] On node 0 totalpages: 241664
[ KERNEL] [ 0.000000] free_area_init_node: node 0, pgdat 80915640, node_mem_map b9fa6000
[ KERNEL] [ 0.000000] Normal zone: 2124 pages used for memmap
[ KERNEL] [ 0.000000] Normal zone: 0 pages reserved
[ KERNEL] [ 0.000000] Normal zone: 241664 pages, LIFO batch:31
[ KERNEL] [ 0.000000] [bcm2709_smp_init_cpus] enter (94c0->f3003010)
[ KERNEL] [ 0.000000] [bcm2709_smp_init_cpus] ncores=4
[ KERNEL] [ 0.000000] PERCPU: Embedded 11 pages/cpu @b9f6a000 s13324 r8192 d23540 u45056
[ KERNEL] [ 0.000000] pcpu-alloc: s13324 r8192 d23540 u45056 alloc=11*4096
[ KERNEL] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ KERNEL] [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 239540
[ KERNEL] [ 0.000000] Kernel command line: 8250.nr_uarts=1 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1024 bcm2708_fb.fbheight=768 bcm2709.boardrev=0xa22082 bcm2709.serial=0xd6d0375e smsc95xx.macaddr=B8:27:EB:D0:37:5E bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 bcm2709.uart_clock=48000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 console=ttyAMA0,115200 console=tty1 quiet wtboot=mmc
[ KERNEL] [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ KERNEL] [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ KERNEL] [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ KERNEL] [ 0.000000] Memory: 939208K/966656K available (3807K kernel code, 169K rwdata, 1184K rodata, 4112K init, 365K bss, 19256K reserved, 8192K cma-reserved)
[ KERNEL] [ 0.000000] Virtual kernel memory layout:
[ KERNEL] [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ KERNEL] [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ KERNEL] [ 0.000000] vmalloc : 0xbb800000 - 0xff800000 (1088 MB)
[ KERNEL] [ 0.000000] lowmem : 0x80000000 - 0xbb000000 ( 944 MB)
[ KERNEL] [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
[ KERNEL] [ 0.000000] .text : 0x80008000 - 0x804e7f94 (4992 kB)
[ KERNEL] [ 0.000000] .init : 0x804e8000 - 0x808ec000 (4112 kB)
[ KERNEL] [ 0.000000] .data : 0x808ec000 - 0x80916560 ( 170 kB)
[ KERNEL] [ 0.000000] .bss : 0x80919000 - 0x80974588 ( 366 kB)
[ KERNEL] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ KERNEL] [ 0.000000] Hierarchical RCU implementation.
[ KERNEL] [ 0.000000] Build-time adjustment of leaf fanout to 32.
[ KERNEL] [ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ KERNEL] [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
[ KERNEL] [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ KERNEL] [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ KERNEL] [ 0.000022] Switching to timer-based delay loop, resolution 52ns
[ KERNEL] [ 0.000191] Console: colour dummy device 80x30
[ KERNEL] [ 0.000368] console [tty1] enabled
[ KERNEL] [ 0.000388] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ KERNEL] [ 0.000406] pid_max: default: 32768 minimum: 301
[ KERNEL] [ 0.000522] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ KERNEL] [ 0.000535] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ KERNEL] [ 0.001368] Disabling cpuset control group subsystem
[ KERNEL] [ 0.001395] Initializing cgroup subsys io
[ KERNEL] [ 0.001419] Initializing cgroup subsys memory
[ KERNEL] [ 0.001455] Initializing cgroup subsys devices
[ KERNEL] [ 0.001471] Initializing cgroup subsys freezer
[ KERNEL] [ 0.001509] CPU: Testing write buffer coherency: ok
[ KERNEL] [ 0.001958] CPU0: update cpu_capacity 1024
[ KERNEL] [ 0.001969] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ KERNEL] [ 0.001979] [bcm2709_smp_prepare_cpus] enter
[ KERNEL] [ 0.002054] Setting up static identity map for 0x8240 - 0x8274
[ KERNEL] [ 0.003377] [bcm2709_boot_secondary] cpu:1 started (0) 17
[ KERNEL] [ 0.003568] [bcm2709_secondary_init] enter cpu:1
[ KERNEL] [ 0.003604] CPU1: update cpu_capacity 1024
[ KERNEL] [ 0.003609] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ KERNEL] [ 0.003938] [bcm2709_boot_secondary] cpu:2 started (0) 16
[ KERNEL] [ 0.004079] [bcm2709_secondary_init] enter cpu:2
[ KERNEL] [ 0.004097] CPU2: update cpu_capacity 1024
[ KERNEL] [ 0.004103] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ KERNEL] [ 0.004401] [bcm2709_boot_secondary] cpu:3 started (0) 18
[ KERNEL] [ 0.004530] [bcm2709_secondary_init] enter cpu:3
[ KERNEL] [ 0.004548] CPU3: update cpu_capacity 1024
[ KERNEL] [ 0.004553] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ KERNEL] [ 0.004606] Brought up 4 CPUs
[ KERNEL] [ 0.004628] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ KERNEL] [ 0.004635] CPU: All CPU(s) started in HYP mode.
[ KERNEL] [ 0.004641] CPU: Virtualization extensions available.
[ KERNEL] [ 0.005010] devtmpfs: initialized
[ KERNEL] [ 0.014568] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ KERNEL] [ 0.014902] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ KERNEL] [ 0.015379] pinctrl core: initialized pinctrl subsystem
[ KERNEL] [ 0.015790] NET: Registered protocol family 16
[ KERNEL] [ 0.020752] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[ KERNEL] [ 0.049936] cpuidle: using governor ladder
[ KERNEL] [ 0.079954] cpuidle: using governor menu
[ KERNEL] [ 0.085802] Serial: AMBA PL011 UART driver
[ KERNEL] [ 0.085984] uart-pl011 3f201000.uart: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[ KERNEL] [ 0.086181] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ KERNEL] [ 0.152479] bcm2835-dma 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0x1
[ KERNEL] [ 0.152988] usbcore: registered new interface driver usbfs
[ KERNEL] [ 0.153123] usbcore: registered new interface driver hub
[ KERNEL] [ 0.153214] usbcore: registered new device driver usb
[ KERNEL] [ 0.160130] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-12-09 15:11
[ KERNEL] [ 0.188114] clocksource: Switched to clocksource arch_sys_counter
[ KERNEL] [ 0.200144] NET: Registered protocol family 2
[ KERNEL] [ 0.200705] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ KERNEL] [ 0.200817] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ KERNEL] [ 0.201005] TCP: Hash tables configured (established 8192 bind 8192)
[ KERNEL] [ 0.201095] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ KERNEL] [ 0.201140] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ KERNEL] [ 0.201339] NET: Registered protocol family 1
[ KERNEL] [ 2.329068] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ KERNEL] [ 2.371321] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ KERNEL] [ 2.371350] io scheduler noop registered
[ KERNEL] [ 2.371368] io scheduler deadline registered (default)
[ KERNEL] [ 2.375364] BCM2708FB: allocated DMA memory fac10000
[ KERNEL] [ 2.375405] BCM2708FB: allocated DMA channel 0 @ f3007000
[ KERNEL] [ 2.388045] Console: switching to colour frame buffer device 128x48
[ KERNEL] [ 2.396610] bcm2835-rng 3f104000.rng: hwrng registered
[ KERNEL] [ 2.396761] vc-cma: Videocore CMA driver
[ KERNEL] [ 2.396775] vc-cma: vc_cma_base = 0x00000000
[ KERNEL] [ 2.396783] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
[ KERNEL] [ 2.396791] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
[ KERNEL] [ 2.396988] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
[ KERNEL] [ 2.400702] vchiq: vchiq_init_state: slot_zero = 0xbac80000, is_master = 0
[ KERNEL] [ 2.405085] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ KERNEL] [ 2.605405] Core Release: 2.80a
[ KERNEL] [ 2.605421] Setting default values for core params
[ KERNEL] [ 2.605451] Finished setting default values for core params
[ KERNEL] [ 2.805806] Using Buffer DMA mode
[ KERNEL] [ 2.805821] Periodic Transfer Interrupt Enhancement - disabled
[ KERNEL] [ 2.805828] Multiprocessor Interrupt Enhancement - disabled
[ KERNEL] [ 2.805836] OTG VER PARAM: 0, OTG VER FLAG: 0
[ KERNEL] [ 2.805868] Dedicated Tx FIFOs mode
[ KERNEL] [ 2.806292] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xbac04000 dma = 0xfac04000 len=9024
[ KERNEL] [ 2.806321] FIQ FSM acceleration enabled for :
[ KERNEL] [ 2.806321] Non-periodic Split Transactions
[ KERNEL] [ 2.806321] Periodic Split Transactions
[ KERNEL] [ 2.806321] High-Speed Isochronous Endpoints
[ KERNEL] [ 2.806321] Interrupt/Control Split Transaction hack enabled
[ KERNEL] [ 2.806344] dwc_otg: Microframe scheduler enabled
[ KERNEL] [ 2.806389] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x8025aa08
[ KERNEL] [ 2.806402] WARN::hcd_init_fiq:414: FIQ ASM at 0x8025ad6c length 36
[ KERNEL] [ 2.806415] WARN::hcd_init_fiq:439: MPHI regs_base at 0xbb908000
[ KERNEL] [ 2.806471] dwc_otg 3f980000.usb: DWC OTG Controller
[ KERNEL] [ 2.806506] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ KERNEL] [ 2.806539] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[ KERNEL] [ 2.806588] Init: Port Power? op_state=1
[ KERNEL] [ 2.806595] Init: Power Port (0)
[ KERNEL] [ 2.806766] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ KERNEL] [ 2.806780] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ KERNEL] [ 2.806791] usb usb1: Product: DWC OTG Controller
[ KERNEL] [ 2.806802] usb usb1: Manufacturer: Linux 4.4.39 dwc_otg_hcd
[ KERNEL] [ 2.806813] usb usb1: SerialNumber: 3f980000.usb
[ KERNEL] [ 2.807454] hub 1-0:1.0: USB hub found
[ KERNEL] [ 2.807494] hub 1-0:1.0: 1 port detected
[ KERNEL] [ 2.807912] dwc_otg: FIQ enabled
[ KERNEL] [ 2.807921] dwc_otg: NAK holdoff enabled
[ KERNEL] [ 2.807928] dwc_otg: FIQ split-transaction FSM enabled
[ KERNEL] [ 2.807963] Module dwc_common_port init
[ KERNEL] [ 2.810073] usbcore: registered new interface driver usbtouchscreen
[ KERNEL] [ 2.810759] bcm2835-cpufreq: min=600000 max=1200000
[ KERNEL] [ 2.813019] sdhost: log_buf @ bac07000 (fac07000)
[ KERNEL] [ 2.868164] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ KERNEL] [ 2.870335] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[ KERNEL] [ 2.870345] mmc-bcm2835 3f300000.mmc: Forcing PIO mode
[ KERNEL] [ 2.918285] hidraw: raw HID events driver (C) Jiri Kosina
[ KERNEL] [ 2.918744] usbcore: registered new interface driver usbhid
[ KERNEL] [ 2.918752] usbhid: USB HID core driver
[ KERNEL] [ 2.919172] NET: Registered protocol family 17
[ KERNEL] [ 2.919426] Registering SWP/SWPB emulation handler
[ KERNEL] [ 2.919979] registered taskstats version 1
[ KERNEL] [ 2.920039] vc-sm: Videocore shared memory driver
[ KERNEL] [ 2.920048] [vc_sm_connected_init]: start
[ KERNEL] [ 2.922659] [vc_sm_connected_init]: end - returning 0
[ KERNEL] [ 2.924829] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[ KERNEL] [ 2.925229] console [ttyAMA0] enabled
[ KERNEL] [ 2.928444] mmc0: host does not support reading read-only switch, assuming write-enable
[ KERNEL] [ 2.930366] mmc0: new high speed SDHC card at address 0007
[ KERNEL] [ 2.930387] Freeing unused kernel memory: 4112K (804e8000 - 808ec000)
[ KERNEL] [ 2.930765] mmcblk0: mmc0:0007 SL16G 14.5 GiB
[ KERNEL] [ 2.932028] mmcblk0: p1
[ KERNEL] [ 2.949634] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ KERNEL] [ 2.951346] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ KERNEL] [ 2.952983] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ KERNEL] [ 2.955775] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ KERNEL] [ 2.998163] Indeed it is in host mode hprt0 = 00021501
[ KERNEL] [ 3.041837] mmc1: new high speed SDIO card at address 0001
[ KERNEL] [ 3.178126] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ KERNEL] [ 3.178249] Indeed it is in host mode hprt0 = 00001101
[ hotplug] [ 3.225514] Block device 179:0. No action.
[ hotplug] [ 3.231682] Block device 179:1. No action.
[ pfac] [ 3.234057] Run /sbin/initrd.
[ pfac] [ 3.234373] Ok, PID 545.
[ initrd] [ 3.236012] WTware shell v.5.4.72/RPi
[ initrd] [ 3.244875] Local media boot.
[ KERNEL] [ 3.378383] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ KERNEL] [ 3.378402] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ KERNEL] [ 3.379099] hub 1-1:1.0: USB hub found
[ KERNEL] [ 3.379207] hub 1-1:1.0: 5 ports detected
[ KERNEL] [ 3.658146] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ KERNEL] [ 3.758353] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ KERNEL] [ 3.758368] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ KERNEL] [ 3.838143] usb 1-1.4: new low-speed USB device number 4 using dwc_otg
[ KERNEL] [ 3.942949] usb 1-1.4: New USB device found, idVendor=093a, idProduct=2510
[ KERNEL] [ 3.942964] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ KERNEL] [ 3.942976] usb 1-1.4: Product: USB OPTICAL MOUSE
[ KERNEL] [ 3.942987] usb 1-1.4: Manufacturer: PIXART
[ KERNEL] [ 3.949343] input: PIXART USB OPTICAL MOUSE as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:093A:2510.0001/input/input0
[ KERNEL] [ 3.949806] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-3f980000.usb-1.4/input0
[ KERNEL] [ 4.028144] usb 1-1.5: new low-speed USB device number 5 using dwc_otg
[ KERNEL] [ 4.151478] usb 1-1.5: New USB device found, idVendor=0566, idProduct=3107
[ KERNEL] [ 4.151494] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ KERNEL] [ 4.151506] usb 1-1.5: Product: USB Keyboard
[ KERNEL] [ 4.151517] usb 1-1.5: Manufacturer:
[ KERNEL] [ 4.165098] input: USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:0566:3107.0002/input/input1
[ KERNEL] [ 4.218975] hid-generic 0003:0566:3107.0002: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-3f980000.usb-1.5/input0
[ KERNEL] [ 4.231750] input: USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.1/0003:0566:3107.0003/input/input2
[ KERNEL] [ 4.288495] hid-generic 0003:0566:3107.0003: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-3f980000.usb-1.5/input1
[ initrd] [ 4.620918] WTpassword present: 01ad7dc359caccf3c8de80cb1b9f05a4.
/--- FILE "/bootmedia/configs/initrd.wtc" -----------------------
| [BOM]
| clientIP=*
| config=local
| netmedia=wifi
| setupPassword=01ad7dc359caccf3c8de80cb1b9f05a4
| wifi_ssid=Grupo_Imediato
| wifi_channel=11
| wifi_security=wpa_psk
Skip 'wifi_key='.
\----------------------------------------------------
[ initrd] [ 6.623906] Load WiFi wireless network card driver.
[ initrd] [ 6.628852] Unpack /bootmedia/packages/pi2-dbus.
[ initrd] [ 6.701110] +--- Executing "/usr/bin/dbus-daemon --system"
[ KERNEL] [ 6.719404] random: dbus-daemon: uninitialized urandom read (12 bytes read, 96 bits of entropy available)
[ initrd] [ 6.727815] +- Errorlevel: 0, output:
[ KERNEL] [ 6.732195] random: dbus-daemon: uninitialized urandom read (12 bytes read, 96 bits of entropy available)
File is empty.
[ initrd] [ 6.728174] +------------------------
[ initrd] [ 6.728302] Unpack /bootmedia/packages/pi2-xnet.
[ initrd] [ 7.006731] Load driver for Pi 3 onboard WiFi.
[ initrd] [ 7.006805] modprobe brcmfmac.
[ KERNEL] [ 7.034590] random: nonblocking pool is initialized
[ KERNEL] [ 7.114116] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Dec 15 2015 18:10:45 version 7.45.41.23 (r606571) FWID 01-cc4eda9c
[ KERNEL] [ 7.129903] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code
[ KERNEL] [ 7.223046] brcmfmac_sdio mmc1:0001:1 eth0: renamed from wlan0
[ initrd] [ 7.262110] Copy /bootmedia/configs/wpa_supplicant.conf to /etc/wpa.conf.
[ KERNEL] [ 7.268234] brcmfmac: power management disabled
/--- FILE "/etc/wpa.conf" -----------------------
| ctrl_interface=/var/run/wpa_supplicant
| network={
| ssid="ID_GRUPOIMEDIATO"
Skip 'psk='.
| }
\----------------------------------------------------
[ initrd] [ 7.263022] +--- Executing "/sbin/wpa_supplicant -B -c /etc/wpa.conf -i eth0 -f /tmp/wpa_supplicant.out"
[ WPA] [ 7.270185] Successfully initialized wpa_supplicant
[ KERNEL] [ 7.379619] brcmfmac: brcmf_add_if: ERROR: netdev:eth0 already exists
[ KERNEL] [ 7.379635] brcmfmac: brcmf_add_if: ignore IF event
[ KERNEL] [ 7.384687] brcmfmac: power management disabled
[ KERNEL] [ 7.521553] brcmfmac: brcmf_add_if: ERROR: netdev:eth0 already exists
[ KERNEL] [ 7.521572] brcmfmac: brcmf_add_if: ignore IF event
[ WPA] [ 7.590114] Could not read interface p2p-dev-eth0 flags: No such device
[ initrd] [ 7.613395] +- Errorlevel: 0, output:
File is empty.
[ initrd] [ 7.613806] +------------------------
[ initrd] [ 7.619928] State SCANNING before handshake, do nothing.
[ initrd] [ 7.925950] State SCANNING before handshake, do nothing.
[ WPA] [ 8.091004] eth0: Trying to associate with 14:cc:20:65:1c:ed (SSID='ID_GRUPOIMEDIATO' freq=2452 MHz)
[ WPA] [ 8.180557] eth0: Associated with 14:cc:20:65:1c:ed
[ WPA] [ 8.192068] eth0: WPA: Key negotiation completed with 14:cc:20:65:1c:ed [PTK=CCMP GTK=TKIP]
[ WPA] [ 8.192177] eth0: CTRL-EVENT-CONNECTED - Connection to 14:cc:20:65:1c:ed completed [id=0 id_str=]
[ initrd] [ 8.231925] wpa_state=COMPLETED
[ initrd] [ 8.232027] WTpassword present: 01ad7dc359caccf3c8de80cb1b9f05a4.
[ initrd] [ 9.274925] dhcp: 328 bytes from 172.28.20.1.
[ initrd] [ 9.275054] 00000000:000001340000000000110000AC1C1401AC1C141B004300440134000002010600 ...4.....?...??..???.C.D.4......
[ initrd] [ 9.275130] 00000020:67458B6B0000000000000000AC1C141B0000000000000000B827EB85620B0000 gE.k.........???.........'..b...
[ initrd] [ 9.275201] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 9.275270] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 9.275339] 00000080:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 9.275409] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 9.275477] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 9.275546] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 10.790161] dhcp: 328 bytes from 172.28.20.1.
[ initrd] [ 10.790290] 00000000:000001340000000000110000AC1C1401AC1C141B004300440134000002010600 ...4.....?...??..???.C.D.4......
[ initrd] [ 10.790366] 00000020:67458B6B0000000000000000AC1C141B0000000000000000B827EB85620B0000 gE.k.........???.........'..b...
[ initrd] [ 10.790438] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 10.790507] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 10.790576] 00000080:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 10.790644] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 10.790713] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 10.790781] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 10.820087] dhcp: server address 172.28.20.1.
[ initrd] [ 10.820163] dhcp: 172.28.20.27/255.255.255.0.
[ initrd] [ 10.820232] dhcp: default gateway 172.28.20.1.
[ initrd] [ 10.820300] dhcp: DNS 192.168.20.1.
[ initrd] [ 10.820367] dhcp: domain grupoimediato.local.
[ initrd] [ 10.820435] dhcp: TFTP = DHCP 172.28.20.1.
[ initrd] [ 10.820502] dhcp: TFTP 172.28.20.1.
[ initrd] [ 10.820569] No boot file from DHCP.
[ initrd] [ 10.820635] TFTP binary "", configs prefix "", using "/" slash.
Send broadcast WTCU discover.
[ pfac] [ 10.822263] Run /sbin/httpd.
[ initrd] [ 10.822338] Run '/sbin/httpd', log '/tmp/httpd.out', env '', pid ''.
[ pfac] [ 10.822451] Ok, PID 607.
[ httpd] [ 10.826097] HTTP Server, WTware v.5.4.72/RPi
[ initrd] [ 10.942269] USB: 0424:9514 Standard Microsystems Corp. SMC9514 Hub.
[ initrd] [ 10.942401] USB: 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter.
[ initrd] [ 10.942475] USB: 093a:2510 Pixart Imaging, Inc. Optical Mouse.
[ initrd] [ 10.942546] USB: 0566:3107 Monterey International Corp. Keyboard.
[ initrd] [ 10.942616] Copy /bootmedia/configs/config.wtc to /tmp/config.wtc.
[ initrd] [ 10.943420] Common local disk config:
/--- FILE "/tmp/config.wtc" -----------------------
| [BOM]
| server=ts-imediato
| skin=sample
| bpp=16
| turnoffmenu=always, msg: "Aguardando tecla..."
| disk=usb
| display = 1366x768
| keyboard=pt-br
| connection
\----------------------------------------------------
/--- FILE "/etc/config.compiled" -----------------------
| [BOM]
| server=ts-imediato
| skin=sample
| bpp=16
| turnoffmenu=always, msg: "Aguardando tecla..."
| disk=usb
| display=1366x768
| keyboard=pt-br
| connection
\----------------------------------------------------
[ initrd] [ 10.961279] Hostname: "wtwB827EB85620B".
Everyone can control terminal by RSH.
RSH: listener is active.
Send broadcast WTCU discover.
[ httpd] [ 11.174884] Reread settings.
[ httpd] [ 11.175018] Everyone can control terminal by HTTP.
[ gm] [ 11.177770] WTware session manager v.5.4.72/RPi.
[ gm] [ 11.178955] Add keyboard event2: USB Keyboard.
[ gm] [ 11.179036] Add keyboard event1: USB Keyboard.
[ gm] [ 11.179110] EV_REL flag found. Add mouse event0: PIXART USB OPTICAL MOUSE.
[ gm] [ 11.179184] Display mode: 1024x768, 16 bit, 0 Hz, modeline "", DDC enabled, connector 0.
[ gm] [ 11.188742] Framebuffer device found.
[ gm] [ 11.188821] LINELENBYTES 2048
[ gm] [ 11.188895] VLEN 1572864
[ gm] [ 11.199121] Use /lib/ui16.so.
[ gm] [ 11.210486] Copy /bootmedia/graphic/sample/menu.png to /tmp/menu.png.
[ gm] [ 11.212515] Copy /bootmedia/graphic/sample/saver.png to /tmp/saver.png.
[ gm] [ 11.214536] Copy /bootmedia/graphic/sample/wait.png to /tmp/wait.png.
[ gm] [ 11.293585] Load usb storage driver.
[ gm] [ 11.293704] modprobe scsi_mod.
[ gm] [ 11.306256] modprobe usb-storage.
[ KERNEL] [ 11.313323] SCSI subsystem initialized
[ gm] [ 11.317697] modprobe sd_mod.
[ KERNEL] [ 11.324828] usbcore: registered new interface driver usb-storage
[ gm] [ 11.326723] Load EXFAT filesystem driver.
[ gm] [ 11.326870] modprobe fuse.
[ gm] [ 11.338485] modprobe exfat.
[ KERNEL] [ 11.345132] fuse init (API version 7.23)
[ KERNEL] [ 11.355155] exFAT: Version 1.2.9
[ gm] [ 11.361028] Run '/sbin/resolver 0x1d3b38 dns [ts-imediato]', log '', env '', pid ''.
[ gm] [ 11.361176] Nobody can control terminal by VNC.
[ pfac] [ 11.361388] Run /sbin/resolver 0x1d3b38 dns [ts-imediato].
[ pfac] [ 11.362007] Ok, PID 633.
[ gm] [ 11.494154] ts-imediato => 10.203.4.18.
[ gm] [ 11.494313] ts-imediato => 10.203.4.17.
[ gm] [ 11.494403] ts-imediato => 10.203.4.15.
[ gm] [ 11.494479] ts-imediato => 10.203.4.16.
[ gm] [ 11.494552] Free ram before fork terminal client /sbin/rdpclient (session 1): 916368 Kb.
[ pfac] [ 11.494627] Process pid 633 terminated, status 00000000.
[ gm] [ 11.494670] Run '/sbin/rdpclient 1', log '/tmp/rdpclient.out', env '', pid ''.
[ pfac] [ 11.494742] Run /sbin/rdpclient 1.
[ pfac] [ 11.494894] Ok, PID 634.
[ rdpclient 634] [ 11.501713] RDP Terminal Client, WTware v.5.4.72/RPi, pipe 1, pid 634.
[ rdpclient 634] [ 11.502706] Use /lib/ui16.so.
[ rdpclient 634] [ 11.504215] Make RDP session with 10.203.4.18, 10.203.4.17, 10.203.4.15, 10.203.4.16, port 3389.
[ rdpclient 634] [ 11.504316] No username.
[ rdpclient 634] [ 11.504396] No password.
[ rdpclient 634] [ 11.504516] No PIN.
[ rdpclient 634] [ 11.504658] No domain.
[ rdpclient 634] [ 11.504760] No shell.
[ rdpclient 634] [ 11.504876] No directory.
[ rdpclient 634] [ 11.504974] Window: 1024x768@16.
[ rdpclient 634] [ 11.505071] PFlags 0x0000002F.
[ rdpclient 634] [ 11.505146] Keyboard 00000416:00000000.
[ rdpclient 634] [ 11.505250] My hostname "wtwB827EB85620B".
[ rdpclient 634] [ 11.566842] TCP: connection with 10.203.4.17:3389 established.
[ rdpclient 634] [ 11.566993] Turn keepalive on.
[ rdpclient 634] [ 11.567777] Free ram after buffers allocation: 916036 KB.
[ rdpclient 634] [ 11.652417] Process RDP server certificate.
[ rdpclient 634] [ 11.652553] RDP5 encryption (X.509).
Any ideas what can be wrong?
Thanks !!!
I have many users connecting to a W2008 Server. All of them have identical settings and i am using identical hardware (raspberry, hdmi/vga conversor) to all of them.
I am having some resolution problem with one (only one) of the users. The resolution for all of the users is set automatically (by wtware maybe) to 1366x768, but in this case i am having 1024x768 no matter what i do. I tried "display" parameter but it seems not to work.
This is the log: (I put bold letter for resolution)
WTware v.5.4.72/RPi supervisor.
WTC listener is active.
WTC broadcast listener is active.
[ KERNEL] [ 0.000000] Booting Linux on physical CPU 0x0
[ KERNEL] [ 0.000000] Initializing cgroup subsys cpuset
[ KERNEL] [ 0.000000] Initializing cgroup subsys cpu
[ KERNEL] [ 0.000000] Initializing cgroup subsys cpuacct
[ KERNEL] [ 0.000000] Linux version 4.4.39 (aka@c12) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #29 SMP Mon Feb 6 16:10:29 +04 2017
[ KERNEL] [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ KERNEL] [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ KERNEL] [ 0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
[ KERNEL] [ 0.000000] cma: Reserved 8 MiB at 0x3a800000
[ KERNEL] [ 0.000000] Memory policy: Data cache writealloc
[ KERNEL] [ 0.000000] On node 0 totalpages: 241664
[ KERNEL] [ 0.000000] free_area_init_node: node 0, pgdat 80915640, node_mem_map b9fa6000
[ KERNEL] [ 0.000000] Normal zone: 2124 pages used for memmap
[ KERNEL] [ 0.000000] Normal zone: 0 pages reserved
[ KERNEL] [ 0.000000] Normal zone: 241664 pages, LIFO batch:31
[ KERNEL] [ 0.000000] [bcm2709_smp_init_cpus] enter (94c0->f3003010)
[ KERNEL] [ 0.000000] [bcm2709_smp_init_cpus] ncores=4
[ KERNEL] [ 0.000000] PERCPU: Embedded 11 pages/cpu @b9f6a000 s13324 r8192 d23540 u45056
[ KERNEL] [ 0.000000] pcpu-alloc: s13324 r8192 d23540 u45056 alloc=11*4096
[ KERNEL] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ KERNEL] [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 239540
[ KERNEL] [ 0.000000] Kernel command line: 8250.nr_uarts=1 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1024 bcm2708_fb.fbheight=768 bcm2709.boardrev=0xa22082 bcm2709.serial=0xd6d0375e smsc95xx.macaddr=B8:27:EB:D0:37:5E bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 bcm2709.uart_clock=48000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 console=ttyAMA0,115200 console=tty1 quiet wtboot=mmc
[ KERNEL] [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ KERNEL] [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ KERNEL] [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ KERNEL] [ 0.000000] Memory: 939208K/966656K available (3807K kernel code, 169K rwdata, 1184K rodata, 4112K init, 365K bss, 19256K reserved, 8192K cma-reserved)
[ KERNEL] [ 0.000000] Virtual kernel memory layout:
[ KERNEL] [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ KERNEL] [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ KERNEL] [ 0.000000] vmalloc : 0xbb800000 - 0xff800000 (1088 MB)
[ KERNEL] [ 0.000000] lowmem : 0x80000000 - 0xbb000000 ( 944 MB)
[ KERNEL] [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
[ KERNEL] [ 0.000000] .text : 0x80008000 - 0x804e7f94 (4992 kB)
[ KERNEL] [ 0.000000] .init : 0x804e8000 - 0x808ec000 (4112 kB)
[ KERNEL] [ 0.000000] .data : 0x808ec000 - 0x80916560 ( 170 kB)
[ KERNEL] [ 0.000000] .bss : 0x80919000 - 0x80974588 ( 366 kB)
[ KERNEL] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ KERNEL] [ 0.000000] Hierarchical RCU implementation.
[ KERNEL] [ 0.000000] Build-time adjustment of leaf fanout to 32.
[ KERNEL] [ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ KERNEL] [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
[ KERNEL] [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ KERNEL] [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ KERNEL] [ 0.000022] Switching to timer-based delay loop, resolution 52ns
[ KERNEL] [ 0.000191] Console: colour dummy device 80x30
[ KERNEL] [ 0.000368] console [tty1] enabled
[ KERNEL] [ 0.000388] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ KERNEL] [ 0.000406] pid_max: default: 32768 minimum: 301
[ KERNEL] [ 0.000522] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ KERNEL] [ 0.000535] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ KERNEL] [ 0.001368] Disabling cpuset control group subsystem
[ KERNEL] [ 0.001395] Initializing cgroup subsys io
[ KERNEL] [ 0.001419] Initializing cgroup subsys memory
[ KERNEL] [ 0.001455] Initializing cgroup subsys devices
[ KERNEL] [ 0.001471] Initializing cgroup subsys freezer
[ KERNEL] [ 0.001509] CPU: Testing write buffer coherency: ok
[ KERNEL] [ 0.001958] CPU0: update cpu_capacity 1024
[ KERNEL] [ 0.001969] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ KERNEL] [ 0.001979] [bcm2709_smp_prepare_cpus] enter
[ KERNEL] [ 0.002054] Setting up static identity map for 0x8240 - 0x8274
[ KERNEL] [ 0.003377] [bcm2709_boot_secondary] cpu:1 started (0) 17
[ KERNEL] [ 0.003568] [bcm2709_secondary_init] enter cpu:1
[ KERNEL] [ 0.003604] CPU1: update cpu_capacity 1024
[ KERNEL] [ 0.003609] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ KERNEL] [ 0.003938] [bcm2709_boot_secondary] cpu:2 started (0) 16
[ KERNEL] [ 0.004079] [bcm2709_secondary_init] enter cpu:2
[ KERNEL] [ 0.004097] CPU2: update cpu_capacity 1024
[ KERNEL] [ 0.004103] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ KERNEL] [ 0.004401] [bcm2709_boot_secondary] cpu:3 started (0) 18
[ KERNEL] [ 0.004530] [bcm2709_secondary_init] enter cpu:3
[ KERNEL] [ 0.004548] CPU3: update cpu_capacity 1024
[ KERNEL] [ 0.004553] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ KERNEL] [ 0.004606] Brought up 4 CPUs
[ KERNEL] [ 0.004628] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ KERNEL] [ 0.004635] CPU: All CPU(s) started in HYP mode.
[ KERNEL] [ 0.004641] CPU: Virtualization extensions available.
[ KERNEL] [ 0.005010] devtmpfs: initialized
[ KERNEL] [ 0.014568] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ KERNEL] [ 0.014902] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ KERNEL] [ 0.015379] pinctrl core: initialized pinctrl subsystem
[ KERNEL] [ 0.015790] NET: Registered protocol family 16
[ KERNEL] [ 0.020752] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[ KERNEL] [ 0.049936] cpuidle: using governor ladder
[ KERNEL] [ 0.079954] cpuidle: using governor menu
[ KERNEL] [ 0.085802] Serial: AMBA PL011 UART driver
[ KERNEL] [ 0.085984] uart-pl011 3f201000.uart: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[ KERNEL] [ 0.086181] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ KERNEL] [ 0.152479] bcm2835-dma 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0x1
[ KERNEL] [ 0.152988] usbcore: registered new interface driver usbfs
[ KERNEL] [ 0.153123] usbcore: registered new interface driver hub
[ KERNEL] [ 0.153214] usbcore: registered new device driver usb
[ KERNEL] [ 0.160130] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-12-09 15:11
[ KERNEL] [ 0.188114] clocksource: Switched to clocksource arch_sys_counter
[ KERNEL] [ 0.200144] NET: Registered protocol family 2
[ KERNEL] [ 0.200705] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ KERNEL] [ 0.200817] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ KERNEL] [ 0.201005] TCP: Hash tables configured (established 8192 bind 8192)
[ KERNEL] [ 0.201095] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ KERNEL] [ 0.201140] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ KERNEL] [ 0.201339] NET: Registered protocol family 1
[ KERNEL] [ 2.329068] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ KERNEL] [ 2.371321] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ KERNEL] [ 2.371350] io scheduler noop registered
[ KERNEL] [ 2.371368] io scheduler deadline registered (default)
[ KERNEL] [ 2.375364] BCM2708FB: allocated DMA memory fac10000
[ KERNEL] [ 2.375405] BCM2708FB: allocated DMA channel 0 @ f3007000
[ KERNEL] [ 2.388045] Console: switching to colour frame buffer device 128x48
[ KERNEL] [ 2.396610] bcm2835-rng 3f104000.rng: hwrng registered
[ KERNEL] [ 2.396761] vc-cma: Videocore CMA driver
[ KERNEL] [ 2.396775] vc-cma: vc_cma_base = 0x00000000
[ KERNEL] [ 2.396783] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
[ KERNEL] [ 2.396791] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
[ KERNEL] [ 2.396988] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
[ KERNEL] [ 2.400702] vchiq: vchiq_init_state: slot_zero = 0xbac80000, is_master = 0
[ KERNEL] [ 2.405085] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ KERNEL] [ 2.605405] Core Release: 2.80a
[ KERNEL] [ 2.605421] Setting default values for core params
[ KERNEL] [ 2.605451] Finished setting default values for core params
[ KERNEL] [ 2.805806] Using Buffer DMA mode
[ KERNEL] [ 2.805821] Periodic Transfer Interrupt Enhancement - disabled
[ KERNEL] [ 2.805828] Multiprocessor Interrupt Enhancement - disabled
[ KERNEL] [ 2.805836] OTG VER PARAM: 0, OTG VER FLAG: 0
[ KERNEL] [ 2.805868] Dedicated Tx FIFOs mode
[ KERNEL] [ 2.806292] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xbac04000 dma = 0xfac04000 len=9024
[ KERNEL] [ 2.806321] FIQ FSM acceleration enabled for :
[ KERNEL] [ 2.806321] Non-periodic Split Transactions
[ KERNEL] [ 2.806321] Periodic Split Transactions
[ KERNEL] [ 2.806321] High-Speed Isochronous Endpoints
[ KERNEL] [ 2.806321] Interrupt/Control Split Transaction hack enabled
[ KERNEL] [ 2.806344] dwc_otg: Microframe scheduler enabled
[ KERNEL] [ 2.806389] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x8025aa08
[ KERNEL] [ 2.806402] WARN::hcd_init_fiq:414: FIQ ASM at 0x8025ad6c length 36
[ KERNEL] [ 2.806415] WARN::hcd_init_fiq:439: MPHI regs_base at 0xbb908000
[ KERNEL] [ 2.806471] dwc_otg 3f980000.usb: DWC OTG Controller
[ KERNEL] [ 2.806506] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ KERNEL] [ 2.806539] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[ KERNEL] [ 2.806588] Init: Port Power? op_state=1
[ KERNEL] [ 2.806595] Init: Power Port (0)
[ KERNEL] [ 2.806766] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ KERNEL] [ 2.806780] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ KERNEL] [ 2.806791] usb usb1: Product: DWC OTG Controller
[ KERNEL] [ 2.806802] usb usb1: Manufacturer: Linux 4.4.39 dwc_otg_hcd
[ KERNEL] [ 2.806813] usb usb1: SerialNumber: 3f980000.usb
[ KERNEL] [ 2.807454] hub 1-0:1.0: USB hub found
[ KERNEL] [ 2.807494] hub 1-0:1.0: 1 port detected
[ KERNEL] [ 2.807912] dwc_otg: FIQ enabled
[ KERNEL] [ 2.807921] dwc_otg: NAK holdoff enabled
[ KERNEL] [ 2.807928] dwc_otg: FIQ split-transaction FSM enabled
[ KERNEL] [ 2.807963] Module dwc_common_port init
[ KERNEL] [ 2.810073] usbcore: registered new interface driver usbtouchscreen
[ KERNEL] [ 2.810759] bcm2835-cpufreq: min=600000 max=1200000
[ KERNEL] [ 2.813019] sdhost: log_buf @ bac07000 (fac07000)
[ KERNEL] [ 2.868164] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ KERNEL] [ 2.870335] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[ KERNEL] [ 2.870345] mmc-bcm2835 3f300000.mmc: Forcing PIO mode
[ KERNEL] [ 2.918285] hidraw: raw HID events driver (C) Jiri Kosina
[ KERNEL] [ 2.918744] usbcore: registered new interface driver usbhid
[ KERNEL] [ 2.918752] usbhid: USB HID core driver
[ KERNEL] [ 2.919172] NET: Registered protocol family 17
[ KERNEL] [ 2.919426] Registering SWP/SWPB emulation handler
[ KERNEL] [ 2.919979] registered taskstats version 1
[ KERNEL] [ 2.920039] vc-sm: Videocore shared memory driver
[ KERNEL] [ 2.920048] [vc_sm_connected_init]: start
[ KERNEL] [ 2.922659] [vc_sm_connected_init]: end - returning 0
[ KERNEL] [ 2.924829] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[ KERNEL] [ 2.925229] console [ttyAMA0] enabled
[ KERNEL] [ 2.928444] mmc0: host does not support reading read-only switch, assuming write-enable
[ KERNEL] [ 2.930366] mmc0: new high speed SDHC card at address 0007
[ KERNEL] [ 2.930387] Freeing unused kernel memory: 4112K (804e8000 - 808ec000)
[ KERNEL] [ 2.930765] mmcblk0: mmc0:0007 SL16G 14.5 GiB
[ KERNEL] [ 2.932028] mmcblk0: p1
[ KERNEL] [ 2.949634] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ KERNEL] [ 2.951346] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ KERNEL] [ 2.952983] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ KERNEL] [ 2.955775] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ KERNEL] [ 2.998163] Indeed it is in host mode hprt0 = 00021501
[ KERNEL] [ 3.041837] mmc1: new high speed SDIO card at address 0001
[ KERNEL] [ 3.178126] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ KERNEL] [ 3.178249] Indeed it is in host mode hprt0 = 00001101
[ hotplug] [ 3.225514] Block device 179:0. No action.
[ hotplug] [ 3.231682] Block device 179:1. No action.
[ pfac] [ 3.234057] Run /sbin/initrd.
[ pfac] [ 3.234373] Ok, PID 545.
[ initrd] [ 3.236012] WTware shell v.5.4.72/RPi
[ initrd] [ 3.244875] Local media boot.
[ KERNEL] [ 3.378383] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ KERNEL] [ 3.378402] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ KERNEL] [ 3.379099] hub 1-1:1.0: USB hub found
[ KERNEL] [ 3.379207] hub 1-1:1.0: 5 ports detected
[ KERNEL] [ 3.658146] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ KERNEL] [ 3.758353] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ KERNEL] [ 3.758368] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ KERNEL] [ 3.838143] usb 1-1.4: new low-speed USB device number 4 using dwc_otg
[ KERNEL] [ 3.942949] usb 1-1.4: New USB device found, idVendor=093a, idProduct=2510
[ KERNEL] [ 3.942964] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ KERNEL] [ 3.942976] usb 1-1.4: Product: USB OPTICAL MOUSE
[ KERNEL] [ 3.942987] usb 1-1.4: Manufacturer: PIXART
[ KERNEL] [ 3.949343] input: PIXART USB OPTICAL MOUSE as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:093A:2510.0001/input/input0
[ KERNEL] [ 3.949806] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-3f980000.usb-1.4/input0
[ KERNEL] [ 4.028144] usb 1-1.5: new low-speed USB device number 5 using dwc_otg
[ KERNEL] [ 4.151478] usb 1-1.5: New USB device found, idVendor=0566, idProduct=3107
[ KERNEL] [ 4.151494] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ KERNEL] [ 4.151506] usb 1-1.5: Product: USB Keyboard
[ KERNEL] [ 4.151517] usb 1-1.5: Manufacturer:
[ KERNEL] [ 4.165098] input: USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:0566:3107.0002/input/input1
[ KERNEL] [ 4.218975] hid-generic 0003:0566:3107.0002: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-3f980000.usb-1.5/input0
[ KERNEL] [ 4.231750] input: USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.1/0003:0566:3107.0003/input/input2
[ KERNEL] [ 4.288495] hid-generic 0003:0566:3107.0003: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-3f980000.usb-1.5/input1
[ initrd] [ 4.620918] WTpassword present: 01ad7dc359caccf3c8de80cb1b9f05a4.
/--- FILE "/bootmedia/configs/initrd.wtc" -----------------------
| [BOM]
| clientIP=*
| config=local
| netmedia=wifi
| setupPassword=01ad7dc359caccf3c8de80cb1b9f05a4
| wifi_ssid=Grupo_Imediato
| wifi_channel=11
| wifi_security=wpa_psk
Skip 'wifi_key='.
\----------------------------------------------------
[ initrd] [ 6.623906] Load WiFi wireless network card driver.
[ initrd] [ 6.628852] Unpack /bootmedia/packages/pi2-dbus.
[ initrd] [ 6.701110] +--- Executing "/usr/bin/dbus-daemon --system"
[ KERNEL] [ 6.719404] random: dbus-daemon: uninitialized urandom read (12 bytes read, 96 bits of entropy available)
[ initrd] [ 6.727815] +- Errorlevel: 0, output:
[ KERNEL] [ 6.732195] random: dbus-daemon: uninitialized urandom read (12 bytes read, 96 bits of entropy available)
File is empty.
[ initrd] [ 6.728174] +------------------------
[ initrd] [ 6.728302] Unpack /bootmedia/packages/pi2-xnet.
[ initrd] [ 7.006731] Load driver for Pi 3 onboard WiFi.
[ initrd] [ 7.006805] modprobe brcmfmac.
[ KERNEL] [ 7.034590] random: nonblocking pool is initialized
[ KERNEL] [ 7.114116] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Dec 15 2015 18:10:45 version 7.45.41.23 (r606571) FWID 01-cc4eda9c
[ KERNEL] [ 7.129903] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code
[ KERNEL] [ 7.223046] brcmfmac_sdio mmc1:0001:1 eth0: renamed from wlan0
[ initrd] [ 7.262110] Copy /bootmedia/configs/wpa_supplicant.conf to /etc/wpa.conf.
[ KERNEL] [ 7.268234] brcmfmac: power management disabled
/--- FILE "/etc/wpa.conf" -----------------------
| ctrl_interface=/var/run/wpa_supplicant
| network={
| ssid="ID_GRUPOIMEDIATO"
Skip 'psk='.
| }
\----------------------------------------------------
[ initrd] [ 7.263022] +--- Executing "/sbin/wpa_supplicant -B -c /etc/wpa.conf -i eth0 -f /tmp/wpa_supplicant.out"
[ WPA] [ 7.270185] Successfully initialized wpa_supplicant
[ KERNEL] [ 7.379619] brcmfmac: brcmf_add_if: ERROR: netdev:eth0 already exists
[ KERNEL] [ 7.379635] brcmfmac: brcmf_add_if: ignore IF event
[ KERNEL] [ 7.384687] brcmfmac: power management disabled
[ KERNEL] [ 7.521553] brcmfmac: brcmf_add_if: ERROR: netdev:eth0 already exists
[ KERNEL] [ 7.521572] brcmfmac: brcmf_add_if: ignore IF event
[ WPA] [ 7.590114] Could not read interface p2p-dev-eth0 flags: No such device
[ initrd] [ 7.613395] +- Errorlevel: 0, output:
File is empty.
[ initrd] [ 7.613806] +------------------------
[ initrd] [ 7.619928] State SCANNING before handshake, do nothing.
[ initrd] [ 7.925950] State SCANNING before handshake, do nothing.
[ WPA] [ 8.091004] eth0: Trying to associate with 14:cc:20:65:1c:ed (SSID='ID_GRUPOIMEDIATO' freq=2452 MHz)
[ WPA] [ 8.180557] eth0: Associated with 14:cc:20:65:1c:ed
[ WPA] [ 8.192068] eth0: WPA: Key negotiation completed with 14:cc:20:65:1c:ed [PTK=CCMP GTK=TKIP]
[ WPA] [ 8.192177] eth0: CTRL-EVENT-CONNECTED - Connection to 14:cc:20:65:1c:ed completed [id=0 id_str=]
[ initrd] [ 8.231925] wpa_state=COMPLETED
[ initrd] [ 8.232027] WTpassword present: 01ad7dc359caccf3c8de80cb1b9f05a4.
[ initrd] [ 9.274925] dhcp: 328 bytes from 172.28.20.1.
[ initrd] [ 9.275054] 00000000:000001340000000000110000AC1C1401AC1C141B004300440134000002010600 ...4.....?...??..???.C.D.4......
[ initrd] [ 9.275130] 00000020:67458B6B0000000000000000AC1C141B0000000000000000B827EB85620B0000 gE.k.........???.........'..b...
[ initrd] [ 9.275201] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 9.275270] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 9.275339] 00000080:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 9.275409] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 9.275477] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 9.275546] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 10.790161] dhcp: 328 bytes from 172.28.20.1.
[ initrd] [ 10.790290] 00000000:000001340000000000110000AC1C1401AC1C141B004300440134000002010600 ...4.....?...??..???.C.D.4......
[ initrd] [ 10.790366] 00000020:67458B6B0000000000000000AC1C141B0000000000000000B827EB85620B0000 gE.k.........???.........'..b...
[ initrd] [ 10.790438] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 10.790507] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 10.790576] 00000080:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 10.790644] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 10.790713] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 10.790781] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 10.820087] dhcp: server address 172.28.20.1.
[ initrd] [ 10.820163] dhcp: 172.28.20.27/255.255.255.0.
[ initrd] [ 10.820232] dhcp: default gateway 172.28.20.1.
[ initrd] [ 10.820300] dhcp: DNS 192.168.20.1.
[ initrd] [ 10.820367] dhcp: domain grupoimediato.local.
[ initrd] [ 10.820435] dhcp: TFTP = DHCP 172.28.20.1.
[ initrd] [ 10.820502] dhcp: TFTP 172.28.20.1.
[ initrd] [ 10.820569] No boot file from DHCP.
[ initrd] [ 10.820635] TFTP binary "", configs prefix "", using "/" slash.
Send broadcast WTCU discover.
[ pfac] [ 10.822263] Run /sbin/httpd.
[ initrd] [ 10.822338] Run '/sbin/httpd', log '/tmp/httpd.out', env '', pid ''.
[ pfac] [ 10.822451] Ok, PID 607.
[ httpd] [ 10.826097] HTTP Server, WTware v.5.4.72/RPi
[ initrd] [ 10.942269] USB: 0424:9514 Standard Microsystems Corp. SMC9514 Hub.
[ initrd] [ 10.942401] USB: 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter.
[ initrd] [ 10.942475] USB: 093a:2510 Pixart Imaging, Inc. Optical Mouse.
[ initrd] [ 10.942546] USB: 0566:3107 Monterey International Corp. Keyboard.
[ initrd] [ 10.942616] Copy /bootmedia/configs/config.wtc to /tmp/config.wtc.
[ initrd] [ 10.943420] Common local disk config:
/--- FILE "/tmp/config.wtc" -----------------------
| [BOM]
| server=ts-imediato
| skin=sample
| bpp=16
| turnoffmenu=always, msg: "Aguardando tecla..."
| disk=usb
| display = 1366x768
| keyboard=pt-br
| connection
\----------------------------------------------------
/--- FILE "/etc/config.compiled" -----------------------
| [BOM]
| server=ts-imediato
| skin=sample
| bpp=16
| turnoffmenu=always, msg: "Aguardando tecla..."
| disk=usb
| display=1366x768
| keyboard=pt-br
| connection
\----------------------------------------------------
[ initrd] [ 10.961279] Hostname: "wtwB827EB85620B".
Everyone can control terminal by RSH.
RSH: listener is active.
Send broadcast WTCU discover.
[ httpd] [ 11.174884] Reread settings.
[ httpd] [ 11.175018] Everyone can control terminal by HTTP.
[ gm] [ 11.177770] WTware session manager v.5.4.72/RPi.
[ gm] [ 11.178955] Add keyboard event2: USB Keyboard.
[ gm] [ 11.179036] Add keyboard event1: USB Keyboard.
[ gm] [ 11.179110] EV_REL flag found. Add mouse event0: PIXART USB OPTICAL MOUSE.
[ gm] [ 11.179184] Display mode: 1024x768, 16 bit, 0 Hz, modeline "", DDC enabled, connector 0.
[ gm] [ 11.188742] Framebuffer device found.
[ gm] [ 11.188821] LINELENBYTES 2048
[ gm] [ 11.188895] VLEN 1572864
[ gm] [ 11.199121] Use /lib/ui16.so.
[ gm] [ 11.210486] Copy /bootmedia/graphic/sample/menu.png to /tmp/menu.png.
[ gm] [ 11.212515] Copy /bootmedia/graphic/sample/saver.png to /tmp/saver.png.
[ gm] [ 11.214536] Copy /bootmedia/graphic/sample/wait.png to /tmp/wait.png.
[ gm] [ 11.293585] Load usb storage driver.
[ gm] [ 11.293704] modprobe scsi_mod.
[ gm] [ 11.306256] modprobe usb-storage.
[ KERNEL] [ 11.313323] SCSI subsystem initialized
[ gm] [ 11.317697] modprobe sd_mod.
[ KERNEL] [ 11.324828] usbcore: registered new interface driver usb-storage
[ gm] [ 11.326723] Load EXFAT filesystem driver.
[ gm] [ 11.326870] modprobe fuse.
[ gm] [ 11.338485] modprobe exfat.
[ KERNEL] [ 11.345132] fuse init (API version 7.23)
[ KERNEL] [ 11.355155] exFAT: Version 1.2.9
[ gm] [ 11.361028] Run '/sbin/resolver 0x1d3b38 dns [ts-imediato]', log '', env '', pid ''.
[ gm] [ 11.361176] Nobody can control terminal by VNC.
[ pfac] [ 11.361388] Run /sbin/resolver 0x1d3b38 dns [ts-imediato].
[ pfac] [ 11.362007] Ok, PID 633.
[ gm] [ 11.494154] ts-imediato => 10.203.4.18.
[ gm] [ 11.494313] ts-imediato => 10.203.4.17.
[ gm] [ 11.494403] ts-imediato => 10.203.4.15.
[ gm] [ 11.494479] ts-imediato => 10.203.4.16.
[ gm] [ 11.494552] Free ram before fork terminal client /sbin/rdpclient (session 1): 916368 Kb.
[ pfac] [ 11.494627] Process pid 633 terminated, status 00000000.
[ gm] [ 11.494670] Run '/sbin/rdpclient 1', log '/tmp/rdpclient.out', env '', pid ''.
[ pfac] [ 11.494742] Run /sbin/rdpclient 1.
[ pfac] [ 11.494894] Ok, PID 634.
[ rdpclient 634] [ 11.501713] RDP Terminal Client, WTware v.5.4.72/RPi, pipe 1, pid 634.
[ rdpclient 634] [ 11.502706] Use /lib/ui16.so.
[ rdpclient 634] [ 11.504215] Make RDP session with 10.203.4.18, 10.203.4.17, 10.203.4.15, 10.203.4.16, port 3389.
[ rdpclient 634] [ 11.504316] No username.
[ rdpclient 634] [ 11.504396] No password.
[ rdpclient 634] [ 11.504516] No PIN.
[ rdpclient 634] [ 11.504658] No domain.
[ rdpclient 634] [ 11.504760] No shell.
[ rdpclient 634] [ 11.504876] No directory.
[ rdpclient 634] [ 11.504974] Window: 1024x768@16.
[ rdpclient 634] [ 11.505071] PFlags 0x0000002F.
[ rdpclient 634] [ 11.505146] Keyboard 00000416:00000000.
[ rdpclient 634] [ 11.505250] My hostname "wtwB827EB85620B".
[ rdpclient 634] [ 11.566842] TCP: connection with 10.203.4.17:3389 established.
[ rdpclient 634] [ 11.566993] Turn keepalive on.
[ rdpclient 634] [ 11.567777] Free ram after buffers allocation: 916036 KB.
[ rdpclient 634] [ 11.652417] Process RDP server certificate.
[ rdpclient 634] [ 11.652553] RDP5 encryption (X.509).
Any ideas what can be wrong?
Thanks !!!