18-06-44-071| [wtc.exe] Failed to connect to 192.168.1.109:779.
18-13-50-620| [DHCP] Processing DHCPDISCOVER package...
18-13-50-620| [DHCP] Determine IP for DISCOVER...
18-13-50-620| [DHCP] Sending ARP to check if IP 192.168.1.109 is busy...
18-13-50-932| [DHCP] IP 192.168.1.109 for MAC B8:27:EB:9D:34:A7 determined from terminalDHCP parameters.
18-13-50-932| [DHCP] Stored in catalog IP 192.168.1.109 for MAC B8:27:EB:9D:34:A7
18-13-50-948| [DHCP] Send DHCPOFFER IP: 192.168.1.109.
18-13-50-948| [DHCP] Sent 315 bytes to 192.168.1.109:68.
18-19-59-785| WTware 6.0.56/RPi supervisor.
18-19-59-785| [ KERNEL] [ 0.000000] Booting Linux on physical CPU 0xf00
18-19-59-785| [ KERNEL] [ 0.000000] Linux version 5.10.50-v7 (aka@c22) (arm-linux-gnueabihf-gcc (Debian 8.3.0-2) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #7 SMP Tue Jul 20 19:46:08 UTC 2021
18-19-59-785| [ KERNEL] [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
18-19-59-785| [ KERNEL] [ 0.000000] CPU: div instructions available: patching division code
18-19-59-785| [ KERNEL] [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
18-19-59-785| [ KERNEL] [ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B Rev 1.1
18-19-59-785| [ KERNEL] [ 0.000000] Memory policy: Data cache writealloc
18-19-59-785| [ KERNEL] [ 0.000000] Reserved memory: created CMA memory pool at 0x36000000, size 64 MiB
18-19-59-785| [ KERNEL] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
18-19-59-785| [ KERNEL] [ 0.000000] Zone ranges:
18-19-59-785| [ KERNEL] [ 0.000000] DMA [mem 0x0000000000000000-0x0000000039ffffff]
18-19-59-785| [ KERNEL] [ 0.000000] Normal empty
18-19-59-785| [ KERNEL] [ 0.000000] Movable zone start for each node
18-19-59-785| [ KERNEL] [ 0.000000] Early memory node ranges
18-19-59-785| [ KERNEL] [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000039ffffff]
18-19-59-785| [ KERNEL] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000039ffffff]
18-19-59-785| [ KERNEL] [ 0.000000] On node 0 totalpages: 237568
18-19-59-785| [ KERNEL] [ 0.000000] DMA zone: 1856 pages used for memmap
18-19-59-785| [ KERNEL] [ 0.000000] DMA zone: 0 pages reserved
18-19-59-785| [ KERNEL] [ 0.000000] DMA zone: 237568 pages, LIFO batch:63
18-19-59-785| [ KERNEL] [ 0.000000] percpu: Embedded 15 pages/cpu s29580 r8192 d23668 u61440
18-19-59-785| [ KERNEL] [ 0.000000] pcpu-alloc: s29580 r8192 d23668 u61440 alloc=15*4096
18-19-59-785| [ KERNEL] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
18-19-59-785| [ KERNEL] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 235712
18-19-59-785| [ KERNEL] [ 0.000000] Kernel command line: coherent_pool=1M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbdepth=32 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 quiet wtboot=mmc
18-19-59-785| [ KERNEL] [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
18-19-59-785| [ KERNEL] [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
18-19-59-785| [ KERNEL] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
18-19-59-785| [ KERNEL] [ 0.000000] Memory: 865888K/950272K available (5120K kernel code, 572K rwdata, 736K rodata, 3072K init, 355K bss, 18848K reserved, 65536K cma-reserved)
18-19-59-785| [ KERNEL] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
18-19-59-785| [ KERNEL] [ 0.000000] rcu: Hierarchical RCU implementation.
18-19-59-785| [ KERNEL] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
18-19-59-785| [ KERNEL] [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
18-19-59-785| [ KERNEL] [ 0.000000] random: get_random_bytes called from 0x80700bac with crng_init=0
18-19-59-785| [ KERNEL] [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
18-19-59-785| [ KERNEL] [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
18-19-59-785| [ KERNEL] [ 0.000010] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
18-19-59-785| [ KERNEL] [ 0.000027] Switching to timer-based delay loop, resolution 52ns
18-19-59-785| [ KERNEL] [ 0.000247] Console: colour dummy device 80x30
18-19-59-785| [ KERNEL] [ 0.000319] printk: console [tty0] enabled
18-19-59-785| [ KERNEL] [ 0.000373] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
18-19-59-785| [ KERNEL] [ 0.000398] pid_max: default: 32768 minimum: 301
18-19-59-785| [ KERNEL] [ 0.000640] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
18-19-59-785| [ KERNEL] [ 0.000664] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
18-19-59-785| [ KERNEL] [ 0.001535] CPU: Testing write buffer coherency: ok
18-19-59-785| [ KERNEL] [ 0.001933] CPU0: update cpu_capacity 1024
18-19-59-785| [ KERNEL] [ 0.001948] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
18-19-59-785| [ KERNEL] [ 0.002640] Setting up static identity map for 0x100000 - 0x10003c
18-19-59-785| [ KERNEL] [ 0.002780] rcu: Hierarchical SRCU implementation.
18-19-59-785| [ KERNEL] [ 0.003255] smp: Bringing up secondary CPUs ...
18-19-59-785| [ KERNEL] [ 0.004197] CPU1: update cpu_capacity 1024
18-19-59-785| [ KERNEL] [ 0.004210] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
18-19-59-785| [ KERNEL] [ 0.005229] CPU2: update cpu_capacity 1024
18-19-59-785| [ KERNEL] [ 0.005241] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
18-19-59-785| [ KERNEL] [ 1.040598] CPU3: failed to come online
18-19-59-785| [ KERNEL] [ 1.040688] smp: Brought up 1 node, 3 CPUs
18-19-59-785| [ KERNEL] [ 1.040700] SMP: Total of 3 processors activated (115.20 BogoMIPS).
18-19-59-785| [ KERNEL] [ 1.040708] CPU: All CPU(s) started in HYP mode.
18-19-59-785| [ KERNEL] [ 1.040715] CPU: Virtualization extensions available.
18-19-59-785| [ KERNEL] [ 1.041434] devtmpfs: initialized
18-19-59-785| [ KERNEL] [ 1.055607] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
18-19-59-785| [ KERNEL] [ 1.056175] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
18-19-59-785| [ KERNEL] [ 1.056210] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
18-19-59-785| [ KERNEL] [ 1.059280] pinctrl core: initialized pinctrl subsystem
18-19-59-785| [ KERNEL] [ 1.061352] NET: Registered protocol family 16
18-19-59-785| [ KERNEL] [ 1.064213] DMA: preallocated 1024 KiB pool for atomic coherent allocations
18-19-59-785| [ KERNEL] [ 1.071978] thermal_sys: Registered thermal governor 'step_wise'
18-19-59-785| [ KERNEL] [ 1.073015] Serial: AMBA PL011 UART driver
18-19-59-785| [ KERNEL] [ 1.088392] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
18-19-59-785| [ KERNEL] [ 1.100897] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-04-21T15:49:36, variant start
18-19-59-785| [ KERNEL] [ 1.110880] raspberrypi-firmware soc:firmware: Firmware hash is a48d332c35ee1c1c1ab433228e23317f62dcc5fb
18-19-59-785| [ KERNEL] [ 1.174061] cryptd: max_cpu_qlen set to 1000
18-19-59-785| [ KERNEL] [ 1.178381] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1
18-19-59-785| [ KERNEL] [ 1.182216] usbcore: registered new interface driver usbfs
18-19-59-785| [ KERNEL] [ 1.182404] usbcore: registered new interface driver hub
18-19-59-785| [ KERNEL] [ 1.182511] usbcore: registered new device driver usb
18-19-59-785| [ KERNEL] [ 1.185399] clocksource: Switched to clocksource arch_sys_counter
18-19-59-785| [ KERNEL] [ 1.205261] NET: Registered protocol family 2
18-19-59-785| [ KERNEL] [ 1.205736] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
18-19-59-785| [ KERNEL] [ 1.207408] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
18-19-59-785| [ KERNEL] [ 1.207450] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
18-19-59-785| [ KERNEL] [ 1.207566] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
18-19-59-785| [ KERNEL] [ 1.207755] TCP: Hash tables configured (established 8192 bind 8192)
18-19-59-785| [ KERNEL] [ 1.207941] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
18-19-59-785| [ KERNEL] [ 1.208004] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
18-19-59-785| [ KERNEL] [ 1.208283] NET: Registered protocol family 1
18-19-59-785| [ KERNEL] [ 2.457354] Initialise system trusted keyrings
18-19-59-785| [ KERNEL] [ 2.457524] workingset: timestamp_bits=30 max_order=18 bucket_order=0
18-19-59-785| [ KERNEL] [ 2.631921] Key type asymmetric registered
18-19-59-785| [ KERNEL] [ 2.631945] Asymmetric key parser 'x509' registered
18-19-59-785| [ KERNEL] [ 2.632084] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
18-19-59-785| [ KERNEL] [ 2.634390] bcm2708_fb soc:fb: FB found 1 display(s)
18-19-59-785| [ KERNEL] [ 2.683854] Console: switching to colour frame buffer device 240x67
18-19-59-785| [ KERNEL] [ 2.723024] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1920x1080
18-19-59-785| [ KERNEL] [ 2.730392] bcm2835-rng 3f104000.rng: hwrng registered
18-19-59-785| [ KERNEL] [ 2.731168] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
18-19-59-785| [ KERNEL] [ 2.739931] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
18-19-59-785| [ KERNEL] [ 2.745563] zram: Added device: zram0
18-19-59-785| [ KERNEL] [ 2.748732] libphy: Fixed MDIO Bus: probed
18-19-59-785| [ KERNEL] [ 2.748839] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
18-19-59-785| [ KERNEL] [ 3.477288] Core Release: 2.80a
18-19-59-785| [ KERNEL] [ 3.477309] Setting default values for core params
18-19-59-785| [ KERNEL] [ 3.477353] Finished setting default values for core params
18-19-59-785| [ KERNEL] [ 3.677717] Using Buffer DMA mode
18-19-59-785| [ KERNEL] [ 3.677729] Periodic Transfer Interrupt Enhancement - disabled
18-19-59-785| [ KERNEL] [ 3.677737] Multiprocessor Interrupt Enhancement - disabled
18-19-59-785| [ KERNEL] [ 3.677752] OTG VER PARAM: 0, OTG VER FLAG: 0
18-19-59-785| [ KERNEL] [ 3.677807] Dedicated Tx FIFOs mode
18-19-59-785| [ KERNEL] [ 3.678747]
18-19-59-785| [ KERNEL] [ 3.678777] WARN::dwc_otg_hcd_init
FIQ DMA bounce buffers: virt = b6114000 dma = 0xf6114000 len=9024
18-19-59-785| [ KERNEL] [ 3.678817] FIQ FSM acceleration enabled for :
18-19-59-785| [ KERNEL] [ 3.678817] Non-periodic Split Transactions
18-19-59-785| [ KERNEL] [ 3.678817] Periodic Split Transactions
18-19-59-785| [ KERNEL] [ 3.678817] High-Speed Isochronous Endpoints
18-19-59-785| [ KERNEL] [ 3.678817] Interrupt/Control Split Transaction hack enabled
18-19-59-785| [ KERNEL] [ 3.678829] dwc_otg: Microframe scheduler enabled
18-19-59-785| [ KERNEL] [ 3.678883]
18-19-59-785| [ KERNEL] [ 3.678895] WARN::hcd_init_fiq:457: FIQ on core 1
18-19-59-785| [ KERNEL] [ 3.678902]
18-19-59-785| [ KERNEL] [ 3.678913] WARN::hcd_init_fiq:458: FIQ ASM at 80426308 length 36
18-19-59-785| [ KERNEL] [ 3.678922]
18-19-59-785| [ KERNEL] [ 3.678932] WARN::hcd_init_fiq:497: MPHI regs_base at ba810000
18-19-59-785| [ KERNEL] [ 3.678962] dwc_otg 3f980000.usb: DWC OTG Controller
18-19-59-785| [ KERNEL] [ 3.679006] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
18-19-59-785| [ KERNEL] [ 3.679066] dwc_otg 3f980000.usb: irq 89, io mem 0x00000000
18-19-59-785| [ KERNEL] [ 3.679122] Init: Port Power? op_state=1
18-19-59-785| [ KERNEL] [ 3.679130] Init: Power Port (0)
18-19-59-785| [ KERNEL] [ 3.679396] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
18-19-59-785| [ KERNEL] [ 3.679411] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
18-19-59-785| [ KERNEL] [ 3.679424] usb usb1: Product: DWC OTG Controller
18-19-59-785| [ KERNEL] [ 3.679436] usb usb1: Manufacturer: Linux 5.10.50-v7 dwc_otg_hcd
18-19-59-785| [ KERNEL] [ 3.679446] usb usb1: SerialNumber: 3f980000.usb
18-19-59-785| [ KERNEL] [ 3.680450] hub 1-0:1.0: USB hub found
18-19-59-785| [ KERNEL] [ 3.680539] hub 1-0:1.0: 1 port detected
18-19-59-785| [ KERNEL] [ 3.682170] dwc_otg: FIQ enabled
18-19-59-785| [ KERNEL] [ 3.682188] dwc_otg: NAK holdoff enabled
18-19-59-785| [ KERNEL] [ 3.682196] dwc_otg: FIQ split-transaction FSM enabled
18-19-59-785| [ KERNEL] [ 3.682304] Module dwc_common_port init
18-19-59-785| [ KERNEL] [ 3.690936] usbcore: registered new interface driver usbtouchscreen
18-19-59-785| [ KERNEL] [ 3.693579] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
18-19-59-785| [ KERNEL] [ 3.694698] sdhci: Secure Digital Host Controller Interface driver
18-19-59-785| [ KERNEL] [ 3.694714] sdhci: Copyright(c) Pierre Ossman
18-19-59-785| [ KERNEL] [ 3.695881] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
18-19-59-785| [ KERNEL] [ 3.696146] sdhci-pltfm: SDHCI platform and OF driver helper
18-19-59-785| [ KERNEL] [ 3.696706] hid: raw HID events driver (C) Jiri Kosina
18-19-59-785| [ KERNEL] [ 3.699619] usbcore: registered new interface driver usbhid
18-19-59-785| [ KERNEL] [ 3.699644] usbhid: USB HID core driver
18-19-59-785| [ KERNEL] [ 3.746978] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
18-19-59-785| [ KERNEL] [ 3.747010] [vc_sm_connected_init]: start
18-19-59-785| [ KERNEL] [ 3.756148] [vc_sm_connected_init]: installed successfully
18-19-59-785| [ KERNEL] [ 3.756773] NET: Registered protocol family 17
18-19-59-785| [ KERNEL] [ 3.757309] Registering SWP/SWPB emulation handler
18-19-59-785| [ KERNEL] [ 3.761415] Loading compiled-in X.509 certificates
18-19-59-785| [ KERNEL] [ 3.764184] uart-pl011 3f201000.serial: cts_event_workaround enabled
18-19-59-785| [ KERNEL] [ 3.764332] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 114, base_baud = 0) is a PL011 rev2
18-19-59-785| [ KERNEL] [ 3.768000] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
18-19-59-785| [ KERNEL] [ 3.782160] sdhost: log_buf @ (ptrval) (f6113000)
18-19-59-785| [ KERNEL] [ 3.805727] Indeed it is in host mode hprt0 = 00021501
18-19-59-785| [ KERNEL] [ 3.879257] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
18-19-59-785| [ KERNEL] [ 3.885841] of_cfs_init
18-19-59-785| [ KERNEL] [ 3.886080] of_cfs_init: OK
18-19-59-785| [ KERNEL] [ 3.891682] random: fast init done
18-19-59-785| [ KERNEL] [ 3.905694] Freeing unused kernel memory: 3072K
18-19-59-785| [ KERNEL] [ 3.955858] Run /init as init process
18-19-59-785| [ KERNEL] [ 3.955873] with arguments:
18-19-59-785| [ KERNEL] [ 3.955880] /init
18-19-59-785| [ KERNEL] [ 3.955887] with environment:
18-19-59-785| [ KERNEL] [ 3.955896] HOME=/
18-19-59-785| [ KERNEL] [ 3.955902] TERM=linux
18-19-59-785| [ KERNEL] [ 3.955912] wtboot=mmc
18-19-59-785| [ KERNEL] [ 3.969185] mmc0: host does not support reading read-only switch, assuming write-enable
18-19-59-785| [ KERNEL] [ 3.972946] mmc0: new high speed SDHC card at address aaaa
18-19-59-785| [ KERNEL] [ 3.974099] mmcblk0: mmc0:aaaa SC32G 29.7 GiB
18-19-59-785| [ KERNEL] [ 3.976967] mmcblk0: p1
18-19-59-785| [ KERNEL] [ 4.015525] usb 1-1: new high-speed USB device number 2 using dwc_otg
18-19-59-785| [ KERNEL] [ 4.015760] Indeed it is in host mode hprt0 = 00001101
18-19-59-785| [ KERNEL] [ 4.255800] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
18-19-59-785| [ KERNEL] [ 4.255828] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
18-19-59-785| [ KERNEL] [ 4.256844] hub 1-1:1.0: USB hub found
18-19-59-785| [ KERNEL] [ 4.257031] hub 1-1:1.0: 5 ports detected
18-19-59-785| [ pfac] [ 4.313379] Run /sbin/initrd.
18-19-59-785| [ pfac] [ 4.313839] Ok, PID 662.
18-19-59-785| [ initrd] [ 4.319749] WTware 6.0.56/RPi shell.
18-19-59-785| [ initrd] [ 4.320592] Load font 'ter-c32b.psf', console 120x33.
18-19-59-785| [ initrd] [ 4.370526] HDD/MMC/SD boot.
18-19-59-785| [ initrd] [ 4.370773] No device '/dev/fb1'.
18-19-59-785| [ initrd] [ 4.443032] Success: /dev/mmcblk0p1 mounted to /bootmedia.
18-19-59-785| /--- FILE "/bootmedia/config.txt" -----------------------
18-19-59-785| | # For more options and information see:
18-19-59-785| | #
18-19-59-785| | #
https://www.raspberrypi.org/documentati ... /README.md
18-19-59-785| | #
18-19-59-785| | disable_overscan=1
18-19-59-785| | # Uncomment if hdmi display is not detected and composite is being output.
18-19-59-785| | #hdmi_force_hotplug=1
18-19-59-785| | # Force the monitor to HDMI mode so that sound will be sent over HDMI cable.
18-19-59-785| | #hdmi_drive=2
18-19-59-785| | # Uncomment to increase signal to HDMI, if you have interference, blanking, or
18-19-59-785| | # no display.
18-19-59-785| | #config_hdmi_boost=4
18-19-59-785| | # Uncomment to overclock the arm. 700 MHz is the default.
18-19-59-785| | #arm_freq=800
18-19-59-785| | gpu_mem=96
18-19-59-785| | disable_splash=1
18-19-59-785| | framebuffer_depth=32
18-19-59-785| | # Uncomment for 16-bit color.
18-19-59-785| | #framebuffer_depth=16
18-19-59-785| | # Enable onboard audio (HDMI or jack).
18-19-59-785| | dtparam=audio=on
18-19-59-785| | # Removes the warning overlay.
18-19-59-785| | #avoid_warnings=1
18-19-59-785| | # Additionally allows turbo when low-voltage is present.
18-19-59-785| | #avoid_warnings=2
18-19-59-785| | [pi4]
18-19-59-785| | max_framebuffers=2
18-19-59-785| | [all]
18-19-59-785| | # Uncomment these two lines to set display resolution:
18-19-59-785| | #hdmi_group=2
18-19-59-785| | #hdmi_mode=58
18-19-59-785| | #
18-19-59-785| | # Specify correct value in hdmi_mode= line from the list of valid values:
18-19-59-785| | # 800x600: hdmi_mode=9
18-19-59-785| | # 1024x768: hdmi_mode=16
18-19-59-785| | # 1280x1024: hdmi_mode=35
18-19-59-785| | # 1360x768: hdmi_mode=39
18-19-59-785| | # 1400x1050: hdmi_mode=42
18-19-59-785| | # 1440x900: hdmi_mode=47
18-19-59-785| | # 1600x1200: hdmi_mode=51
18-19-59-785| | # 1680x1050: hdmi_mode=58
18-19-59-785| | # 1366x768: hdmi_mode=81
18-19-59-785| | # 1920x1080: hdmi_mode=82
18-19-59-785| | # 1920x1200: hdmi_mode=69
18-19-59-785| | #
18-19-59-785| | # Find more resolutions in manual:
18-19-59-785| | #
https://www.raspberrypi.org/documentati ... t/video.md
18-19-59-785| | #
18-19-59-785| | # Uncomment six lines with such syntax and right hdmi_mode= values for
18-19-59-785| | # dual displays on Raspberry Pi 4:
18-19-59-785| | #
18-19-59-785| | #[HDMI:0]
18-19-59-785| | # hdmi_group=2
18-19-59-785| | # hdmi_mode=42
18-19-59-785| | #[HDMI:1]
18-19-59-785| | # hdmi_group=2
18-19-59-785| | # hdmi_mode=58
18-19-59-785| \----------------------------------------------------
18-19-59-785| [ KERNEL] [ 4.575438] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
18-19-59-785| [ KERNEL] [ 4.705786] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
18-19-59-785| [ KERNEL] [ 4.705808] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
18-19-59-785| [ KERNEL] [ 4.805436] usb 1-1.5: new low-speed USB device number 4 using dwc_otg
18-19-59-785| [ KERNEL] [ 4.946755] usb 1-1.5: New USB device found, idVendor=1bcf, idProduct=05cf, bcdDevice= 6.0b
18-19-59-785| [ KERNEL] [ 4.946775] usb 1-1.5: New USB device strings: Mfr=0, Product=2, SerialNumber=0
18-19-59-785| [ KERNEL] [ 4.946787] usb 1-1.5: Product: Si lverCrest STMS 2219 A1
18-19-59-785| [ KERNEL] [ 4.962824] input: Si lverCrest STMS 2219 A1 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:1BCF:05CF.0001/input/input0
18-19-59-785| [ KERNEL] [ 5.027152] hid-generic 0003:1BCF:05CF.0001: input,hidraw0: USB HID v1.00 Keyboard [Si lverCrest STMS 2219 A1] on usb-3f980000.usb-1.5/input0
18-19-59-785| [ KERNEL] [ 5.045801] input: Si lverCrest STMS 2219 A1 Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.1/0003:1BCF:05CF.0002/input/input1
18-19-59-785| [ KERNEL] [ 5.046404] input: Si lverCrest STMS 2219 A1 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.1/0003:1BCF:05CF.0002/input/input2
18-19-59-785| [ KERNEL] [ 5.047009] input: Si lverCrest STMS 2219 A1 Consumer Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.1/0003:1BCF:05CF.0002/input/input3
18-19-59-785| [ KERNEL] [ 5.126136] input: Si lverCrest STMS 2219 A1 System Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.1/0003:1BCF:05CF.0002/input/input4
18-19-59-785| [ KERNEL] [ 5.127269] hid-generic 0003:1BCF:05CF.0002: input,hiddev96,hidraw1: USB HID v1.00 Mouse [Si lverCrest STMS 2219 A1] on usb-3f980000.usb-1.5/input1
18-19-59-785| /--- FILE "/bootmedia/configs/initrd.wtc" -----------------------
18-19-59-785| | clientIP = *
18-19-59-785| | config = network
18-19-59-785| \----------------------------------------------------
18-19-59-785| [ initrd] [ 5.286353] Do not cache package files.
18-19-59-785| [ initrd] [ 5.286527] WTpassword empty.
18-19-59-785| [ initrd] [ 5.286646] Unpack /bootmedia/packages/pi2-lib.
18-19-59-785| [ initrd] [ 7.674159] USB: 1bcf:05cf Sunplus Innovation Technology Inc. Micro keyboard & mouse receiver.
18-19-59-785| [ initrd] [ 7.674515] USB: 0424:ec00 Microchip Technology, Inc. (formerly SMSC) SMSC9512/9514 Fast Ethernet Adapter.
18-19-59-785| [ initrd] [ 7.674718] USB: 0424:9514 Microchip Technology, Inc. (formerly SMSC) SMC9514 Hub.
18-19-59-785| [ initrd] [ 7.718146] Load Ethernet drivers.
18-19-59-785| [ initrd] [ 7.718456] modprobe lan78xx.
18-19-59-785| [ initrd] [ 7.732464] modprobe smsc95xx.
18-19-59-785| [ KERNEL] [ 7.736135] usbcore: registered new interface driver lan78xx
18-19-59-785| [ KERNEL] [ 7.752382] smsc95xx v2.0.0
18-19-59-785| [ KERNEL] [ 7.835245] libphy: smsc95xx-mdiobus: probed
18-19-59-785| [ KERNEL] [ 7.837252] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:9d:34:a7
18-19-59-785| [ KERNEL] [ 7.837586] usbcore: registered new interface driver smsc95xx
18-19-59-785| [ initrd] [ 7.895328] WTpassword empty.
18-19-59-785| [ KERNEL] [ 7.899141] Generic PHY usb-001:003:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=usb-001:003:01, irq=POLL)
18-19-59-785| [ KERNEL] [ 7.899733] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
18-19-59-785| [ KERNEL] [ 7.905352] smsc95xx 1-1.1:1.0 eth0: Link is Down
18-19-59-785| [ KERNEL] [ 9.996667] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off
18-19-59-785| [ initrd] [ 10.212941] dhcp: 576 bytes from 192.168.1.1.
18-19-59-785| [ initrd] [ 10.213110] 00000000:0000022C0000000000110000C0A80101C0A8016D00430044022C000002010600 ...,..............m.C.D.,......
18-19-59-785| [ initrd] [ 10.213261] 00000020:67458B6B0000000000000000C0A8016D0000000000000000B827EB9D34A70000 gE.k...........m.........'..4...
18-19-59-785| [ initrd] [ 10.213375] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
18-19-59-785| [ initrd] [ 10.213481] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
18-19-59-785| [ initrd] [ 10.213585] 00000080:0000000000000000000000000000000000000000000000000000000000000000 ................................
18-19-59-785| [ initrd] [ 10.213689] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................
18-19-59-785| [ initrd] [ 10.213792] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................
18-19-59-785| [ initrd] [ 10.213895] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................
18-19-59-785| [ initrd] [ 10.213998] 00000100:0000000000000000638253633501023604C0A801013304000138A70104FFFFFF ........c.Sc5..6.....3...8......
18-19-59-785| [ initrd] [ 10.214101] 00000120:000304C0A801010604C0A80101FF000000000000000000000000000000000000 ................................
18-19-59-785| [ initrd] [ 10.449032] dhcp: 343 bytes from 192.168.1.101.
18-19-59-785| [ initrd] [ 10.449174] 00000000:000001430000000000110000C0A80165C0A8016D004300440143000002010600 ...C..........e...m.C.D.C......
18-19-59-785| [ initrd] [ 10.449284] 00000020:67458B6B0000000000000000C0A8016DC0A8016500000000B827EB9D34A70000 gE.k...........m...e.....'..4...
18-19-59-785| [ initrd] [ 10.449395] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
18-19-59-785| [ initrd] [ 10.449502] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
18-19-59-785| [ initrd] [ 10.449609] 00000080:0000000000000000362E302E35365C6B65726E656C372E696D67000000000000 ........6.0.56\kernel7.img......
18-19-59-785| [ initrd] [ 10.449712] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................
18-19-59-785| [ initrd] [ 10.449815] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................
18-19-59-785| [ initrd] [ 10.449918] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................
18-19-59-785| [ initrd] [ 10.450064] 00000100:0000000000000000638253633501023604C0A801650104FFFFFF000604C0A801 ........c.Sc5..6....e...........
18-19-59-785| [ initrd] [ 10.450183] 00000120:011A0205DC420E3139322E3136382E312E313031004313362E302E35365C6B65 ....B.192.168.1.101.C6.0.56\ke
18-19-59-785| [ initrd] [ 10.450289] Discard second offer for 192.168.1.109.
18-19-59-785| [ initrd] [ 11.982665] dhcp: 576 bytes from 192.168.1.1.
18-19-59-785| [ initrd] [ 11.982832] 00000000:0000022C0000000000110000C0A80101C0A8016D00430044022C000002010600 ...,..............m.C.D.,......
18-19-59-785| [ initrd] [ 11.982952] 00000020:67458B6B0000000000000000C0A8016D0000000000000000B827EB9D34A70000 gE.k...........m.........'..4...
18-19-59-785| [ initrd] [ 11.983064] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
18-19-59-785| [ initrd] [ 11.983168] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
18-19-59-785| [ initrd] [ 11.983272] 00000080:0000000000000000000000000000000000000000000000000000000000000000 ................................
18-19-59-785| [ initrd] [ 11.983377] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................
18-19-59-785| [ initrd] [ 11.983480] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................
18-19-59-785| [ initrd] [ 11.983583] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................
18-19-59-785| [ initrd] [ 11.983689] 00000100:0000000000000000638253633501053604C0A801013304000151800104FFFFFF ........c.Sc5..6.....3...Q......
18-19-59-785| [ initrd] [ 11.983819] 00000120:000304C0A801010604C0A80101FF000000000000000000000000000000000000 ................................
18-19-59-785| [ initrd] [ 12.020152] [DHCP] DHCP server address 192.168.1.1.
18-19-59-785| [ initrd] [ 12.020284] [DHCP] IP 192.168.1.109 mask 255.255.255.0.
18-19-59-785| [ initrd] [ 12.020400] [DHCP] Default gateway 192.168.1.1.
18-19-59-785| [ initrd] [ 12.020515] [DHCP] DNS 192.168.1.1.
18-19-59-785| [ initrd] [ 12.020637] [DHCP] TFTP = DHCP 192.168.1.1.
18-19-59-785| [ initrd] [ 12.020755] [DHCP] TFTP 192.168.1.1.
18-19-59-785| [ initrd] [ 12.020869] [DHCP] No boot file from DHCP.
18-19-59-785| [ initrd] [ 12.020987] [DHCP] TFTP binary "", configs prefix "", using "/" slash.
18-19-59-785| WTC listener is active.
18-19-59-785| WTC broadcast listener is active.
18-19-59-785| Send broadcast WTCU discover.
18-19-59-785| [ pfac] [ 12.024723] Run /sbin/httpd.
18-19-59-785| [ initrd] [ 12.024881] Run '/sbin/httpd', log '/tmp/httpd.out', env '', pid ''.
18-19-59-785| [ pfac] [ 12.025040] Ok, PID 717.
18-19-59-785| [ initrd] [ 12.025117] [TFTP] Download config file Everyone/source.wtc from 192.168.1.1.
18-19-59-785| [ httpd] [ 12.040088] Internal HTTP Server, WTware 6.0.56/RPi
18-19-59-785| [ initrd] [ 12.530230] [TFTP] Got EAGAIN, resend wtware hello.
18-19-59-785| [ initrd] [ 13.040181] [TFTP] Got EAGAIN, resend wtware hello.
18-19-59-785| [ initrd] [ 13.550151] [TFTP] Got EAGAIN, resend wtware hello.
18-19-59-785| [ KERNEL] [ 14.055481] random: crng init done
18-19-59-785| [ initrd] [ 14.070293] [TFTP] Got EAGAIN, resend wtware hello.
18-19-59-785| [ initrd] [ 14.580165] [TFTP] Got EAGAIN, resend wtware hello.
18-19-59-785| [ initrd] [ 15.090140] [TFTP] Got EAGAIN, resend wtware hello.
18-19-59-785| [ initrd] [ 15.600141] [TFTP] Got EAGAIN, resend wtware hello.
18-19-59-785| [ initrd] [ 16.110135] [TFTP] Got EAGAIN, resend wtware hello.
18-19-59-785| [ initrd] [ 16.620138] [TFTP] Got EAGAIN, resend wtware hello.
18-19-59-785| [ initrd] [ 17.130126] [TFTP] Got EAGAIN, resend wtware hello.
18-19-59-785| [ initrd] [ 17.640143] [TFTP] recv() return -1, errno 11.
18-19-59-785| [ initrd] [ 30.350184] tftp.cpp ( 942): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
18-19-59-785| [ initrd] [ 30.350440] [TFTP] Download config file Everyone/list.wtc from 192.168.1.1.
18-19-59-785| [ initrd] [ 43.060166] tftp.cpp ( 942): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
18-19-59-785| [ initrd] [ 43.060403] [TFTP] Download config file Terminals/B8.27.EB.9D.34.A7/config.wtc from 192.168.1.1.
18-19-59-785| [ initrd] [ 55.770167] tftp.cpp ( 942): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
18-19-59-785| [ initrd] [ 55.770354] [TFTP] Download config file Terminals/B8.27.EB.9D.34.A7.wtc from 192.168.1.1.
18-19-59-785| [ initrd] [ 68.480150] tftp.cpp ( 942): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
18-19-59-785| [ initrd] [ 68.480319] [TFTP] Download config file Everyone/default.wtc from 192.168.1.1.
18-19-59-785| [ initrd] [ 81.190157] tftp.cpp ( 942): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
18-19-59-785| [ initrd] [ 81.190320] [TFTP] Download config file Everyone/all.wtc from 192.168.1.1.
18-19-59-785| [ initrd] [ 93.900158] tftp.cpp ( 942): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
18-19-59-785| [ initrd] [ 93.901202] Local config not found. Fatal error.
18-19-59-785| [ initrd] [ 98.210466] globalConfig.cpp ( 1157): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
18-19-59-785| [ initrd] [ 98.210652] [NTP] 42 DHCP option is not set.
18-19-59-785| Everyone can control terminal by RSH.
18-19-59-785| RSH: listener is active.
18-19-59-785| Send broadcast WTCU discover.
18-19-59-785| [ initrd] [ 98.217697] Start video wizard.
18-19-59-785| [ initrd] [ 98.217890] globalConfig.cpp ( 1157): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
18-19-59-785| [ httpd] [ 98.217986] Reread settings.
18-19-59-785| [ initrd] [ 98.218120] Unpack /bootmedia/packages/pi2-f.
18-19-59-785| [ httpd] [ 98.218199] Everyone can control terminal by HTTP.
18-19-59-785| [ gm] [ 98.759694] WTware 6.0.56/RPi session manager.
18-19-59-785| [ gm] [ 98.760686] Create empty config file.
18-19-59-785| [ gm] [ 98.761333] Keys found. Add event4: Si lverCrest STMS 2219 A1 System Control.
18-19-59-785| [ gm] [ 98.761490] EV_REL flag found. Add event3: Si lverCrest STMS 2219 A1 Consumer Control.
18-19-59-785| [ gm] [ 98.761631] EV_ABS flag found. Add event2: Si lverCrest STMS 2219 A1.
18-19-59-785| [ gm] [ 98.761762] EV_REL flag found. Add event1: Si lverCrest STMS 2219 A1 Mouse.
18-19-59-785| [ gm] [ 98.761908] Keys found. Add event0: Si lverCrest STMS 2219 A1.
18-19-59-785| [ gm] [ 98.762056] Display mode: 1920x1080, 32 bit, landscape, 0 Hz, modeline "", DDC enabled, connector 0.
18-19-59-785| [ gm] [ 100.339937] Framebuffer device found.
18-19-59-785| [ gm] [ 100.340235] LINELENBYTES 7680
18-19-59-785| [ gm] [ 100.340376] VLEN 8294400
18-19-59-785| [ gm] [ 100.345548] Use /lib/ui32.so.
18-19-59-785| [ gm] [ 100.346430] Wizard mode, choose server.
18-19-59-785| [ gm] [ 110.844765] Run '/sbin/resolver 0x1acebf0 dns [192.168.1.101]', log '', env '', pid ''.
18-19-59-785| [ pfac] [ 110.845491] Run /sbin/resolver 0x1acebf0 dns [192.168.1.101].
18-19-59-785| [ pfac] [ 110.845858] Ok, PID 718.
18-19-59-785| [ pfac] [ 110.857775] Process pid 718 terminated, status 00000000.
18-19-59-785| [ gm] [ 110.861905] 192.168.1.101 => 192.168.1.101.
18-19-59-785| [ gm] [ 110.874778] Free ram before fork terminal client /sbin/rdpclient (session 1): 895404 Kb.
18-19-59-785| [ pfac] [ 110.875752] Run /sbin/rdpclient 1.
18-19-59-785| [ gm] [ 110.875884] Run '/sbin/rdpclient 1', log '/tmp/rdpclient.out', env '', pid ''.
18-19-59-785| [ pfac] [ 110.876047] Ok, PID 719.
18-19-59-785| [ rdpclient 719] [ 110.901793] RDP Terminal Client, WTware 6.0.56/RPi, pipe 1, pid 719.
18-19-59-785| [ rdpclient 719] [ 110.902310] Use /lib/ui32.so.
18-19-59-785| [ rdpclient 719] [ 110.903428] tsclient-main.cpp ( 757): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
18-19-59-785| [ rdpclient 719] [ 110.904478] Make RDP session with 192.168.1.101, port 3389.
18-19-59-785| [ rdpclient 719] [ 110.904952] No username.
18-19-59-785| [ rdpclient 719] [ 110.905444] No password.
18-19-59-785| [ rdpclient 719] [ 110.905814] No PIN.
18-19-59-785| [ rdpclient 719] [ 110.906152] No domain.
18-19-59-785| [ rdpclient 719] [ 110.906456] No shell.
18-19-59-785| [ rdpclient 719] [ 110.906750] No directory.
18-19-59-785| [ rdpclient 719] [ 110.907059] Window: 1856x1080@24.
18-19-59-785| [ rdpclient 719] [ 110.907311] PFlags 0x0000002F.
18-19-59-785| [ rdpclient 719] [ 110.907574] Keyboard 00000409:00000000.
18-19-59-785| [ rdpclient 719] [ 110.907805] My hostname "ERROR".
18-19-59-785| [ rdpclient 719] [ 110.908054] TCP: connecting to 192.168.1.101:3389.
18-19-59-785| [ rdpclient 719] [ 140.936100] select () timed out.
18-19-59-785| [ rdpclient 719] [ 140.936363] rdpclient-tcp.cpp ( 260): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
18-19-59-785| [ rdpclient 719] [ 140.936526] Server 192.168.1.101, port 3389: connection rejected.
18-19-59-785| Make sure that terminal service works on this server.
18-19-59-785| Try to connect using mstsc.exe.
18-19-59-785| [ gm] [ 140.937142] Session is over. Final message: Server 192.168.1.101, port 3389: connection rejected.
18-19-59-785| Make sure that terminal service works on this server.
18-19-59-785| Try to connect using mstsc.exe.
18-19-59-785| [ pfac] [ 140.939194] Process pid 719 terminated, status 00000009.
18-19-59-785| [ gm] [ 152.920357] Run '/sbin/resolver 0x1acebf0 dns [192.168.1.1]', log '', env '', pid ''.
18-19-59-785| [ pfac] [ 152.921090] Run /sbin/resolver 0x1acebf0 dns [192.168.1.1].
18-19-59-785| [ pfac] [ 152.921572] Ok, PID 720.
18-19-59-785| [ pfac] [ 152.932240] Process pid 720 terminated, status 00000000.
18-19-59-785| [ gm] [ 152.937611] 192.168.1.1 => 192.168.1.1.
18-19-59-785| [ gm] [ 152.949823] Free ram before fork terminal client /sbin/rdpclient (session 2): 894908 Kb.
18-19-59-785| [ pfac] [ 152.950235] Run /sbin/rdpclient 2.
18-19-59-785| [ gm] [ 152.950370] Run '/sbin/rdpclient 2', log '/tmp/rdpclient.out', env '', pid ''.
18-19-59-785| [ pfac] [ 152.950576] Ok, PID 721.
18-19-59-785| [ rdpclient 721] [ 152.976269] RDP Terminal Client, WTware 6.0.56/RPi, pipe 2, pid 721.
18-19-59-785| [ rdpclient 721] [ 152.976932] Use /lib/ui32.so.
18-19-59-785| [ rdpclient 721] [ 152.978075] tsclient-main.cpp ( 757): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
18-19-59-785| [ rdpclient 721] [ 152.983146] Make RDP session with 192.168.1.1, port 3389.
18-19-59-785| [ rdpclient 721] [ 152.983914] No username.
18-19-59-785| [ rdpclient 721] [ 152.984353] No password.
18-19-59-785| [ rdpclient 721] [ 152.984698] No PIN.
18-19-59-785| [ rdpclient 721] [ 152.985026] No domain.
18-19-59-785| [ rdpclient 721] [ 152.985321] No shell.
18-19-59-785| [ rdpclient 721] [ 152.985607] No directory.
18-19-59-785| [ rdpclient 721] [ 152.985894] Window: 1856x1080@24.
18-19-59-785| [ rdpclient 721] [ 152.986189] PFlags 0x0000002F.
18-19-59-785| [ rdpclient 721] [ 152.986477] Keyboard 00000409:00000000.
18-19-59-785| [ rdpclient 721] [ 152.986762] My hostname "ERROR".
18-19-59-785| [ rdpclient 721] [ 152.987047] TCP: connecting to 192.168.1.1:3389.
18-19-59-785| [ rdpclient 721] [ 152.987864] Connection failed with errno 111.
18-19-59-785| [ rdpclient 721] [ 153.988035] Got errno: 103.
18-19-59-785| [ rdpclient 721] [ 154.988863] Connection failed with errno 111.
18-19-59-785| [ rdpclient 721] [ 155.989323] Got errno: 103.
18-19-59-785| [ gm] [ 155.990374] Session is over. Final message: Server 192.168.1.1, port 3389: connection rejected.
18-19-59-785| Make sure that terminal service works on this server.
18-19-59-785| Try to connect using mstsc.exe.
18-19-59-785| [ rdpclient 721] [ 155.990535] rdpclient-tcp.cpp ( 260): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
18-19-59-785| [ rdpclient 721] [ 155.990723] Server 192.168.1.1, port 3389: connection rejected.
18-19-59-785| Make sure that terminal service works on this server.
18-19-59-785| Try to connect using mstsc.exe.
18-19-59-785| [ pfac] [ 155.991992] Process pid 721 terminated, status 00000009.
18-19-59-785| [ gm] [ 167.100569] Run '/sbin/resolver 0x1acebf0 dns [192.168.1.107]', log '', env '', pid ''.
18-19-59-785| [ pfac] [ 167.101313] Run /sbin/resolver 0x1acebf0 dns [192.168.1.107].
18-19-59-785| [ pfac] [ 167.101699] Ok, PID 722.
18-19-59-785| [ pfac] [ 167.113081] Process pid 722 terminated, status 00000000.
18-19-59-785| [ gm] [ 167.117610] 192.168.1.107 => 192.168.1.107.
18-19-59-785| [ gm] [ 167.129904] Free ram before fork terminal client /sbin/rdpclient (session 3): 894648 Kb.
18-19-59-785| [ pfac] [ 167.130969] Run /sbin/rdpclient 3.
18-19-59-785| [ gm] [ 167.131096] Run '/sbin/rdpclient 3', log '/tmp/rdpclient.out', env '', pid ''.
18-19-59-785| [ pfac] [ 167.131248] Ok, PID 723.
18-19-59-785| [ rdpclient 723] [ 167.156879] RDP Terminal Client, WTware 6.0.56/RPi, pipe 3, pid 723.
18-19-59-785| [ rdpclient 723] [ 167.157321] Use /lib/ui32.so.
18-19-59-785| [ rdpclient 723] [ 167.158405] tsclient-main.cpp ( 757): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
18-19-59-785| [ rdpclient 723] [ 167.159138] Make RDP session with 192.168.1.107, port 3389.
18-19-59-785| [ rdpclient 723] [ 167.159587] No username.
18-19-59-785| [ rdpclient 723] [ 167.159933] No password.
18-19-59-785| [ rdpclient 723] [ 167.160424] No PIN.
18-19-59-785| [ rdpclient 723] [ 167.160787] No domain.
18-19-59-785| [ rdpclient 723] [ 167.161106] No shell.
18-19-59-785| [ rdpclient 723] [ 167.161409] No directory.
18-19-59-785| [ rdpclient 723] [ 167.161690] Window: 1856x1080@24.
18-19-59-785| [ rdpclient 723] [ 167.161973] PFlags 0x0000002F.
18-19-59-785| [ rdpclient 723] [ 167.162239] Keyboard 00000409:00000000.
18-19-59-785| [ rdpclient 723] [ 167.162496] My hostname "ERROR".
18-19-59-785| [ rdpclient 723] [ 167.162714] TCP: connecting to 192.168.1.107:3389.
18-19-59-785| [ rdpclient 723] [ 170.310662] Connection failed with errno 113.
18-19-59-785| [ rdpclient 723] [ 171.310787] Got errno: 103.
18-19-59-785| [ rdpclient 723] [ 171.310971] rdpclient-tcp.cpp ( 260): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
18-19-59-785| [ rdpclient 723] [ 171.311128] Server 192.168.1.107, port 3389: connection rejected.
18-19-59-785| Make sure that terminal service works on this server.
18-19-59-785| Try to connect using mstsc.exe.
18-19-59-785| [ gm] [ 171.311796] Session is over. Final message: Server 192.168.1.107, port 3389: connection rejected.
18-19-59-785| Make sure that terminal service works on this server.
18-19-59-785| Try to connect using mstsc.exe.
18-19-59-785| [ pfac] [ 171.313331] Process pid 723 terminated, status 00000009.
18-19-59-785| [ gm] [ 209.870475] Run '/sbin/resolver 0x1acebf0 dns [pol]', log '', env '', pid ''.
18-19-59-785| [ pfac] [ 209.871204] Run /sbin/resolver 0x1acebf0 dns [pol].
18-19-59-785| [ pfac] [ 209.871679] Ok, PID 724.
18-19-59-785| [ resolver ebf0] [ 209.905611] Lookup for "pol" failed, errors 0 -2.
18-19-59-785| [ gm] [ 209.905930] Failed to resolve pol.
18-19-59-785| [ gm] [ 209.906181] Message: 'Failed to convert pol to IP address.
18-19-59-785| Possibly, DNS-server doesn't work or is not specified.', timer 0.
18-19-59-785| [ pfac] [ 209.906679] Process pid 724 terminated, status 00000000.
18-19-59-785| [ gm] [ 229.275474] Run '/sbin/resolver 0x1acebf0 dns [192.168.1.108]', log '', env '', pid ''.
18-19-59-785| [ pfac] [ 229.276017] Run /sbin/resolver 0x1acebf0 dns [192.168.1.108].
18-19-59-785| [ pfac] [ 229.276777] Ok, PID 725.
18-19-59-785| [ pfac] [ 229.291469] Process pid 725 terminated, status 00000000.
18-19-59-785| [ gm] [ 229.293966] 192.168.1.108 => 192.168.1.108.
18-19-59-785| [ gm] [ 229.306291] Free ram before fork terminal client /sbin/rdpclient (session 4): 894664 Kb.
18-19-59-785| [ pfac] [ 229.306616] Run /sbin/rdpclient 4.
18-19-59-785| [ gm] [ 229.306735] Run '/sbin/rdpclient 4', log '/tmp/rdpclient.out', env '', pid ''.
18-19-59-785| [ pfac] [ 229.306989] Ok, PID 726.
18-19-59-785| [ rdpclient 726] [ 229.332626] RDP Terminal Client, WTware 6.0.56/RPi, pipe 4, pid 726.
18-19-59-785| [ rdpclient 726] [ 229.333260] Use /lib/ui32.so.
18-19-59-785| [ rdpclient 726] [ 229.334438] tsclient-main.cpp ( 757): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
18-19-59-785| [ rdpclient 726] [ 229.341326] Make RDP session with 192.168.1.108, port 3389.
18-19-59-785| [ rdpclient 726] [ 229.342113] No username.
18-19-59-785| [ rdpclient 726] [ 229.342700] No password.
18-19-59-785| [ rdpclient 726] [ 229.343276] No PIN.
18-19-59-785| [ rdpclient 726] [ 229.345444] No domain.
18-19-59-785| [ rdpclient 726] [ 229.346028] No shell.
18-19-59-785| [ rdpclient 726] [ 229.346352] No directory.
18-19-59-785| [ rdpclient 726] [ 229.346595] Window: 1856x1080@24.
18-19-59-785| [ rdpclient 726] [ 229.347142] PFlags 0x0000002F.
18-19-59-785| [ rdpclient 726] [ 229.347494] Keyboard 00000409:00000000.
18-19-59-785| [ rdpclient 726] [ 229.347921] My hostname "ERROR".
18-19-59-785| [ rdpclient 726] [ 229.348352] TCP: connecting to 192.168.1.108:3389.
18-19-59-785| [ rdpclient 726] [ 232.470643] Connection failed with errno 113.
18-19-59-785| [ rdpclient 726] [ 233.471047] Got errno: 103.
18-19-59-785| [ rdpclient 726] [ 233.471246] rdpclient-tcp.cpp ( 260): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
18-19-59-785| [ rdpclient 726] [ 233.471388] Server 192.168.1.108, port 3389: connection rejected.
18-19-59-785| Make sure that terminal service works on this server.
18-19-59-785| Try to connect using mstsc.exe.
18-19-59-785| [ gm] [ 233.473568] Session is over. Final message: Server 192.168.1.108, port 3389: connection rejected.
18-19-59-785| Make sure that terminal service works on this server.
18-19-59-785| Try to connect using mstsc.exe.
18-19-59-785| [ pfac] [ 233.474008] Process pid 726 terminated, status 00000009.
18-19-59-785| [ gm] [ 247.379465] Run '/sbin/resolver 0x1acebf0 dns [192.168.56.1]', log '', env '', pid ''.
18-19-59-785| [ pfac] [ 247.380409] Run /sbin/resolver 0x1acebf0 dns [192.168.56.1].
18-19-59-785| [ pfac] [ 247.380997] Ok, PID 727.
18-19-59-785| [ pfac] [ 247.392243] Process pid 727 terminated, status 00000000.
18-19-59-785| [ gm] [ 247.397453] 192.168.56.1 => 192.168.56.1.
18-19-59-785| [ gm] [ 247.409741] Free ram before fork terminal client /sbin/rdpclient (session 5): 894640 Kb.
18-19-59-785| [ pfac] [ 247.410165] Run /sbin/rdpclient 5.
18-19-59-785| [ gm] [ 247.410299] Run '/sbin/rdpclient 5', log '/tmp/rdpclient.out', env '', pid ''.
18-19-59-785| [ pfac] [ 247.410508] Ok, PID 728.
18-19-59-785| [ rdpclient 728] [ 247.436083] RDP Terminal Client, WTware 6.0.56/RPi, pipe 5, pid 728.
18-19-59-785| [ rdpclient 728] [ 247.436729] Use /lib/ui32.so.
18-19-59-785| [ rdpclient 728] [ 247.437827] tsclient-main.cpp ( 757): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
18-19-59-785| [ rdpclient 728] [ 247.441339] Make RDP session with 192.168.56.1, port 3389.
18-19-59-785| [ rdpclient 728] [ 247.441932] No username.
18-19-59-785| [ rdpclient 728] [ 247.442524] No password.
18-19-59-785| [ rdpclient 728] [ 247.442855] No PIN.
18-19-59-785| [ rdpclient 728] [ 247.443114] No domain.
18-19-59-785| [ rdpclient 728] [ 247.443346] No shell.
18-19-59-785| [ rdpclient 728] [ 247.443601] No directory.
18-19-59-785| [ rdpclient 728] [ 247.444098] Window: 1856x1080@24.
18-19-59-785| [ rdpclient 728] [ 247.444505] PFlags 0x0000002F.
18-19-59-785| [ rdpclient 728] [ 247.444824] Keyboard 00000409:00000000.
18-19-59-785| [ rdpclient 728] [ 247.445128] My hostname "ERROR".
18-19-59-785| [ rdpclient 728] [ 247.445530] TCP: connecting to 192.168.56.1:3389.
18-19-59-785| [ rdpclient 728] [ 277.472284] select () timed out.
18-19-59-785| [ rdpclient 728] [ 277.472548] rdpclient-tcp.cpp ( 260): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
18-19-59-785| [ rdpclient 728] [ 277.472705] Server 192.168.56.1, port 3389: connection rejected.
18-19-59-785| Make sure that terminal service works on this server.
18-19-59-785| Try to connect using mstsc.exe.
18-19-59-785| [ gm] [ 277.473334] Session is over. Final message: Server 192.168.56.1, port 3389: connection rejected.
18-19-59-785| Make sure that terminal service works on this server.
18-19-59-785| Try to connect using mstsc.exe.
18-19-59-785| [ pfac] [ 277.474645] Process pid 728 terminated, status 00000009.
18-19-59-785| Connection from wtc.exe at 192.168.1.101.
18-25-02-742| [WTRC] [15.09.2021 18:25:02] Conection with 192.168.1.109:789 failed.
18-25-04-076| [WTRC] [15.09.2021 18:25:04] Conection with 192.168.1.109:789 failed.
18-06-44-071| [wtc.exe] Failed to connect to 192.168.1.109:779.
18-13-50-620| [DHCP] Processing DHCPDISCOVER package...
18-13-50-620| [DHCP] Determine IP for DISCOVER...
18-13-50-620| [DHCP] Sending ARP to check if IP 192.168.1.109 is busy...
18-13-50-932| [DHCP] IP 192.168.1.109 for MAC B8:27:EB:9D:34:A7 determined from terminalDHCP parameters.
18-13-50-932| [DHCP] Stored in catalog IP 192.168.1.109 for MAC B8:27:EB:9D:34:A7
18-13-50-948| [DHCP] Send DHCPOFFER IP: 192.168.1.109.
18-13-50-948| [DHCP] Sent 315 bytes to 192.168.1.109:68.
18-19-59-785| WTware 6.0.56/RPi supervisor.
18-19-59-785| [ KERNEL] [ 0.000000] Booting Linux on physical CPU 0xf00
18-19-59-785| [ KERNEL] [ 0.000000] Linux version 5.10.50-v7 (aka@c22) (arm-linux-gnueabihf-gcc (Debian 8.3.0-2) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #7 SMP Tue Jul 20 19:46:08 UTC 2021
18-19-59-785| [ KERNEL] [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
18-19-59-785| [ KERNEL] [ 0.000000] CPU: div instructions available: patching division code
18-19-59-785| [ KERNEL] [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
18-19-59-785| [ KERNEL] [ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B Rev 1.1
18-19-59-785| [ KERNEL] [ 0.000000] Memory policy: Data cache writealloc
18-19-59-785| [ KERNEL] [ 0.000000] Reserved memory: created CMA memory pool at 0x36000000, size 64 MiB
18-19-59-785| [ KERNEL] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
18-19-59-785| [ KERNEL] [ 0.000000] Zone ranges:
18-19-59-785| [ KERNEL] [ 0.000000] DMA [mem 0x0000000000000000-0x0000000039ffffff]
18-19-59-785| [ KERNEL] [ 0.000000] Normal empty
18-19-59-785| [ KERNEL] [ 0.000000] Movable zone start for each node
18-19-59-785| [ KERNEL] [ 0.000000] Early memory node ranges
18-19-59-785| [ KERNEL] [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000039ffffff]
18-19-59-785| [ KERNEL] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000039ffffff]
18-19-59-785| [ KERNEL] [ 0.000000] On node 0 totalpages: 237568
18-19-59-785| [ KERNEL] [ 0.000000] DMA zone: 1856 pages used for memmap
18-19-59-785| [ KERNEL] [ 0.000000] DMA zone: 0 pages reserved
18-19-59-785| [ KERNEL] [ 0.000000] DMA zone: 237568 pages, LIFO batch:63
18-19-59-785| [ KERNEL] [ 0.000000] percpu: Embedded 15 pages/cpu s29580 r8192 d23668 u61440
18-19-59-785| [ KERNEL] [ 0.000000] pcpu-alloc: s29580 r8192 d23668 u61440 alloc=15*4096
18-19-59-785| [ KERNEL] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
18-19-59-785| [ KERNEL] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 235712
18-19-59-785| [ KERNEL] [ 0.000000] Kernel command line: coherent_pool=1M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbdepth=32 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 quiet wtboot=mmc
18-19-59-785| [ KERNEL] [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
18-19-59-785| [ KERNEL] [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
18-19-59-785| [ KERNEL] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
18-19-59-785| [ KERNEL] [ 0.000000] Memory: 865888K/950272K available (5120K kernel code, 572K rwdata, 736K rodata, 3072K init, 355K bss, 18848K reserved, 65536K cma-reserved)
18-19-59-785| [ KERNEL] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
18-19-59-785| [ KERNEL] [ 0.000000] rcu: Hierarchical RCU implementation.
18-19-59-785| [ KERNEL] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
18-19-59-785| [ KERNEL] [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
18-19-59-785| [ KERNEL] [ 0.000000] random: get_random_bytes called from 0x80700bac with crng_init=0
18-19-59-785| [ KERNEL] [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
18-19-59-785| [ KERNEL] [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
18-19-59-785| [ KERNEL] [ 0.000010] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
18-19-59-785| [ KERNEL] [ 0.000027] Switching to timer-based delay loop, resolution 52ns
18-19-59-785| [ KERNEL] [ 0.000247] Console: colour dummy device 80x30
18-19-59-785| [ KERNEL] [ 0.000319] printk: console [tty0] enabled
18-19-59-785| [ KERNEL] [ 0.000373] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
18-19-59-785| [ KERNEL] [ 0.000398] pid_max: default: 32768 minimum: 301
18-19-59-785| [ KERNEL] [ 0.000640] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
18-19-59-785| [ KERNEL] [ 0.000664] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
18-19-59-785| [ KERNEL] [ 0.001535] CPU: Testing write buffer coherency: ok
18-19-59-785| [ KERNEL] [ 0.001933] CPU0: update cpu_capacity 1024
18-19-59-785| [ KERNEL] [ 0.001948] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
18-19-59-785| [ KERNEL] [ 0.002640] Setting up static identity map for 0x100000 - 0x10003c
18-19-59-785| [ KERNEL] [ 0.002780] rcu: Hierarchical SRCU implementation.
18-19-59-785| [ KERNEL] [ 0.003255] smp: Bringing up secondary CPUs ...
18-19-59-785| [ KERNEL] [ 0.004197] CPU1: update cpu_capacity 1024
18-19-59-785| [ KERNEL] [ 0.004210] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
18-19-59-785| [ KERNEL] [ 0.005229] CPU2: update cpu_capacity 1024
18-19-59-785| [ KERNEL] [ 0.005241] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
18-19-59-785| [ KERNEL] [ 1.040598] CPU3: failed to come online
18-19-59-785| [ KERNEL] [ 1.040688] smp: Brought up 1 node, 3 CPUs
18-19-59-785| [ KERNEL] [ 1.040700] SMP: Total of 3 processors activated (115.20 BogoMIPS).
18-19-59-785| [ KERNEL] [ 1.040708] CPU: All CPU(s) started in HYP mode.
18-19-59-785| [ KERNEL] [ 1.040715] CPU: Virtualization extensions available.
18-19-59-785| [ KERNEL] [ 1.041434] devtmpfs: initialized
18-19-59-785| [ KERNEL] [ 1.055607] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
18-19-59-785| [ KERNEL] [ 1.056175] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
18-19-59-785| [ KERNEL] [ 1.056210] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
18-19-59-785| [ KERNEL] [ 1.059280] pinctrl core: initialized pinctrl subsystem
18-19-59-785| [ KERNEL] [ 1.061352] NET: Registered protocol family 16
18-19-59-785| [ KERNEL] [ 1.064213] DMA: preallocated 1024 KiB pool for atomic coherent allocations
18-19-59-785| [ KERNEL] [ 1.071978] thermal_sys: Registered thermal governor 'step_wise'
18-19-59-785| [ KERNEL] [ 1.073015] Serial: AMBA PL011 UART driver
18-19-59-785| [ KERNEL] [ 1.088392] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
18-19-59-785| [ KERNEL] [ 1.100897] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-04-21T15:49:36, variant start
18-19-59-785| [ KERNEL] [ 1.110880] raspberrypi-firmware soc:firmware: Firmware hash is a48d332c35ee1c1c1ab433228e23317f62dcc5fb
18-19-59-785| [ KERNEL] [ 1.174061] cryptd: max_cpu_qlen set to 1000
18-19-59-785| [ KERNEL] [ 1.178381] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1
18-19-59-785| [ KERNEL] [ 1.182216] usbcore: registered new interface driver usbfs
18-19-59-785| [ KERNEL] [ 1.182404] usbcore: registered new interface driver hub
18-19-59-785| [ KERNEL] [ 1.182511] usbcore: registered new device driver usb
18-19-59-785| [ KERNEL] [ 1.185399] clocksource: Switched to clocksource arch_sys_counter
18-19-59-785| [ KERNEL] [ 1.205261] NET: Registered protocol family 2
18-19-59-785| [ KERNEL] [ 1.205736] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
18-19-59-785| [ KERNEL] [ 1.207408] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
18-19-59-785| [ KERNEL] [ 1.207450] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
18-19-59-785| [ KERNEL] [ 1.207566] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
18-19-59-785| [ KERNEL] [ 1.207755] TCP: Hash tables configured (established 8192 bind 8192)
18-19-59-785| [ KERNEL] [ 1.207941] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
18-19-59-785| [ KERNEL] [ 1.208004] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
18-19-59-785| [ KERNEL] [ 1.208283] NET: Registered protocol family 1
18-19-59-785| [ KERNEL] [ 2.457354] Initialise system trusted keyrings
18-19-59-785| [ KERNEL] [ 2.457524] workingset: timestamp_bits=30 max_order=18 bucket_order=0
18-19-59-785| [ KERNEL] [ 2.631921] Key type asymmetric registered
18-19-59-785| [ KERNEL] [ 2.631945] Asymmetric key parser 'x509' registered
18-19-59-785| [ KERNEL] [ 2.632084] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
18-19-59-785| [ KERNEL] [ 2.634390] bcm2708_fb soc:fb: FB found 1 display(s)
18-19-59-785| [ KERNEL] [ 2.683854] Console: switching to colour frame buffer device 240x67
18-19-59-785| [ KERNEL] [ 2.723024] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1920x1080
18-19-59-785| [ KERNEL] [ 2.730392] bcm2835-rng 3f104000.rng: hwrng registered
18-19-59-785| [ KERNEL] [ 2.731168] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
18-19-59-785| [ KERNEL] [ 2.739931] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
18-19-59-785| [ KERNEL] [ 2.745563] zram: Added device: zram0
18-19-59-785| [ KERNEL] [ 2.748732] libphy: Fixed MDIO Bus: probed
18-19-59-785| [ KERNEL] [ 2.748839] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
18-19-59-785| [ KERNEL] [ 3.477288] Core Release: 2.80a
18-19-59-785| [ KERNEL] [ 3.477309] Setting default values for core params
18-19-59-785| [ KERNEL] [ 3.477353] Finished setting default values for core params
18-19-59-785| [ KERNEL] [ 3.677717] Using Buffer DMA mode
18-19-59-785| [ KERNEL] [ 3.677729] Periodic Transfer Interrupt Enhancement - disabled
18-19-59-785| [ KERNEL] [ 3.677737] Multiprocessor Interrupt Enhancement - disabled
18-19-59-785| [ KERNEL] [ 3.677752] OTG VER PARAM: 0, OTG VER FLAG: 0
18-19-59-785| [ KERNEL] [ 3.677807] Dedicated Tx FIFOs mode
18-19-59-785| [ KERNEL] [ 3.678747]
18-19-59-785| [ KERNEL] [ 3.678777] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = b6114000 dma = 0xf6114000 len=9024
18-19-59-785| [ KERNEL] [ 3.678817] FIQ FSM acceleration enabled for :
18-19-59-785| [ KERNEL] [ 3.678817] Non-periodic Split Transactions
18-19-59-785| [ KERNEL] [ 3.678817] Periodic Split Transactions
18-19-59-785| [ KERNEL] [ 3.678817] High-Speed Isochronous Endpoints
18-19-59-785| [ KERNEL] [ 3.678817] Interrupt/Control Split Transaction hack enabled
18-19-59-785| [ KERNEL] [ 3.678829] dwc_otg: Microframe scheduler enabled
18-19-59-785| [ KERNEL] [ 3.678883]
18-19-59-785| [ KERNEL] [ 3.678895] WARN::hcd_init_fiq:457: FIQ on core 1
18-19-59-785| [ KERNEL] [ 3.678902]
18-19-59-785| [ KERNEL] [ 3.678913] WARN::hcd_init_fiq:458: FIQ ASM at 80426308 length 36
18-19-59-785| [ KERNEL] [ 3.678922]
18-19-59-785| [ KERNEL] [ 3.678932] WARN::hcd_init_fiq:497: MPHI regs_base at ba810000
18-19-59-785| [ KERNEL] [ 3.678962] dwc_otg 3f980000.usb: DWC OTG Controller
18-19-59-785| [ KERNEL] [ 3.679006] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
18-19-59-785| [ KERNEL] [ 3.679066] dwc_otg 3f980000.usb: irq 89, io mem 0x00000000
18-19-59-785| [ KERNEL] [ 3.679122] Init: Port Power? op_state=1
18-19-59-785| [ KERNEL] [ 3.679130] Init: Power Port (0)
18-19-59-785| [ KERNEL] [ 3.679396] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
18-19-59-785| [ KERNEL] [ 3.679411] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
18-19-59-785| [ KERNEL] [ 3.679424] usb usb1: Product: DWC OTG Controller
18-19-59-785| [ KERNEL] [ 3.679436] usb usb1: Manufacturer: Linux 5.10.50-v7 dwc_otg_hcd
18-19-59-785| [ KERNEL] [ 3.679446] usb usb1: SerialNumber: 3f980000.usb
18-19-59-785| [ KERNEL] [ 3.680450] hub 1-0:1.0: USB hub found
18-19-59-785| [ KERNEL] [ 3.680539] hub 1-0:1.0: 1 port detected
18-19-59-785| [ KERNEL] [ 3.682170] dwc_otg: FIQ enabled
18-19-59-785| [ KERNEL] [ 3.682188] dwc_otg: NAK holdoff enabled
18-19-59-785| [ KERNEL] [ 3.682196] dwc_otg: FIQ split-transaction FSM enabled
18-19-59-785| [ KERNEL] [ 3.682304] Module dwc_common_port init
18-19-59-785| [ KERNEL] [ 3.690936] usbcore: registered new interface driver usbtouchscreen
18-19-59-785| [ KERNEL] [ 3.693579] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
18-19-59-785| [ KERNEL] [ 3.694698] sdhci: Secure Digital Host Controller Interface driver
18-19-59-785| [ KERNEL] [ 3.694714] sdhci: Copyright(c) Pierre Ossman
18-19-59-785| [ KERNEL] [ 3.695881] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
18-19-59-785| [ KERNEL] [ 3.696146] sdhci-pltfm: SDHCI platform and OF driver helper
18-19-59-785| [ KERNEL] [ 3.696706] hid: raw HID events driver (C) Jiri Kosina
18-19-59-785| [ KERNEL] [ 3.699619] usbcore: registered new interface driver usbhid
18-19-59-785| [ KERNEL] [ 3.699644] usbhid: USB HID core driver
18-19-59-785| [ KERNEL] [ 3.746978] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
18-19-59-785| [ KERNEL] [ 3.747010] [vc_sm_connected_init]: start
18-19-59-785| [ KERNEL] [ 3.756148] [vc_sm_connected_init]: installed successfully
18-19-59-785| [ KERNEL] [ 3.756773] NET: Registered protocol family 17
18-19-59-785| [ KERNEL] [ 3.757309] Registering SWP/SWPB emulation handler
18-19-59-785| [ KERNEL] [ 3.761415] Loading compiled-in X.509 certificates
18-19-59-785| [ KERNEL] [ 3.764184] uart-pl011 3f201000.serial: cts_event_workaround enabled
18-19-59-785| [ KERNEL] [ 3.764332] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 114, base_baud = 0) is a PL011 rev2
18-19-59-785| [ KERNEL] [ 3.768000] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
18-19-59-785| [ KERNEL] [ 3.782160] sdhost: log_buf @ (ptrval) (f6113000)
18-19-59-785| [ KERNEL] [ 3.805727] Indeed it is in host mode hprt0 = 00021501
18-19-59-785| [ KERNEL] [ 3.879257] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
18-19-59-785| [ KERNEL] [ 3.885841] of_cfs_init
18-19-59-785| [ KERNEL] [ 3.886080] of_cfs_init: OK
18-19-59-785| [ KERNEL] [ 3.891682] random: fast init done
18-19-59-785| [ KERNEL] [ 3.905694] Freeing unused kernel memory: 3072K
18-19-59-785| [ KERNEL] [ 3.955858] Run /init as init process
18-19-59-785| [ KERNEL] [ 3.955873] with arguments:
18-19-59-785| [ KERNEL] [ 3.955880] /init
18-19-59-785| [ KERNEL] [ 3.955887] with environment:
18-19-59-785| [ KERNEL] [ 3.955896] HOME=/
18-19-59-785| [ KERNEL] [ 3.955902] TERM=linux
18-19-59-785| [ KERNEL] [ 3.955912] wtboot=mmc
18-19-59-785| [ KERNEL] [ 3.969185] mmc0: host does not support reading read-only switch, assuming write-enable
18-19-59-785| [ KERNEL] [ 3.972946] mmc0: new high speed SDHC card at address aaaa
18-19-59-785| [ KERNEL] [ 3.974099] mmcblk0: mmc0:aaaa SC32G 29.7 GiB
18-19-59-785| [ KERNEL] [ 3.976967] mmcblk0: p1
18-19-59-785| [ KERNEL] [ 4.015525] usb 1-1: new high-speed USB device number 2 using dwc_otg
18-19-59-785| [ KERNEL] [ 4.015760] Indeed it is in host mode hprt0 = 00001101
18-19-59-785| [ KERNEL] [ 4.255800] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
18-19-59-785| [ KERNEL] [ 4.255828] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
18-19-59-785| [ KERNEL] [ 4.256844] hub 1-1:1.0: USB hub found
18-19-59-785| [ KERNEL] [ 4.257031] hub 1-1:1.0: 5 ports detected
18-19-59-785| [ pfac] [ 4.313379] Run /sbin/initrd.
18-19-59-785| [ pfac] [ 4.313839] Ok, PID 662.
18-19-59-785| [ initrd] [ 4.319749] WTware 6.0.56/RPi shell.
18-19-59-785| [ initrd] [ 4.320592] Load font 'ter-c32b.psf', console 120x33.
18-19-59-785| [ initrd] [ 4.370526] HDD/MMC/SD boot.
18-19-59-785| [ initrd] [ 4.370773] No device '/dev/fb1'.
18-19-59-785| [ initrd] [ 4.443032] Success: /dev/mmcblk0p1 mounted to /bootmedia.
18-19-59-785| /--- FILE "/bootmedia/config.txt" -----------------------
18-19-59-785| | # For more options and information see:
18-19-59-785| | #
18-19-59-785| | # https://www.raspberrypi.org/documentation/configuration/config-txt/README.md
18-19-59-785| | #
18-19-59-785| | disable_overscan=1
18-19-59-785| | # Uncomment if hdmi display is not detected and composite is being output.
18-19-59-785| | #hdmi_force_hotplug=1
18-19-59-785| | # Force the monitor to HDMI mode so that sound will be sent over HDMI cable.
18-19-59-785| | #hdmi_drive=2
18-19-59-785| | # Uncomment to increase signal to HDMI, if you have interference, blanking, or
18-19-59-785| | # no display.
18-19-59-785| | #config_hdmi_boost=4
18-19-59-785| | # Uncomment to overclock the arm. 700 MHz is the default.
18-19-59-785| | #arm_freq=800
18-19-59-785| | gpu_mem=96
18-19-59-785| | disable_splash=1
18-19-59-785| | framebuffer_depth=32
18-19-59-785| | # Uncomment for 16-bit color.
18-19-59-785| | #framebuffer_depth=16
18-19-59-785| | # Enable onboard audio (HDMI or jack).
18-19-59-785| | dtparam=audio=on
18-19-59-785| | # Removes the warning overlay.
18-19-59-785| | #avoid_warnings=1
18-19-59-785| | # Additionally allows turbo when low-voltage is present.
18-19-59-785| | #avoid_warnings=2
18-19-59-785| | [pi4]
18-19-59-785| | max_framebuffers=2
18-19-59-785| | [all]
18-19-59-785| | # Uncomment these two lines to set display resolution:
18-19-59-785| | #hdmi_group=2
18-19-59-785| | #hdmi_mode=58
18-19-59-785| | #
18-19-59-785| | # Specify correct value in hdmi_mode= line from the list of valid values:
18-19-59-785| | # 800x600: hdmi_mode=9
18-19-59-785| | # 1024x768: hdmi_mode=16
18-19-59-785| | # 1280x1024: hdmi_mode=35
18-19-59-785| | # 1360x768: hdmi_mode=39
18-19-59-785| | # 1400x1050: hdmi_mode=42
18-19-59-785| | # 1440x900: hdmi_mode=47
18-19-59-785| | # 1600x1200: hdmi_mode=51
18-19-59-785| | # 1680x1050: hdmi_mode=58
18-19-59-785| | # 1366x768: hdmi_mode=81
18-19-59-785| | # 1920x1080: hdmi_mode=82
18-19-59-785| | # 1920x1200: hdmi_mode=69
18-19-59-785| | #
18-19-59-785| | # Find more resolutions in manual:
18-19-59-785| | # https://www.raspberrypi.org/documentation/configuration/config-txt/video.md
18-19-59-785| | #
18-19-59-785| | # Uncomment six lines with such syntax and right hdmi_mode= values for
18-19-59-785| | # dual displays on Raspberry Pi 4:
18-19-59-785| | #
18-19-59-785| | #[HDMI:0]
18-19-59-785| | # hdmi_group=2
18-19-59-785| | # hdmi_mode=42
18-19-59-785| | #[HDMI:1]
18-19-59-785| | # hdmi_group=2
18-19-59-785| | # hdmi_mode=58
18-19-59-785| \----------------------------------------------------
18-19-59-785| [ KERNEL] [ 4.575438] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
18-19-59-785| [ KERNEL] [ 4.705786] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
18-19-59-785| [ KERNEL] [ 4.705808] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
18-19-59-785| [ KERNEL] [ 4.805436] usb 1-1.5: new low-speed USB device number 4 using dwc_otg
18-19-59-785| [ KERNEL] [ 4.946755] usb 1-1.5: New USB device found, idVendor=1bcf, idProduct=05cf, bcdDevice= 6.0b
18-19-59-785| [ KERNEL] [ 4.946775] usb 1-1.5: New USB device strings: Mfr=0, Product=2, SerialNumber=0
18-19-59-785| [ KERNEL] [ 4.946787] usb 1-1.5: Product: Si lverCrest STMS 2219 A1
18-19-59-785| [ KERNEL] [ 4.962824] input: Si lverCrest STMS 2219 A1 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:1BCF:05CF.0001/input/input0
18-19-59-785| [ KERNEL] [ 5.027152] hid-generic 0003:1BCF:05CF.0001: input,hidraw0: USB HID v1.00 Keyboard [Si lverCrest STMS 2219 A1] on usb-3f980000.usb-1.5/input0
18-19-59-785| [ KERNEL] [ 5.045801] input: Si lverCrest STMS 2219 A1 Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.1/0003:1BCF:05CF.0002/input/input1
18-19-59-785| [ KERNEL] [ 5.046404] input: Si lverCrest STMS 2219 A1 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.1/0003:1BCF:05CF.0002/input/input2
18-19-59-785| [ KERNEL] [ 5.047009] input: Si lverCrest STMS 2219 A1 Consumer Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.1/0003:1BCF:05CF.0002/input/input3
18-19-59-785| [ KERNEL] [ 5.126136] input: Si lverCrest STMS 2219 A1 System Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.1/0003:1BCF:05CF.0002/input/input4
18-19-59-785| [ KERNEL] [ 5.127269] hid-generic 0003:1BCF:05CF.0002: input,hiddev96,hidraw1: USB HID v1.00 Mouse [Si lverCrest STMS 2219 A1] on usb-3f980000.usb-1.5/input1
18-19-59-785| /--- FILE "/bootmedia/configs/initrd.wtc" -----------------------
18-19-59-785| | clientIP = *
18-19-59-785| | config = network
18-19-59-785| \----------------------------------------------------
18-19-59-785| [ initrd] [ 5.286353] Do not cache package files.
18-19-59-785| [ initrd] [ 5.286527] WTpassword empty.
18-19-59-785| [ initrd] [ 5.286646] Unpack /bootmedia/packages/pi2-lib.
18-19-59-785| [ initrd] [ 7.674159] USB: 1bcf:05cf Sunplus Innovation Technology Inc. Micro keyboard & mouse receiver.
18-19-59-785| [ initrd] [ 7.674515] USB: 0424:ec00 Microchip Technology, Inc. (formerly SMSC) SMSC9512/9514 Fast Ethernet Adapter.
18-19-59-785| [ initrd] [ 7.674718] USB: 0424:9514 Microchip Technology, Inc. (formerly SMSC) SMC9514 Hub.
18-19-59-785| [ initrd] [ 7.718146] Load Ethernet drivers.
18-19-59-785| [ initrd] [ 7.718456] modprobe lan78xx.
18-19-59-785| [ initrd] [ 7.732464] modprobe smsc95xx.
18-19-59-785| [ KERNEL] [ 7.736135] usbcore: registered new interface driver lan78xx
18-19-59-785| [ KERNEL] [ 7.752382] smsc95xx v2.0.0
18-19-59-785| [ KERNEL] [ 7.835245] libphy: smsc95xx-mdiobus: probed
18-19-59-785| [ KERNEL] [ 7.837252] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:9d:34:a7
18-19-59-785| [ KERNEL] [ 7.837586] usbcore: registered new interface driver smsc95xx
18-19-59-785| [ initrd] [ 7.895328] WTpassword empty.
18-19-59-785| [ KERNEL] [ 7.899141] Generic PHY usb-001:003:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=usb-001:003:01, irq=POLL)
18-19-59-785| [ KERNEL] [ 7.899733] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
18-19-59-785| [ KERNEL] [ 7.905352] smsc95xx 1-1.1:1.0 eth0: Link is Down
18-19-59-785| [ KERNEL] [ 9.996667] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off
18-19-59-785| [ initrd] [ 10.212941] dhcp: 576 bytes from 192.168.1.1.
18-19-59-785| [ initrd] [ 10.213110] 00000000:0000022C0000000000110000C0A80101C0A8016D00430044022C000002010600 ...,..............m.C.D.,......
18-19-59-785| [ initrd] [ 10.213261] 00000020:67458B6B0000000000000000C0A8016D0000000000000000B827EB9D34A70000 gE.k...........m.........'..4...
18-19-59-785| [ initrd] [ 10.213375] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
18-19-59-785| [ initrd] [ 10.213481] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
18-19-59-785| [ initrd] [ 10.213585] 00000080:0000000000000000000000000000000000000000000000000000000000000000 ................................
18-19-59-785| [ initrd] [ 10.213689] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................
18-19-59-785| [ initrd] [ 10.213792] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................
18-19-59-785| [ initrd] [ 10.213895] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................
18-19-59-785| [ initrd] [ 10.213998] 00000100:0000000000000000638253633501023604C0A801013304000138A70104FFFFFF ........c.Sc5..6.....3...8......
18-19-59-785| [ initrd] [ 10.214101] 00000120:000304C0A801010604C0A80101FF000000000000000000000000000000000000 ................................
18-19-59-785| [ initrd] [ 10.449032] dhcp: 343 bytes from 192.168.1.101.
18-19-59-785| [ initrd] [ 10.449174] 00000000:000001430000000000110000C0A80165C0A8016D004300440143000002010600 ...C..........e...m.C.D.C......
18-19-59-785| [ initrd] [ 10.449284] 00000020:67458B6B0000000000000000C0A8016DC0A8016500000000B827EB9D34A70000 gE.k...........m...e.....'..4...
18-19-59-785| [ initrd] [ 10.449395] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
18-19-59-785| [ initrd] [ 10.449502] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
18-19-59-785| [ initrd] [ 10.449609] 00000080:0000000000000000362E302E35365C6B65726E656C372E696D67000000000000 ........6.0.56\kernel7.img......
18-19-59-785| [ initrd] [ 10.449712] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................
18-19-59-785| [ initrd] [ 10.449815] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................
18-19-59-785| [ initrd] [ 10.449918] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................
18-19-59-785| [ initrd] [ 10.450064] 00000100:0000000000000000638253633501023604C0A801650104FFFFFF000604C0A801 ........c.Sc5..6....e...........
18-19-59-785| [ initrd] [ 10.450183] 00000120:011A0205DC420E3139322E3136382E312E313031004313362E302E35365C6B65 ....B.192.168.1.101.C6.0.56\ke
18-19-59-785| [ initrd] [ 10.450289] Discard second offer for 192.168.1.109.
18-19-59-785| [ initrd] [ 11.982665] dhcp: 576 bytes from 192.168.1.1.
18-19-59-785| [ initrd] [ 11.982832] 00000000:0000022C0000000000110000C0A80101C0A8016D00430044022C000002010600 ...,..............m.C.D.,......
18-19-59-785| [ initrd] [ 11.982952] 00000020:67458B6B0000000000000000C0A8016D0000000000000000B827EB9D34A70000 gE.k...........m.........'..4...
18-19-59-785| [ initrd] [ 11.983064] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
18-19-59-785| [ initrd] [ 11.983168] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
18-19-59-785| [ initrd] [ 11.983272] 00000080:0000000000000000000000000000000000000000000000000000000000000000 ................................
18-19-59-785| [ initrd] [ 11.983377] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................
18-19-59-785| [ initrd] [ 11.983480] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................
18-19-59-785| [ initrd] [ 11.983583] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................
18-19-59-785| [ initrd] [ 11.983689] 00000100:0000000000000000638253633501053604C0A801013304000151800104FFFFFF ........c.Sc5..6.....3...Q......
18-19-59-785| [ initrd] [ 11.983819] 00000120:000304C0A801010604C0A80101FF000000000000000000000000000000000000 ................................
18-19-59-785| [ initrd] [ 12.020152] [DHCP] DHCP server address 192.168.1.1.
18-19-59-785| [ initrd] [ 12.020284] [DHCP] IP 192.168.1.109 mask 255.255.255.0.
18-19-59-785| [ initrd] [ 12.020400] [DHCP] Default gateway 192.168.1.1.
18-19-59-785| [ initrd] [ 12.020515] [DHCP] DNS 192.168.1.1.
18-19-59-785| [ initrd] [ 12.020637] [DHCP] TFTP = DHCP 192.168.1.1.
18-19-59-785| [ initrd] [ 12.020755] [DHCP] TFTP 192.168.1.1.
18-19-59-785| [ initrd] [ 12.020869] [DHCP] No boot file from DHCP.
18-19-59-785| [ initrd] [ 12.020987] [DHCP] TFTP binary "", configs prefix "", using "/" slash.
18-19-59-785| WTC listener is active.
18-19-59-785| WTC broadcast listener is active.
18-19-59-785| Send broadcast WTCU discover.
18-19-59-785| [ pfac] [ 12.024723] Run /sbin/httpd.
18-19-59-785| [ initrd] [ 12.024881] Run '/sbin/httpd', log '/tmp/httpd.out', env '', pid ''.
18-19-59-785| [ pfac] [ 12.025040] Ok, PID 717.
18-19-59-785| [ initrd] [ 12.025117] [TFTP] Download config file Everyone/source.wtc from 192.168.1.1.
18-19-59-785| [ httpd] [ 12.040088] Internal HTTP Server, WTware 6.0.56/RPi
18-19-59-785| [ initrd] [ 12.530230] [TFTP] Got EAGAIN, resend wtware hello.
18-19-59-785| [ initrd] [ 13.040181] [TFTP] Got EAGAIN, resend wtware hello.
18-19-59-785| [ initrd] [ 13.550151] [TFTP] Got EAGAIN, resend wtware hello.
18-19-59-785| [ KERNEL] [ 14.055481] random: crng init done
18-19-59-785| [ initrd] [ 14.070293] [TFTP] Got EAGAIN, resend wtware hello.
18-19-59-785| [ initrd] [ 14.580165] [TFTP] Got EAGAIN, resend wtware hello.
18-19-59-785| [ initrd] [ 15.090140] [TFTP] Got EAGAIN, resend wtware hello.
18-19-59-785| [ initrd] [ 15.600141] [TFTP] Got EAGAIN, resend wtware hello.
18-19-59-785| [ initrd] [ 16.110135] [TFTP] Got EAGAIN, resend wtware hello.
18-19-59-785| [ initrd] [ 16.620138] [TFTP] Got EAGAIN, resend wtware hello.
18-19-59-785| [ initrd] [ 17.130126] [TFTP] Got EAGAIN, resend wtware hello.
18-19-59-785| [ initrd] [ 17.640143] [TFTP] recv() return -1, errno 11.
18-19-59-785| [ initrd] [ 30.350184] tftp.cpp ( 942): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
18-19-59-785| [ initrd] [ 30.350440] [TFTP] Download config file Everyone/list.wtc from 192.168.1.1.
18-19-59-785| [ initrd] [ 43.060166] tftp.cpp ( 942): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
18-19-59-785| [ initrd] [ 43.060403] [TFTP] Download config file Terminals/B8.27.EB.9D.34.A7/config.wtc from 192.168.1.1.
18-19-59-785| [ initrd] [ 55.770167] tftp.cpp ( 942): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
18-19-59-785| [ initrd] [ 55.770354] [TFTP] Download config file Terminals/B8.27.EB.9D.34.A7.wtc from 192.168.1.1.
18-19-59-785| [ initrd] [ 68.480150] tftp.cpp ( 942): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
18-19-59-785| [ initrd] [ 68.480319] [TFTP] Download config file Everyone/default.wtc from 192.168.1.1.
18-19-59-785| [ initrd] [ 81.190157] tftp.cpp ( 942): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
18-19-59-785| [ initrd] [ 81.190320] [TFTP] Download config file Everyone/all.wtc from 192.168.1.1.
18-19-59-785| [ initrd] [ 93.900158] tftp.cpp ( 942): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
18-19-59-785| [ initrd] [ 93.901202] Local config not found. Fatal error.
18-19-59-785| [ initrd] [ 98.210466] globalConfig.cpp ( 1157): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
18-19-59-785| [ initrd] [ 98.210652] [NTP] 42 DHCP option is not set.
18-19-59-785| Everyone can control terminal by RSH.
18-19-59-785| RSH: listener is active.
18-19-59-785| Send broadcast WTCU discover.
18-19-59-785| [ initrd] [ 98.217697] Start video wizard.
18-19-59-785| [ initrd] [ 98.217890] globalConfig.cpp ( 1157): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
18-19-59-785| [ httpd] [ 98.217986] Reread settings.
18-19-59-785| [ initrd] [ 98.218120] Unpack /bootmedia/packages/pi2-f.
18-19-59-785| [ httpd] [ 98.218199] Everyone can control terminal by HTTP.
18-19-59-785| [ gm] [ 98.759694] WTware 6.0.56/RPi session manager.
18-19-59-785| [ gm] [ 98.760686] Create empty config file.
18-19-59-785| [ gm] [ 98.761333] Keys found. Add event4: Si lverCrest STMS 2219 A1 System Control.
18-19-59-785| [ gm] [ 98.761490] EV_REL flag found. Add event3: Si lverCrest STMS 2219 A1 Consumer Control.
18-19-59-785| [ gm] [ 98.761631] EV_ABS flag found. Add event2: Si lverCrest STMS 2219 A1.
18-19-59-785| [ gm] [ 98.761762] EV_REL flag found. Add event1: Si lverCrest STMS 2219 A1 Mouse.
18-19-59-785| [ gm] [ 98.761908] Keys found. Add event0: Si lverCrest STMS 2219 A1.
18-19-59-785| [ gm] [ 98.762056] Display mode: 1920x1080, 32 bit, landscape, 0 Hz, modeline "", DDC enabled, connector 0.
18-19-59-785| [ gm] [ 100.339937] Framebuffer device found.
18-19-59-785| [ gm] [ 100.340235] LINELENBYTES 7680
18-19-59-785| [ gm] [ 100.340376] VLEN 8294400
18-19-59-785| [ gm] [ 100.345548] Use /lib/ui32.so.
18-19-59-785| [ gm] [ 100.346430] Wizard mode, choose server.
18-19-59-785| [ gm] [ 110.844765] Run '/sbin/resolver 0x1acebf0 dns [192.168.1.101]', log '', env '', pid ''.
18-19-59-785| [ pfac] [ 110.845491] Run /sbin/resolver 0x1acebf0 dns [192.168.1.101].
18-19-59-785| [ pfac] [ 110.845858] Ok, PID 718.
18-19-59-785| [ pfac] [ 110.857775] Process pid 718 terminated, status 00000000.
18-19-59-785| [ gm] [ 110.861905] 192.168.1.101 => 192.168.1.101.
18-19-59-785| [ gm] [ 110.874778] Free ram before fork terminal client /sbin/rdpclient (session 1): 895404 Kb.
18-19-59-785| [ pfac] [ 110.875752] Run /sbin/rdpclient 1.
18-19-59-785| [ gm] [ 110.875884] Run '/sbin/rdpclient 1', log '/tmp/rdpclient.out', env '', pid ''.
18-19-59-785| [ pfac] [ 110.876047] Ok, PID 719.
18-19-59-785| [ rdpclient 719] [ 110.901793] RDP Terminal Client, WTware 6.0.56/RPi, pipe 1, pid 719.
18-19-59-785| [ rdpclient 719] [ 110.902310] Use /lib/ui32.so.
18-19-59-785| [ rdpclient 719] [ 110.903428] tsclient-main.cpp ( 757): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
18-19-59-785| [ rdpclient 719] [ 110.904478] Make RDP session with 192.168.1.101, port 3389.
18-19-59-785| [ rdpclient 719] [ 110.904952] No username.
18-19-59-785| [ rdpclient 719] [ 110.905444] No password.
18-19-59-785| [ rdpclient 719] [ 110.905814] No PIN.
18-19-59-785| [ rdpclient 719] [ 110.906152] No domain.
18-19-59-785| [ rdpclient 719] [ 110.906456] No shell.
18-19-59-785| [ rdpclient 719] [ 110.906750] No directory.
18-19-59-785| [ rdpclient 719] [ 110.907059] Window: 1856x1080@24.
18-19-59-785| [ rdpclient 719] [ 110.907311] PFlags 0x0000002F.
18-19-59-785| [ rdpclient 719] [ 110.907574] Keyboard 00000409:00000000.
18-19-59-785| [ rdpclient 719] [ 110.907805] My hostname "ERROR".
18-19-59-785| [ rdpclient 719] [ 110.908054] TCP: connecting to 192.168.1.101:3389.
18-19-59-785| [ rdpclient 719] [ 140.936100] select () timed out.
18-19-59-785| [ rdpclient 719] [ 140.936363] rdpclient-tcp.cpp ( 260): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
18-19-59-785| [ rdpclient 719] [ 140.936526] Server 192.168.1.101, port 3389: connection rejected.
18-19-59-785| Make sure that terminal service works on this server.
18-19-59-785| Try to connect using mstsc.exe.
18-19-59-785| [ gm] [ 140.937142] Session is over. Final message: Server 192.168.1.101, port 3389: connection rejected.
18-19-59-785| Make sure that terminal service works on this server.
18-19-59-785| Try to connect using mstsc.exe.
18-19-59-785| [ pfac] [ 140.939194] Process pid 719 terminated, status 00000009.
18-19-59-785| [ gm] [ 152.920357] Run '/sbin/resolver 0x1acebf0 dns [192.168.1.1]', log '', env '', pid ''.
18-19-59-785| [ pfac] [ 152.921090] Run /sbin/resolver 0x1acebf0 dns [192.168.1.1].
18-19-59-785| [ pfac] [ 152.921572] Ok, PID 720.
18-19-59-785| [ pfac] [ 152.932240] Process pid 720 terminated, status 00000000.
18-19-59-785| [ gm] [ 152.937611] 192.168.1.1 => 192.168.1.1.
18-19-59-785| [ gm] [ 152.949823] Free ram before fork terminal client /sbin/rdpclient (session 2): 894908 Kb.
18-19-59-785| [ pfac] [ 152.950235] Run /sbin/rdpclient 2.
18-19-59-785| [ gm] [ 152.950370] Run '/sbin/rdpclient 2', log '/tmp/rdpclient.out', env '', pid ''.
18-19-59-785| [ pfac] [ 152.950576] Ok, PID 721.
18-19-59-785| [ rdpclient 721] [ 152.976269] RDP Terminal Client, WTware 6.0.56/RPi, pipe 2, pid 721.
18-19-59-785| [ rdpclient 721] [ 152.976932] Use /lib/ui32.so.
18-19-59-785| [ rdpclient 721] [ 152.978075] tsclient-main.cpp ( 757): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
18-19-59-785| [ rdpclient 721] [ 152.983146] Make RDP session with 192.168.1.1, port 3389.
18-19-59-785| [ rdpclient 721] [ 152.983914] No username.
18-19-59-785| [ rdpclient 721] [ 152.984353] No password.
18-19-59-785| [ rdpclient 721] [ 152.984698] No PIN.
18-19-59-785| [ rdpclient 721] [ 152.985026] No domain.
18-19-59-785| [ rdpclient 721] [ 152.985321] No shell.
18-19-59-785| [ rdpclient 721] [ 152.985607] No directory.
18-19-59-785| [ rdpclient 721] [ 152.985894] Window: 1856x1080@24.
18-19-59-785| [ rdpclient 721] [ 152.986189] PFlags 0x0000002F.
18-19-59-785| [ rdpclient 721] [ 152.986477] Keyboard 00000409:00000000.
18-19-59-785| [ rdpclient 721] [ 152.986762] My hostname "ERROR".
18-19-59-785| [ rdpclient 721] [ 152.987047] TCP: connecting to 192.168.1.1:3389.
18-19-59-785| [ rdpclient 721] [ 152.987864] Connection failed with errno 111.
18-19-59-785| [ rdpclient 721] [ 153.988035] Got errno: 103.
18-19-59-785| [ rdpclient 721] [ 154.988863] Connection failed with errno 111.
18-19-59-785| [ rdpclient 721] [ 155.989323] Got errno: 103.
18-19-59-785| [ gm] [ 155.990374] Session is over. Final message: Server 192.168.1.1, port 3389: connection rejected.
18-19-59-785| Make sure that terminal service works on this server.
18-19-59-785| Try to connect using mstsc.exe.
18-19-59-785| [ rdpclient 721] [ 155.990535] rdpclient-tcp.cpp ( 260): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
18-19-59-785| [ rdpclient 721] [ 155.990723] Server 192.168.1.1, port 3389: connection rejected.
18-19-59-785| Make sure that terminal service works on this server.
18-19-59-785| Try to connect using mstsc.exe.
18-19-59-785| [ pfac] [ 155.991992] Process pid 721 terminated, status 00000009.
18-19-59-785| [ gm] [ 167.100569] Run '/sbin/resolver 0x1acebf0 dns [192.168.1.107]', log '', env '', pid ''.
18-19-59-785| [ pfac] [ 167.101313] Run /sbin/resolver 0x1acebf0 dns [192.168.1.107].
18-19-59-785| [ pfac] [ 167.101699] Ok, PID 722.
18-19-59-785| [ pfac] [ 167.113081] Process pid 722 terminated, status 00000000.
18-19-59-785| [ gm] [ 167.117610] 192.168.1.107 => 192.168.1.107.
18-19-59-785| [ gm] [ 167.129904] Free ram before fork terminal client /sbin/rdpclient (session 3): 894648 Kb.
18-19-59-785| [ pfac] [ 167.130969] Run /sbin/rdpclient 3.
18-19-59-785| [ gm] [ 167.131096] Run '/sbin/rdpclient 3', log '/tmp/rdpclient.out', env '', pid ''.
18-19-59-785| [ pfac] [ 167.131248] Ok, PID 723.
18-19-59-785| [ rdpclient 723] [ 167.156879] RDP Terminal Client, WTware 6.0.56/RPi, pipe 3, pid 723.
18-19-59-785| [ rdpclient 723] [ 167.157321] Use /lib/ui32.so.
18-19-59-785| [ rdpclient 723] [ 167.158405] tsclient-main.cpp ( 757): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
18-19-59-785| [ rdpclient 723] [ 167.159138] Make RDP session with 192.168.1.107, port 3389.
18-19-59-785| [ rdpclient 723] [ 167.159587] No username.
18-19-59-785| [ rdpclient 723] [ 167.159933] No password.
18-19-59-785| [ rdpclient 723] [ 167.160424] No PIN.
18-19-59-785| [ rdpclient 723] [ 167.160787] No domain.
18-19-59-785| [ rdpclient 723] [ 167.161106] No shell.
18-19-59-785| [ rdpclient 723] [ 167.161409] No directory.
18-19-59-785| [ rdpclient 723] [ 167.161690] Window: 1856x1080@24.
18-19-59-785| [ rdpclient 723] [ 167.161973] PFlags 0x0000002F.
18-19-59-785| [ rdpclient 723] [ 167.162239] Keyboard 00000409:00000000.
18-19-59-785| [ rdpclient 723] [ 167.162496] My hostname "ERROR".
18-19-59-785| [ rdpclient 723] [ 167.162714] TCP: connecting to 192.168.1.107:3389.
18-19-59-785| [ rdpclient 723] [ 170.310662] Connection failed with errno 113.
18-19-59-785| [ rdpclient 723] [ 171.310787] Got errno: 103.
18-19-59-785| [ rdpclient 723] [ 171.310971] rdpclient-tcp.cpp ( 260): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
18-19-59-785| [ rdpclient 723] [ 171.311128] Server 192.168.1.107, port 3389: connection rejected.
18-19-59-785| Make sure that terminal service works on this server.
18-19-59-785| Try to connect using mstsc.exe.
18-19-59-785| [ gm] [ 171.311796] Session is over. Final message: Server 192.168.1.107, port 3389: connection rejected.
18-19-59-785| Make sure that terminal service works on this server.
18-19-59-785| Try to connect using mstsc.exe.
18-19-59-785| [ pfac] [ 171.313331] Process pid 723 terminated, status 00000009.
18-19-59-785| [ gm] [ 209.870475] Run '/sbin/resolver 0x1acebf0 dns [pol]', log '', env '', pid ''.
18-19-59-785| [ pfac] [ 209.871204] Run /sbin/resolver 0x1acebf0 dns [pol].
18-19-59-785| [ pfac] [ 209.871679] Ok, PID 724.
18-19-59-785| [ resolver ebf0] [ 209.905611] Lookup for "pol" failed, errors 0 -2.
18-19-59-785| [ gm] [ 209.905930] Failed to resolve pol.
18-19-59-785| [ gm] [ 209.906181] Message: 'Failed to convert pol to IP address.
18-19-59-785| Possibly, DNS-server doesn't work or is not specified.', timer 0.
18-19-59-785| [ pfac] [ 209.906679] Process pid 724 terminated, status 00000000.
18-19-59-785| [ gm] [ 229.275474] Run '/sbin/resolver 0x1acebf0 dns [192.168.1.108]', log '', env '', pid ''.
18-19-59-785| [ pfac] [ 229.276017] Run /sbin/resolver 0x1acebf0 dns [192.168.1.108].
18-19-59-785| [ pfac] [ 229.276777] Ok, PID 725.
18-19-59-785| [ pfac] [ 229.291469] Process pid 725 terminated, status 00000000.
18-19-59-785| [ gm] [ 229.293966] 192.168.1.108 => 192.168.1.108.
18-19-59-785| [ gm] [ 229.306291] Free ram before fork terminal client /sbin/rdpclient (session 4): 894664 Kb.
18-19-59-785| [ pfac] [ 229.306616] Run /sbin/rdpclient 4.
18-19-59-785| [ gm] [ 229.306735] Run '/sbin/rdpclient 4', log '/tmp/rdpclient.out', env '', pid ''.
18-19-59-785| [ pfac] [ 229.306989] Ok, PID 726.
18-19-59-785| [ rdpclient 726] [ 229.332626] RDP Terminal Client, WTware 6.0.56/RPi, pipe 4, pid 726.
18-19-59-785| [ rdpclient 726] [ 229.333260] Use /lib/ui32.so.
18-19-59-785| [ rdpclient 726] [ 229.334438] tsclient-main.cpp ( 757): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
18-19-59-785| [ rdpclient 726] [ 229.341326] Make RDP session with 192.168.1.108, port 3389.
18-19-59-785| [ rdpclient 726] [ 229.342113] No username.
18-19-59-785| [ rdpclient 726] [ 229.342700] No password.
18-19-59-785| [ rdpclient 726] [ 229.343276] No PIN.
18-19-59-785| [ rdpclient 726] [ 229.345444] No domain.
18-19-59-785| [ rdpclient 726] [ 229.346028] No shell.
18-19-59-785| [ rdpclient 726] [ 229.346352] No directory.
18-19-59-785| [ rdpclient 726] [ 229.346595] Window: 1856x1080@24.
18-19-59-785| [ rdpclient 726] [ 229.347142] PFlags 0x0000002F.
18-19-59-785| [ rdpclient 726] [ 229.347494] Keyboard 00000409:00000000.
18-19-59-785| [ rdpclient 726] [ 229.347921] My hostname "ERROR".
18-19-59-785| [ rdpclient 726] [ 229.348352] TCP: connecting to 192.168.1.108:3389.
18-19-59-785| [ rdpclient 726] [ 232.470643] Connection failed with errno 113.
18-19-59-785| [ rdpclient 726] [ 233.471047] Got errno: 103.
18-19-59-785| [ rdpclient 726] [ 233.471246] rdpclient-tcp.cpp ( 260): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
18-19-59-785| [ rdpclient 726] [ 233.471388] Server 192.168.1.108, port 3389: connection rejected.
18-19-59-785| Make sure that terminal service works on this server.
18-19-59-785| Try to connect using mstsc.exe.
18-19-59-785| [ gm] [ 233.473568] Session is over. Final message: Server 192.168.1.108, port 3389: connection rejected.
18-19-59-785| Make sure that terminal service works on this server.
18-19-59-785| Try to connect using mstsc.exe.
18-19-59-785| [ pfac] [ 233.474008] Process pid 726 terminated, status 00000009.
18-19-59-785| [ gm] [ 247.379465] Run '/sbin/resolver 0x1acebf0 dns [192.168.56.1]', log '', env '', pid ''.
18-19-59-785| [ pfac] [ 247.380409] Run /sbin/resolver 0x1acebf0 dns [192.168.56.1].
18-19-59-785| [ pfac] [ 247.380997] Ok, PID 727.
18-19-59-785| [ pfac] [ 247.392243] Process pid 727 terminated, status 00000000.
18-19-59-785| [ gm] [ 247.397453] 192.168.56.1 => 192.168.56.1.
18-19-59-785| [ gm] [ 247.409741] Free ram before fork terminal client /sbin/rdpclient (session 5): 894640 Kb.
18-19-59-785| [ pfac] [ 247.410165] Run /sbin/rdpclient 5.
18-19-59-785| [ gm] [ 247.410299] Run '/sbin/rdpclient 5', log '/tmp/rdpclient.out', env '', pid ''.
18-19-59-785| [ pfac] [ 247.410508] Ok, PID 728.
18-19-59-785| [ rdpclient 728] [ 247.436083] RDP Terminal Client, WTware 6.0.56/RPi, pipe 5, pid 728.
18-19-59-785| [ rdpclient 728] [ 247.436729] Use /lib/ui32.so.
18-19-59-785| [ rdpclient 728] [ 247.437827] tsclient-main.cpp ( 757): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
18-19-59-785| [ rdpclient 728] [ 247.441339] Make RDP session with 192.168.56.1, port 3389.
18-19-59-785| [ rdpclient 728] [ 247.441932] No username.
18-19-59-785| [ rdpclient 728] [ 247.442524] No password.
18-19-59-785| [ rdpclient 728] [ 247.442855] No PIN.
18-19-59-785| [ rdpclient 728] [ 247.443114] No domain.
18-19-59-785| [ rdpclient 728] [ 247.443346] No shell.
18-19-59-785| [ rdpclient 728] [ 247.443601] No directory.
18-19-59-785| [ rdpclient 728] [ 247.444098] Window: 1856x1080@24.
18-19-59-785| [ rdpclient 728] [ 247.444505] PFlags 0x0000002F.
18-19-59-785| [ rdpclient 728] [ 247.444824] Keyboard 00000409:00000000.
18-19-59-785| [ rdpclient 728] [ 247.445128] My hostname "ERROR".
18-19-59-785| [ rdpclient 728] [ 247.445530] TCP: connecting to 192.168.56.1:3389.
18-19-59-785| [ rdpclient 728] [ 277.472284] select () timed out.
18-19-59-785| [ rdpclient 728] [ 277.472548] rdpclient-tcp.cpp ( 260): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
18-19-59-785| [ rdpclient 728] [ 277.472705] Server 192.168.56.1, port 3389: connection rejected.
18-19-59-785| Make sure that terminal service works on this server.
18-19-59-785| Try to connect using mstsc.exe.
18-19-59-785| [ gm] [ 277.473334] Session is over. Final message: Server 192.168.56.1, port 3389: connection rejected.
18-19-59-785| Make sure that terminal service works on this server.
18-19-59-785| Try to connect using mstsc.exe.
18-19-59-785| [ pfac] [ 277.474645] Process pid 728 terminated, status 00000009.
18-19-59-785| Connection from wtc.exe at 192.168.1.101.
18-25-02-742| [WTRC] [15.09.2021 18:25:02] Conection with 192.168.1.109:789 failed.
18-25-04-076| [WTRC] [15.09.2021 18:25:04] Conection with 192.168.1.109:789 failed.