Page 2 of 2

Re: How to distinct

Posted: Thu Sep 29, 2016 4:17 pm
by aka
I have no ideas :( Both interactions look similar.
Can you make the same sniffs in 192.168.63 network?

Re: How to distinct

Posted: Thu Sep 29, 2016 5:43 pm
by nicodep
The problem seems to be the MTU !
In my MPLS network SFR, the MTU is limited to 978 (without overload)

Raspberry strength and customer size to 1360 ...
Can you reduce the size of packets to the client ? 950 max

;)

Re: TFTP Problem with Wan MPLS Access

Posted: Fri Sep 30, 2016 1:30 pm
by aka
1. You can reduce mtu by 026 DHCP option.
2. I do not think it's MTU. It's related to IP ports, or service fields. Error packet (number 6581 in "Capture1 wan KO.pcapng") passed to WTware. TFTP server sent it from 69 port. OACK packets (3817, 3814 e.t.c) from port 57416 with length less then 100 bytes did not pass to WTware.

Re: TFTP Problem with Wan MPLS Access

Posted: Mon Oct 17, 2016 11:37 am
by nicodep
Hi Aka,

It's really not possible to connect PI3 in HTTP mode to download config from Wtware server ?
Because impossible to run with TFTP protocol in my Wlan

;)

Re: TFTP Problem with Wan MPLS Access

Posted: Mon Oct 24, 2016 1:22 am
by aka
Please, try: http://pxe.ru/files/testing/201610240221.zip
Untitled.png
Untitled.png (10.84 KiB) Viewed 10600 times

Re: TFTP Problem with Wan MPLS Access

Posted: Mon Oct 24, 2016 1:47 pm
by nicodep
Wonderfull
it works great !

Is this a test version ? or official soon ?

Great job Aka
;)

Re: TFTP Problem with Wan MPLS Access

Posted: Wed Nov 09, 2016 2:33 am
by aka
Official 5.4.54 released.

Re: TFTP Problem with Wan MPLS Access

Posted: Wed Nov 09, 2016 2:01 pm
by J1mbo
Should be faster at remote sites too as there is no windowing in TFTP. Good job :)

Re: TFTP Problem with Wan MPLS Access

Posted: Sun Dec 18, 2016 9:12 pm
by nicodep
Hello Aka,

Could include in the next version the option boot via HTTP in "Boot SD card" maker
This function run great but i need to manually modify this option on each PI3

Thk !

;)

Re: TFTP Problem with Wan MPLS Access

Posted: Wed Feb 08, 2017 8:21 pm
by nicodep
nicodep wrote:Could include in the next version the option boot via HTTP in "Boot SD card" maker
This function run great but i need to manually modify this option on each PI3
Hi Aka, just to remember this tips for your next version !

Thk

;)

Re: TFTP Problem with Wan MPLS Access

Posted: Fri Mar 03, 2017 12:36 pm
by aka
We'll do it, thanks.