Thanks, here it is inline. Attachments don't seem to be possible (always "invalid extension: (whatever)".
Code: Select all
15-55-54-764| [wtc.exe] Terminal will restart now.
15-56-01-627| [TFTP] Got RRQ, 48 bytes.
15-56-01-630| [TFTP] 00000000: 35 2e 34 2e 33 34 2f 6b 65 72 6e 65 6c 37 2e 69
15-56-01-632| [TFTP] 00000010: 6d 67 00 6f 63 74 65 74 00 74 69 6d 65 6f 75 74
15-56-01-635| [TFTP] 00000020: 00 35 00 62 6c 6b 73 69 7a 65 00 31 34 36 38 00
15-56-01-637| [TFTP] Request block size 1468, forced to 1360.
15-56-01-639| [TFTP] Requests file "5.4.34\kernel7.img". Tsize is not requested, blksize 1360 bytes.
15-56-01-642| [TFTP] Sending OASK (blksize 1360).
15-56-05-257| [TFTP] Transfer of file "5.4.34\kernel7.img" completed.
15-56-05-260| [TFTP] Connection closed.
15-56-17-047| [TFTP] Got RRQ, 219 bytes.
15-56-17-050| [TFTP] 00000000: 57 54 77 61 72 65 20 76 2e 35 2e 34 2e 33 34 20
15-56-17-052| [TFTP] 00000010: 61 74 20 42 38 3a 32 37 3a 45 42 3a 34 41 3a 37
15-56-17-054| [TFTP] 00000020: 39 3a 46 31 2c 20 64 68 63 70 3d 31 30 2e 33 2e
15-56-17-055| [TFTP] 00000030: 30 2e 32 32 32 2c 20 70 6c 61 74 66 6f 72 6d 3d
15-56-17-056| [TFTP] 00000040: 50 69 32 42 2c 20 69 70 3d 31 30 2e 33 2e 36 2e
15-56-17-057| [TFTP] 00000050: 36 34 2c 20 73 69 67 6e 3d 31 36 31 43 44 36 39
15-56-17-059| [TFTP] 00000060: 30 32 46 36 30 44 43 42 45 36 38 38 38 44 41 37
15-56-17-060| [TFTP] 00000070: 38 31 44 38 44 31 44 45 37 45 30 39 34 35 43 38
15-56-17-062| [TFTP] 00000080: 30 46 33 35 34 33 37 34 37 43 38 37 31 34 36 36
15-56-17-063| [TFTP] 00000090: 31 31 39 34 45 34 32 30 35 35 33 37 35 46 43 36
15-56-17-065| [TFTP] 000000a0: 33 46 37 42 34 42 32 42 45 32 35 34 41 39 46 44
15-56-17-065| [TFTP] 000000b0: 34 30 31 36 36 41 32 46 46 43 45 45 42 39 34 44
15-56-17-067| [TFTP] 000000c0: 46 34 44 38 32 31 31 46 45 44 41 31 34 34 33 45
15-56-17-068| [TFTP] 000000d0: 36 35 45 44 37 34 45 30 39 2e 00
15-56-17-070| [TFTP] WTware v.5.4.34 found at host [], mac B8:27:EB:4A:79:F1.
15-56-17-121| [TFTP] Sending WTware TFTP version.
15-56-17-121| [TFTP] Got RRQ, 45 bytes.
15-56-17-123| [TFTP] 00000000: 45 76 65 72 79 6f 6e 65 2f 6c 69 73 74 2e 77 74
15-56-17-123| [TFTP] 00000010: 63 00 6f 63 74 65 74 00 74 73 69 7a 65 00 30 00
15-56-17-125| [TFTP] 00000020: 62 6c 6b 73 69 7a 65 00 31 34 30 30 00
15-56-17-126| [TFTP] Request block size 1400, forced to 1360.
15-56-17-128| [TFTP] Requests file "Everyone\list.wtc". Tsize is requested, blksize 1360 bytes.
15-56-17-128| [TFTP] Sending OASK (tsize 1209, blksize 1360).
15-56-17-130| [TFTP] Transfer of file "Everyone\list.wtc" completed.
15-56-17-130| [TFTP] Connection closed.
15-56-17-132| [TFTP] Got RRQ, 66 bytes.
15-56-17-133| [TFTP] 00000000: 54 65 72 6d 69 6e 61 6c 73 2f 42 38 2e 32 37 2e
15-56-17-135| [TFTP] 00000010: 45 42 2e 34 41 2e 37 39 2e 46 31 2f 63 6f 6e 66
15-56-17-135| [TFTP] 00000020: 69 67 2e 77 74 63 00 6f 63 74 65 74 00 74 73 69
15-56-17-137| [TFTP] 00000030: 7a 65 00 30 00 62 6c 6b 73 69 7a 65 00 31 34 30
15-56-17-138| [TFTP] 00000040: 30 00
15-56-17-139| [TFTP] Request block size 1400, forced to 1360.
15-56-17-140| [TFTP] Requests file "Terminals\B8.27.EB.4A.79.F1\config.wtc". Tsize is requested, blksize 1360 bytes.
15-56-17-142| [TFTP] Sending OASK (tsize 80, blksize 1360).
15-56-17-142| [TFTP] Transfer of file "Terminals\B8.27.EB.4A.79.F1\config.wtc" completed.
15-56-17-144| [TFTP] Connection closed.
15-56-17-144| [TFTP] Got RRQ, 44 bytes.
15-56-17-146| [TFTP] 00000000: 45 76 65 72 79 6f 6e 65 2f 61 6c 6c 2e 77 74 63
15-56-17-147| [TFTP] 00000010: 00 6f 63 74 65 74 00 74 73 69 7a 65 00 30 00 62
15-56-17-148| [TFTP] 00000020: 6c 6b 73 69 7a 65 00 31 34 30 30 00
15-56-17-149| [TFTP] Request block size 1400, forced to 1360.
15-56-17-151| [TFTP] Requests file "Everyone\all.wtc". Tsize is requested, blksize 1360 bytes.
15-56-17-151| [TFTP] Sending OASK (tsize 196, blksize 1360).
15-56-17-153| [TFTP] Transfer of file "Everyone\all.wtc" completed.
15-56-17-154| [TFTP] Connection closed.
15-56-17-155| [TFTP] Got RRQ, 47 bytes.
15-56-17-156| [TFTP] 00000000: 45 76 65 72 79 6f 6e 65 2f 77 74 77 61 72 65 2e
15-56-17-158| [TFTP] 00000010: 6c 69 63 00 6f 63 74 65 74 00 74 73 69 7a 65 00
15-56-17-158| [TFTP] 00000020: 30 00 62 6c 6b 73 69 7a 65 00 31 34 30 30 00
15-56-17-160| [TFTP] Request block size 1400, forced to 1360.
15-56-17-160| [TFTP] Requests file "Everyone\wtware.lic". Tsize is requested, blksize 1360 bytes.
15-56-17-162| [TFTP] Sending OASK (tsize 281, blksize 1360).
15-56-17-163| [TFTP] Transfer of file "Everyone\wtware.lic" completed.
15-56-17-164| [TFTP] Connection closed.
15-56-17-165| [TFTP] Got RRQ, 57 bytes.
15-56-17-167| [TFTP] 00000000: 54 65 6d 70 6c 61 74 65 73 2f 4e 65 77 2d 44 6f
15-56-17-168| [TFTP] 00000010: 6d 61 69 6e 2d 4f 6e 6c 79 2e 77 74 63 00 6f 63
15-56-17-169| [TFTP] 00000020: 74 65 74 00 74 73 69 7a 65 00 30 00 62 6c 6b 73
15-56-17-170| [TFTP] 00000030: 69 7a 65 00 31 34 30 30 00
15-56-17-172| [TFTP] Request block size 1400, forced to 1360.
15-56-17-172| [TFTP] Requests file "Templates\[removed]". Tsize is requested, blksize 1360 bytes.
15-56-17-174| [TFTP] Sending OASK (tsize 208, blksize 1360).
15-56-17-175| [TFTP] Transfer of file "Templates\[removed]" completed.
15-56-17-176| [TFTP] Connection closed.
15-57-19-314| WTware v.5.4.34/RPi supervisor.
15-57-19-314| WTC listener is active.
15-57-19-314| WTC broadcast listener is active.
15-57-19-314| [ KERNEL] [ 0.000000] Booting Linux on physical CPU 0x0
15-57-19-314| [ KERNEL] [ 0.000000] Initializing cgroup subsys cpuset
15-57-19-314| [ KERNEL] [ 0.000000] Initializing cgroup subsys cpu
15-57-19-314| [ KERNEL] [ 0.000000] Initializing cgroup subsys cpuacct
15-57-19-314| [ KERNEL] [ 0.000000] Linux version 4.4.14 (aka@c12) (gcc version 5.3.1 20160413 (Ubuntu/Linaro 5.3.1-14ubuntu2) ) #8 SMP Mon Jul 11 00:32:40 SAMT 2016
15-57-19-314| [ KERNEL] [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
15-57-19-314| [ KERNEL] [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
15-57-19-314| [ KERNEL] [ 0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
15-57-19-314| [ KERNEL] [ 0.000000] cma: Reserved 8 MiB at 0x3a800000
15-57-19-314| [ KERNEL] [ 0.000000] Memory policy: Data cache writealloc
15-57-19-314| [ KERNEL] [ 0.000000] On node 0 totalpages: 241664
15-57-19-314| [ KERNEL] [ 0.000000] free_area_init_node: node 0, pgdat 808be480, node_mem_map b9fa6000
15-57-19-314| [ KERNEL] [ 0.000000] Normal zone: 2124 pages used for memmap
15-57-19-314| [ KERNEL] [ 0.000000] Normal zone: 0 pages reserved
15-57-19-314| [ KERNEL] [ 0.000000] Normal zone: 241664 pages, LIFO batch:31
15-57-19-314| [ KERNEL] [ 0.000000] [bcm2709_smp_init_cpus] enter (94c0->f3003010)
15-57-19-314| [ KERNEL] [ 0.000000] [bcm2709_smp_init_cpus] ncores=4
15-57-19-314| [ KERNEL] [ 0.000000] PERCPU: Embedded 11 pages/cpu @b9f6b000 s12428 r8192 d24436 u45056
15-57-19-314| [ KERNEL] [ 0.000000] pcpu-alloc: s12428 r8192 d24436 u45056 alloc=11*4096
15-57-19-314| [ KERNEL] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
15-57-19-314| [ KERNEL] [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 239540
15-57-19-314| [ KERNEL] [ 0.000000] Kernel command line: 8250.nr_uarts=1 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2709.boardrev=0xa02082 bcm2709.serial=0x4a79f1 smsc95xx.macaddr=B8:27:EB:4A:79:F1 bcm2708_fb.fbswap=1 bcm2709.uart_clock=48000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 console=ttyAMA0,115200 console=tty1 quiet
15-57-19-314| [ KERNEL] [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
15-57-19-314| [ KERNEL] [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
15-57-19-314| [ KERNEL] [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
15-57-19-314| [ KERNEL] [ 0.000000] Memory: 939564K/966656K available (3759K kernel code, 164K rwdata, 1164K rodata, 3836K init, 365K bss, 18900K reserved, 8192K cma-reserved)
15-57-19-314| [ KERNEL] [ 0.000000] Virtual kernel memory layout:
15-57-19-314| [ KERNEL] [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
15-57-19-314| [ KERNEL] [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
15-57-19-314| [ KERNEL] [ 0.000000] vmalloc : 0xbb800000 - 0xff800000 (1088 MB)
15-57-19-314| [ KERNEL] [ 0.000000] lowmem : 0x80000000 - 0xbb000000 ( 944 MB)
15-57-19-314| [ KERNEL] [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
15-57-19-314| [ KERNEL] [ 0.000000] .text : 0x80008000 - 0x804d6fac (4924 kB)
15-57-19-314| [ KERNEL] [ 0.000000] .init : 0x804d7000 - 0x80896000 (3836 kB)
15-57-19-314| [ KERNEL] [ 0.000000] .data : 0x80896000 - 0x808bf368 ( 165 kB)
15-57-19-314| [ KERNEL] [ 0.000000] .bss : 0x808c2000 - 0x8091d50c ( 366 kB)
15-57-19-314| [ KERNEL] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
15-57-19-314| [ KERNEL] [ 0.000000] Hierarchical RCU implementation.
15-57-19-314| [ KERNEL] [ 0.000000] Build-time adjustment of leaf fanout to 32.
15-57-19-314| [ KERNEL] [ 0.000000] NR_IRQS:16 nr_irqs:16 16
15-57-19-314| [ KERNEL] [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
15-57-19-314| [ KERNEL] [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
15-57-19-314| [ KERNEL] [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
15-57-19-314| [ KERNEL] [ 0.000023] Switching to timer-based delay loop, resolution 52ns
15-57-19-314| [ KERNEL] [ 0.000193] Console: colour dummy device 80x30
15-57-19-314| [ KERNEL] [ 0.000370] console [tty1] enabled
15-57-19-314| [ KERNEL] [ 0.000392] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
15-57-19-314| [ KERNEL] [ 0.000410] pid_max: default: 32768 minimum: 301
15-57-19-314| [ KERNEL] [ 0.000532] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
15-57-19-314| [ KERNEL] [ 0.000543] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
15-57-19-314| [ KERNEL] [ 0.001426] Disabling cpuset control group subsystem
15-57-19-314| [ KERNEL] [ 0.001455] Initializing cgroup subsys io
15-57-19-314| [ KERNEL] [ 0.001480] Initializing cgroup subsys memory
15-57-19-314| [ KERNEL] [ 0.001514] Initializing cgroup subsys devices
15-57-19-314| [ KERNEL] [ 0.001530] Initializing cgroup subsys freezer
15-57-19-314| [ KERNEL] [ 0.001569] CPU: Testing write buffer coherency: ok
15-57-19-314| [ KERNEL] [ 0.002017] CPU0: update cpu_capacity 1024
15-57-19-314| [ KERNEL] [ 0.002029] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
15-57-19-314| [ KERNEL] [ 0.002038] [bcm2709_smp_prepare_cpus] enter
15-57-19-314| [ KERNEL] [ 0.002122] Setting up static identity map for 0x8240 - 0x8274
15-57-19-314| [ KERNEL] [ 0.003469] [bcm2709_boot_secondary] cpu:1 started (0) 17
15-57-19-314| [ KERNEL] [ 0.003672] [bcm2709_secondary_init] enter cpu:1
15-57-19-314| [ KERNEL] [ 0.003711] CPU1: update cpu_capacity 1024
15-57-19-314| [ KERNEL] [ 0.003717] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
15-57-19-314| [ KERNEL] [ 0.004053] [bcm2709_boot_secondary] cpu:2 started (0) 17
15-57-19-314| [ KERNEL] [ 0.004206] [bcm2709_secondary_init] enter cpu:2
15-57-19-314| [ KERNEL] [ 0.004225] CPU2: update cpu_capacity 1024
15-57-19-314| [ KERNEL] [ 0.004231] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
15-57-19-314| [ KERNEL] [ 0.004537] [bcm2709_boot_secondary] cpu:3 started (0) 17
15-57-19-314| [ KERNEL] [ 0.004673] [bcm2709_secondary_init] enter cpu:3
15-57-19-314| [ KERNEL] [ 0.004692] CPU3: update cpu_capacity 1024
15-57-19-314| [ KERNEL] [ 0.004698] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
15-57-19-314| [ KERNEL] [ 0.004751] Brought up 4 CPUs
15-57-19-314| [ KERNEL] [ 0.004772] SMP: Total of 4 processors activated (153.60 BogoMIPS).
15-57-19-314| [ KERNEL] [ 0.004780] CPU: All CPU(s) started in HYP mode.
15-57-19-314| [ KERNEL] [ 0.004786] CPU: Virtualization extensions available.
15-57-19-314| [ KERNEL] [ 0.005170] devtmpfs: initialized
15-57-19-314| [ KERNEL] [ 0.013770] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
15-57-19-314| [ KERNEL] [ 0.014111] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
15-57-19-314| [ KERNEL] [ 0.014590] pinctrl core: initialized pinctrl subsystem
15-57-19-314| [ KERNEL] [ 0.014986] NET: Registered protocol family 16
15-57-19-314| [ KERNEL] [ 0.020133] DMA: preallocated 4096 KiB pool for atomic coherent allocations
15-57-19-314| [ KERNEL] [ 0.026616] Serial: AMBA PL011 UART driver
15-57-19-314| [ KERNEL] [ 0.026809] uart-pl011 3f201000.uart: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
15-57-19-314| [ KERNEL] [ 0.027017] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
15-57-19-314| [ KERNEL] [ 0.091099] bcm2835-dma 3f007000.dma: missing interrupts-names property in device tree - legacy interpretation is used
15-57-19-314| [ KERNEL] [ 0.092714] usbcore: registered new interface driver usbfs
15-57-19-314| [ KERNEL] [ 0.092848] usbcore: registered new interface driver hub
15-57-19-314| [ KERNEL] [ 0.092940] usbcore: registered new device driver usb
15-57-19-314| [ KERNEL] [ 0.100101] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-04-24 17:58
15-57-19-314| [ KERNEL] [ 0.112122] clocksource: Switched to clocksource arch_sys_counter
15-57-19-314| [ KERNEL] [ 0.124449] NET: Registered protocol family 2
15-57-19-314| [ KERNEL] [ 0.125015] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
15-57-19-314| [ KERNEL] [ 0.125127] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
15-57-19-314| [ KERNEL] [ 0.125315] TCP: Hash tables configured (established 8192 bind 8192)
15-57-19-314| [ KERNEL] [ 0.125413] UDP hash table entries: 512 (order: 2, 16384 bytes)
15-57-19-314| [ KERNEL] [ 0.125460] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
15-57-19-314| [ KERNEL] [ 0.125654] NET: Registered protocol family 1
15-57-19-314| [ KERNEL] [ 2.110559] futex hash table entries: 1024 (order: 4, 65536 bytes)
15-57-19-314| [ KERNEL] [ 2.160560] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
15-57-19-314| [ KERNEL] [ 2.160588] io scheduler noop registered
15-57-19-314| [ KERNEL] [ 2.160606] io scheduler deadline registered (default)
15-57-19-314| [ KERNEL] [ 2.165458] BCM2708FB: allocated DMA memory fac00000
15-57-19-314| [ KERNEL] [ 2.165484] bcm2708_fb soc:fb: couldn't allocate a DMA channel
15-57-19-314| [ KERNEL] [ 2.165541] bcm2708_fb soc:fb: probe failed, err -19
15-57-19-314| [ KERNEL] [ 3.167392] bcm2835-rng 3f104000.rng: hwrng registered
15-57-19-314| [ KERNEL] [ 3.167662] vc-cma: Videocore CMA driver
15-57-19-314| [ KERNEL] [ 3.167672] vc-cma: vc_cma_base = 0x00000000
15-57-19-314| [ KERNEL] [ 3.167680] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
15-57-19-314| [ KERNEL] [ 3.167688] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
15-57-19-314| [ KERNEL] [ 3.167925] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
15-57-19-314| [ KERNEL] [ 3.170251] vchiq: vchiq_init_state: slot_zero = 0xbac00000, is_master = 0
15-57-19-314| [ KERNEL] [ 3.174387] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
15-57-19-314| [ KERNEL] [ 3.374747] Core Release: 2.80a
15-57-19-314| [ KERNEL] [ 3.374767] Setting default values for core params
15-57-19-314| [ KERNEL] [ 3.374800] Finished setting default values for core params
15-57-19-314| [ KERNEL] [ 3.575228] Using Buffer DMA mode
15-57-19-314| [ KERNEL] [ 3.575240] Periodic Transfer Interrupt Enhancement - disabled
15-57-19-314| [ KERNEL] [ 3.575247] Multiprocessor Interrupt Enhancement - disabled
15-57-19-314| [ KERNEL] [ 3.575256] OTG VER PARAM: 0, OTG VER FLAG: 0
15-57-19-314| [ KERNEL] [ 3.575285] Dedicated Tx FIFOs mode
15-57-19-314| [ KERNEL] [ 3.575665] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xbac48000 dma = 0xfac48000 len=9024
15-57-19-314| [ KERNEL] [ 3.575695] FIQ FSM acceleration enabled for :
15-57-19-314| [ KERNEL] [ 3.575695] Non-periodic Split Transactions
15-57-19-314| [ KERNEL] [ 3.575695] Periodic Split Transactions
15-57-19-314| [ KERNEL] [ 3.575695] High-Speed Isochronous Endpoints
15-57-19-314| [ KERNEL] [ 3.575695] Interrupt/Control Split Transaction hack enabled
15-57-19-314| [ KERNEL] [ 3.575717] dwc_otg: Microframe scheduler enabled
15-57-19-314| [ KERNEL] [ 3.575763] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x802590f0
15-57-19-314| [ KERNEL] [ 3.575777] WARN::hcd_init_fiq:414: FIQ ASM at 0x80259454 length 36
15-57-19-314| [ KERNEL] [ 3.575792] WARN::hcd_init_fiq:439: MPHI regs_base at 0xbb90a000
15-57-19-314| [ KERNEL] [ 3.575849] dwc_otg 3f980000.usb: DWC OTG Controller
15-57-19-314| [ KERNEL] [ 3.575885] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
15-57-19-314| [ KERNEL] [ 3.575916] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
15-57-19-314| [ KERNEL] [ 3.575965] Init: Port Power? op_state=1
15-57-19-314| [ KERNEL] [ 3.575972] Init: Power Port (0)
15-57-19-314| [ KERNEL] [ 3.576139] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
15-57-19-314| [ KERNEL] [ 3.576152] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
15-57-19-314| [ KERNEL] [ 3.576164] usb usb1: Product: DWC OTG Controller
15-57-19-314| [ KERNEL] [ 3.576175] usb usb1: Manufacturer: Linux 4.4.14 dwc_otg_hcd
15-57-19-314| [ KERNEL] [ 3.576186] usb usb1: SerialNumber: 3f980000.usb
15-57-19-314| [ KERNEL] [ 3.576895] hub 1-0:1.0: USB hub found
15-57-19-314| [ KERNEL] [ 3.576940] hub 1-0:1.0: 1 port detected
15-57-19-314| [ KERNEL] [ 3.577379] dwc_otg: FIQ enabled
15-57-19-314| [ KERNEL] [ 3.577387] dwc_otg: NAK holdoff enabled
15-57-19-314| [ KERNEL] [ 3.577394] dwc_otg: FIQ split-transaction FSM enabled
15-57-19-314| [ KERNEL] [ 3.577478] Module dwc_common_port init
15-57-19-314| [ KERNEL] [ 3.578546] bcm2835-cpufreq: min=600000 max=1200000
15-57-19-314| [ KERNEL] [ 3.580864] sdhost: log_buf @ bac46000 (fac46000)
15-57-19-314| [ KERNEL] [ 3.652137] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
15-57-19-314| [ KERNEL] [ 3.674577] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
15-57-19-314| [ KERNEL] [ 3.674588] mmc-bcm2835 3f300000.mmc: Forcing PIO mode
15-57-19-314| [ KERNEL] [ 3.709076] mmc0: host does not support reading read-only switch, assuming write-enable
15-57-19-314| [ KERNEL] [ 3.710962] mmc0: new high speed SDHC card at address 59b4
15-57-19-314| [ KERNEL] [ 3.711280] mmcblk0: mmc0:59b4 USD00 29.5 GiB
15-57-19-314| [ KERNEL] [ 3.712366] hidraw: raw HID events driver (C) Jiri Kosina
15-57-19-314| [ KERNEL] [ 3.712789] mmcblk0: p1
15-57-19-314| [ KERNEL] [ 3.712835] usbcore: registered new interface driver usbhid
15-57-19-314| [ KERNEL] [ 3.712840] usbhid: USB HID core driver
15-57-19-314| [ KERNEL] [ 3.713211] NET: Registered protocol family 17
15-57-19-314| [ KERNEL] [ 3.713390] Registering SWP/SWPB emulation handler
15-57-19-314| [ KERNEL] [ 3.713738] registered taskstats version 1
15-57-19-314| [ KERNEL] [ 3.713785] vc-sm: Videocore shared memory driver
15-57-19-314| [ KERNEL] [ 3.713792] [vc_sm_connected_init]: start
15-57-19-314| [ KERNEL] [ 3.721643] [vc_sm_connected_init]: end - returning 0
15-57-19-314| [ KERNEL] [ 3.723999] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
15-57-19-314| [ KERNEL] [ 3.727062] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
15-57-19-314| [ KERNEL] [ 3.728552] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
15-57-19-314| [ KERNEL] [ 3.730040] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
15-57-19-314| [ KERNEL] [ 3.732739] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
15-57-19-314| [ KERNEL] [ 3.735140] console [ttyAMA0] enabled
15-57-19-314| [ KERNEL] [ 3.738637] Freeing unused kernel memory: 3836K (804d7000 - 80896000)
15-57-19-314| [ KERNEL] [ 3.772491] Indeed it is in host mode hprt0 = 00021501
15-57-19-314| [ KERNEL] [ 3.819812] mmc1: new high speed SDIO card at address 0001
15-57-19-314| [ KERNEL] [ 3.952143] usb 1-1: new high-speed USB device number 2 using dwc_otg
15-57-19-314| [ KERNEL] [ 3.952229] Indeed it is in host mode hprt0 = 00001101
15-57-19-314| [ hotplug] [ 4.014132] Block device 179:1. No action.
15-57-19-314| [ hotplug] [ 4.018835] Block device 179:0. No action.
15-57-19-314| [ pfac] [ 4.044534] Run /sbin/initrd.
15-57-19-314| [ pfac] [ 4.044702] Ok, PID 532.
15-57-19-314| [ initrd] [ 4.046366] WTware shell v.5.4.34/RPi
15-57-19-314| [ initrd] [ 4.046533] misc.cpp ( 211): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
15-57-19-314| [ KERNEL] [ 4.152256] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
15-57-19-314| [ KERNEL] [ 4.152267] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
15-57-19-314| [ KERNEL] [ 4.152651] hub 1-1:1.0: USB hub found
15-57-19-314| [ KERNEL] [ 4.152713] hub 1-1:1.0: 5 ports detected
15-57-19-314| [ KERNEL] [ 4.432129] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
15-57-19-314| [ KERNEL] [ 4.532244] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
15-57-19-314| [ KERNEL] [ 4.532251] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
15-57-19-314| [ KERNEL] [ 4.612128] usb 1-1.4: new low-speed USB device number 4 using dwc_otg
15-57-19-314| [ KERNEL] [ 4.717199] usb 1-1.4: New USB device found, idVendor=413c, idProduct=301a
15-57-19-314| [ KERNEL] [ 4.717207] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
15-57-19-314| [ KERNEL] [ 4.717213] usb 1-1.4: Product: Dell MS116 USB Optical Mouse
15-57-19-314| [ KERNEL] [ 4.717219] usb 1-1.4: Manufacturer: PixArt
15-57-19-314| [ KERNEL] [ 4.720697] input: PixArt Dell MS116 USB Optical Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:413C:301A.0001/input/input0
15-57-19-314| [ KERNEL] [ 4.720935] hid-generic 0003:413C:301A.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-3f980000.usb-1.4/input0
15-57-19-314| [ KERNEL] [ 4.952127] usb 1-1.5: new high-speed USB device number 5 using dwc_otg
15-57-19-314| [ KERNEL] [ 5.067997] usb 1-1.5: New USB device found, idVendor=413c, idProduct=1010
15-57-19-314| [ KERNEL] [ 5.068005] usb 1-1.5: New USB device strings: Mfr=0, Product=11, SerialNumber=0
15-57-19-314| [ KERNEL] [ 5.068011] usb 1-1.5: Product: USB 2.0 Hub [MTT]
15-57-19-314| [ KERNEL] [ 5.069741] hub 1-1.5:1.0: USB hub found
15-57-19-314| [ KERNEL] [ 5.071365] hub 1-1.5:1.0: 4 ports detected
15-57-19-314| [ KERNEL] [ 5.352125] usb 1-1.5.4: new low-speed USB device number 6 using dwc_otg
15-57-19-314| [ KERNEL] [ 5.476051] usb 1-1.5.4: New USB device found, idVendor=413c, idProduct=2110
15-57-19-314| [ KERNEL] [ 5.476059] usb 1-1.5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
15-57-19-314| [ KERNEL] [ 5.476065] usb 1-1.5.4: Product: Dell Wired Multimedia Keyboard
15-57-19-314| [ KERNEL] [ 5.476070] usb 1-1.5.4: Manufacturer: Dell
15-57-19-314| [ KERNEL] [ 5.505914] input: Dell Dell Wired Multimedia Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5.4/1-1.5.4:1.0/0003:413C:2110.0002/input/input1
15-57-19-314| [ KERNEL] [ 5.562541] hid-generic 0003:413C:2110.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell Wired Multimedia Keyboard] on usb-3f980000.usb-1.5.4/input0
15-57-19-314| [ KERNEL] [ 5.601534] input: Dell Dell Wired Multimedia Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5.4/1-1.5.4:1.1/0003:413C:2110.0003/input/input2
15-57-19-314| [ KERNEL] [ 5.652447] hid-generic 0003:413C:2110.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [Dell Dell Wired Multimedia Keyboard] on usb-3f980000.usb-1.5.4/input1
15-57-19-314| [ initrd] [ 5.890507] Load ethernet drivers.
15-57-19-314| [ initrd] [ 5.890599] modprobe smsc95xx.
15-57-19-314| [ KERNEL] [ 5.896818] smsc95xx v1.0.4
15-57-19-314| [ KERNEL] [ 5.953728] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:4a:79:f1
15-57-19-314| [ KERNEL] [ 5.953833] usbcore: registered new interface driver smsc95xx
15-57-19-314| [ KERNEL] [ 6.013154] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
15-57-19-314| [ KERNEL] [ 8.376113] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
15-57-19-314| [ initrd] [ 8.870090] dhcp: 405 bytes from [removed]
15-57-19-314| [ initrd] [ 8.870175] 00000000:0000018100000000001100000a0306010a030640004300440181000002010600 ..................@.C.D........
15-57-19-314| [ initrd] [ 8.870242] 00000020:67458b6b00000000000000000a0306400a0300e30a030601b827eb4a79f10000 gE.k...........@.........'.Jy...
15-57-19-314| [ initrd] [ 8.870309] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
15-57-19-314| [ initrd] [ 8.870374] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
15-57-19-314| [ KERNEL] [ 10.324338] random: nonblocking pool is initialized
15-57-19-314| [ initrd] [ 10.350078] dhcp: 405 bytes from [removed]
15-57-19-314| [ initrd] [ 10.350150] 00000000:0000018100000000001100000a0306010a030640004300440181000002010600 ..................@.C.D........
15-57-19-314| [ initrd] [ 10.350215] 00000020:67458b6b00000000000000000a0306400a0300e30a030601b827eb4a79f10000 gE.k...........@.........'.Jy...
15-57-19-314| [ initrd] [ 10.350279] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
15-57-19-314| [ initrd] [ 10.350343] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
15-57-19-314| [ initrd] [ 10.380055] dhcp: server address [removed]
15-57-19-314| [ initrd] [ 10.380114] dhcp: [removed]
15-57-19-314| [ initrd] [ 10.380169] dhcp: default gateway [removed]
15-57-19-314| [ initrd] [ 10.380233] dhcp: DNS [removed]
15-57-19-314| [ initrd] [ 10.380289] dhcp: DNS [removed]
15-57-19-314| [ initrd] [ 10.380344] dhcp: domain [removed]
15-57-19-314| [ initrd] [ 10.380400] dhcp: TFTP from 066 [removed]
15-57-19-314| [ initrd] [ 10.380454] dhcp: TFTP [removed]
15-57-19-314| [ initrd] [ 10.380508] dhcp: boot file (067) 5.4.34/wtware.pxe.
15-57-19-314| [ initrd] [ 10.380564] TFTP binary "5.4.34/", configs prefix "", using "/" slash.
15-57-19-314| [ initrd] [ 10.380619] dhcp: wtpassword hash [removed]
15-57-19-314| Send broadcast WTCU discover.
15-57-19-314| [ initrd] [ 10.386727] Run '/sbin/httpd', log '/tmp/httpd.out', env '', pid ''.
15-57-19-314| [ pfac] [ 10.386836] Run /sbin/httpd.
15-57-19-314| [ pfac] [ 10.387066] Ok, PID 573.
15-57-19-314| [ httpd] [ 10.389851] HTTP Server, WTware v.5.4.34/RPi
15-57-19-314| [ initrd] [ 10.446761] USB: 0424:9514 Standard Microsystems Corp. SMC9514 Hub.
15-57-19-314| [ initrd] [ 10.446857] USB: 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter.
15-57-19-314| [ initrd] [ 10.446897] USB: 413c:301a Dell Computer Corp..
15-57-19-314| [ initrd] [ 10.446933] USB: 413c:1010 Dell Computer Corp..
15-57-19-314| [ initrd] [ 10.446969] USB: 413c:2110 Dell Computer Corp..
15-57-19-314| [ initrd] [ 10.447005] [TFTP]: download file Everyone/list.wtc from [removed]
15-57-19-314| [ initrd] [ 10.452952] WTware TFTP v.5.4.34.
15-57-19-314| /--- FILE "/tmp/list.wtc" -----------------------
15-57-19-314| | #
15-57-19-314| | # Include files list.
15-57-19-314| | #
15-57-19-314| | # This way of terminals configuration is meant only for manual
15-57-19-314| | # terminals management. Graphic configurator doesn't read list.wtc,
15-57-19-314| | # doesn't read or edit files from ListIncludes directory. So be careful
15-57-19-314| | # not to configure one terminal in configurator and in list.wtc.
15-57-19-314| | #
15-57-19-314| | # This file uses such syntax:
15-57-19-314| | #
15-57-19-314| | # 01.02.03.04.05.06[([username@][terminalname])] [file [file ...]]] [# note]
15-57-19-314| | #
15-57-19-314| | # Examples:
15-57-19-314| | #
15-57-19-314| | # 02.03.04.05.06.07 file1
15-57-19-314| | #
15-57-19-314| | # It means that terminal with MAC-address 02.03.04.05.06.07
15-57-19-314| | # reads parameters from file ListIncludes/file1.
15-57-19-314| | #
15-57-19-314| | #
15-57-19-314| | # 03.04.05.06.07.08(vasja@) file2
15-57-19-314| | #
15-57-19-314| | # It means that terminal with MAC-address 03.04.05.06.07.08
15-57-19-314| | # reads parameters from file ListIncludes/file2
15-57-19-314| | # and sets user name "vasja" in "Windows login" window.
15-57-19-314| | #
15-57-19-314| | #
15-57-19-314| | # 04.05.06.07.08.09(term5) file6 file7 # John notebook.
15-57-19-314| | #
15-57-19-314| | # It means that terminal with MAC-address 04.05.06.07.08.09
15-57-19-314| | # is named term5, the same as specify clienthostname parameter,
15-57-19-314| | # and it reads parameters from files ListIncludes/file6 and
15-57-19-314| | # ListIncludes/file7.
15-57-19-314| | #
15-57-19-314| | #
15-57-19-314| | # To specify user name using non-latin letters open this file in
15-57-19-314| | # Notepad and save with Encoding: Unicode.
15-57-19-314| | #
15-57-19-314| \----------------------------------------------------
15-57-19-314| [ initrd] [ 10.461830] [TFTP]: download file Terminals/B8.27.EB.4A.79.F1/config.wtc from [removed]
15-57-19-314| /--- FILE "/tmp/config.wtc" -----------------------
15-57-19-314| | template [removed]
15-57-19-314| | connection
15-57-19-314| \----------------------------------------------------
15-57-19-314| [ initrd] [ 10.464157] [TFTP]: download file Everyone/all.wtc from [removed]
15-57-19-314| /--- FILE "/tmp/all.wtc" -----------------------
15-57-19-314| | [BOM]
15-57-19-314| | graphic=abcdfg
15-57-19-314| | sound=on
15-57-19-314| | timezone=GMT Standard Time
15-57-19-314| | bpp=32
15-57-19-314| | keyboard=en-gb
15-57-19-314| | sleep=10,poweroff
15-57-19-314| \----------------------------------------------------
15-57-19-314| [ initrd] [ 10.466251] [TFTP]: download file Everyone/wtware.lic from [removed]
15-57-19-314| [ initrd] [ 10.468652] [TFTP]: download file Templates/[removed] from [removed]
15-57-19-314| /--- FILE "/tmp/tmp.wtc" -----------------------
15-57-19-314| | [BOM]
15-57-19-314| | loadbalanceinfo=tsv://MS Terminal Services Plugin.1.RD-SESSION-HOSTS
15-57-19-314| | server=[removed]
15-57-19-314| \----------------------------------------------------
15-57-19-314| /--- FILE "/etc/config.compiled" -----------------------
15-57-19-314| | [BOM]
15-57-19-314| | graphic=abcdfg
15-57-19-314| | sound=on
15-57-19-314| | timezone=GMT Standard Time
15-57-19-314| | bpp=32
15-57-19-314| | keyboard=en-gb
15-57-19-314| | sleep=10,poweroff
15-57-19-314| | loadbalanceinfo=tsv://MS Terminal Services Plugin.1.RD-SESSION-HOSTS
15-57-19-314| | server=[removed]
15-57-19-314| | connection
15-57-19-314| \----------------------------------------------------
15-57-19-314| [ initrd] [ 10.471178] Hostname: "wtwB827EB4A79F1".
15-57-19-314| Everyone can control terminal by RSH.
15-57-19-314| RSH: listener is active.
15-57-19-314| Send broadcast WTCU discover.
15-57-19-314| [ httpd] [ 10.665094] Reread settings.
15-57-19-314| [ httpd] [ 10.665157] Everyone can control terminal by HTTP.
15-57-19-314| [ gm] [ 10.665181] WTware session manager v.5.4.34/RPi.
15-57-19-314| [ gm] [ 10.665220] fstream.cpp ( 277): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
15-57-19-314| [ gm] [ 10.665259] misc.cpp ( 22): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
15-57-19-314| [ gm] [ 10.665298] Add keyboard event2: Dell Dell Wired Multimedia Keyboard.
15-57-19-314| [ gm] [ 10.665336] Add keyboard event1: Dell Dell Wired Multimedia Keyboard.
15-57-19-314| [ gm] [ 10.720067] EV_REL flag found. Add mouse event0: PixArt Dell MS116 USB Optical Mouse.
15-57-19-314| [ gm] [ 10.720233] graphdriver_f_fb.cpp ( 602): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
15-57-19-314| [ gm] [ 10.720300] Display mode: 1024x768, 16 bit, 0 Hz, modeline "", DDC enabled, connector 0.
15-57-19-314| [ gm] [ 13.722461] graphdriver_f_fb.cpp ( 538): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
15-57-19-314| [ gm] [ 13.722543] graphdriver_f.cpp ( 323): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
15-57-19-314| [ gm] [ 13.722609] graphconsole.cpp ( 630): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
15-57-19-314| [ gm] [ 13.722818] Caught signal SIGSEGV.
15-57-19-314| [ pfac] [ 13.900483] Process pid 532 terminated, status 00000000.
15-57-19-314| [ pfac] [ 13.900604] uds.h ( 63): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
15-57-19-314| [ pfac] [ 13.900670] hotplug.h ( 85): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
15-57-19-316| Connection from wtc.exe at 10.3.0.227.
15-57-20-592| [ KERNEL] [ 73.995093] usb 1-1.4: USB disconnect, device number 4
15-57-22-118| [ KERNEL] [ 75.512135] usb 1-1.4: new low-speed USB device number 7 using dwc_otg
15-57-22-318| [ KERNEL] [ 75.617537] usb 1-1.4: New USB device found, idVendor=413c, idProduct=301a
15-57-22-320| [ KERNEL] [ 75.617545] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
15-57-22-321| [ KERNEL] [ 75.617551] usb 1-1.4: Product: Dell MS116 USB Optical Mouse
15-57-22-323| [ KERNEL] [ 75.617557] usb 1-1.4: Manufacturer: PixArt
15-57-22-323| [ KERNEL] [ 75.620734] input: PixArt Dell MS116 USB Optical Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:413C:301A.0004/input/input3
15-57-22-325| [ KERNEL] [ 75.620979] hid-generic 0003:413C:301A.0004: input,hidraw0: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-3f980000.usb-1.4/input0
15-57-22-326| [ hotplug] [ 75.621468] uds.h ( 63): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
15-57-22-328| [ hotplug] [ 75.621547] hotplug.h ( 85): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.