WTware 5.6.12/RPi supervisor. [ KERNEL] [ 0.000000] Booting Linux on physical CPU 0x0 [ KERNEL] [ 0.000000] Linux version 4.9.39 (aka@c12) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #9 SMP Sat Jul 29 14:51:22 +04 2017 [ KERNEL] [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ KERNEL] [ 0.000000] CPU: div instructions available: patching division code [ KERNEL] [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ KERNEL] [ 0.000000] OF: fdt:Machine model: Raspberry Pi 3 Model B Rev 1.2 [ KERNEL] [ 0.000000] cma: Reserved 8 MiB at 0x3a800000 [ KERNEL] [ 0.000000] Memory policy: Data cache writealloc [ KERNEL] [ 0.000000] On node 0 totalpages: 241664 [ KERNEL] [ 0.000000] free_area_init_node: node 0, pgdat 80b22f40, node_mem_map b9faa000 [ KERNEL] [ 0.000000] Normal zone: 2124 pages used for memmap [ KERNEL] [ 0.000000] Normal zone: 0 pages reserved [ KERNEL] [ 0.000000] Normal zone: 241664 pages, LIFO batch:31 [ KERNEL] [ 0.000000] percpu: Embedded 11 pages/cpu @b9f70000 s16076 r8192 d20788 u45056 [ KERNEL] [ 0.000000] pcpu-alloc: s16076 r8192 d20788 u45056 alloc=11*4096 [ KERNEL] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ KERNEL] [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 239540 [ KERNEL] [ 0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 quiet wtboot=mmc [ KERNEL] [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ KERNEL] [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ KERNEL] [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ KERNEL] [ 0.000000] Memory: 938116K/966656K available (5120K kernel code, 143K rwdata, 916K rodata, 4096K init, 373K bss, 20348K reserved, 8192K cma-reserved) [ KERNEL] [ 0.000000] Virtual kernel memory layout: [ KERNEL] [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ KERNEL] [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ KERNEL] [ 0.000000] vmalloc : 0xbb800000 - 0xff800000 (1088 MB) [ KERNEL] [ 0.000000] lowmem : 0x80000000 - 0xbb000000 ( 944 MB) [ KERNEL] [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB) [ KERNEL] [ 0.000000] .text : 0x80008000 - 0x80600000 (6112 kB) [ KERNEL] [ 0.000000] .init : 0x80700000 - 0x80b00000 (4096 kB) [ KERNEL] [ 0.000000] .data : 0x80b00000 - 0x80b23fd8 ( 144 kB) [ KERNEL] [ 0.000000] .bss : 0x80b25000 - 0x80b82660 ( 374 kB) [ KERNEL] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ KERNEL] [ 0.000000] Hierarchical RCU implementation. [ KERNEL] [ 0.000000] Build-time adjustment of leaf fanout to 32. [ KERNEL] [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ KERNEL] [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ KERNEL] [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ KERNEL] [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ KERNEL] [ 0.000019] Switching to timer-based delay loop, resolution 52ns [ KERNEL] [ 0.000237] Console: colour dummy device 80x30 [ KERNEL] [ 0.000254] console [tty0] enabled [ KERNEL] [ 0.000272] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ KERNEL] [ 0.000286] pid_max: default: 32768 minimum: 301 [ KERNEL] [ 0.000433] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ KERNEL] [ 0.000440] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ KERNEL] [ 0.001308] Disabling cpuset control group subsystem [ KERNEL] [ 0.001435] CPU: Testing write buffer coherency: ok [ KERNEL] [ 0.001886] CPU0: update cpu_capacity 1024 [ KERNEL] [ 0.001893] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ KERNEL] [ 0.001939] Setting up static identity map for 0x100000 - 0x100034 [ KERNEL] [ 0.003625] CPU1: update cpu_capacity 1024 [ KERNEL] [ 0.003632] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ KERNEL] [ 0.004195] CPU2: update cpu_capacity 1024 [ KERNEL] [ 0.004201] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ KERNEL] [ 0.004746] CPU3: update cpu_capacity 1024 [ KERNEL] [ 0.004752] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ KERNEL] [ 0.004825] Brought up 4 CPUs [ KERNEL] [ 0.004835] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ KERNEL] [ 0.004839] CPU: All CPU(s) started in HYP mode. [ KERNEL] [ 0.004842] CPU: Virtualization extensions available. [ KERNEL] [ 0.005375] devtmpfs: initialized [ KERNEL] [ 0.014917] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 [ KERNEL] [ 0.015299] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ KERNEL] [ 0.015314] futex hash table entries: 1024 (order: 4, 65536 bytes) [ KERNEL] [ 0.015790] pinctrl core: initialized pinctrl subsystem [ KERNEL] [ 0.016322] NET: Registered protocol family 16 [ KERNEL] [ 0.018156] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ KERNEL] [ 0.028254] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ KERNEL] [ 0.111158] bcm2835-dma 3f007000.dma: DMA legacy API manager at bb80f000, dmachans=0x1 [ KERNEL] [ 0.113497] usbcore: registered new interface driver usbfs [ KERNEL] [ 0.113624] usbcore: registered new interface driver hub [ KERNEL] [ 0.113707] usbcore: registered new device driver usb [ KERNEL] [ 0.120124] raspberrypi-firmware soc:firmware: Attached to firmware from 2017-07-21 23:56 [ KERNEL] [ 0.122381] clocksource: Switched to clocksource arch_sys_counter [ KERNEL] [ 0.137361] NET: Registered protocol family 2 [ KERNEL] [ 0.137934] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ KERNEL] [ 0.138042] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ KERNEL] [ 0.138226] TCP: Hash tables configured (established 8192 bind 8192) [ KERNEL] [ 0.138310] UDP hash table entries: 512 (order: 2, 16384 bytes) [ KERNEL] [ 0.138351] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ KERNEL] [ 0.138530] NET: Registered protocol family 1 [ KERNEL] [ 2.227059] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ KERNEL] [ 2.265237] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ KERNEL] [ 2.265248] io scheduler noop registered [ KERNEL] [ 2.265253] io scheduler deadline registered (default) [ KERNEL] [ 2.277973] BCM2708FB: allocated DMA memory fa910000 [ KERNEL] [ 2.278021] BCM2708FB: allocated DMA channel 0 @ bb80f000 [ KERNEL] [ 2.309021] Console: switching to colour frame buffer device 240x67 [ KERNEL] [ 2.330116] bcm2835-rng 3f104000.rng: hwrng registered [ KERNEL] [ 2.330345] vc-cma: Videocore CMA driver [ KERNEL] [ 2.330352] vc-cma: vc_cma_base = 0x00000000 [ KERNEL] [ 2.330357] vc-cma: vc_cma_size = 0x00000000 (0 MiB) [ KERNEL] [ 2.330361] vc-cma: vc_cma_initial = 0x00000000 (0 MiB) [ KERNEL] [ 2.330845] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB) [ KERNEL] [ 2.336693] zram: Added device: zram0 [ KERNEL] [ 2.336767] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ KERNEL] [ 2.564859] Core Release: 2.80a [ KERNEL] [ 2.564869] Setting default values for core params [ KERNEL] [ 2.564897] Finished setting default values for core params [ KERNEL] [ 2.765254] Using Buffer DMA mode [ KERNEL] [ 2.765259] Periodic Transfer Interrupt Enhancement - disabled [ KERNEL] [ 2.765263] Multiprocessor Interrupt Enhancement - disabled [ KERNEL] [ 2.765269] OTG VER PARAM: 0, OTG VER FLAG: 0 [ KERNEL] [ 2.765297] Dedicated Tx FIFOs mode [ KERNEL] [ 2.765821] WARN::dwc_otg_hcd_init:1032: FIQ DMA bounce buffers: virt = 0xba904000 dma = 0xfa904000 len=9024 [ KERNEL] [ 2.765845] FIQ FSM acceleration enabled for : [ KERNEL] [ 2.765845] Non-periodic Split Transactions [ KERNEL] [ 2.765845] Periodic Split Transactions [ KERNEL] [ 2.765845] High-Speed Isochronous Endpoints [ KERNEL] [ 2.765845] Interrupt/Control Split Transaction hack enabled [ KERNEL] [ 2.765851] dwc_otg: Microframe scheduler enabled [ KERNEL] [ 2.765895] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x80394034 [ KERNEL] [ 2.765903] WARN::hcd_init_fiq:460: FIQ ASM at 0x80394398 length 36 [ KERNEL] [ 2.765912] WARN::hcd_init_fiq:486: MPHI regs_base at 0xbb925000 [ KERNEL] [ 2.765967] dwc_otg 3f980000.usb: DWC OTG Controller [ KERNEL] [ 2.765998] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ KERNEL] [ 2.766028] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000 [ KERNEL] [ 2.766073] Init: Port Power? op_state=1 [ KERNEL] [ 2.766076] Init: Power Port (0) [ KERNEL] [ 2.766251] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ KERNEL] [ 2.766260] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ KERNEL] [ 2.766267] usb usb1: Product: DWC OTG Controller [ KERNEL] [ 2.766275] usb usb1: Manufacturer: Linux 4.9.39 dwc_otg_hcd [ KERNEL] [ 2.766281] usb usb1: SerialNumber: 3f980000.usb [ KERNEL] [ 2.767154] hub 1-0:1.0: USB hub found [ KERNEL] [ 2.767191] hub 1-0:1.0: 1 port detected [ KERNEL] [ 2.767876] dwc_otg: FIQ enabled [ KERNEL] [ 2.767880] dwc_otg: NAK holdoff enabled [ KERNEL] [ 2.767883] dwc_otg: FIQ split-transaction FSM enabled [ KERNEL] [ 2.767972] Module dwc_common_port init [ KERNEL] [ 2.768587] usbcore: registered new interface driver usbtouchscreen [ KERNEL] [ 2.770131] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer [ KERNEL] [ 2.770637] bcm2835-cpufreq: min=600000 max=1200000 [ KERNEL] [ 2.771786] sdhost-bcm2835 3f202000.sdhost: could not get clk, deferring probe [ KERNEL] [ 2.774166] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe [ KERNEL] [ 2.776607] ledtrig-cpu: registered to indicate activity on CPUs [ KERNEL] [ 2.776774] hidraw: raw HID events driver (C) Jiri Kosina [ KERNEL] [ 2.777517] usbcore: registered new interface driver usbhid [ KERNEL] [ 2.777525] usbhid: USB HID core driver [ KERNEL] [ 2.778666] vchiq: vchiq_init_state: slot_zero = 0xba980000, is_master = 0 [ KERNEL] [ 2.786006] NET: Registered protocol family 17 [ KERNEL] [ 2.786124] Registering SWP/SWPB emulation handler [ KERNEL] [ 2.786681] registered taskstats version 1 [ KERNEL] [ 2.786856] vc-sm: Videocore shared memory driver [ KERNEL] [ 2.786863] [vc_sm_connected_init]: start [ KERNEL] [ 2.793357] [vc_sm_connected_init]: end - returning 0 [ KERNEL] [ 2.796983] sdhost: log_buf @ ba907000 (fa907000) [ KERNEL] [ 2.882391] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ KERNEL] [ 2.884502] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0 [ KERNEL] [ 2.884506] mmc-bcm2835 3f300000.mmc: DMA channel allocated [ KERNEL] [ 2.949274] mmc0: host does not support reading read-only switch, assuming write-enable [ KERNEL] [ 2.951159] mmc0: new high speed SDHC card at address 59b4 [ KERNEL] [ 2.951525] mmcblk0: mmc0:59b4 USD 14.7 GiB [ KERNEL] [ 2.953000] mmcblk0: p1 [ KERNEL] [ 2.962501] of_cfs_init [ KERNEL] [ 2.962554] of_cfs_init: OK [ KERNEL] [ 2.973552] Freeing unused kernel memory: 4096K (80700000 - 80b00000) [ KERNEL] [ 2.992523] Indeed it is in host mode hprt0 = 00021501 [ KERNEL] [ 2.995450] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ KERNEL] [ 2.997002] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ KERNEL] [ 2.998510] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ KERNEL] [ 3.001182] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ KERNEL] [ 3.066047] random: fast init done [ KERNEL] [ 3.139357] mmc1: new high speed SDIO card at address 0001 [ KERNEL] [ 3.202604] usb 1-1: new high-speed USB device number 2 using dwc_otg [ KERNEL] [ 3.202756] Indeed it is in host mode hprt0 = 00001101 [ hotplug] [ 3.239063] Block device 254:0. No action. [ hotplug] [ 3.252705] Block device 179:1. No action. [ hotplug] [ 3.252808] Block device 179:0. No action. [ pfac] [ 3.295173] Run /sbin/initrd. [ pfac] [ 3.295410] Ok, PID 607. [ initrd] [ 3.299480] WTware shell 5.6.12/RPi [ initrd] [ 3.330156] HDD/MMC/SD boot. [ KERNEL] [ 3.442672] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 [ KERNEL] [ 3.442684] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ KERNEL] [ 3.443484] hub 1-1:1.0: USB hub found [ KERNEL] [ 3.443605] hub 1-1:1.0: 5 ports detected [ KERNEL] [ 3.762410] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ KERNEL] [ 3.892651] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 [ KERNEL] [ 3.892662] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ KERNEL] [ 3.992405] usb 1-1.2: new low-speed USB device number 4 using dwc_otg [ KERNEL] [ 4.127495] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c05a [ KERNEL] [ 4.127506] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ KERNEL] [ 4.127514] usb 1-1.2: Product: USB Optical Mouse [ KERNEL] [ 4.127521] usb 1-1.2: Manufacturer: Logitech [ KERNEL] [ 4.134707] input: Logitech USB Optical Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C05A.0001/input/input0 [ KERNEL] [ 4.135259] hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-3f980000.usb-1.2/input0 [ KERNEL] [ 4.242415] usb 1-1.3: new low-speed USB device number 5 using dwc_otg [ KERNEL] [ 4.391621] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c31c [ KERNEL] [ 4.391632] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ KERNEL] [ 4.391640] usb 1-1.3: Product: USB Keyboard [ KERNEL] [ 4.391647] usb 1-1.3: Manufacturer: Logitech [ KERNEL] [ 4.411277] input: Logitech USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:046D:C31C.0002/input/input1 [ KERNEL] [ 4.473763] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-3f980000.usb-1.3/input0 [ KERNEL] [ 4.502480] input: Logitech USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C31C.0003/input/input2 [ KERNEL] [ 4.572886] hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-3f980000.usb-1.3/input1 [ KERNEL] [ 4.672419] usb 1-1.4: new high-speed USB device number 6 using dwc_otg [ KERNEL] [ 4.810852] usb 1-1.4: New USB device found, idVendor=1dcc, idProduct=482b [ KERNEL] [ 4.810862] usb 1-1.4: New USB device strings: Mfr=10, Product=11, SerialNumber=12 [ KERNEL] [ 4.810869] usb 1-1.4: Product: PS667 [ KERNEL] [ 4.810876] usb 1-1.4: Manufacturer: Ambir Technology [ KERNEL] [ 4.810883] usb 1-1.4: SerialNumber: 667 [ initrd] [ 4.884782] Success: media /dev/mmcblk0p1 mounted to /bootmedia. /--- FILE "/bootmedia/config.txt" ----------------------- | # For more options and information see | # http://www.raspberrypi.org/documentation/configuration/config-txt.md | # Some settings may impact device functionality. See link above for details | # Uncomment if you get no picture on HDMI for a default "safe" mode. | #hdmi_safe=1 | # Uncomment this if your display has a black border of unused pixels visible | # and your display can output without overscan. | disable_overscan=1 | # Uncomment if hdmi display is not detected and composite is being output. | #hdmi_force_hotplug=1 | # Uncomment to force a specific HDMI mode (this will force VGA). | #hdmi_group=1 | #hdmi_mode=1 | # Force the monitor to HDMI mode so that sound will be sent over HDMI cable. | #hdmi_drive=2 | # Uncomment to increase signal to HDMI, if you have interference, blanking, or | # no display. | #config_hdmi_boost=4 | # Uncomment to overclock the arm. 700 MHz is the default. | #arm_freq=800 | disable_splash=1 | #hdmi_group=2 | # 800x600: hdmi_mode=9 | # 1024x768: hdmi_mode=16 | # 1280x1024: hdmi_mode=35 | # 1360x768: hdmi_mode=39 | # 1400x1050: hdmi_mode=42 | # 1440x900: hdmi_mode=47 | # 1600x1200: hdmi_mode=51 | # 1680x1050: hdmi_mode=58 | # 1366x768: hdmi_mode=81 | # 1920x1080: hdmi_mode=82 | # 1920x1200: hdmi_mode=69 | framebuffer_depth=32 | # Uncomment for 16-bit color. It is up to two | # times faster than default 32-bit. | #framebuffer_depth=16 | # Enable onboard audio (HDMI or jack). | dtparam=audio=on | # Removes the warning overlay. | #avoid_warnings=1 | # Additionally allows turbo when low-voltage is present. | #avoid_warnings=2 | hdmi_group=2 | hdmi_mode=82 | framebuffer_depth=16 \---------------------------------------------------- [ initrd] [ 4.890548] WTpassword present: 472512a160090f040f1268544e732cd7. [ KERNEL] [ 5.112414] usb 1-1.5: new high-speed USB device number 7 using dwc_otg [ KERNEL] [ 5.276323] usb 1-1.5: New USB device found, idVendor=045e, idProduct=0772 [ KERNEL] [ 5.276334] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ KERNEL] [ 5.276342] usb 1-1.5: Product: Microsoft® LifeCam Studio(TM) [ KERNEL] [ 5.276349] usb 1-1.5: Manufacturer: Microsoft [ KERNEL] [ 5.284452] hid-generic 0003:045E:0772.0004: hiddev0,hidraw3: USB HID v1.01 Device [Microsoft Microsoft® LifeCam Studio(TM)] on usb-3f980000.usb-1.5/input4 /--- FILE "/bootmedia/configs/initrd.wtc" ----------------------- | [BOM] | clientIP=192.168.0.158 | config=local | netmedia=ethernet | routerIP=192.168.0.1 | nameserverIP=4.2.2.1 | setupPassword=472512a160090f040f1268544e732cd7 \---------------------------------------------------- [ initrd] [ 6.903308] Load ethernet drivers. [ initrd] [ 6.903390] modprobe smsc95xx. [ KERNEL] [ 6.913005] smsc95xx v1.0.5 [ KERNEL] [ 7.017966] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:e0:2d:0f [ KERNEL] [ 7.018139] usbcore: registered new interface driver smsc95xx [ KERNEL] [ 7.114393] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ KERNEL] [ 8.845864] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 [ pfac] [ 8.917366] Run /sbin/httpd. [ initrd] [ 8.917437] WTpassword present: 472512a160090f040f1268544e732cd7. [ pfac] [ 8.917520] Ok, PID 660. WTC listener is active. WTC broadcast listener is active. Send broadcast WTCU discover. [ initrd] [ 8.919434] Run '/sbin/httpd', log '/tmp/httpd.out', env '', pid ''. [ httpd] [ 8.922035] HTTP Server, WTware 5.6.12/RPi [ initrd] [ 9.045514] USB: 045e:0772 Microsoft Corp. LifeCam Studio. [ initrd] [ 9.045654] USB: 046d:c31c Logitech, Inc. Keyboard K120. [ initrd] [ 9.045728] USB: 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter. [ initrd] [ 9.045801] USB: 0424:9514 Standard Microsystems Corp. SMC9514 Hub. [ initrd] [ 9.045872] USB: 1dcc:482b . [ initrd] [ 9.045954] USB: 046d:c05a Logitech, Inc. M90/M100 Optical Mouse. [ initrd] [ 9.046120] Copy /bootmedia/configs/config.wtc to /tmp/config.wtc. [ initrd] [ 9.046560] Common local disk config: /--- FILE "/tmp/config.wtc" ----------------------- | [BOM] | server = 192.168.0.233 | usb=045e:0772, 1dcc:482b \---------------------------------------------------- /--- FILE "/etc/config.compiled" ----------------------- | [BOM] | server=192.168.0.233 | usb=045e:0772, 1dcc:482b | connection \---------------------------------------------------- [ initrd] [ 9.047404] Hostname: "wtwB827EBE02D0F". Everyone can control terminal by RSH. RSH: listener is active. Send broadcast WTCU discover. [ httpd] [ 9.052131] Reread settings. [ httpd] [ 9.052281] Everyone can control terminal by HTTP. [ gm] [ 9.056546] WTware session manager 5.6.12/RPi. [ gm] [ 9.057493] Add keyboard event2: Logitech USB Keyboard. [ gm] [ 9.057572] Add keyboard event1: Logitech USB Keyboard. [ gm] [ 9.057645] EV_REL flag found. Add mouse event0: Logitech USB Optical Mouse. [ gm] [ 9.057791] Display mode: 1920x1080, 16 bit, 0 Hz, modeline "", DDC enabled, connector 0. [ gm] [ 9.076164] Framebuffer device found. [ gm] [ 9.076246] LINELENBYTES 3840 [ gm] [ 9.076317] VLEN 4147200 [ gm] [ 9.095410] Use /lib/ui16.so. [ gm] [ 9.129523] Run '/sbin/rdpdr[usb] 045e:0772', log '/tmp/rdpdr[usb].out', env '', pid ''. [ pfac] [ 9.129640] Run /sbin/rdpdr[usb] 045e:0772. [ gm] [ 9.129686] Run '/sbin/rdpdr[usb] 1dcc:482b', log '/tmp/rdpdr[usb].out', env '', pid ''. [ pfac] [ 9.129892] Ok, PID 662. [ pfac] [ 9.129989] Run /sbin/rdpdr[usb] 1dcc:482b. [ pfac] [ 9.130189] Ok, PID 663. [rdpdr-usb 045e:0772] [ 9.133457] RDP USB Redirector, WTware 5.6.12/RPi [rdpdr-usb 045e:0772] [ 9.137666] Device connected. USB Id 045e:0772, bus Id 1-1.5, BUSNUM 1, DEVNUM 7. [rdpdr-usb 1dcc:482b] [ 9.137789] RDP USB Redirector, WTware 5.6.12/RPi [rdpdr-usb 1dcc:482b] [ 9.140659] Device connected. USB Id 1dcc:482b, bus Id 1-1.4, BUSNUM 1, DEVNUM 6. [ gm] [ 9.187539] Run '/sbin/resolver 0x8ce998 dns [192.168.0.233]', log '', env '', pid ''. [ pfac] [ 9.187676] Run /sbin/resolver 0x8ce998 dns [192.168.0.233]. [ gm] [ 9.187727] Nobody can control terminal by VNC. [ pfac] [ 9.188010] Ok, PID 666. [ pfac] [ 9.193053] Process pid 666 terminated, status 00000000. [ gm] [ 9.194108] 192.168.0.233 => 192.168.0.233. [ gm] [ 9.208267] Free ram before fork terminal client /sbin/rdpclient (session 1): 926012 Kb. [ pfac] [ 9.208362] Run /sbin/rdpclient 1. [ gm] [ 9.208407] Run '/sbin/rdpclient 1', log '/tmp/rdpclient.out', env '', pid ''. [ pfac] [ 9.208672] Ok, PID 667. [ rdpclient 667] [ 9.216156] RDP Terminal Client, WTware 5.6.12/RPi, pipe 1, pid 667. [ rdpclient 667] [ 9.217137] Use /lib/ui16.so. [ rdpclient 667] [ 9.218647] Make RDP session with 192.168.0.233, port 3389. [ rdpclient 667] [ 9.218759] No username. [ rdpclient 667] [ 9.218839] No password. [ rdpclient 667] [ 9.218921] No PIN. [ rdpclient 667] [ 9.219103] No domain. [ rdpclient 667] [ 9.219184] No shell. [ rdpclient 667] [ 9.219267] No directory. [ rdpclient 667] [ 9.219347] Window: 1920x1080@16. [ rdpclient 667] [ 9.219435] PFlags 0x0000002F. [ rdpclient 667] [ 9.219546] Keyboard 00000409:00000000. [ rdpclient 667] [ 9.219651] My hostname "wtwB827EBE02D0F". [ rdpclient 667] [ 9.219733] TCP: connecting to 192.168.0.233:3389. [ rdpclient 667] [ 9.220428] TCP: connection with 192.168.0.233:3389 established. [ rdpclient 667] [ 9.220548] Turn keepalive on. [ rdpclient 667] [ 9.221825] Free ram after buffers allocation: 925724 KB. [ rdpclient 667] [ 9.243509] Reconnect with TLS/SSL enabled. [ rdpclient 667] [ 9.243632] TCP: reconnecting to 192.168.0.233:3389. [ rdpclient 667] [ 9.244116] TCP: connection with 192.168.0.233:3389 established. [ rdpclient 667] [ 9.244201] Turn keepalive on. [ rdpclient 667] [ 9.259822] Server supports GFX Pipeline. [ rdpclient 667] [ 9.259938] TLS. [ rdpclient 667] [ 9.260049] SSL/TLS. [ rdpclient 667] [ 9.306070] Enable font smoothing and Desktop Composition. [ rdpclient 667] [ 9.406754] GFX codec. [ KERNEL] [ 12.205411] random: crng init done [ rdpclient 667] [ 13.556219] LOGON_EX_LOGONERRORS: ErrorNotificationType 0xfffffffe, ErrorNotificationData 0x00000002. [ rdpclient 667] [ 13.904568] SessionId 0x00000002: DESKTOP-65D8T17\teller. [rdpdr-usb 045e:0772] [ 14.518084] Too many (5) TS_USBD_INTERFACE_INFORMATION. [rdpdr-usb 045e:0772] [ 14.518292] rdpdr[usb]-main.cpp ( 274): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support. [rdpdr-usb 045e:0772] [ 14.518428] rdpdr[usb]-main.cpp ( 1451): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support. [ rdpclient 667] [ 16.541843] Run 4 tile threads. [rdpdr-usb 045e:0772] [ 19.517805] Cancel non-existing request 0x00000000. [ httpd] [ 58.396377] SSL_accept() failed, ret 0, error code 5. [ httpd] [ 58.396522] httpd.cpp ( 152): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support. [ httpd] [ 58.401807] SSL_accept() failed, ret 0, error code 5. [ httpd] [ 58.401942] httpd.cpp ( 152): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support. [ httpd] [ 64.265270] SSL_accept() failed, ret 0, error code 5. [ httpd] [ 64.265410] httpd.cpp ( 152): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support. [ httpd] [ 64.270089] SSL_accept() failed, ret 0, error code 5. [ httpd] [ 64.270202] httpd.cpp ( 152): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support. [ httpd] [ 327.168976] SSL_accept() failed, ret 0, error code 5. [ httpd] [ 327.169138] httpd.cpp ( 152): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support. [ httpd] [ 327.174607] SSL_accept() failed, ret 0, error code 5. [ httpd] [ 327.174720] httpd.cpp ( 152): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.