by ng-spde » Fri Dec 09, 2022 4:09 pm
Hi, I'm playing with some older Fujitsu Terminals, currently with a Futro S740.
The Terminals are fast, consumes less then 10W and they are easily available in large quantities on ebay and they are cheaper than a Pi based solution. They could be a good choice for WTware, if everything works..
And everything works so far, except of the microphone jack on the frontside couldn't be used.
Sound card is recognized as hw:0:0 and sound=on,hw:0:0 sound works as expected,
but microphone=on or micrphone=on,hw:0:0 doesn't.
Using an external USB-Audio-Card detected as hw:2:0 sound and mic works without problems.
Mixer shows:
numid=18,iface=CARD,name='Front Headphone Jack'
; type=BOOLEAN,access=r-------,values=1
: values=off
..
It would be great if the internal sound card could be used, it would save some money and it hasn't the problem that it's id would change, if somebody connects a usb headset for linphone..
Maybe someone has an idea.
Regards,
Joerg
Hi, I'm playing with some older Fujitsu Terminals, currently with a Futro S740.
The Terminals are fast, consumes less then 10W and they are easily available in large quantities on ebay and they are cheaper than a Pi based solution. They could be a good choice for WTware, if everything works..
And everything works so far, except of the microphone jack on the frontside couldn't be used.
Sound card is recognized as hw:0:0 and sound=on,hw:0:0 sound works as expected,
but microphone=on or micrphone=on,hw:0:0 doesn't.
Using an external USB-Audio-Card detected as hw:2:0 sound and mic works without problems.
Mixer shows:
numid=18,iface=CARD,name='Front Headphone Jack'
; type=BOOLEAN,access=r-------,values=1
: values=off
..
It would be great if the internal sound card could be used, it would save some money and it hasn't the problem that it's id would change, if somebody connects a usb headset for linphone..
Maybe someone has an idea.
Regards,
Joerg