No sound and no USB redirection with Raspberry Pi 2

All about WTware on Raspberry. Wtware works with Raspberry Pi 3 Model B and Pi 2 Model B devices
http://www.winterminal.com
xybrek
Posts: 4
Joined: Thu Sep 29, 2016 2:56 pm

No sound and no USB redirection with Raspberry Pi 2

Postby xybrek » Thu Sep 29, 2016 3:16 pm

Hello, I just installed WTware on my Raspberry Pi 2, it works fine however the problem is there is no sound and no USB redirection.
I tried to plug a USB flash drive into Raspberry PI 2 port and the Remote Windows machine cannot detect the USB.

What configuration is needed to make USB work and also make sound work.

aka
SUPPORT
SUPPORT
Posts: 527
Joined: Fri Dec 03, 2004 2:05 pm
Contact:

Re: No sound and no USB redirection with Raspberry Pi 2

Postby aka » Thu Sep 29, 2016 4:40 pm

What configuration is needed to make USB work

In terminal configuration file specify

Code: Select all

disk=usb


and also make sound work.

Onboard sound at RPi should be enabled in config.txt at SD card now. To edit config.txt, you can use a browser, http://[terminal-ip]/

# Enable onboard audio (HDMI or jack).
dtparam=audio=on


and the sound option should be on

Code: Select all

sound=on

xybrek
Posts: 4
Joined: Thu Sep 29, 2016 2:56 pm

Re: No sound and no USB redirection with Raspberry Pi 2

Postby xybrek » Thu Sep 29, 2016 7:01 pm

Thanks aka, it works now.

dwillis75
Posts: 1
Joined: Thu Feb 02, 2017 2:32 am

Re: No sound and no USB redirection with Raspberry Pi 2

Postby dwillis75 » Thu Feb 02, 2017 2:35 am

I'm having almost the exact same problem, except that I have dtparam=audio=on uncommented in my config.txt. I can get audio to work, but only if I first run the Sound Test from the terminal information page. If I simply log in from the RPi 3, I can move the sound control, but no sound comes through until I run the test.

aka
SUPPORT
SUPPORT
Posts: 527
Joined: Fri Dec 03, 2004 2:05 pm
Contact:

Re: No sound and no USB redirection with Raspberry Pi 2

Postby aka » Thu Feb 02, 2017 1:16 pm

1. Reboot.
2. Log into Windows. Play sound from Windows. Can you hear it?
3. Run Test Sound. Can you hear it?
4. Play sound from Windows again. Can you hear it?
5. Take terminal log http://wtware.com/logs.html and send it to support@wtware.com


Return to “WTware on Raspberry Pi 3 / Raspberry Pi 2”

Who is online

Users browsing this forum: No registered users and 2 guests