Hello.
I have a smart card reader connected to a raspberry pi 3 with which I connect via wtware to rdp on vm with windows 7 x 64 as the operating system on which I should digitally sign documents.
-Digital signature software is aruba sign.
https://ca.arubapec.it/downloads/ArubaSign-3.1.6.exe
- The smart card software link is
http://www.regione.toscana.it/documents ... d46b68a8ad
-The smart card reader's link
http://support.gemalto.com/fileadmin/us ... PcCCID.exe.
I recently tried using the DIKE program instead of Arubasign
Dike also asks me to insert the pin but later tell me that the certified are not found
This is the log that appears on vm when I connect to rdp by raspberry running sc_listReaders:
Context 0xcd10000-
Found reader: ‘ACS ACR39U ICC Reader 0’.
Found reader: ‘CASTLES EZCCID Smart Card Reader 0’.
Found reader: ‘Gemplus USB SmartCard Reader 0’.
Found card: “ Bit4id Athena 1”.
Found card: “ Bit4id ME CC 0”.
Found card: “ Bit4id ME CC 1”.
Found card: “ Bit4id ME FIPS 0”.
Found card: “ Bit4id ME FIPS V3”.
Found card: “ Bit4id ME Iz 0”.
Found card: “ Incard FFS”.
Found card: “ Incard JS2048”.
Found card: “ Incard JS2048DSD”.
Found card: “ Oberthur COSMO 0”.
Opening the aruba sign program says it does not find the smart card drivers or certificates
If I connect the smart card reader to a physical machine and with this I connect to a remote desktop at the usual VM I can sign the documents, the aruba sign program recognizes the paper and the certificates
This is the log on the physical machine that I connected the smart card reader to the inserted card:
Microsoft Windows [Versione 6.2.9200]
C:\>sc_listReaders
Context 0xcd010000.
Found reader: 'Gemalto USB Smart Card Reader 0'.
Found card: " Bit4id Athena 1".
Found card: " Incard FFS".
Found card: " Incard JS2048".
Found card: " Incard JS2048DSD".
Found card: " Oberthur COSMO 0".
Found card: " Oberthur COSMO 1".
Found card: " Oberthur COSMO 2".
Found card: " Oberthur COSMO 2048".
Found card: " Oberthur COSMO 2048CIE".
Found card: " Oberthur COSMO 3".
At the same time on the VM to which I link to sign the document, this log appears:
Microsoft Windows [Versione 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. Tutti i diritti riservati
C:\>sc_listReaders
Context 0xcd010000.
Found reader: 'Gemalto USB Smart Card Reader 0'.
Found card: " Bit4id Athena 1".
Found card: " Bit4id ME CC 0".
Found card: " Bit4id ME CC 1".
Found card: " Bit4id ME FIPS 0".
Found card: " Bit4id ME FIPS V3".
Found card: " Bit4id ME Iz 0".
Found card: " Incard FFS".
Found card: " Incard JS2048".
Found card: " Incard JS2048DSD".
Found card: " Oberthur COSMO 0".
This is my configuration file:
server= --new--
keyboard=it
language=it,default
graphic=abcdefg
sound=on,stereo
disk=usb
shared_disk=usb
printer=usb
scanner=on
smartcard=gempctwin, acr39u, ezzccid
I also asked if the following reader could be added:
Minilector Bit4id 38u
I kindly ask for a support if possible to solve the problem
I just wanted to know if the log files I sent you can be useful for the solution and if you need anything else.
Thanks
Hello.
I have a smart card reader connected to a raspberry pi 3 with which I connect via wtware to rdp on vm with windows 7 x 64 as the operating system on which I should digitally sign documents.
-Digital signature software is aruba sign. https://ca.arubapec.it/downloads/ArubaSign-3.1.6.exe
- The smart card software link is http://www.regione.toscana.it/documents/10180/13787134/WINDOWS+CARTA+1/11119c61-58e8-4183-9e6b-35d46b68a8ad
-The smart card reader's link http://support.gemalto.com/fileadmin/user_upload/drivers/GemPC_CCID_Generic/GemPcCCID.exe.
I recently tried using the DIKE program instead of Arubasign
Dike also asks me to insert the pin but later tell me that the certified are not found
This is the log that appears on vm when I connect to rdp by raspberry running sc_listReaders:
Context 0xcd10000-
Found reader: ‘ACS ACR39U ICC Reader 0’.
Found reader: ‘CASTLES EZCCID Smart Card Reader 0’.
Found reader: ‘Gemplus USB SmartCard Reader 0’.
Found card: “ Bit4id Athena 1”.
Found card: “ Bit4id ME CC 0”.
Found card: “ Bit4id ME CC 1”.
Found card: “ Bit4id ME FIPS 0”.
Found card: “ Bit4id ME FIPS V3”.
Found card: “ Bit4id ME Iz 0”.
Found card: “ Incard FFS”.
Found card: “ Incard JS2048”.
Found card: “ Incard JS2048DSD”.
Found card: “ Oberthur COSMO 0”.
Opening the aruba sign program says it does not find the smart card drivers or certificates
If I connect the smart card reader to a physical machine and with this I connect to a remote desktop at the usual VM I can sign the documents, the aruba sign program recognizes the paper and the certificates
This is the log on the physical machine that I connected the smart card reader to the inserted card:
Microsoft Windows [Versione 6.2.9200]
C:\>sc_listReaders
Context 0xcd010000.
Found reader: 'Gemalto USB Smart Card Reader 0'.
Found card: " Bit4id Athena 1".
Found card: " Incard FFS".
Found card: " Incard JS2048".
Found card: " Incard JS2048DSD".
Found card: " Oberthur COSMO 0".
Found card: " Oberthur COSMO 1".
Found card: " Oberthur COSMO 2".
Found card: " Oberthur COSMO 2048".
Found card: " Oberthur COSMO 2048CIE".
Found card: " Oberthur COSMO 3".
At the same time on the VM to which I link to sign the document, this log appears:
Microsoft Windows [Versione 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. Tutti i diritti riservati
C:\>sc_listReaders
Context 0xcd010000.
Found reader: 'Gemalto USB Smart Card Reader 0'.
Found card: " Bit4id Athena 1".
Found card: " Bit4id ME CC 0".
Found card: " Bit4id ME CC 1".
Found card: " Bit4id ME FIPS 0".
Found card: " Bit4id ME FIPS V3".
Found card: " Bit4id ME Iz 0".
Found card: " Incard FFS".
Found card: " Incard JS2048".
Found card: " Incard JS2048DSD".
Found card: " Oberthur COSMO 0".
This is my configuration file:
server= --new--
keyboard=it
language=it,default
graphic=abcdefg
sound=on,stereo
disk=usb
shared_disk=usb
printer=usb
scanner=on
smartcard=gempctwin, acr39u, ezzccid
I also asked if the following reader could be added:
Minilector Bit4id 38u
I kindly ask for a support if possible to solve the problem
I just wanted to know if the log files I sent you can be useful for the solution and if you need anything else.
Thanks