by PaulU » Thu Aug 28, 2008 1:10 pm
Hi All,
After my tests last night with the Beat Version 4.5.13 at home,
i decided to reinstall it and test again at work in the server room.
My test setup FAILED!!
Once again the Malformed RRQ error shows up, the only way around this
is to use Tftpd32 as the tftp server, and not the wtware Tftp server.
Once this issue was resolved i then found that when trying to PXE boot random machines in our IT suite, another error shows
The Message "Incorrect noddc value"
Any Ideas ??
Test Carried out on Dell Machines
Must remember this is a Beta..
And the software still don't like my Geode CPU's at all
Regards Paul...
Hi All,
After my tests last night with the Beat Version 4.5.13 at home,
i decided to reinstall it and test again at work in the server room.
My test setup FAILED!!
Once again the Malformed RRQ error shows up, the only way around this
is to use Tftpd32 as the tftp server, and not the wtware Tftp server.
Once this issue was resolved i then found that when trying to PXE boot random machines in our IT suite, another error shows
The Message "Incorrect noddc value"
Any Ideas ??
Test Carried out on Dell Machines
Must remember this is a Beta..
And the software still don't like my Geode CPU's at all
Regards Paul...