How to change IP setting & TFTP server remotely ?

All about WTware on Raspberry. WTware works with Raspberry Pi 4, Raspberry Pi 3B+, Pi 3 and Pi 2 devices
http://www.winterminal.com
Post Reply
nicodep
Posts: 27
Joined: Tue Aug 16, 2016 2:26 pm

How to change IP setting & TFTP server remotely ?

Post by nicodep »

Hi Aka,

I test your wtware solution with PI3 and it's fantastic !

Question : how to change remotely PI3 tcp IP from IP static to DHCP, and modify TFTP server IP ?
I can accces localy via DEL touch ... but remotely ?

Thk
;)
aka
SUPPORT
SUPPORT
Posts: 939
Joined: Fri Dec 03, 2004 2:05 pm
Contact:

Re: How to change IP setting & TFTP server remotely ?

Post by aka »

Sorry, there is no access to these settings.
nicodep
Posts: 27
Joined: Tue Aug 16, 2016 2:26 pm

Re: How to change IP setting & TFTP server remotely ?

Post by nicodep »

Hi Aka,

Same question because i have now 80 PI3 in different shop and we change local router
I need to change remotely PI3 IP TCP config from static to DHCP ?


;)
aka
SUPPORT
SUPPORT
Posts: 939
Joined: Fri Dec 03, 2004 2:05 pm
Contact:

Re: How to change IP setting & TFTP server remotely ?

Post by aka »

No way :( The same problem will be with updating to newer wtware version.
Write 80 new SD cards and ask users to replace.
J1mbo
Posts: 57
Joined: Mon Mar 14, 2016 6:24 pm

Re: How to change IP setting & TFTP server remotely ?

Post by J1mbo »

Worth noting that network boot is now working, so new SD cards are not needed anymore (once RPi firmware is updated though).
nicodep
Posts: 27
Joined: Tue Aug 16, 2016 2:26 pm

Re: How to change IP setting & TFTP server remotely ?

Post by nicodep »

J1mbo wrote:Worth noting that network boot is now working, so new SD cards are not needed anymore (once RPi firmware is updated though).
Hi J1mbo, can you explain your solution ?
for info, i can't add parameter on each shop because the dhcp is inside the router

;)
J1mbo
Posts: 57
Joined: Mon Mar 14, 2016 6:24 pm

Re: How to change IP setting & TFTP server remotely ?

Post by J1mbo »

I would configure the router for DHCP relay in that case to your central location.
Post Reply